diff options
Diffstat (limited to 'board/esd/plu405/plu405.c')
-rw-r--r-- | board/esd/plu405/plu405.c | 118 |
1 files changed, 62 insertions, 56 deletions
diff --git a/board/esd/plu405/plu405.c b/board/esd/plu405/plu405.c index fdacbf6f6b..e41545a936 100644 --- a/board/esd/plu405/plu405.c +++ b/board/esd/plu405/plu405.c @@ -27,10 +27,7 @@ #include <command.h> #include <malloc.h> - -#if 0 -#define FPGA_DEBUG -#endif +#undef FPGA_DEBUG DECLARE_GLOBAL_DATA_PTR; @@ -48,7 +45,6 @@ const unsigned char fpgadata[] = */ #include "../common/fpga.c" - /* * include common auto-update code (for esd boards) */ @@ -68,7 +64,7 @@ int N_AU_IMAGES = (sizeof(au_image) / sizeof(au_image[0])); /* Prototypes */ int gunzip(void *, int, unsigned char *, unsigned long *); -int board_early_init_f (void) +int board_early_init_f(void) { /* * IRQ 0-15 405GP internally generated; active high; level sensitive @@ -94,15 +90,13 @@ int board_early_init_f (void) * EBC Configuration Register: set ready timeout to * 512 ebc-clks -> ca. 15 us */ - mtebc (epcr, 0xa8400000); /* ebc always driven */ + mtebc(epcr, 0xa8400000); /* ebc always driven */ return 0; } -int misc_init_r (void) +int misc_init_r(void) { - unsigned char *duart0_mcr = (unsigned char *)((ulong)DUART0_BA + 4); - unsigned char *duart1_mcr = (unsigned char *)((ulong)DUART1_BA + 4); unsigned char *dst; unsigned char fctr; ulong len = sizeof(fpgadata); @@ -115,9 +109,10 @@ int misc_init_r (void) gd->bd->bi_flashoffset = 0; dst = malloc(CONFIG_SYS_FPGA_MAX_SIZE); - if (gunzip (dst, CONFIG_SYS_FPGA_MAX_SIZE, (uchar *)fpgadata, &len) != 0) { - printf ("GUNZIP ERROR - must RESET board to recover\n"); - do_reset (NULL, 0, 0, NULL); + if (gunzip(dst, CONFIG_SYS_FPGA_MAX_SIZE, + (uchar *)fpgadata, &len) != 0) { + printf("GUNZIP ERROR - must RESET board to recover\n"); + do_reset(NULL, 0, 0, NULL); } status = fpga_boot(dst, len); @@ -152,7 +147,7 @@ int misc_init_r (void) for (index=0;index<1000;index++) udelay(1000); } - putc ('\n'); + putc('\n'); do_reset(NULL, 0, 0, NULL); } @@ -165,7 +160,7 @@ int misc_init_r (void) printf("%s ", &(dst[index+1])); index += len+3; } - putc ('\n'); + putc('\n'); free(dst); @@ -180,29 +175,35 @@ int misc_init_r (void) /* * Reset external DUARTs */ - out_be32((void*)GPIO0_OR, in_be32((void*)GPIO0_OR) | CONFIG_SYS_DUART_RST); + out_be32((void*)GPIO0_OR, + in_be32((void*)GPIO0_OR) | CONFIG_SYS_DUART_RST); udelay(10); - out_be32((void*)GPIO0_OR, in_be32((void*)GPIO0_OR) & ~CONFIG_SYS_DUART_RST); + out_be32((void*)GPIO0_OR, + in_be32((void*)GPIO0_OR) & ~CONFIG_SYS_DUART_RST); udelay(1000); /* * Set NAND-FLASH GPIO signals to default */ out_be32((void*)GPIO0_OR, - in_be32((void*)GPIO0_OR) & ~(CONFIG_SYS_NAND_CLE | CONFIG_SYS_NAND_ALE)); - out_be32((void*)GPIO0_OR, in_be32((void*)GPIO0_OR) | CONFIG_SYS_NAND_CE); + in_be32((void*)GPIO0_OR) & + ~(CONFIG_SYS_NAND_CLE | CONFIG_SYS_NAND_ALE)); + out_be32((void*)GPIO0_OR, + in_be32((void*)GPIO0_OR) | CONFIG_SYS_NAND_CE); /* * Setup EEPROM write protection */ - out_be32((void*)GPIO0_OR, in_be32((void*)GPIO0_OR) | CONFIG_SYS_EEPROM_WP); - out_be32((void*)GPIO0_TCR, in_be32((void*)GPIO0_TCR) | CONFIG_SYS_EEPROM_WP); + out_be32((void*)GPIO0_OR, + in_be32((void*)GPIO0_OR) | CONFIG_SYS_EEPROM_WP); + out_be32((void*)GPIO0_TCR, + in_be32((void*)GPIO0_TCR) | CONFIG_SYS_EEPROM_WP); /* * Enable interrupts in exar duart mcr[3] */ - out_8(duart0_mcr, 0x08); - out_8(duart1_mcr, 0x08); + out_8((void *)DUART0_BA + 4, 0x08); + out_8((void *)DUART1_BA + 4, 0x08); /* * Enable auto RS485 mode in 2nd external uart @@ -213,26 +214,25 @@ int misc_init_r (void) out_8((void *)DUART1_BA + 1, fctr); /* write FCTR */ out_8((void *)DUART1_BA + 3, 0); /* write LCR */ - return (0); + return 0; } /* * Check Board Identity: */ -int checkboard (void) +int checkboard(void) { char str[64]; - int i = getenv_r ("serial#", str, sizeof(str)); + int i = getenv_r("serial#", str, sizeof(str)); - puts ("Board: "); + puts("Board: "); - if (i == -1) { - puts ("### No HW ID - assuming PLU405"); - } else { + if (i == -1) + puts("### No HW ID - assuming PLU405"); + else puts(str); - } - putc ('\n'); + putc('\n'); return 0; } @@ -245,10 +245,12 @@ void ide_set_reset(int on) */ if (on) { /* assert RESET */ out_be16((void *)FPGA_CTRL, - in_be16((void *)FPGA_CTRL) & ~CONFIG_SYS_FPGA_CTRL_CF_RESET); + in_be16((void *)FPGA_CTRL) & + ~CONFIG_SYS_FPGA_CTRL_CF_RESET); } else { /* release RESET */ out_be16((void *)FPGA_CTRL, - in_be16((void *)FPGA_CTRL) | CONFIG_SYS_FPGA_CTRL_CF_RESET); + in_be16((void *)FPGA_CTRL) | + CONFIG_SYS_FPGA_CTRL_CF_RESET); } } #endif /* CONFIG_IDE_RESET */ @@ -266,14 +268,14 @@ void reset_phy(void) #if defined(CONFIG_SYS_EEPROM_WREN) /* Input: <dev_addr> I2C address of EEPROM device to enable. - * <state> -1: deliver current state - * 0: disable write - * 1: enable write - * Returns: -1: wrong device address - * 0: dis-/en- able done - * 0/1: current state if <state> was -1. + * <state> -1: deliver current state + * 0: disable write + * 1: enable write + * Returns: -1: wrong device address + * 0: dis-/en- able done + * 0/1: current state if <state> was -1. */ -int eeprom_write_enable (unsigned dev_addr, int state) +int eeprom_write_enable(unsigned dev_addr, int state) { if (CONFIG_SYS_I2C_EEPROM_ADDR != dev_addr) { return -1; @@ -282,51 +284,55 @@ int eeprom_write_enable (unsigned dev_addr, int state) case 1: /* Enable write access, clear bit GPIO0. */ out_be32((void*)GPIO0_OR, - in_be32((void*)GPIO0_OR) & ~CONFIG_SYS_EEPROM_WP); + in_be32((void*)GPIO0_OR) & + ~CONFIG_SYS_EEPROM_WP); state = 0; break; case 0: /* Disable write access, set bit GPIO0. */ out_be32((void*)GPIO0_OR, - in_be32((void*)GPIO0_OR) | CONFIG_SYS_EEPROM_WP); + in_be32((void*)GPIO0_OR) | + CONFIG_SYS_EEPROM_WP); state = 0; break; default: /* Read current status back. */ - state = (0 == (in_be32((void*)GPIO0_OR) & - CONFIG_SYS_EEPROM_WP)); + state = ((in_be32((void*)GPIO0_OR) & + CONFIG_SYS_EEPROM_WP) == 0); break; } } return state; } -int do_eep_wren (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) +int do_eep_wren(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) { int query = argc == 1; int state = 0; if (query) { /* Query write access state. */ - state = eeprom_write_enable (CONFIG_SYS_I2C_EEPROM_ADDR, -1); + state = eeprom_write_enable(CONFIG_SYS_I2C_EEPROM_ADDR, -1); if (state < 0) { - puts ("Query of write access state failed.\n"); + puts("Query of write access state failed.\n"); } else { - printf ("Write access for device 0x%0x is %sabled.\n", - CONFIG_SYS_I2C_EEPROM_ADDR, state ? "en" : "dis"); + printf("Write access for device 0x%0x is %sabled.\n", + CONFIG_SYS_I2C_EEPROM_ADDR, + state ? "en" : "dis"); state = 0; } } else { - if ('0' == argv[1][0]) { + if (argv[1][0] == '0') { /* Disable write access. */ - state = eeprom_write_enable (CONFIG_SYS_I2C_EEPROM_ADDR, 0); + state = eeprom_write_enable(CONFIG_SYS_I2C_EEPROM_ADDR, + 0); } else { /* Enable write access. */ - state = eeprom_write_enable (CONFIG_SYS_I2C_EEPROM_ADDR, 1); - } - if (state < 0) { - puts ("Setup of write access state failed.\n"); + state = eeprom_write_enable(CONFIG_SYS_I2C_EEPROM_ADDR, + 1); } + if (state < 0) + puts("Setup of write access state failed.\n"); } return state; |