5 files changed, 0 insertions, 491 deletions
diff --git a/board/atmel/at91cap9adk/Makefile b/board/atmel/at91cap9adk/Makefile
deleted file mode 100644
index 2eec0ce231..0000000000
--- a/board/atmel/at91cap9adk/Makefile
+++ /dev/null
@@ -1,56 +0,0 @@
-#
-# (C) Copyright 2003-2008
-# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
-#
-# (C) Copyright 2008
-# Stelian Pop <stelian.pop@leadtechdesign.com>
-# Lead Tech Design <www.leadtechdesign.com>
-#
-# See file CREDITS for list of people who contributed to this
-# project.
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License as
-# published by the Free Software Foundation; either version 2 of
-# the License, or (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-# MA 02111-1307 USA
-#
-
-include $(TOPDIR)/config.mk
-
-LIB	= $(obj)lib$(BOARD).o
-
-COBJS-y	+= at91cap9adk.o
-COBJS-y	+= led.o
-COBJS-$(CONFIG_HAS_DATAFLASH) += partition.o
-
-SRCS    := $(SOBJS:.o=.S) $(COBJS-y:.o=.c)
-OBJS    := $(addprefix $(obj),$(COBJS-y))
-SOBJS	:= $(addprefix $(obj),$(SOBJS))
-
-$(LIB):	$(obj).depend $(OBJS) $(SOBJS)
-	$(call cmd_link_o_target, $(OBJS) $(SOBJS))
-
-clean:
-	rm -f $(SOBJS) $(OBJS)
-
-distclean:	clean
-	rm -f $(LIB) core *.bak $(obj).depend
-
-#########################################################################
-
-# defines $(obj).depend target
-include $(SRCTREE)/rules.mk
-
-sinclude $(obj).depend
-
-#########################################################################
diff --git a/board/atmel/at91cap9adk/at91cap9adk.c b/board/atmel/at91cap9adk/at91cap9adk.c
deleted file mode 100644
index 2ab8bc2c43..0000000000
--- a/board/atmel/at91cap9adk/at91cap9adk.c
+++ /dev/null
@@ -1,352 +0,0 @@
-/*
- * (C) Copyright 2007-2008
- * Stelian Pop <stelian.pop@leadtechdesign.com>
- * Lead Tech Design <www.leadtechdesign.com>
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-#include <asm/arch/at91cap9.h>
-#include <asm/arch/at91cap9_matrix.h>
-#include <asm/arch/at91sam9_smc.h>
-#include <asm/arch/at91_common.h>
-#include <asm/arch/at91_pmc.h>
-#include <asm/arch/at91_rstc.h>
-#include <asm/arch/clk.h>
-#include <asm/arch/gpio.h>
-#include <asm/arch/io.h>
-#include <asm/arch/hardware.h>
-#include <lcd.h>
-#include <atmel_lcdc.h>
-#if defined(CONFIG_RESET_PHY_R) && defined(CONFIG_MACB)
-#include <net.h>
-#endif
-#include <netdev.h>
-
-#define MP_BLOCK_3_BASE	0xFDF00000
-
-DECLARE_GLOBAL_DATA_PTR;
-
-/* ------------------------------------------------------------------------- */
-/*
- * Miscelaneous platform dependent initialisations
- */
-
-static void at91cap9_slowclock_hw_init(void)
-{
-	/*
-	 * On AT91CAP9 revC CPUs, the slow clock can be based on an
-	 * internal impreciseRC oscillator or an external 32kHz oscillator.
-	 * Switch to the latter.
-	 */
-#define ARCH_ID_AT91CAP9_REVB	0x399
-#define ARCH_ID_AT91CAP9_REVC	0x601
-	if (at91_sys_read(AT91_PMC_VER) == ARCH_ID_AT91CAP9_REVC) {
-		unsigned i, tmp = at91_sys_read(AT91_SCKCR);
-		if ((tmp & AT91CAP9_SCKCR_OSCSEL) == AT91CAP9_SCKCR_OSCSEL_RC) {
-			timer_init();
-			tmp |= AT91CAP9_SCKCR_OSC32EN;
-			at91_sys_write(AT91_SCKCR, tmp);
-			for (i = 0; i < 1200; i++)
-				udelay(1000);
-			tmp |= AT91CAP9_SCKCR_OSCSEL_32;
-			at91_sys_write(AT91_SCKCR, tmp);
-			udelay(200);
-			tmp &= ~AT91CAP9_SCKCR_RCEN;
-			at91_sys_write(AT91_SCKCR, tmp);
-		}
-	}
-}
-
-static void at91cap9_nor_hw_init(void)
-{
-	unsigned long csa;
-
-	/* Ensure EBI supply is 3.3V */
-	csa = at91_sys_read(AT91_MATRIX_EBICSA);
-	at91_sys_write(AT91_MATRIX_EBICSA,
-		       csa | AT91_MATRIX_EBI_VDDIOMSEL_3_3V);
-	/* Configure SMC CS0 for parallel flash */
-	at91_sys_write(AT91_SMC_SETUP(0),
-		       AT91_SMC_NWESETUP_(4) | AT91_SMC_NCS_WRSETUP_(2) |
-		       AT91_SMC_NRDSETUP_(4) | AT91_SMC_NCS_RDSETUP_(2));
-	at91_sys_write(AT91_SMC_PULSE(0),
-		       AT91_SMC_NWEPULSE_(8) | AT91_SMC_NCS_WRPULSE_(10) |
-		       AT91_SMC_NRDPULSE_(8) | AT91_SMC_NCS_RDPULSE_(10));
-	at91_sys_write(AT91_SMC_CYCLE(0),
-		       AT91_SMC_NWECYCLE_(16) | AT91_SMC_NRDCYCLE_(16));
-	at91_sys_write(AT91_SMC_MODE(0),
-		       AT91_SMC_READMODE | AT91_SMC_WRITEMODE |
-		       AT91_SMC_EXNWMODE_DISABLE | AT91_SMC_BAT_WRITE |
-		       AT91_SMC_DBW_16 | AT91_SMC_TDF_(1));
-}
-
-#ifdef CONFIG_CMD_NAND
-static void at91cap9_nand_hw_init(void)
-{
-	unsigned long csa;
-
-	/* Enable CS3 */
-	csa = at91_sys_read(AT91_MATRIX_EBICSA);
-	at91_sys_write(AT91_MATRIX_EBICSA,
-		       csa | AT91_MATRIX_EBI_CS3A_SMC_SMARTMEDIA |
-		       AT91_MATRIX_EBI_VDDIOMSEL_3_3V);
-
-	/* Configure SMC CS3 for NAND/SmartMedia */
-	at91_sys_write(AT91_SMC_SETUP(3),
-		       AT91_SMC_NWESETUP_(2) | AT91_SMC_NCS_WRSETUP_(1) |
-		       AT91_SMC_NRDSETUP_(2) | AT91_SMC_NCS_RDSETUP_(1));
-	at91_sys_write(AT91_SMC_PULSE(3),
-		       AT91_SMC_NWEPULSE_(4) | AT91_SMC_NCS_WRPULSE_(6) |
-		       AT91_SMC_NRDPULSE_(4) | AT91_SMC_NCS_RDPULSE_(6));
-	at91_sys_write(AT91_SMC_CYCLE(3),
-		       AT91_SMC_NWECYCLE_(8) | AT91_SMC_NRDCYCLE_(8));
-	at91_sys_write(AT91_SMC_MODE(3),
-		       AT91_SMC_READMODE | AT91_SMC_WRITEMODE |
-		       AT91_SMC_EXNWMODE_DISABLE |
-#ifdef CONFIG_SYS_NAND_DBW_16
-		       AT91_SMC_DBW_16 |
-#else /* CONFIG_SYS_NAND_DBW_8 */
-		       AT91_SMC_DBW_8 |
-#endif
-		       AT91_SMC_TDF_(1));
-
-	at91_sys_write(AT91_PMC_PCER, 1 << AT91CAP9_ID_PIOABCD);
-
-	/* RDY/BSY is not connected */
-
-	/* Enable NandFlash */
-	at91_set_gpio_output(CONFIG_SYS_NAND_ENABLE_PIN, 1);
-}
-#endif
-
-#ifdef CONFIG_MACB
-static void at91cap9_macb_hw_init(void)
-{
-	/* Enable clock */
-	at91_sys_write(AT91_PMC_PCER, 1 << AT91CAP9_ID_EMAC);
-
-	/*
-	 * Disable pull-up on:
-	 *	RXDV (PB22) => PHY normal mode (not Test mode)
-	 *	ERX0 (PB25) => PHY ADDR0
-	 *	ERX1 (PB26) => PHY ADDR1 => PHYADDR = 0x0
-	 *
-	 * PHY has internal pull-down
-	 */
-	writel(pin_to_mask(AT91_PIN_PB22) |
-	       pin_to_mask(AT91_PIN_PB25) |
-	       pin_to_mask(AT91_PIN_PB26),
-	       pin_to_controller(AT91_PIN_PA0) + PIO_PUDR);
-
-	/* Need to reset PHY -> 500ms reset */
-	at91_sys_write(AT91_RSTC_MR, AT91_RSTC_KEY |
-				     (AT91_RSTC_ERSTL & (0x0D << 8)) |
-				     AT91_RSTC_URSTEN);
-
-	at91_sys_write(AT91_RSTC_CR, AT91_RSTC_KEY | AT91_RSTC_EXTRST);
-
-	/* Wait for end hardware reset */
-	while (!(at91_sys_read(AT91_RSTC_SR) & AT91_RSTC_NRSTL));
-
-	/* Restore NRST value */
-	at91_sys_write(AT91_RSTC_MR, AT91_RSTC_KEY |
-				     (AT91_RSTC_ERSTL & (0x0 << 8)) |
-				     AT91_RSTC_URSTEN);
-
-	/* Re-enable pull-up */
-	writel(pin_to_mask(AT91_PIN_PB22) |
-	       pin_to_mask(AT91_PIN_PB25) |
-	       pin_to_mask(AT91_PIN_PB26),
-	       pin_to_controller(AT91_PIN_PA0) + PIO_PUER);
-
-	at91_macb_hw_init();
-
-	/* Unlock EMAC, 3 0 2 1 sequence */
-#define MP_MAC_KEY0	0x5969cb2a
-#define MP_MAC_KEY1	0xb4a1872e
-#define MP_MAC_KEY2	0x05683fbc
-#define MP_MAC_KEY3	0x3634fba4
-#define UNLOCK_MAC	0x00000008
-	writel(MP_MAC_KEY3, MP_BLOCK_3_BASE + 0x3c);
-	writel(MP_MAC_KEY0, MP_BLOCK_3_BASE + 0x30);
-	writel(MP_MAC_KEY2, MP_BLOCK_3_BASE + 0x38);
-	writel(MP_MAC_KEY1, MP_BLOCK_3_BASE + 0x34);
-	writel(UNLOCK_MAC, MP_BLOCK_3_BASE + 0x40);
-}
-#endif
-
-#ifdef CONFIG_USB_OHCI_NEW
-static void at91cap9_uhp_hw_init(void)
-{
-	/* Unlock USB OHCI, 3 2 0 1 sequence */
-#define MP_OHCI_KEY0	0x896c11ca
-#define MP_OHCI_KEY1	0x68ebca21
-#define MP_OHCI_KEY2	0x4823efbc
-#define MP_OHCI_KEY3	0x8651aae4
-#define UNLOCK_OHCI	0x00000010
-	writel(MP_OHCI_KEY3, MP_BLOCK_3_BASE + 0x3c);
-	writel(MP_OHCI_KEY2, MP_BLOCK_3_BASE + 0x38);
-	writel(MP_OHCI_KEY0, MP_BLOCK_3_BASE + 0x30);
-	writel(MP_OHCI_KEY1, MP_BLOCK_3_BASE + 0x34);
-	writel(UNLOCK_OHCI, MP_BLOCK_3_BASE + 0x40);
-}
-#endif
-
-#ifdef CONFIG_LCD
-vidinfo_t panel_info = {
-	vl_col:		240,
-	vl_row:		320,
-	vl_clk:		4965000,
-	vl_sync:	ATMEL_LCDC_INVLINE_INVERTED |
-			ATMEL_LCDC_INVFRAME_INVERTED,
-	vl_bpix:	3,
-	vl_tft:		1,
-	vl_hsync_len:	5,
-	vl_left_margin:	1,
-	vl_right_margin:33,
-	vl_vsync_len:	1,
-	vl_upper_margin:1,
-	vl_lower_margin:0,
-	mmio:		AT91CAP9_LCDC_BASE,
-};
-
-void lcd_enable(void)
-{
-	at91_set_gpio_value(AT91_PIN_PC0, 0);  /* power up */
-}
-
-void lcd_disable(void)
-{
-	at91_set_gpio_value(AT91_PIN_PC0, 1);  /* power down */
-}
-
-static void at91cap9_lcd_hw_init(void)
-{
-	at91_set_A_periph(AT91_PIN_PC1, 0);	/* LCDHSYNC */
-	at91_set_A_periph(AT91_PIN_PC2, 0);	/* LCDDOTCK */
-	at91_set_A_periph(AT91_PIN_PC3, 0);	/* LCDDEN */
-	at91_set_B_periph(AT91_PIN_PB9, 0);	/* LCDCC */
-	at91_set_A_periph(AT91_PIN_PC6, 0);	/* LCDD2 */
-	at91_set_A_periph(AT91_PIN_PC7, 0);	/* LCDD3 */
-	at91_set_A_periph(AT91_PIN_PC8, 0);	/* LCDD4 */
-	at91_set_A_periph(AT91_PIN_PC9, 0);	/* LCDD5 */
-	at91_set_A_periph(AT91_PIN_PC10, 0);	/* LCDD6 */
-	at91_set_A_periph(AT91_PIN_PC11, 0);	/* LCDD7 */
-	at91_set_A_periph(AT91_PIN_PC14, 0);	/* LCDD10 */
-	at91_set_A_periph(AT91_PIN_PC15, 0);	/* LCDD11 */
-	at91_set_A_periph(AT91_PIN_PC16, 0);	/* LCDD12 */
-	at91_set_A_periph(AT91_PIN_PC17, 0);	/* LCDD13 */
-	at91_set_A_periph(AT91_PIN_PC18, 0);	/* LCDD14 */
-	at91_set_A_periph(AT91_PIN_PC19, 0);	/* LCDD15 */
-	at91_set_A_periph(AT91_PIN_PC22, 0);	/* LCDD18 */
-	at91_set_A_periph(AT91_PIN_PC23, 0);	/* LCDD19 */
-	at91_set_A_periph(AT91_PIN_PC24, 0);	/* LCDD20 */
-	at91_set_A_periph(AT91_PIN_PC25, 0);	/* LCDD21 */
-	at91_set_A_periph(AT91_PIN_PC26, 0);	/* LCDD22 */
-	at91_set_A_periph(AT91_PIN_PC27, 0);	/* LCDD23 */
-
-	at91_sys_write(AT91_PMC_PCER, 1 << AT91CAP9_ID_LCDC);
-
-	gd->fb_base = 0;
-}
-
-#ifdef CONFIG_LCD_INFO
-#include <nand.h>
-#include <version.h>
-
-void lcd_show_board_info(void)
-{
-	ulong dram_size, nand_size;
-	int i;
-	char temp[32];
-
-	lcd_printf ("%s\n", U_BOOT_VERSION);
-	lcd_printf ("(C) 2008 ATMEL Corp\n");
-	lcd_printf ("at91support@atmel.com\n");
-	lcd_printf ("%s CPU at %s MHz\n",
-		CONFIG_SYS_AT91_CPU_NAME,
-		strmhz(temp, get_cpu_clk_rate()));
-
-	dram_size = 0;
-	for (i = 0; i < CONFIG_NR_DRAM_BANKS; i++)
-		dram_size += gd->bd->bi_dram[i].size;
-	nand_size = 0;
-	for (i = 0; i < CONFIG_SYS_MAX_NAND_DEVICE; i++)
-		nand_size += nand_info[i].size;
-	lcd_printf ("  %ld MB SDRAM, %ld MB NAND\n",
-		dram_size >> 20,
-		nand_size >> 20 );
-}
-#endif /* CONFIG_LCD_INFO */
-#endif
-
-int board_init(void)
-{
-	/* Enable Ctrlc */
-	console_init_f();
-
-	/* arch number of AT91CAP9ADK-Board */
-	gd->bd->bi_arch_number = MACH_TYPE_AT91CAP9ADK;
-	/* adress of boot parameters */
-	gd->bd->bi_boot_params = PHYS_SDRAM + 0x100;
-
-	at91_serial_hw_init();
-	at91cap9_slowclock_hw_init();
-	at91cap9_nor_hw_init();
-#ifdef CONFIG_CMD_NAND
-	at91cap9_nand_hw_init();
-#endif
-#ifdef CONFIG_HAS_DATAFLASH
-	at91_spi0_hw_init(1 << 0);
-#endif
-#ifdef CONFIG_MACB
-	at91cap9_macb_hw_init();
-#endif
-#ifdef CONFIG_USB_OHCI_NEW
-	at91cap9_uhp_hw_init();
-#endif
-#ifdef CONFIG_LCD
-	at91cap9_lcd_hw_init();
-#endif
-	return 0;
-}
-
-int dram_init(void)
-{
-	gd->bd->bi_dram[0].start = PHYS_SDRAM;
-	gd->bd->bi_dram[0].size = PHYS_SDRAM_SIZE;
-	return 0;
-}
-
-#ifdef CONFIG_RESET_PHY_R
-void reset_phy(void)
-{
-}
-#endif
-
-int board_eth_init(bd_t *bis)
-{
-	int rc = 0;
-#ifdef CONFIG_MACB
-	rc = macb_eth_initialize(0, (void *)AT91CAP9_BASE_EMAC, 0x00);
-#endif
-	return rc;
-}
diff --git a/board/atmel/at91cap9adk/config.mk b/board/atmel/at91cap9adk/config.mk
deleted file mode 100644
index 797da0eafe..0000000000
--- a/board/atmel/at91cap9adk/config.mk
+++ /dev/null
@@ -1 +0,0 @@
-CONFIG_SYS_TEXT_BASE = 0x73000000
diff --git a/board/atmel/at91cap9adk/led.c b/board/atmel/at91cap9adk/led.c
deleted file mode 100644
index 14aea994e9..0000000000
--- a/board/atmel/at91cap9adk/led.c
+++ /dev/null
@@ -1,43 +0,0 @@
-/*
- * (C) Copyright 2007-2008
- * Stelian Pop <stelian.pop@leadtechdesign.com>
- * Lead Tech Design <www.leadtechdesign.com>
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-#include <asm/arch/at91cap9.h>
-#include <asm/arch/at91_pmc.h>
-#include <asm/arch/gpio.h>
-#include <asm/arch/io.h>
-
-void coloured_LED_init(void)
-{
-	/* Enable clock */
-	at91_sys_write(AT91_PMC_PCER, 1 << AT91CAP9_ID_PIOABCD);
-
-	at91_set_gpio_output(CONFIG_RED_LED, 1);
-	at91_set_gpio_output(CONFIG_GREEN_LED, 1);
-	at91_set_gpio_output(CONFIG_YELLOW_LED, 1);
-
-	at91_set_gpio_output(CONFIG_RED_LED, 0);
-	at91_set_gpio_output(CONFIG_GREEN_LED, 1);
-	at91_set_gpio_output(CONFIG_YELLOW_LED, 1);
-}
diff --git a/board/atmel/at91cap9adk/partition.c b/board/atmel/at91cap9adk/partition.c
deleted file mode 100644
index 7e1d46f530..0000000000
--- a/board/atmel/at91cap9adk/partition.c
+++ /dev/null
@@ -1,39 +0,0 @@
-/*
- * (C) Copyright 2008
- * Ulf Samuelsson <ulf@atmel.com>
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- *
- */
-#include <common.h>
-#include <config.h>
-#include <asm/hardware.h>
-#include <dataflash.h>
-
-AT91S_DATAFLASH_INFO dataflash_info[CONFIG_SYS_MAX_DATAFLASH_BANKS];
-
-struct dataflash_addr cs[CONFIG_SYS_MAX_DATAFLASH_BANKS] = {
-	{CONFIG_SYS_DATAFLASH_LOGIC_ADDR_CS0, 0},	/* Logical adress, CS */
-};
-
-/*define the area offsets*/
-dataflash_protect_t area_list[NB_DATAFLASH_AREA] = {
-	{0x00000000, 0x000041FF, FLAG_PROTECT_SET,   0, "Bootstrap"},
-	{0x00004200, 0x000083FF, FLAG_PROTECT_CLEAR, 0, "Environment"},
-	{0x00008400, 0x00041FFF, FLAG_PROTECT_SET,   0, "U-Boot"},
-	{0x00042000, 0x00251FFF, FLAG_PROTECT_CLEAR, 0,	"Kernel"},
-	{0x00252000, 0xFFFFFFFF, FLAG_PROTECT_CLEAR, 0,	"FS"},
-};