diff options
Diffstat (limited to 'board/cpc45/plx9030.c')
| -rw-r--r-- | board/cpc45/plx9030.c | 156 |
1 files changed, 0 insertions, 156 deletions
diff --git a/board/cpc45/plx9030.c b/board/cpc45/plx9030.c deleted file mode 100644 index 06fb8d6c9a..0000000000 --- a/board/cpc45/plx9030.c +++ /dev/null @@ -1,156 +0,0 @@ -/* Plx9030.c - system configuration module for PLX9030 PCI to Local Bus Bridge */ -/* - * (C) Copyright 2002-2003 - * Josef Wagner, MicroSys GmbH, wagner@microsys.de. - * - * SPDX-License-Identifier: GPL-2.0+ - * Date Modification by - * ------- ---------------------------------------------- --- - * 30sep02 converted from VxWorks to LINUX wa -*/ - - -/* -DESCRIPTION - -This is the configuration module for the PLX9030 PCI to Local Bus Bridge. -It configures the Chip select lines for SRAM (CS0), ST16C552 (CS1,CS2), Display and local -registers (CS3) on CPC45. -*/ - -/* includes */ - -#include <common.h> -#include <malloc.h> -#include <net.h> -#include <asm/io.h> -#include <pci.h> - -/* imports */ - - -/* defines */ -#define PLX9030_VENDOR_ID 0x10B5 -#define PLX9030_DEVICE_ID 0x9030 - -#undef PLX_DEBUG - -/* PLX9030 register offsets */ -#define P9030_LAS0RR 0x00 -#define P9030_LAS1RR 0x04 -#define P9030_LAS2RR 0x08 -#define P9030_LAS3RR 0x0c -#define P9030_EROMRR 0x10 -#define P9030_LAS0BA 0x14 -#define P9030_LAS1BA 0x18 -#define P9030_LAS2BA 0x1c -#define P9030_LAS3BA 0x20 -#define P9030_EROMBA 0x24 -#define P9030_LAS0BRD 0x28 -#define P9030_LAS1BRD 0x2c -#define P9030_LAS2BRD 0x30 -#define P9030_LAS3BRD 0x34 -#define P9030_EROMBRD 0x38 -#define P9030_CS0BASE 0x3C -#define P9030_CS1BASE 0x40 -#define P9030_CS2BASE 0x44 -#define P9030_CS3BASE 0x48 -#define P9030_INTCSR 0x4c -#define P9030_CNTRL 0x50 -#define P9030_GPIOC 0x54 - -/* typedefs */ - - -/* locals */ - -static struct pci_device_id supported[] = { - { PLX9030_VENDOR_ID, PLX9030_DEVICE_ID }, - { } -}; - -/* forward declarations */ -void sysOutLong(ulong address, ulong value); - - -/*************************************************************************** -* -* Plx9030Init - init CS0..CS3 for CPC45 -* -* -* RETURNS: N/A -*/ - -void Plx9030Init (void) -{ - pci_dev_t devno; - ulong membaseCsr; /* base address of device memory space */ - int idx = 0; /* general index */ - - - /* find plx9030 device */ - - if ((devno = pci_find_devices(supported, idx++)) < 0) - { - printf("No PLX9030 device found !!\n"); - return; - } - - -#ifdef PLX_DEBUG - printf("PLX 9030 device found ! devno = 0x%x\n",devno); -#endif - - membaseCsr = PCI_PLX9030_MEMADDR; - - /* set base address */ - pci_write_config_dword(devno, PCI_BASE_ADDRESS_0, membaseCsr); - - /* enable mapped memory and IO addresses */ - pci_write_config_dword(devno, - PCI_COMMAND, - PCI_COMMAND_MEMORY | - PCI_COMMAND_MASTER); - - - /* configure GBIOC */ - sysOutLong((membaseCsr + P9030_GPIOC), 0x00000FC0); /* CS2/CS3 enable */ - - /* configure CS0 (SRAM) */ - sysOutLong((membaseCsr + P9030_LAS0BA), 0x00000001); /* enable space base */ - sysOutLong((membaseCsr + P9030_LAS0RR), 0x0FE00000); /* 2 MByte */ - sysOutLong((membaseCsr + P9030_LAS0BRD), 0x51928900); /* 4 wait states */ - sysOutLong((membaseCsr + P9030_CS0BASE), 0x00100001); /* enable 2 MByte */ - /* remap CS0 (SRAM) */ - pci_write_config_dword(devno, PCI_BASE_ADDRESS_2, SRAM_BASE); - - /* configure CS1 (ST16552 / CHAN A) */ - sysOutLong((membaseCsr + P9030_LAS1BA), 0x00400001); /* enable space base */ - sysOutLong((membaseCsr + P9030_LAS1RR), 0x0FFFFF00); /* 256 byte */ - sysOutLong((membaseCsr + P9030_LAS1BRD), 0x55122900); /* 4 wait states */ - sysOutLong((membaseCsr + P9030_CS1BASE), 0x00400081); /* enable 256 Byte */ - /* remap CS1 (ST16552 / CHAN A) */ - /* remap CS1 (ST16552 / CHAN A) */ - pci_write_config_dword(devno, PCI_BASE_ADDRESS_3, ST16552_A_BASE); - - /* configure CS2 (ST16552 / CHAN B) */ - sysOutLong((membaseCsr + P9030_LAS2BA), 0x00800001); /* enable space base */ - sysOutLong((membaseCsr + P9030_LAS2RR), 0x0FFFFF00); /* 256 byte */ - sysOutLong((membaseCsr + P9030_LAS2BRD), 0x55122900); /* 4 wait states */ - sysOutLong((membaseCsr + P9030_CS2BASE), 0x00800081); /* enable 256 Byte */ - /* remap CS2 (ST16552 / CHAN B) */ - pci_write_config_dword(devno, PCI_BASE_ADDRESS_4, ST16552_B_BASE); - - /* configure CS3 (BCSR) */ - sysOutLong((membaseCsr + P9030_LAS3BA), 0x00C00001); /* enable space base */ - sysOutLong((membaseCsr + P9030_LAS3RR), 0x0FFFFF00); /* 256 byte */ - sysOutLong((membaseCsr + P9030_LAS3BRD), 0x55357A80); /* 9 wait states */ - sysOutLong((membaseCsr + P9030_CS3BASE), 0x00C00081); /* enable 256 Byte */ - /* remap CS3 (DISPLAY and BCSR) */ - pci_write_config_dword(devno, PCI_BASE_ADDRESS_5, BCSR_BASE); -} - -void sysOutLong(ulong address, ulong value) -{ - *(ulong*)address = cpu_to_le32(value); -} |