diff options
Diffstat (limited to 'board/engicam/icorem6/README')
| -rw-r--r-- | board/engicam/icorem6/README | 30 |
1 files changed, 0 insertions, 30 deletions
diff --git a/board/engicam/icorem6/README b/board/engicam/icorem6/README deleted file mode 100644 index 3779e9665d..0000000000 --- a/board/engicam/icorem6/README +++ /dev/null @@ -1,30 +0,0 @@ -How to use U-Boot on Engicam i.CoreM6 Solo/DualLite and Quad/Dual Starter Kit: ------------------------------------------------------------------------------ - -$ make mrproper - -- Configure U-Boot for Engicam i.CoreM6 Quad/Dual/Solo/DualLite: -$ make imx6qdl_icore_mmc_defconfig - -- Build U-Boot -$ make - -This will generate the SPL image called SPL and the u-boot-dtb.img. - -- Flash the SPL image into the micro SD card: - -sudo dd if=SPL of=/dev/mmcblk0 bs=1k seek=1; sync - -- Flash the u-boot-dtb.img image into the micro SD card: - -sudo dd if=u-boot-dtb.img of=/dev/mmcblk0 bs=1k seek=69; sync - -- Jumper settings: - -MMC Boot: JM3 Closed - -- Connect the Serial cable between the Starter Kit and the PC for the console. -(J28 is the Linux Serial console connector) - -- Insert the micro SD card in the board, power it up and U-Boot messages should -come up. |