diff options
Diffstat (limited to 'board/congatec/cgtqmx6eval')
| -rw-r--r-- | board/congatec/cgtqmx6eval/README | 12 |
1 files changed, 6 insertions, 6 deletions
diff --git a/board/congatec/cgtqmx6eval/README b/board/congatec/cgtqmx6eval/README index f2c959949c..0777c781c2 100644 --- a/board/congatec/cgtqmx6eval/README +++ b/board/congatec/cgtqmx6eval/README @@ -3,10 +3,10 @@ U-Boot for the Congatec QMX6 boards This file contains information for the port of U-Boot to the Congatec QMX6 boards. -1. Building U-boot +1. Building U-Boot ------------------ -- Build U-boot for Congatec QMX6 boards: +- Build U-Boot for Congatec QMX6 boards: $ make mrproper $ make cgtqmx6eval_defconfig @@ -17,7 +17,7 @@ This will generate the following binaries: - SPL - u-boot.img -2. Flashing U-boot in the SPI NOR +2. Flashing U-Boot in the SPI NOR --------------------------------- Copy SPL and u-boot.img to the exported TFTP directory of the @@ -41,7 +41,7 @@ host PC (/tftpboot , for example). => sf write 0x12000000 0x10000 0x70000 -Reboot the board and the new U-boot should come up. +Reboot the board and the new U-Boot should come up. 3. Booting from the SD card --------------------------- @@ -64,9 +64,9 @@ command: => bmode esdhc4 -And then the U-boot from the big slot will boot. +And then the U-Boot from the big slot will boot. -Note: If the "bmode" command is not available from your pre-installed U-boot, +Note: If the "bmode" command is not available from your pre-installed U-Boot, these instruction will produce the same effect: => mw.l 0x20d8040 0x3850 |