diff options
Diffstat (limited to 'board/davinci/da8xxevm/README.omapl138-lcdk')
| -rw-r--r-- | board/davinci/da8xxevm/README.omapl138-lcdk | 28 |
1 files changed, 0 insertions, 28 deletions
diff --git a/board/davinci/da8xxevm/README.omapl138-lcdk b/board/davinci/da8xxevm/README.omapl138-lcdk deleted file mode 100644 index ea0c53d043..0000000000 --- a/board/davinci/da8xxevm/README.omapl138-lcdk +++ /dev/null @@ -1,28 +0,0 @@ -Summary -======= -This README assumes you have read README.da850. It contains some additional -information specific to building the omapl138-lcdk. The AIS file as generated -by the build is, currently, not useable due to differences in the flash -available on this board, as compared to the da850evm boards. - -Flash Differences -================= -Refer to the discussion in [1] for more detail - basically the da850evm uses -SPI flash whereas the lcdk uses NAND flash to store the bootloader, and -the support isn't there in the SPL code. - -It should be possible to add the support in the SPL code should someone be -sufficiently motivated. - -Using the built image -===================== -The output image to use is u-boot.bin. This needs to be converted to an -AIS file as described in [1] and then flashed using the utitilty linked to -there and also described in README.da850. You _may_ be able to write using -u-boot itself, but the commands in README.da850 won't work as they write to -SPI rather than NAND. - -Links -===== -[1] - http://e2e.ti.com/support/dsp/omap_applications_processors/f/42/t/386829
\ No newline at end of file |