1 files changed, 0 insertions, 72 deletions
diff --git a/board/atmel/at91cap9adk/nand.c b/board/atmel/at91cap9adk/nand.c
deleted file mode 100644
index cc2263b023..0000000000
--- a/board/atmel/at91cap9adk/nand.c
+++ /dev/null
@@ -1,72 +0,0 @@
-/*
- * (C) Copyright 2007-2008
- * Stelian Pop <stelian.pop@leadtechdesign.com>
- * Lead Tech Design <www.leadtechdesign.com>
- *
- * (C) Copyright 2006 ATMEL Rousset, Lacressonniere Nicolas
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-#include <asm/arch/at91cap9.h>
-#include <asm/arch/gpio.h>
-#include <asm/arch/at91_pio.h>
-
-#include <nand.h>
-
-/*
- *	hardware specific access to control-lines
- */
-#define	MASK_ALE	(1 << 21)	/* our ALE is AD21 */
-#define	MASK_CLE	(1 << 22)	/* our CLE is AD22 */
-
-static void at91cap9adk_nand_hwcontrol(struct mtd_info *mtd,
-				       int cmd, unsigned int ctrl)
-{
-	struct nand_chip *this = mtd->priv;
-
-	if (ctrl & NAND_CTRL_CHANGE) {
-		ulong IO_ADDR_W = (ulong) this->IO_ADDR_W;
-		IO_ADDR_W &= ~(MASK_ALE | MASK_CLE);
-
-		if (ctrl & NAND_CLE)
-			IO_ADDR_W |= MASK_CLE;
-		if (ctrl & NAND_ALE)
-			IO_ADDR_W |= MASK_ALE;
-
-		at91_set_gpio_value(AT91_PIN_PD15, !(ctrl & NAND_NCE));
-		this->IO_ADDR_W = (void *) IO_ADDR_W;
-	}
-
-	if (cmd != NAND_CMD_NONE)
-		writeb(cmd, this->IO_ADDR_W);
-}
-
-int board_nand_init(struct nand_chip *nand)
-{
-	nand->ecc.mode = NAND_ECC_SOFT;
-#ifdef CONFIG_SYS_NAND_DBW_16
-	nand->options = NAND_BUSWIDTH_16;
-#endif
-	nand->cmd_ctrl = at91cap9adk_nand_hwcontrol;
-	nand->chip_delay = 20;
-
-	return 0;
-}