1 files changed, 0 insertions, 268 deletions
diff --git a/board/exmeritus/hww1u1a/hww1u1a.c b/board/exmeritus/hww1u1a/hww1u1a.c
deleted file mode 100644
index 643ece1ae6..0000000000
--- a/board/exmeritus/hww1u1a/hww1u1a.c
+++ /dev/null
@@ -1,268 +0,0 @@
-/*
- * Copyright 2009-2011 eXMeritus, A Boeing Company
- * Copyright 2007-2009 Freescale Semiconductor, Inc.
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-
-#include <common.h>
-#include <command.h>
-#include <pci.h>
-#include <asm/processor.h>
-#include <asm/mmu.h>
-#include <asm/cache.h>
-#include <asm/immap_85xx.h>
-#include <asm/fsl_pci.h>
-#include <fsl_ddr_sdram.h>
-#include <asm/io.h>
-#include <miiphy.h>
-#include <libfdt.h>
-#include <linux/ctype.h>
-#include <fdt_support.h>
-#include <fsl_mdio.h>
-#include <tsec.h>
-#include <asm/fsl_law.h>
-#include <netdev.h>
-#include <malloc.h>
-#include <i2c.h>
-#include <pca953x.h>
-
-#include "gpios.h"
-
-DECLARE_GLOBAL_DATA_PTR;
-
-int checkboard(void)
-{
-	unsigned int gpio_high = 0;
-	unsigned int gpio_low  = 0;
-	unsigned int gpio_in   = 0;
-	unsigned int i;
-	struct ccsr_ddr __iomem *ddr;
-
-	puts("Board: HWW-1U-1A ");
-
-	/*
-	 * First just figure out which CPU we're on, then use that to
-	 * configure the lists of other GPIOs to be programmed.
-	 */
-	mpc85xx_gpio_set_in(GPIO_CPU_ID);
-	if (hww1u1a_is_cpu_a()) {
-		puts("CPU A\n");
-
-		/* We want to turn on some LEDs */
-		gpio_high |= GPIO_CPUA_CPU_READY;
-		gpio_low  |= GPIO_CPUA_DEBUG_LED1;
-		gpio_low  |= GPIO_CPUA_DEBUG_LED2;
-
-		/* Disable the unused transmitters */
-		gpio_low  |= GPIO_CPUA_TDIS1A;
-		gpio_high |= GPIO_CPUA_TDIS1B;
-		gpio_low  |= GPIO_CPUA_TDIS2A;
-		gpio_high |= GPIO_CPUA_TDIS2B;
-	} else {
-		puts("CPU B\n");
-
-		/* We want to turn on some LEDs */
-		gpio_high |= GPIO_CPUB_CPU_READY;
-		gpio_low  |= GPIO_CPUB_DEBUG_LED1;
-		gpio_low  |= GPIO_CPUB_DEBUG_LED2;
-
-		/* Enable the appropriate receivers */
-		gpio_high |= GPIO_CPUB_RMUX_SEL0A;
-		gpio_high |= GPIO_CPUB_RMUX_SEL0B;
-		gpio_low  |= GPIO_CPUB_RMUX_SEL1A;
-		gpio_low  |= GPIO_CPUB_RMUX_SEL1B;
-	}
-
-	/* These GPIOs are common */
-	gpio_in   |= IRQ_I2CINT | IRQ_FANINT | IRQ_DIMM_EVENT;
-	gpio_low  |= GPIO_RS422_RE;
-	gpio_high |= GPIO_RS422_DE;
-
-	/* Ok, now go ahead and program all of those in one go */
-	mpc85xx_gpio_set(gpio_high|gpio_low|gpio_in,
-			 gpio_high|gpio_low,
-			 gpio_high);
-
-	/*
-	 * If things have been taken out of reset early (for example, by one
-	 * of the BDI3000 debuggers), then we need to put them back in reset
-	 * and delay a while before we continue.
-	 */
-	if (mpc85xx_gpio_get(GPIO_RESETS)) {
-		ddr = (struct ccsr_ddr __iomem *)CONFIG_SYS_FSL_DDR_ADDR;
-
-		puts("Debugger detected... extra device reset enabled!\n");
-
-		/* Put stuff into reset and disable the DDR controller */
-		mpc85xx_gpio_set_low(GPIO_RESETS);
-		out_be32(&ddr->sdram_cfg, 0x00000000);
-
-		puts("    Waiting 1 sec for reset...");
-		for (i = 0; i < 10; i++) {
-			udelay(100000);
-			puts(".");
-		}
-		puts("\n");
-	}
-
-	/* Now bring everything back out of reset again */
-	mpc85xx_gpio_set_high(GPIO_RESETS);
-	return 0;
-}
-
-/*
- * This little shell function just returns whether or not it's CPU A.
- * It can be used to select the right device-tree when booting, etc.
- */
-int do_hww1u1a_test_cpu_a(cmd_tbl_t *cmdtp, int flag,
-		int argc, char * const argv[])
-{
-	if (argc > 1)
-		cmd_usage(cmdtp);
-
-	if (hww1u1a_is_cpu_a())
-		return 0;
-	else
-		return 1;
-}
-U_BOOT_CMD(
-	test_cpu_a, 1, 0, do_hww1u1a_test_cpu_a,
-	"Test if this is CPU A (versus B) on the eXMeritus HWW-1U-1A board",
-	""
-);
-
-/* Create a prompt-like string: "uboot@HOSTNAME% " */
-#define PROMPT_PREFIX "uboot@exm"
-#define PROMPT_SUFFIX "% "
-
-/* This function returns a PS1 prompt based on the serial number */
-static char *hww1u1a_prompt;
-const char *hww1u1a_get_ps1(void)
-{
-	unsigned long len, i, j;
-	const char *serialnr;
-
-	/* If our prompt was already set, just use that */
-	if (hww1u1a_prompt)
-		return hww1u1a_prompt;
-
-	/* Use our serial number if present, otherwise a default */
-	serialnr = getenv("serial#");
-	if (!serialnr || !serialnr[0])
-		serialnr = "999999-X";
-
-	/*
-	 * We will turn the serial number into a hostname by:
-	 *   (A) Delete all non-alphanumerics.
-	 *   (B) Lowercase all letters.
-	 *   (C) Prefix "exm".
-	 *   (D) Suffix "a" for CPU A and "b" for CPU B.
-	 */
-	for (i = 0, len = 0; serialnr[i]; i++) {
-		if (isalnum(serialnr[i]))
-			len++;
-	}
-
-	len += sizeof(PROMPT_PREFIX PROMPT_SUFFIX) + 1; /* Includes NUL */
-	hww1u1a_prompt = malloc(len);
-	if (!hww1u1a_prompt)
-		return PROMPT_PREFIX "UNKNOWN(ENOMEM)" PROMPT_SUFFIX;
-
-	/* Now actually fill it in */
-	i = 0;
-
-	/* Handle the prefix */
-	for (j = 0; j < sizeof(PROMPT_PREFIX) - 1; j++)
-		hww1u1a_prompt[i++] = PROMPT_PREFIX[j];
-
-	/* Now the serial# part of the hostname */
-	for (j = 0; serialnr[j]; j++)
-		if (isalnum(serialnr[j]))
-			hww1u1a_prompt[i++] = tolower(serialnr[j]);
-
-	/* Now the CPU id ("a" or "b") */
-	hww1u1a_prompt[i++] = hww1u1a_is_cpu_a() ? 'a' : 'b';
-
-	/* Finally the suffix */
-	for (j = 0; j < sizeof(PROMPT_SUFFIX); j++)
-		hww1u1a_prompt[i++] = PROMPT_SUFFIX[j];
-
-	/* This should all have added up, but just in case */
-	hww1u1a_prompt[len - 1] = '\0';
-
-	/* Now we're done */
-	return hww1u1a_prompt;
-}
-
-void pci_init_board(void)
-{
-	fsl_pcie_init_board(0);
-}
-
-int board_early_init_r(void)
-{
-	const unsigned int flashbase = CONFIG_SYS_FLASH_BASE;
-	int flash_esel = find_tlb_idx((void *)flashbase, 1);
-
-	/*
-	 * Remap bootflash region to caching-inhibited
-	 * so that flash can be erased properly.
-	 */
-
-	/* Flush d-cache and invalidate i-cache of any FLASH data */
-	flush_dcache();
-	invalidate_icache();
-
-	if (flash_esel == -1) {
-		/* very unlikely unless something is messed up */
-		puts("Error: Could not find TLB for FLASH BASE\n");
-		flash_esel = 2;	/* give our best effort to continue */
-	} else {
-		/* invalidate existing TLB entry for FLASH */
-		disable_tlb(flash_esel);
-	}
-
-	set_tlb(1, flashbase, CONFIG_SYS_FLASH_BASE_PHYS,
-			MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
-			0, flash_esel, BOOKE_PAGESZ_256M, 1);
-
-	return 0;
-}
-
-int board_eth_init(bd_t *bis)
-{
-	struct tsec_info_struct tsec_info[4];
-	struct fsl_pq_mdio_info mdio_info;
-
-	SET_STD_TSEC_INFO(tsec_info[0], 1);
-	SET_STD_TSEC_INFO(tsec_info[1], 2);
-	SET_STD_TSEC_INFO(tsec_info[2], 3);
-
-	if (hww1u1a_is_cpu_a())
-		tsec_info[2].phyaddr = TSEC3_PHY_ADDR_CPUA;
-	else
-		tsec_info[2].phyaddr = TSEC3_PHY_ADDR_CPUB;
-
-	mdio_info.regs = (struct tsec_mii_mng *)CONFIG_SYS_MDIO_BASE_ADDR;
-	mdio_info.name = DEFAULT_MII_NAME;
-	fsl_pq_mdio_init(bis, &mdio_info);
-
-	tsec_eth_init(bis, tsec_info, 3);
-	return pci_eth_init(bis);
-}
-
-void ft_board_setup(void *blob, bd_t *bd)
-{
-	phys_addr_t base;
-	phys_size_t size;
-
-	ft_cpu_setup(blob, bd);
-
-	base = getenv_bootm_low();
-	size = getenv_bootm_size();
-
-	fdt_fixup_memory(blob, (u64)base, (u64)size);
-
-	FT_FSL_PCI_SETUP;
-}