1 files changed, 0 insertions, 141 deletions
diff --git a/board/freescale/p1_p2_rdb/spl.c b/board/freescale/p1_p2_rdb/spl.c
deleted file mode 100644
index f30c5fe3e6..0000000000
--- a/board/freescale/p1_p2_rdb/spl.c
+++ /dev/null
@@ -1,141 +0,0 @@
-/*
- * Copyright 2013 Freescale Semiconductor, Inc.
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-
-#include <common.h>
-#include <ns16550.h>
-#include <malloc.h>
-#include <mmc.h>
-#include <nand.h>
-#include <i2c.h>
-#include <fsl_esdhc.h>
-#include <spi_flash.h>
-
-DECLARE_GLOBAL_DATA_PTR;
-
-#define SYSCLK_MASK	0x00200000
-#define BOARDREV_MASK	0x10100000
-
-#define SYSCLK_66	66666666
-#define SYSCLK_100	100000000
-
-unsigned long get_board_sys_clk(ulong dummy)
-{
-	ccsr_gpio_t *pgpio = (void *)(CONFIG_SYS_MPC85xx_GPIO_ADDR);
-	u32 val_gpdat, sysclk_gpio;
-
-	val_gpdat = in_be32(&pgpio->gpdat);
-	sysclk_gpio = val_gpdat & SYSCLK_MASK;
-
-	if (sysclk_gpio == 0)
-		return SYSCLK_66;
-	else
-		return SYSCLK_100;
-
-	return 0;
-}
-
-phys_size_t get_effective_memsize(void)
-{
-	return CONFIG_SYS_L2_SIZE;
-}
-
-void board_init_f(ulong bootflag)
-{
-	u32 plat_ratio, bus_clk;
-	ccsr_gur_t *gur = (void *)CONFIG_SYS_MPC85xx_GUTS_ADDR;
-
-	console_init_f();
-
-	/* Set pmuxcr to allow both i2c1 and i2c2 */
-	setbits_be32(&gur->pmuxcr, in_be32(&gur->pmuxcr) | 0x1000);
-	setbits_be32(&gur->pmuxcr,
-		     in_be32(&gur->pmuxcr) | MPC85xx_PMUXCR_SD_DATA);
-
-	/* Read back the register to synchronize the write. */
-	in_be32(&gur->pmuxcr);
-
-#ifdef CONFIG_SPL_SPI_BOOT
-	clrbits_be32(&gur->pmuxcr, MPC85xx_PMUXCR_SD_DATA);
-#endif
-
-	/* initialize selected port with appropriate baud rate */
-	plat_ratio = in_be32(&gur->porpllsr) & MPC85xx_PORPLLSR_PLAT_RATIO;
-	plat_ratio >>= 1;
-	bus_clk = CONFIG_SYS_CLK_FREQ * plat_ratio;
-	gd->bus_clk = bus_clk;
-
-	NS16550_init((NS16550_t)CONFIG_SYS_NS16550_COM1,
-		     bus_clk / 16 / CONFIG_BAUDRATE);
-#ifdef CONFIG_SPL_MMC_BOOT
-	puts("\nSD boot...\n");
-#elif defined(CONFIG_SPL_SPI_BOOT)
-	puts("\nSPI Flash boot...\n");
-#endif
-
-	/* copy code to RAM and jump to it - this should not return */
-	/* NOTE - code has to be copied out of NAND buffer before
-	 * other blocks can be read.
-	 */
-	relocate_code(CONFIG_SPL_RELOC_STACK, 0, CONFIG_SPL_RELOC_TEXT_BASE);
-}
-
-void board_init_r(gd_t *gd, ulong dest_addr)
-{
-	/* Pointer is writable since we allocated a register for it */
-	gd = (gd_t *)CONFIG_SPL_GD_ADDR;
-	bd_t *bd;
-
-	memset(gd, 0, sizeof(gd_t));
-	bd = (bd_t *)(CONFIG_SPL_GD_ADDR + sizeof(gd_t));
-	memset(bd, 0, sizeof(bd_t));
-	gd->bd = bd;
-	bd->bi_memstart = CONFIG_SYS_INIT_L2_ADDR;
-	bd->bi_memsize = CONFIG_SYS_L2_SIZE;
-
-	probecpu();
-	get_clocks();
-	mem_malloc_init(CONFIG_SPL_RELOC_MALLOC_ADDR,
-			CONFIG_SPL_RELOC_MALLOC_SIZE);
-
-#ifdef CONFIG_SPL_MMC_BOOT
-	mmc_initialize(bd);
-#endif
-	/* relocate environment function pointers etc. */
-#ifdef CONFIG_SPL_NAND_BOOT
-	nand_spl_load_image(CONFIG_ENV_OFFSET, CONFIG_ENV_SIZE,
-			    (uchar *)CONFIG_ENV_ADDR);
-#endif
-#ifdef CONFIG_SPL_NAND_BOOT
-	nand_spl_load_image(CONFIG_ENV_OFFSET, CONFIG_ENV_SIZE,
-			    (uchar *)CONFIG_ENV_ADDR);
-#endif
-#ifdef CONFIG_SPL_MMC_BOOT
-	mmc_spl_load_image(CONFIG_ENV_OFFSET, CONFIG_ENV_SIZE,
-			   (uchar *)CONFIG_ENV_ADDR);
-#endif
-#ifdef CONFIG_SPL_SPI_BOOT
-	spi_spl_load_image(CONFIG_ENV_OFFSET, CONFIG_ENV_SIZE,
-			   (uchar *)CONFIG_ENV_ADDR);
-#endif
-
-	gd->env_addr  = (ulong)(CONFIG_ENV_ADDR);
-	gd->env_valid = 1;
-
-	gd->ram_size = initdram(0);
-#ifdef CONFIG_SPL_NAND_BOOT
-	puts("Tertiary program loader running in sram...");
-#else
-	puts("Second program loader running in sram...\n");
-#endif
-
-#ifdef CONFIG_SPL_MMC_BOOT
-	mmc_boot();
-#elif defined(CONFIG_SPL_SPI_BOOT)
-	spi_boot();
-#elif defined(CONFIG_SPL_NAND_BOOT)
-	nand_boot();
-#endif
-}