diff options
Diffstat (limited to 'board/freescale/mx6qsabreauto/mx6qsabreauto.c')
| -rw-r--r-- | board/freescale/mx6qsabreauto/mx6qsabreauto.c | 16 |
1 files changed, 8 insertions, 8 deletions
diff --git a/board/freescale/mx6qsabreauto/mx6qsabreauto.c b/board/freescale/mx6qsabreauto/mx6qsabreauto.c index 836d7221b0..1cb7561759 100644 --- a/board/freescale/mx6qsabreauto/mx6qsabreauto.c +++ b/board/freescale/mx6qsabreauto/mx6qsabreauto.c @@ -50,12 +50,12 @@ int dram_init(void) return 0; } -iomux_v3_cfg_t const uart4_pads[] = { +static iomux_v3_cfg_t const uart4_pads[] = { MX6_PAD_KEY_COL0__UART4_TX_DATA | MUX_PAD_CTRL(UART_PAD_CTRL), MX6_PAD_KEY_ROW0__UART4_RX_DATA | MUX_PAD_CTRL(UART_PAD_CTRL), }; -iomux_v3_cfg_t const enet_pads[] = { +static iomux_v3_cfg_t const enet_pads[] = { MX6_PAD_KEY_COL1__ENET_MDIO | MUX_PAD_CTRL(ENET_PAD_CTRL), MX6_PAD_KEY_COL2__ENET_MDC | MUX_PAD_CTRL(ENET_PAD_CTRL), MX6_PAD_RGMII_TXC__RGMII_TXC | MUX_PAD_CTRL(ENET_PAD_CTRL), @@ -74,7 +74,7 @@ iomux_v3_cfg_t const enet_pads[] = { }; /* I2C2 PMIC, iPod, Tuner, Codec, Touch, HDMI EDID, MIPI CSI2 card */ -struct i2c_pads_info i2c_pad_info1 = { +static struct i2c_pads_info i2c_pad_info1 = { .scl = { .i2c_mode = MX6_PAD_EIM_EB2__I2C2_SCL | PC, .gpio_mode = MX6_PAD_EIM_EB2__GPIO2_IO30 | PC, @@ -91,7 +91,7 @@ struct i2c_pads_info i2c_pad_info1 = { * I2C3 MLB, Port Expanders (A, B, C), Video ADC, Light Sensor, * Compass Sensor, Accelerometer, Res Touch */ -struct i2c_pads_info i2c_pad_info2 = { +static struct i2c_pads_info i2c_pad_info2 = { .scl = { .i2c_mode = MX6_PAD_GPIO_3__I2C3_SCL | PC, .gpio_mode = MX6_PAD_GPIO_3__GPIO1_IO03 | PC, @@ -104,11 +104,11 @@ struct i2c_pads_info i2c_pad_info2 = { } }; -iomux_v3_cfg_t const i2c3_pads[] = { +static iomux_v3_cfg_t const i2c3_pads[] = { MX6_PAD_EIM_A24__GPIO5_IO04 | MUX_PAD_CTRL(NO_PAD_CTRL), }; -iomux_v3_cfg_t const port_exp[] = { +static iomux_v3_cfg_t const port_exp[] = { MX6_PAD_SD2_DAT0__GPIO1_IO15 | MUX_PAD_CTRL(NO_PAD_CTRL), }; @@ -117,7 +117,7 @@ static void setup_iomux_enet(void) imx_iomux_v3_setup_multiple_pads(enet_pads, ARRAY_SIZE(enet_pads)); } -iomux_v3_cfg_t const usdhc3_pads[] = { +static iomux_v3_cfg_t const usdhc3_pads[] = { MX6_PAD_SD3_CLK__SD3_CLK | MUX_PAD_CTRL(USDHC_PAD_CTRL), MX6_PAD_SD3_CMD__SD3_CMD | MUX_PAD_CTRL(USDHC_PAD_CTRL), MX6_PAD_SD3_DAT0__SD3_DATA0 | MUX_PAD_CTRL(USDHC_PAD_CTRL), @@ -138,7 +138,7 @@ static void setup_iomux_uart(void) } #ifdef CONFIG_FSL_ESDHC -struct fsl_esdhc_cfg usdhc_cfg[1] = { +static struct fsl_esdhc_cfg usdhc_cfg[1] = { {USDHC3_BASE_ADDR}, }; |