2 files changed, 10 insertions, 63 deletions

diff --git a/board/freescale/ls2080ardb/ddr.c b/board/freescale/ls2080ardb/ddr.c
index 959dfeb02b..2851d5b443 100644
--- a/board/freescale/ls2080ardb/ddr.c
+++ b/board/freescale/ls2080ardb/ddr.c
@@ -172,58 +172,3 @@ phys_size_t initdram(int board_type)
 
 	return dram_size;
 }
-
-void dram_init_banksize(void)
-{
-#ifdef CONFIG_SYS_DP_DDR_BASE_PHY
-	phys_size_t dp_ddr_size;
-#endif
-
-	/*
-	 * gd->arch.secure_ram tracks the location of secure memory.
-	 * It was set as if the memory starts from 0.
-	 * The address needs to add the offset of its bank.
-	 */
-	gd->bd->bi_dram[0].start = CONFIG_SYS_SDRAM_BASE;
-	if (gd->ram_size > CONFIG_SYS_LS2_DDR_BLOCK1_SIZE) {
-		gd->bd->bi_dram[0].size = CONFIG_SYS_LS2_DDR_BLOCK1_SIZE;
-		gd->bd->bi_dram[1].start = CONFIG_SYS_DDR_BLOCK2_BASE;
-		gd->bd->bi_dram[1].size = gd->ram_size -
-					  CONFIG_SYS_LS2_DDR_BLOCK1_SIZE;
-#ifdef CONFIG_SYS_MEM_RESERVE_SECURE
-		gd->arch.secure_ram = gd->bd->bi_dram[1].start +
-				      gd->arch.secure_ram -
-				      CONFIG_SYS_LS2_DDR_BLOCK1_SIZE;
-		gd->arch.secure_ram |= MEM_RESERVE_SECURE_MAINTAINED;
-#endif
-	} else {
-		gd->bd->bi_dram[0].size = gd->ram_size;
-#ifdef CONFIG_SYS_MEM_RESERVE_SECURE
-		gd->arch.secure_ram = gd->bd->bi_dram[0].start +
-				      gd->arch.secure_ram;
-		gd->arch.secure_ram |= MEM_RESERVE_SECURE_MAINTAINED;
-#endif
-	}
-
-#ifdef CONFIG_SYS_DP_DDR_BASE_PHY
-	if (soc_has_dp_ddr()) {
-		/* initialize DP-DDR here */
-		puts("DP-DDR:  ");
-		/*
-		 * DDR controller use 0 as the base address for binding.
-		 * It is mapped to CONFIG_SYS_DP_DDR_BASE for core to access.
-		 */
-		dp_ddr_size = fsl_other_ddr_sdram(CONFIG_SYS_DP_DDR_BASE_PHY,
-					  CONFIG_DP_DDR_CTRL,
-					  CONFIG_DP_DDR_NUM_CTRLS,
-					  CONFIG_DP_DDR_DIMM_SLOTS_PER_CTLR,
-					  NULL, NULL, NULL);
-		if (dp_ddr_size) {
-			gd->bd->bi_dram[2].start = CONFIG_SYS_DP_DDR_BASE;
-			gd->bd->bi_dram[2].size = dp_ddr_size;
-		} else {
-			puts("Not detected");
-		}
-	}
-#endif
-}
diff --git a/board/freescale/ls2080ardb/ls2080ardb.c b/board/freescale/ls2080ardb/ls2080ardb.c
index 02954ef6d7..7a4c6a3a5c 100644
--- a/board/freescale/ls2080ardb/ls2080ardb.c
+++ b/board/freescale/ls2080ardb/ls2080ardb.c
@@ -202,14 +202,6 @@ int misc_init_r(void)
 	if (adjust_vdd(0))
 		printf("Warning: Adjusting core voltage failed.\n");
 
-#if defined(CONFIG_EFI_LOADER) && !defined(CONFIG_SPL_BUILD)
-	if (soc_has_dp_ddr() && gd->bd->bi_dram[2].size) {
-		efi_add_memory_map(gd->bd->bi_dram[2].start,
-				   gd->bd->bi_dram[2].size >> EFI_PAGE_SHIFT,
-				   EFI_RESERVED_MEMORY_TYPE, false);
-	}
-#endif
-
 	return 0;
 }
 
@@ -286,6 +278,16 @@ int ft_board_setup(void *blob, bd_t *bd)
 	base[1] = gd->bd->bi_dram[1].start;
 	size[1] = gd->bd->bi_dram[1].size;
 
+#ifdef CONFIG_RESV_RAM
+	/* reduce size if reserved memory is within this bank */
+	if (gd->arch.resv_ram >= base[0] &&
+	    gd->arch.resv_ram < base[0] + size[0])
+		size[0] = gd->arch.resv_ram - base[0];
+	else if (gd->arch.resv_ram >= base[1] &&
+		 gd->arch.resv_ram < base[1] + size[1])
+		size[1] = gd->arch.resv_ram - base[1];
+#endif
+
 	fdt_fixup_memory_banks(blob, base, size, 2);
 
 	fsl_fdt_fixup_dr_usb(blob, bd);