summaryrefslogtreecommitdiff
path: root/board/freescale/ls2080a
diff options
context:
space:
mode:
Diffstat (limited to 'board/freescale/ls2080a')
-rw-r--r--board/freescale/ls2080a/ddr.c55
-rw-r--r--board/freescale/ls2080a/ls2080a.c17
2 files changed, 10 insertions, 62 deletions
diff --git a/board/freescale/ls2080a/ddr.c b/board/freescale/ls2080a/ddr.c
index e6130ec709..5ed9e1461b 100644
--- a/board/freescale/ls2080a/ddr.c
+++ b/board/freescale/ls2080a/ddr.c
@@ -169,58 +169,3 @@ phys_size_t initdram(int board_type)
return dram_size;
}
-
-void dram_init_banksize(void)
-{
-#ifdef CONFIG_SYS_DP_DDR_BASE_PHY
- phys_size_t dp_ddr_size;
-#endif
-
- /*
- * gd->arch.secure_ram tracks the location of secure memory.
- * It was set as if the memory starts from 0.
- * The address needs to add the offset of its bank.
- */
- gd->bd->bi_dram[0].start = CONFIG_SYS_SDRAM_BASE;
- if (gd->ram_size > CONFIG_SYS_LS2_DDR_BLOCK1_SIZE) {
- gd->bd->bi_dram[0].size = CONFIG_SYS_LS2_DDR_BLOCK1_SIZE;
- gd->bd->bi_dram[1].start = CONFIG_SYS_DDR_BLOCK2_BASE;
- gd->bd->bi_dram[1].size = gd->ram_size -
- CONFIG_SYS_LS2_DDR_BLOCK1_SIZE;
-#ifdef CONFIG_SYS_MEM_RESERVE_SECURE
- gd->arch.secure_ram = gd->bd->bi_dram[1].start +
- gd->arch.secure_ram -
- CONFIG_SYS_LS2_DDR_BLOCK1_SIZE;
- gd->arch.secure_ram |= MEM_RESERVE_SECURE_MAINTAINED;
-#endif
- } else {
- gd->bd->bi_dram[0].size = gd->ram_size;
-#ifdef CONFIG_SYS_MEM_RESERVE_SECURE
- gd->arch.secure_ram = gd->bd->bi_dram[0].start +
- gd->arch.secure_ram;
- gd->arch.secure_ram |= MEM_RESERVE_SECURE_MAINTAINED;
-#endif
- }
-
-#ifdef CONFIG_SYS_DP_DDR_BASE_PHY
- if (soc_has_dp_ddr()) {
- /* initialize DP-DDR here */
- puts("DP-DDR: ");
- /*
- * DDR controller use 0 as the base address for binding.
- * It is mapped to CONFIG_SYS_DP_DDR_BASE for core to access.
- */
- dp_ddr_size = fsl_other_ddr_sdram(CONFIG_SYS_DP_DDR_BASE_PHY,
- CONFIG_DP_DDR_CTRL,
- CONFIG_DP_DDR_NUM_CTRLS,
- CONFIG_DP_DDR_DIMM_SLOTS_PER_CTLR,
- NULL, NULL, NULL);
- if (dp_ddr_size) {
- gd->bd->bi_dram[2].start = CONFIG_SYS_DP_DDR_BASE;
- gd->bd->bi_dram[2].size = dp_ddr_size;
- } else {
- puts("Not detected");
- }
- }
-#endif
-}
diff --git a/board/freescale/ls2080a/ls2080a.c b/board/freescale/ls2080a/ls2080a.c
index 4f9b9c8a77..9e7701d81f 100644
--- a/board/freescale/ls2080a/ls2080a.c
+++ b/board/freescale/ls2080a/ls2080a.c
@@ -49,13 +49,6 @@ void detail_board_ddr_info(void)
#endif
}
-int dram_init(void)
-{
- gd->ram_size = initdram(0);
-
- return 0;
-}
-
#if defined(CONFIG_ARCH_MISC_INIT)
int arch_misc_init(void)
{
@@ -123,6 +116,16 @@ int ft_board_setup(void *blob, bd_t *bd)
base[1] = gd->bd->bi_dram[1].start;
size[1] = gd->bd->bi_dram[1].size;
+#ifdef CONFIG_RESV_RAM
+ /* reduce size if reserved memory is within this bank */
+ if (gd->arch.resv_ram >= base[0] &&
+ gd->arch.resv_ram < base[0] + size[0])
+ size[0] = gd->arch.resv_ram - base[0];
+ else if (gd->arch.resv_ram >= base[1] &&
+ gd->arch.resv_ram < base[1] + size[1])
+ size[1] = gd->arch.resv_ram - base[1];
+#endif
+
fdt_fixup_memory_banks(blob, base, size, 2);
#ifdef CONFIG_FSL_MC_ENET