summaryrefslogtreecommitdiff
path: root/board/atmel/at91sam9263ek/at91sam9263ek.c
diff options
context:
space:
mode:
Diffstat (limited to 'board/atmel/at91sam9263ek/at91sam9263ek.c')
-rw-r--r--board/atmel/at91sam9263ek/at91sam9263ek.c25
1 files changed, 23 insertions, 2 deletions
diff --git a/board/atmel/at91sam9263ek/at91sam9263ek.c b/board/atmel/at91sam9263ek/at91sam9263ek.c
index 57d5c953f7..0b7065b715 100644
--- a/board/atmel/at91sam9263ek/at91sam9263ek.c
+++ b/board/atmel/at91sam9263ek/at91sam9263ek.c
@@ -91,6 +91,8 @@ static void at91sam9263ek_nand_hw_init(void)
#ifdef CONFIG_MACB
static void at91sam9263ek_macb_hw_init(void)
{
+ unsigned long rstc;
+
/* Enable clock */
at91_sys_write(AT91_PMC_PCER, 1 << AT91SAM9263_ID_EMAC);
@@ -108,6 +110,8 @@ static void at91sam9263ek_macb_hw_init(void)
pin_to_mask(AT91_PIN_PE26),
pin_to_controller(AT91_PIN_PE0) + PIO_PUDR);
+ rstc = at91_sys_read(AT91_RSTC_MR) & AT91_RSTC_ERSTL;
+
/* Need to reset PHY -> 500ms reset */
at91_sys_write(AT91_RSTC_MR, AT91_RSTC_KEY |
(AT91_RSTC_ERSTL & (0x0D << 8)) |
@@ -120,7 +124,7 @@ static void at91sam9263ek_macb_hw_init(void)
/* Restore NRST value */
at91_sys_write(AT91_RSTC_MR, AT91_RSTC_KEY |
- (AT91_RSTC_ERSTL & (0x0 << 8)) |
+ (rstc) |
AT91_RSTC_URSTEN);
/* Re-enable pull-up */
@@ -196,9 +200,16 @@ static void at91sam9263ek_lcd_hw_init(void)
#include <nand.h>
#include <version.h>
+#ifndef CONFIG_SYS_NO_FLASH
+extern flash_info_t flash_info[];
+#endif
+
void lcd_show_board_info(void)
{
ulong dram_size, nand_size;
+#ifndef CONFIG_SYS_NO_FLASH
+ ulong flash_size;
+#endif
int i;
char temp[32];
@@ -215,9 +226,19 @@ void lcd_show_board_info(void)
nand_size = 0;
for (i = 0; i < CONFIG_SYS_MAX_NAND_DEVICE; i++)
nand_size += nand_info[i].size;
- lcd_printf (" %ld MB SDRAM, %ld MB NAND\n",
+#ifndef CONFIG_SYS_NO_FLASH
+ flash_size = 0;
+ for (i = 0; i < CONFIG_SYS_MAX_FLASH_BANKS; i++)
+ flash_size += flash_info[i].size;
+#endif
+ lcd_printf (" %ld MB SDRAM, %ld MB NAND",
dram_size >> 20,
nand_size >> 20 );
+#ifndef CONFIG_SYS_NO_FLASH
+ lcd_printf (",\n %ld MB NOR",
+ flash_size >> 20);
+#endif
+ lcd_puts ("\n");
}
#endif /* CONFIG_LCD_INFO */
#endif