summaryrefslogtreecommitdiff
path: root/board/bf548-ezkit/video.c
diff options
context:
space:
mode:
Diffstat (limited to 'board/bf548-ezkit/video.c')
-rw-r--r--board/bf548-ezkit/video.c335
1 files changed, 0 insertions, 335 deletions
diff --git a/board/bf548-ezkit/video.c b/board/bf548-ezkit/video.c
deleted file mode 100644
index 37659932f2..0000000000
--- a/board/bf548-ezkit/video.c
+++ /dev/null
@@ -1,335 +0,0 @@
-/*
- * video.c - run splash screen on lcd
- *
- * Copyright (c) 2007-2008 Analog Devices Inc.
- *
- * Licensed under the GPL-2 or later.
- */
-
-#include <stdarg.h>
-#include <common.h>
-#include <config.h>
-#include <malloc.h>
-#include <asm/blackfin.h>
-#include <asm/gpio.h>
-#include <asm/portmux.h>
-#include <asm/mach-common/bits/dma.h>
-#include <i2c.h>
-#include <linux/types.h>
-#include <stdio_dev.h>
-
-#include <lzma/LzmaTypes.h>
-#include <lzma/LzmaDec.h>
-#include <lzma/LzmaTools.h>
-
-#define DMA_SIZE16 2
-
-#include <asm/mach-common/bits/eppi.h>
-
-#include EASYLOGO_HEADER
-
-#define LCD_X_RES 480 /*Horizontal Resolution */
-#define LCD_Y_RES 272 /* Vertical Resolution */
-
-#define LCD_BPP 24 /* Bit Per Pixel */
-#define LCD_PIXEL_SIZE (LCD_BPP / 8)
-#define DMA_BUS_SIZE 32
-#define ACTIVE_VIDEO_MEM_OFFSET 0
-
-/* -- Horizontal synchronizing --
- *
- * Timing characteristics taken from the SHARP LQ043T1DG01 datasheet
- * (LCY-W-06602A Page 9 of 22)
- *
- * Clock Frequency 1/Tc Min 7.83 Typ 9.00 Max 9.26 MHz
- *
- * Period TH - 525 - Clock
- * Pulse width THp - 41 - Clock
- * Horizontal period THd - 480 - Clock
- * Back porch THb - 2 - Clock
- * Front porch THf - 2 - Clock
- *
- * -- Vertical synchronizing --
- * Period TV - 286 - Line
- * Pulse width TVp - 10 - Line
- * Vertical period TVd - 272 - Line
- * Back porch TVb - 2 - Line
- * Front porch TVf - 2 - Line
- */
-
-#define LCD_CLK (8*1000*1000) /* 8MHz */
-
-/* # active data to transfer after Horizontal Delay clock */
-#define EPPI_HCOUNT LCD_X_RES
-
-/* # active lines to transfer after Vertical Delay clock */
-#define EPPI_VCOUNT LCD_Y_RES
-
-/* Samples per Line = 480 (active data) + 45 (padding) */
-#define EPPI_LINE 525
-
-/* Lines per Frame = 272 (active data) + 14 (padding) */
-#define EPPI_FRAME 286
-
-/* FS1 (Hsync) Width (Typical)*/
-#define EPPI_FS1W_HBL 41
-
-/* FS1 (Hsync) Period (Typical) */
-#define EPPI_FS1P_AVPL EPPI_LINE
-
-/* Horizontal Delay clock after assertion of Hsync (Typical) */
-#define EPPI_HDELAY 43
-
-/* FS2 (Vsync) Width = FS1 (Hsync) Period * 10 */
-#define EPPI_FS2W_LVB (EPPI_LINE * 10)
-
- /* FS2 (Vsync) Period = FS1 (Hsync) Period * Lines per Frame */
-#define EPPI_FS2P_LAVF (EPPI_LINE * EPPI_FRAME)
-
-/* Vertical Delay after assertion of Vsync (2 Lines) */
-#define EPPI_VDELAY 12
-
-#define EPPI_CLIP 0xFF00FF00
-
-/* EPPI Control register configuration value for RGB out
- * - EPPI as Output
- * GP 2 frame sync mode,
- * Internal Clock generation disabled, Internal FS generation enabled,
- * Receives samples on EPPI_CLK raising edge, Transmits samples on EPPI_CLK falling edge,
- * FS1 & FS2 are active high,
- * DLEN = 6 (24 bits for RGB888 out) or 5 (18 bits for RGB666 out)
- * DMA Unpacking disabled when RGB Formating is enabled, otherwise DMA unpacking enabled
- * Swapping Enabled,
- * One (DMA) Channel Mode,
- * RGB Formatting Enabled for RGB666 output, disabled for RGB888 output
- * Regular watermark - when FIFO is 100% full,
- * Urgent watermark - when FIFO is 75% full
- */
-
-#define EPPI_CONTROL (0x20136E2E)
-
-static inline u16 get_eppi_clkdiv(u32 target_ppi_clk)
-{
- u32 sclk = get_sclk();
-
- /* EPPI_CLK = (SCLK) / (2 * (EPPI_CLKDIV[15:0] + 1)) */
-
- return (((sclk / target_ppi_clk) / 2) - 1);
-}
-
-void Init_PPI(void)
-{
- u16 eppi_clkdiv = get_eppi_clkdiv(LCD_CLK);
-
- bfin_write_EPPI0_FS1W_HBL(EPPI_FS1W_HBL);
- bfin_write_EPPI0_FS1P_AVPL(EPPI_FS1P_AVPL);
- bfin_write_EPPI0_FS2W_LVB(EPPI_FS2W_LVB);
- bfin_write_EPPI0_FS2P_LAVF(EPPI_FS2P_LAVF);
- bfin_write_EPPI0_CLIP(EPPI_CLIP);
-
- bfin_write_EPPI0_FRAME(EPPI_FRAME);
- bfin_write_EPPI0_LINE(EPPI_LINE);
-
- bfin_write_EPPI0_HCOUNT(EPPI_HCOUNT);
- bfin_write_EPPI0_HDELAY(EPPI_HDELAY);
- bfin_write_EPPI0_VCOUNT(EPPI_VCOUNT);
- bfin_write_EPPI0_VDELAY(EPPI_VDELAY);
-
- bfin_write_EPPI0_CLKDIV(eppi_clkdiv);
-
-/*
- * DLEN = 6 (24 bits for RGB888 out) or 5 (18 bits for RGB666 out)
- * RGB Formatting Enabled for RGB666 output, disabled for RGB888 output
- */
-#if defined(CONFIG_VIDEO_RGB666)
- bfin_write_EPPI0_CONTROL((EPPI_CONTROL & ~DLENGTH) | DLEN_18 |
- RGB_FMT_EN);
-#else
- bfin_write_EPPI0_CONTROL(((EPPI_CONTROL & ~DLENGTH) | DLEN_24) &
- ~RGB_FMT_EN);
-#endif
-
-}
-
-#define DEB2_URGENT 0x2000 /* DEB2 Urgent */
-
-void Init_DMA(void *dst)
-{
-
-#if defined(CONFIG_DEB_DMA_URGENT)
- bfin_write_EBIU_DDRQUE(bfin_read_EBIU_DDRQUE() | DEB2_URGENT);
-#endif
-
- bfin_write_DMA12_START_ADDR(dst);
-
- /* X count */
- bfin_write_DMA12_X_COUNT((LCD_X_RES * LCD_BPP) / DMA_BUS_SIZE);
- bfin_write_DMA12_X_MODIFY(DMA_BUS_SIZE / 8);
-
- /* Y count */
- bfin_write_DMA12_Y_COUNT(LCD_Y_RES);
- bfin_write_DMA12_Y_MODIFY(DMA_BUS_SIZE / 8);
-
- /* DMA Config */
- bfin_write_DMA12_CONFIG(
- WDSIZE_32 | /* 32 bit DMA */
- DMA2D | /* 2D DMA */
- FLOW_AUTO /* autobuffer mode */
- );
-}
-
-void Init_Ports(void)
-{
- const unsigned short pins[] = {
- P_PPI0_D0, P_PPI0_D1, P_PPI0_D2, P_PPI0_D3, P_PPI0_D4,
- P_PPI0_D5, P_PPI0_D6, P_PPI0_D7, P_PPI0_D8, P_PPI0_D9,
- P_PPI0_D10, P_PPI0_D11, P_PPI0_D12, P_PPI0_D13, P_PPI0_D14,
- P_PPI0_D15, P_PPI0_D16, P_PPI0_D17,
-#if !defined(CONFIG_VIDEO_RGB666)
- P_PPI0_D18, P_PPI0_D19, P_PPI0_D20, P_PPI0_D21, P_PPI0_D22,
- P_PPI0_D23,
-#endif
- P_PPI0_CLK, P_PPI0_FS1, P_PPI0_FS2, 0,
- };
- peripheral_request_list(pins, "lcd");
-
- gpio_request(GPIO_PE3, "lcd-disp");
- gpio_direction_output(GPIO_PE3, 1);
-}
-
-void EnableDMA(void)
-{
- bfin_write_DMA12_CONFIG(bfin_read_DMA12_CONFIG() | DMAEN);
-}
-
-void DisableDMA(void)
-{
- bfin_write_DMA12_CONFIG(bfin_read_DMA12_CONFIG() & ~DMAEN);
-}
-
-/* enable and disable PPI functions */
-void EnablePPI(void)
-{
- bfin_write_EPPI0_CONTROL(bfin_read_EPPI0_CONTROL() | EPPI_EN);
-}
-
-void DisablePPI(void)
-{
- bfin_write_EPPI0_CONTROL(bfin_read_EPPI0_CONTROL() & ~EPPI_EN);
-}
-
-int video_init(void *dst)
-{
- Init_Ports();
- Init_DMA(dst);
- EnableDMA();
- Init_PPI();
- EnablePPI();
-
- return 0;
-}
-
-void video_stop(void)
-{
- DisablePPI();
- DisableDMA();
-}
-
-static void dma_bitblit(void *dst, fastimage_t *logo, int x, int y)
-{
- if (dcache_status())
- blackfin_dcache_flush_range(logo->data, logo->data + logo->size);
-
- bfin_write_MDMA_D0_IRQ_STATUS(DMA_DONE | DMA_ERR);
-
- /* Setup destination start address */
- bfin_write_MDMA_D0_START_ADDR(dst + ((x & -2) * LCD_PIXEL_SIZE)
- + (y * LCD_X_RES * LCD_PIXEL_SIZE));
- /* Setup destination xcount */
- bfin_write_MDMA_D0_X_COUNT(logo->width * LCD_PIXEL_SIZE / DMA_SIZE16);
- /* Setup destination xmodify */
- bfin_write_MDMA_D0_X_MODIFY(DMA_SIZE16);
-
- /* Setup destination ycount */
- bfin_write_MDMA_D0_Y_COUNT(logo->height);
- /* Setup destination ymodify */
- bfin_write_MDMA_D0_Y_MODIFY((LCD_X_RES - logo->width) * LCD_PIXEL_SIZE + DMA_SIZE16);
-
-
- /* Setup Source start address */
- bfin_write_MDMA_S0_START_ADDR(logo->data);
- /* Setup Source xcount */
- bfin_write_MDMA_S0_X_COUNT(logo->width * LCD_PIXEL_SIZE / DMA_SIZE16);
- /* Setup Source xmodify */
- bfin_write_MDMA_S0_X_MODIFY(DMA_SIZE16);
-
- /* Setup Source ycount */
- bfin_write_MDMA_S0_Y_COUNT(logo->height);
- /* Setup Source ymodify */
- bfin_write_MDMA_S0_Y_MODIFY(DMA_SIZE16);
-
-
- /* Enable source DMA */
- bfin_write_MDMA_S0_CONFIG(DMAEN | WDSIZE_16 | DMA2D);
- SSYNC();
- bfin_write_MDMA_D0_CONFIG(WNR | DMAEN | WDSIZE_16 | DMA2D);
-
- while (bfin_read_MDMA_D0_IRQ_STATUS() & DMA_RUN);
-
- bfin_write_MDMA_S0_IRQ_STATUS(bfin_read_MDMA_S0_IRQ_STATUS() | DMA_DONE | DMA_ERR);
- bfin_write_MDMA_D0_IRQ_STATUS(bfin_read_MDMA_D0_IRQ_STATUS() | DMA_DONE | DMA_ERR);
-
-}
-
-int drv_video_init(void)
-{
- int error, devices = 1;
- struct stdio_dev videodev;
-
- u8 *dst;
- u32 fbmem_size = LCD_X_RES * LCD_Y_RES * LCD_PIXEL_SIZE + ACTIVE_VIDEO_MEM_OFFSET;
-
- dst = malloc(fbmem_size);
-
- if (dst == NULL) {
- printf("Failed to alloc FB memory\n");
- return -1;
- }
-
-#ifdef EASYLOGO_ENABLE_GZIP
- unsigned char *data = EASYLOGO_DECOMP_BUFFER;
- unsigned long src_len = EASYLOGO_ENABLE_GZIP;
- error = gunzip(data, bfin_logo.size, bfin_logo.data, &src_len);
- bfin_logo.data = data;
-#elif defined(EASYLOGO_ENABLE_LZMA)
- unsigned char *data = EASYLOGO_DECOMP_BUFFER;
- SizeT lzma_len = bfin_logo.size;
- error = lzmaBuffToBuffDecompress(data, &lzma_len,
- bfin_logo.data, EASYLOGO_ENABLE_LZMA);
- bfin_logo.data = data;
-#else
- error = 0;
-#endif
-
- if (error) {
- puts("Failed to decompress logo\n");
- free(dst);
- return -1;
- }
-
- memset(dst + ACTIVE_VIDEO_MEM_OFFSET, bfin_logo.data[0], fbmem_size - ACTIVE_VIDEO_MEM_OFFSET);
-
- dma_bitblit(dst + ACTIVE_VIDEO_MEM_OFFSET, &bfin_logo,
- (LCD_X_RES - bfin_logo.width) / 2,
- (LCD_Y_RES - bfin_logo.height) / 2);
-
- video_init(dst); /* Video initialization */
-
- memset(&videodev, 0, sizeof(videodev));
-
- strcpy(videodev.name, "video");
-
- error = stdio_register(&videodev);
-
- return (error == 0) ? devices : error;
-}
generated by cgit (git 2.34.1) at 2024-12-27 06:30:28 +0000