summaryrefslogtreecommitdiff
path: root/board/esd/hh405/hh405.c
diff options
context:
space:
mode:
Diffstat (limited to 'board/esd/hh405/hh405.c')
-rw-r--r--board/esd/hh405/hh405.c86
1 files changed, 43 insertions, 43 deletions
diff --git a/board/esd/hh405/hh405.c b/board/esd/hh405/hh405.c
index 9fc41c879c..efadf16460 100644
--- a/board/esd/hh405/hh405.c
+++ b/board/esd/hh405/hh405.c
@@ -345,7 +345,7 @@ int board_early_init_f (void)
mtdcr(uicsr, 0xFFFFFFFF); /* clear all ints */
mtdcr(uicer, 0x00000000); /* disable all ints */
mtdcr(uiccr, 0x00000000); /* set all to be non-critical*/
- mtdcr(uicpr, CFG_UIC0_POLARITY);/* set int polarities */
+ mtdcr(uicpr, CONFIG_SYS_UIC0_POLARITY);/* set int polarities */
mtdcr(uictr, 0x10000000); /* set int trigger levels */
mtdcr(uicvcr, 0x00000001); /* set vect base=0,INT0 highest priority*/
mtdcr(uicsr, 0xFFFFFFFF); /* clear all ints */
@@ -363,26 +363,26 @@ int cf_enable(void)
int i;
volatile unsigned short *fpga_ctrl =
- (unsigned short *)((ulong)CFG_FPGA_BASE_ADDR + CFG_FPGA_CTRL);
+ (unsigned short *)((ulong)CONFIG_SYS_FPGA_BASE_ADDR + CONFIG_SYS_FPGA_CTRL);
volatile unsigned short *fpga_status =
- (unsigned short *)((ulong)CFG_FPGA_BASE_ADDR + CFG_FPGA_CTRL + 2);
+ (unsigned short *)((ulong)CONFIG_SYS_FPGA_BASE_ADDR + CONFIG_SYS_FPGA_CTRL + 2);
if (gd->board_type >= 2) {
- if (*fpga_status & CFG_FPGA_STATUS_CF_DETECT) {
- if (!(*fpga_ctrl & CFG_FPGA_CTRL_CF_BUS_EN)) {
- *fpga_ctrl &= ~CFG_FPGA_CTRL_CF_PWRN;
+ if (*fpga_status & CONFIG_SYS_FPGA_STATUS_CF_DETECT) {
+ if (!(*fpga_ctrl & CONFIG_SYS_FPGA_CTRL_CF_BUS_EN)) {
+ *fpga_ctrl &= ~CONFIG_SYS_FPGA_CTRL_CF_PWRN;
for (i=0; i<300; i++)
udelay(1000);
- *fpga_ctrl |= CFG_FPGA_CTRL_CF_BUS_EN;
+ *fpga_ctrl |= CONFIG_SYS_FPGA_CTRL_CF_BUS_EN;
for (i=0; i<20; i++)
udelay(1000);
}
} else {
- *fpga_ctrl &= ~CFG_FPGA_CTRL_CF_BUS_EN;
- *fpga_ctrl |= CFG_FPGA_CTRL_CF_PWRN;
+ *fpga_ctrl &= ~CONFIG_SYS_FPGA_CTRL_CF_BUS_EN;
+ *fpga_ctrl |= CONFIG_SYS_FPGA_CTRL_CF_PWRN;
}
}
@@ -392,11 +392,11 @@ int cf_enable(void)
int misc_init_r (void)
{
volatile unsigned short *fpga_ctrl =
- (unsigned short *)((ulong)CFG_FPGA_BASE_ADDR + CFG_FPGA_CTRL);
+ (unsigned short *)((ulong)CONFIG_SYS_FPGA_BASE_ADDR + CONFIG_SYS_FPGA_CTRL);
volatile unsigned short *lcd_contrast =
- (unsigned short *)((ulong)CFG_FPGA_BASE_ADDR + CFG_FPGA_CTRL + 4);
+ (unsigned short *)((ulong)CONFIG_SYS_FPGA_BASE_ADDR + CONFIG_SYS_FPGA_CTRL + 4);
volatile unsigned short *lcd_backlight =
- (unsigned short *)((ulong)CFG_FPGA_BASE_ADDR + CFG_FPGA_CTRL + 6);
+ (unsigned short *)((ulong)CONFIG_SYS_FPGA_BASE_ADDR + CONFIG_SYS_FPGA_CTRL + 6);
unsigned char *dst;
ulong len = sizeof(fpgadata);
int status;
@@ -405,8 +405,8 @@ int misc_init_r (void)
char *str;
unsigned long contrast0 = 0xffffffff;
- dst = malloc(CFG_FPGA_MAX_SIZE);
- if (gunzip (dst, CFG_FPGA_MAX_SIZE, (uchar *)fpgadata, &len) != 0) {
+ dst = malloc(CONFIG_SYS_FPGA_MAX_SIZE);
+ if (gunzip (dst, CONFIG_SYS_FPGA_MAX_SIZE, (uchar *)fpgadata, &len) != 0) {
printf ("GUNZIP ERROR - must RESET board to recover\n");
do_reset (NULL, 0, 0, NULL);
}
@@ -474,22 +474,22 @@ int misc_init_r (void)
/*
* Setup and enable EEPROM write protection
*/
- out32(GPIO0_OR, in32(GPIO0_OR) | CFG_EEPROM_WP);
+ out32(GPIO0_OR, in32(GPIO0_OR) | CONFIG_SYS_EEPROM_WP);
/*
* Reset touch-screen controller
*/
- out32(GPIO0_OR, in32(GPIO0_OR) & ~CFG_TOUCH_RST);
+ out32(GPIO0_OR, in32(GPIO0_OR) & ~CONFIG_SYS_TOUCH_RST);
udelay(1000);
- out32(GPIO0_OR, in32(GPIO0_OR) | CFG_TOUCH_RST);
+ out32(GPIO0_OR, in32(GPIO0_OR) | CONFIG_SYS_TOUCH_RST);
/*
* Enable power on PS/2 interface (with reset)
*/
- *fpga_ctrl &= ~(CFG_FPGA_CTRL_PS2_PWR);
+ *fpga_ctrl &= ~(CONFIG_SYS_FPGA_CTRL_PS2_PWR);
for (i=0;i<500;i++)
udelay(1000);
- *fpga_ctrl |= (CFG_FPGA_CTRL_PS2_PWR);
+ *fpga_ctrl |= (CONFIG_SYS_FPGA_CTRL_PS2_PWR);
/*
* Get contrast value from environment variable
@@ -512,11 +512,11 @@ int misc_init_r (void)
/*
* Switch backlight on
*/
- *fpga_ctrl |= CFG_FPGA_CTRL_VGA0_BL;
+ *fpga_ctrl |= CONFIG_SYS_FPGA_CTRL_VGA0_BL;
*lcd_backlight = 0x0000;
lcd_setup(1, 0);
- lcd_init((uchar *)CFG_LCD_BIG_REG, (uchar *)CFG_LCD_BIG_MEM,
+ lcd_init((uchar *)CONFIG_SYS_LCD_BIG_REG, (uchar *)CONFIG_SYS_LCD_BIG_MEM,
regs_13806_1024_768_8bpp,
sizeof(regs_13806_1024_768_8bpp)/sizeof(regs_13806_1024_768_8bpp[0]),
logo_bmp_1024, sizeof(logo_bmp_1024));
@@ -524,11 +524,11 @@ int misc_init_r (void)
/*
* Switch backlight on
*/
- *fpga_ctrl &= ~CFG_FPGA_CTRL_VGA0_BL;
+ *fpga_ctrl &= ~CONFIG_SYS_FPGA_CTRL_VGA0_BL;
*lcd_backlight = 0x0000;
lcd_setup(1, 0);
- lcd_init((uchar *)CFG_LCD_BIG_REG, (uchar *)CFG_LCD_BIG_MEM,
+ lcd_init((uchar *)CONFIG_SYS_LCD_BIG_REG, (uchar *)CONFIG_SYS_LCD_BIG_MEM,
regs_13806_640_480_16bpp,
sizeof(regs_13806_640_480_16bpp)/sizeof(regs_13806_640_480_16bpp[0]),
logo_bmp_640, sizeof(logo_bmp_640));
@@ -545,7 +545,7 @@ int misc_init_r (void)
/*
* Switch backlight on
*/
- *fpga_ctrl |= CFG_FPGA_CTRL_VGA0_BL | CFG_FPGA_CTRL_VGA0_BL_MODE;
+ *fpga_ctrl |= CONFIG_SYS_FPGA_CTRL_VGA0_BL | CONFIG_SYS_FPGA_CTRL_VGA0_BL_MODE;
/*
* Set lcd clock (small epson)
*/
@@ -553,7 +553,7 @@ int misc_init_r (void)
udelay(100); /* wait for 100 us */
lcd_setup(0, 1);
- lcd_init((uchar *)CFG_LCD_SMALL_REG, (uchar *)CFG_LCD_SMALL_MEM,
+ lcd_init((uchar *)CONFIG_SYS_LCD_SMALL_REG, (uchar *)CONFIG_SYS_LCD_SMALL_MEM,
regs_13705_320_240_8bpp,
sizeof(regs_13705_320_240_8bpp)/sizeof(regs_13705_320_240_8bpp[0]),
logo_bmp_320_8bpp, sizeof(logo_bmp_320_8bpp));
@@ -570,14 +570,14 @@ int misc_init_r (void)
/*
* Switch backlight on
*/
- *fpga_ctrl |= CFG_FPGA_CTRL_VGA0_BL | CFG_FPGA_CTRL_VGA0_BL_MODE;
+ *fpga_ctrl |= CONFIG_SYS_FPGA_CTRL_VGA0_BL | CONFIG_SYS_FPGA_CTRL_VGA0_BL_MODE;
/*
* Set lcd clock (small epson), enable 1-wire interface
*/
- *fpga_ctrl |= LCD_CLK_08330 | CFG_FPGA_CTRL_OW_ENABLE;
+ *fpga_ctrl |= LCD_CLK_08330 | CONFIG_SYS_FPGA_CTRL_OW_ENABLE;
lcd_setup(0, 1);
- lcd_init((uchar *)CFG_LCD_SMALL_REG, (uchar *)CFG_LCD_SMALL_MEM,
+ lcd_init((uchar *)CONFIG_SYS_LCD_SMALL_REG, (uchar *)CONFIG_SYS_LCD_SMALL_MEM,
regs_13704_320_240_4bpp,
sizeof(regs_13704_320_240_4bpp)/sizeof(regs_13704_320_240_4bpp[0]),
logo_bmp_320, sizeof(logo_bmp_320));
@@ -647,27 +647,27 @@ int checkboard (void)
void ide_set_reset(int on)
{
volatile unsigned short *fpga_mode =
- (unsigned short *)((ulong)CFG_FPGA_BASE_ADDR + CFG_FPGA_CTRL);
+ (unsigned short *)((ulong)CONFIG_SYS_FPGA_BASE_ADDR + CONFIG_SYS_FPGA_CTRL);
volatile unsigned short *fpga_status =
- (unsigned short *)((ulong)CFG_FPGA_BASE_ADDR + CFG_FPGA_CTRL + 2);
+ (unsigned short *)((ulong)CONFIG_SYS_FPGA_BASE_ADDR + CONFIG_SYS_FPGA_CTRL + 2);
- if (((gd->board_type >= 2) && (*fpga_status & CFG_FPGA_STATUS_CF_DETECT)) ||
+ if (((gd->board_type >= 2) && (*fpga_status & CONFIG_SYS_FPGA_STATUS_CF_DETECT)) ||
(gd->board_type < 2)) {
/*
* Assert or deassert CompactFlash Reset Pin
*/
if (on) { /* assert RESET */
cf_enable();
- *fpga_mode &= ~(CFG_FPGA_CTRL_CF_RESET);
+ *fpga_mode &= ~(CONFIG_SYS_FPGA_CTRL_CF_RESET);
} else { /* release RESET */
- *fpga_mode |= CFG_FPGA_CTRL_CF_RESET;
+ *fpga_mode |= CONFIG_SYS_FPGA_CTRL_CF_RESET;
}
}
}
#endif /* CONFIG_IDE_RESET */
-#if defined(CFG_EEPROM_WREN)
+#if defined(CONFIG_SYS_EEPROM_WREN)
/* Input: <dev_addr> I2C address of EEPROM device to enable.
* <state> -1: deliver current state
* 0: disable write
@@ -678,23 +678,23 @@ void ide_set_reset(int on)
*/
int eeprom_write_enable (unsigned dev_addr, int state)
{
- if (CFG_I2C_EEPROM_ADDR != dev_addr) {
+ if (CONFIG_SYS_I2C_EEPROM_ADDR != dev_addr) {
return -1;
} else {
switch (state) {
case 1:
/* Enable write access, clear bit GPIO_SINT2. */
- out32(GPIO0_OR, in32(GPIO0_OR) & ~CFG_EEPROM_WP);
+ out32(GPIO0_OR, in32(GPIO0_OR) & ~CONFIG_SYS_EEPROM_WP);
state = 0;
break;
case 0:
/* Disable write access, set bit GPIO_SINT2. */
- out32(GPIO0_OR, in32(GPIO0_OR) | CFG_EEPROM_WP);
+ out32(GPIO0_OR, in32(GPIO0_OR) | CONFIG_SYS_EEPROM_WP);
state = 0;
break;
default:
/* Read current status back. */
- state = (0 == (in32(GPIO0_OR) & CFG_EEPROM_WP));
+ state = (0 == (in32(GPIO0_OR) & CONFIG_SYS_EEPROM_WP));
break;
}
}
@@ -708,21 +708,21 @@ int do_eep_wren (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
if (query) {
/* Query write access state. */
- state = eeprom_write_enable (CFG_I2C_EEPROM_ADDR, -1);
+ state = eeprom_write_enable (CONFIG_SYS_I2C_EEPROM_ADDR, -1);
if (state < 0) {
puts ("Query of write access state failed.\n");
} else {
printf ("Write access for device 0x%0x is %sabled.\n",
- CFG_I2C_EEPROM_ADDR, state ? "en" : "dis");
+ CONFIG_SYS_I2C_EEPROM_ADDR, state ? "en" : "dis");
state = 0;
}
} else {
if ('0' == argv[1][0]) {
/* Disable write access. */
- state = eeprom_write_enable (CFG_I2C_EEPROM_ADDR, 0);
+ state = eeprom_write_enable (CONFIG_SYS_I2C_EEPROM_ADDR, 0);
} else {
/* Enable write access. */
- state = eeprom_write_enable (CFG_I2C_EEPROM_ADDR, 1);
+ state = eeprom_write_enable (CONFIG_SYS_I2C_EEPROM_ADDR, 1);
}
if (state < 0) {
puts ("Setup of write access state failed.\n");
@@ -735,7 +735,7 @@ int do_eep_wren (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
U_BOOT_CMD(eepwren, 2, 0, do_eep_wren,
"eepwren - Enable / disable / query EEPROM write access\n",
NULL);
-#endif /* #if defined(CFG_EEPROM_WREN) */
+#endif /* #if defined(CONFIG_SYS_EEPROM_WREN) */
#ifdef CONFIG_VIDEO_SM501
generated by cgit (git 2.34.1) at 2024-12-29 17:01:21 +0000