diff options
Diffstat (limited to 'board/freescale/ls1012ardb/eth.c')
| -rw-r--r-- | board/freescale/ls1012ardb/eth.c | 45 |
1 files changed, 37 insertions, 8 deletions
diff --git a/board/freescale/ls1012ardb/eth.c b/board/freescale/ls1012ardb/eth.c index e6379a3d0d..8e6cd0ac3b 100644 --- a/board/freescale/ls1012ardb/eth.c +++ b/board/freescale/ls1012ardb/eth.c @@ -26,6 +26,7 @@ static inline void ls1012ardb_reset_phy(void) { +#ifdef CONFIG_TARGET_LS1012ARDB /* Through reset IO expander reset both RGMII and SGMII PHYs */ i2c_reg_write(I2C_MUX_IO2_ADDR, 6, __PHY_MASK); i2c_reg_write(I2C_MUX_IO2_ADDR, 2, __PHY_ETH2_MASK); @@ -34,6 +35,7 @@ static inline void ls1012ardb_reset_phy(void) mdelay(10); i2c_reg_write(I2C_MUX_IO2_ADDR, 2, 0xFF); mdelay(50); +#endif } int pfe_eth_board_init(struct udevice *dev) @@ -42,6 +44,11 @@ int pfe_eth_board_init(struct udevice *dev) struct mii_dev *bus; struct pfe_mdio_info mac_mdio_info; struct pfe_eth_dev *priv = dev_get_priv(dev); + struct ccsr_gur __iomem *gur = (void *)CONFIG_SYS_FSL_GUTS_ADDR; + + int srds_s1 = in_be32(&gur->rcwsr[4]) & + FSL_CHASSIS2_RCWSR4_SRDS1_PRTCL_MASK; + srds_s1 >>= FSL_CHASSIS2_RCWSR4_SRDS1_PRTCL_SHIFT; if (!init_done) { ls1012ardb_reset_phy(); @@ -59,14 +66,36 @@ int pfe_eth_board_init(struct udevice *dev) pfe_set_mdio(priv->gemac_port, miiphy_get_dev_by_name(DEFAULT_PFE_MDIO_NAME)); - if (!priv->gemac_port) { - /* MAC1 */ - pfe_set_phy_address_mode(priv->gemac_port, EMAC1_PHY_ADDR, - PHY_INTERFACE_MODE_SGMII); - } else { - /* MAC2 */ - pfe_set_phy_address_mode(priv->gemac_port, EMAC2_PHY_ADDR, - PHY_INTERFACE_MODE_RGMII_TXID); + switch (srds_s1) { + case 0x3508: + if (!priv->gemac_port) { + /* MAC1 */ + pfe_set_phy_address_mode(priv->gemac_port, + CONFIG_PFE_EMAC1_PHY_ADDR, + PHY_INTERFACE_MODE_SGMII); + } else { + /* MAC2 */ + pfe_set_phy_address_mode(priv->gemac_port, + CONFIG_PFE_EMAC2_PHY_ADDR, + PHY_INTERFACE_MODE_RGMII_TXID); + } + break; + case 0x2208: + if (!priv->gemac_port) { + /* MAC1 */ + pfe_set_phy_address_mode(priv->gemac_port, + CONFIG_PFE_EMAC1_PHY_ADDR, + PHY_INTERFACE_MODE_SGMII_2500); + } else { + /* MAC2 */ + pfe_set_phy_address_mode(priv->gemac_port, + CONFIG_PFE_EMAC2_PHY_ADDR, + PHY_INTERFACE_MODE_SGMII_2500); + } + break; + default: + printf("unsupported SerDes PRCTL= %d\n", srds_s1); + break; } return 0; } |