diff options
Diffstat (limited to 'board/esd/cpci750/mpsc.h')
| -rw-r--r-- | board/esd/cpci750/mpsc.h | 140 |
1 files changed, 0 insertions, 140 deletions
diff --git a/board/esd/cpci750/mpsc.h b/board/esd/cpci750/mpsc.h deleted file mode 100644 index 241f28a31a..0000000000 --- a/board/esd/cpci750/mpsc.h +++ /dev/null @@ -1,140 +0,0 @@ -/* - * (C) Copyright 2001 - * John Clemens <clemens@mclx.com>, Mission Critical Linux, Inc. - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -/************************************************************************* - * changes for Marvell DB64360 eval board 2003 by Ingo Assmus <ingo.assmus@keymile.com> - * - ************************************************************************/ - - -/* - * mpsc.h - header file for MPSC in uart mode (console driver) - */ - -#ifndef __MPSC_H__ -#define __MPSC_H__ - -/* include actual Galileo defines */ -#include "../../Marvell/include/mv_gen_reg.h" - -/* driver related defines */ - -int mpsc_init(int baud); -void mpsc_sdma_init(void); -void mpsc_init2(void); -int galbrg_set_baudrate(int channel, int rate); - -int mpsc_putchar_early(char ch); -char mpsc_getchar_debug(void); -int mpsc_test_char_debug(void); - -int mpsc_test_char_sdma(void); - -extern int (*mpsc_putchar)(char ch); -extern char (*mpsc_getchar)(void); -extern int (*mpsc_test_char)(void); - -#define CHANNEL CONFIG_MPSC_PORT - -#define TX_DESC 5 -#define RX_DESC 20 - -#define DESC_FIRST 0x00010000 -#define DESC_LAST 0x00020000 -#define DESC_OWNER_BIT 0x80000000 - -#define TX_DEMAND 0x00800000 -#define TX_STOP 0x00010000 -#define RX_ENABLE 0x00000080 - -#define SDMA_RX_ABORT (1 << 15) -#define SDMA_TX_ABORT (1 << 31) -#define MPSC_TX_ABORT (1 << 7) -#define MPSC_RX_ABORT (1 << 23) -#define MPSC_ENTER_HUNT (1 << 31) - -/* MPSC defines */ - -#define GALMPSC_CONNECT 0x1 -#define GALMPSC_DISCONNECT 0x0 - -#define GALMPSC_UART 0x1 - -#define GALMPSC_STOP_BITS_1 0x0 -#define GALMPSC_STOP_BITS_2 0x1 -#define GALMPSC_CHAR_LENGTH_8 0x3 -#define GALMPSC_CHAR_LENGTH_7 0x2 - -#define GALMPSC_PARITY_ODD 0x0 -#define GALMPSC_PARITY_EVEN 0x2 -#define GALMPSC_PARITY_MARK 0x3 -#define GALMPSC_PARITY_SPACE 0x1 -#define GALMPSC_PARITY_NONE -1 - -#define GALMPSC_SERIAL_MULTIPLEX SERIAL_PORT_MULTIPLEX /* 0xf010 */ -#define GALMPSC_ROUTING_REGISTER MAIN_ROUTING_REGISTER /* 0xb400 */ -#define GALMPSC_RxC_ROUTE RECEIVE_CLOCK_ROUTING_REGISTER /* 0xb404 */ -#define GALMPSC_TxC_ROUTE TRANSMIT_CLOCK_ROUTING_REGISTER /* 0xb408 */ -#define GALMPSC_MCONF_LOW MPSC0_MAIN_CONFIGURATION_LOW /* 0x8000 */ -#define GALMPSC_MCONF_HIGH MPSC0_MAIN_CONFIGURATION_HIGH /* 0x8004 */ -#define GALMPSC_PROTOCONF_REG MPSC0_PROTOCOL_CONFIGURATION /* 0x8008 */ - -#define GALMPSC_REG_GAP 0x1000 - -#define GALMPSC_MCONF_CHREG_BASE CHANNEL0_REGISTER1 /* 0x800c */ -#define GALMPSC_CHANNELREG_1 CHANNEL0_REGISTER1 /* 0x800c */ -#define GALMPSC_CHANNELREG_2 CHANNEL0_REGISTER2 /* 0x8010 */ -#define GALMPSC_CHANNELREG_3 CHANNEL0_REGISTER3 /* 0x8014 */ -#define GALMPSC_CHANNELREG_4 CHANNEL0_REGISTER4 /* 0x8018 */ -#define GALMPSC_CHANNELREG_5 CHANNEL0_REGISTER5 /* 0x801c */ -#define GALMPSC_CHANNELREG_6 CHANNEL0_REGISTER6 /* 0x8020 */ -#define GALMPSC_CHANNELREG_7 CHANNEL0_REGISTER7 /* 0x8024 */ -#define GALMPSC_CHANNELREG_8 CHANNEL0_REGISTER8 /* 0x8028 */ -#define GALMPSC_CHANNELREG_9 CHANNEL0_REGISTER9 /* 0x802c */ -#define GALMPSC_CHANNELREG_10 CHANNEL0_REGISTER10 /* 0x8030 */ -#define GALMPSC_CHANNELREG_11 CHANNEL0_REGISTER11 /* 0x8034 */ - -#define GALSDMA_COMMAND_FIRST (1 << 16) -#define GALSDMA_COMMAND_LAST (1 << 17) -#define GALSDMA_COMMAND_ENABLEINT (1 << 23) -#define GALSDMA_COMMAND_AUTO (1 << 30) -#define GALSDMA_COMMAND_OWNER (1 << 31) - -#define GALSDMA_RX 0 -#define GALSDMA_TX 1 - -/* CHANNEL2 should be CHANNEL1, according to documentation, - * but to work with the current GTREGS file... - */ -#define GALSDMA_0_CONF_REG CHANNEL0_CONFIGURATION_REGISTER /* 0x4000 */ -#define GALSDMA_1_CONF_REG CHANNEL2_CONFIGURATION_REGISTER /* 0x6000 */ -#define GALSDMA_0_COM_REG CHANNEL0_COMMAND_REGISTER /* 0x4008 */ -#define GALSDMA_1_COM_REG CHANNEL2_COMMAND_REGISTER /* 0x6008 */ -#define GALSDMA_0_CUR_RX_PTR CHANNEL0_CURRENT_RX_DESCRIPTOR_POINTER /* 0x4810 */ -#define GALSDMA_0_CUR_TX_PTR CHANNEL0_CURRENT_TX_DESCRIPTOR_POINTER /* 0x4c10 */ -#define GALSDMA_0_FIR_TX_PTR CHANNEL0_FIRST_TX_DESCRIPTOR_POINTER /* 0x4c14 */ -#define GALSDMA_1_CUR_RX_PTR CHANNEL2_CURRENT_RX_DESCRIPTOR_POINTER /* 0x6810 */ -#define GALSDMA_1_CUR_TX_PTR CHANNEL2_CURRENT_TX_DESCRIPTOR_POINTER /* 0x6c10 */ -#define GALSDMA_1_FIR_TX_PTR CHANNEL2_FIRST_TX_DESCRIPTOR_POINTER /* 0x6c14 */ -#define GALSDMA_REG_DIFF 0x2000 - -/* WRONG in gt64260R.h */ -#define GALSDMA_INT_CAUSE 0xb800 /* SDMA_CAUSE */ -#define GALSDMA_INT_MASK 0xb880 /* SDMA_MASK */ -#define GALMPSC_0_INT_CAUSE 0xb804 -#define GALMPSC_0_INT_MASK 0xb884 - -#define GALSDMA_MODE_UART 0 -#define GALSDMA_MODE_BISYNC 1 -#define GALSDMA_MODE_HDLC 2 -#define GALSDMA_MODE_TRANSPARENT 3 - -#define GALBRG_0_CONFREG BRG0_CONFIGURATION_REGISTER /* 0xb200 */ -#define GALBRG_REG_GAP 0x0008 -#define GALBRG_0_BTREG BRG0_BAUDE_TUNING_REGISTER /* 0xb204 */ - -#endif /* __MPSC_H__ */ |