summaryrefslogtreecommitdiff
path: root/board/freescale
diff options
context:
space:
mode:
Diffstat (limited to 'board/freescale')
-rw-r--r--board/freescale/mx28evk/README22
-rw-r--r--board/freescale/mx6qsabreauto/mx6dl.cfg130
-rw-r--r--board/freescale/mx6sabresd/mx6sabresd.c84
-rw-r--r--board/freescale/vf610twr/vf610twr.c29
4 files changed, 260 insertions, 5 deletions
diff --git a/board/freescale/mx28evk/README b/board/freescale/mx28evk/README
index 0389a1d86c..958ebc6791 100644
--- a/board/freescale/mx28evk/README
+++ b/board/freescale/mx28evk/README
@@ -23,11 +23,19 @@ To boot MX28EVK from an SD card, set the boot mode DIP switches as:
* VDD 5V: To the left (off)
* Hold Button: Down (off)
+To boot MX28EVK from SPI NOR flash, set the boot mode DIP switches as:
+
+ * Boot Mode Select: 0 0 1 0 (Boot from SSP2)
+ * JTAG PSWITCH RESET: To the right (reset disabled)
+ * Battery Source: Down
+ * Wall 5V: Up
+ * VDD 5V: To the left (off)
+ * Hold Button: Down (off)
Environment Storage
-------------------
-There are two targets for mx28evk:
+There are three targets for mx28evk:
"make mx28evk_config" - store environment variables into MMC
@@ -35,12 +43,20 @@ or
"make mx28evk_nand_config" - store environment variables into NAND flash
+or
+
+"make mx28evk_spi_config" - store enviroment variables into SPI NOR flash
+
Choose the target accordingly.
Note: The mx28evk board does not come with a NAND flash populated from the
factory. It comes with an empty slot (U23), which allows the insertion of a
48-pin TSOP flash device.
-Follow the instructions from doc/README.mxs to generate a bootable SD card.
+mx28evk does not come with SPI NOR flash populated from the factory either.
+It is possible to solder a SOIC memory on U49 or use a DIP8 on J89.
+To get SPI communication to work R320, R321,R322 and C178 need to be populated.
+Look in the schematics for the proper component values.
-Insert the SD card in slot 0, power up the board and U-boot will boot.
+Follow the instructions from doc/README.mxs to generate a bootable SD card or
+to generate a binary to be flashed into SPI NOR.
diff --git a/board/freescale/mx6qsabreauto/mx6dl.cfg b/board/freescale/mx6qsabreauto/mx6dl.cfg
new file mode 100644
index 0000000000..89078e5653
--- /dev/null
+++ b/board/freescale/mx6qsabreauto/mx6dl.cfg
@@ -0,0 +1,130 @@
+/*
+ * Copyright (C) 2013 Freescale Semiconductor, Inc.
+ * Jason Liu <r64343@freescale.com>
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ *
+ * Refer doc/README.imximage for more details about how-to configure
+ * and create imximage boot image
+ *
+ * The syntax is taken as close as possible with the kwbimage
+ */
+/* image version */
+
+IMAGE_VERSION 2
+
+/*
+ * Boot Device : one of
+ * spi, sd (the board has no nand neither onenand)
+ */
+BOOT_FROM sd
+
+/*
+ * Device Configuration Data (DCD)
+ *
+ * Each entry must have the format:
+ * Addr-type Address Value
+ *
+ * where:
+ * Addr-type register length (1,2 or 4 bytes)
+ * Address absolute address of the register
+ * value value to be stored in the register
+ */
+DATA 4 0x020e0774 0x000C0000
+DATA 4 0x020e0754 0x00000000
+DATA 4 0x020e04ac 0x00000030
+DATA 4 0x020e04b0 0x00000030
+DATA 4 0x020e0464 0x00000030
+DATA 4 0x020e0490 0x00000030
+DATA 4 0x020e074c 0x00000030
+DATA 4 0x020e0494 0x00000030
+DATA 4 0x020e04a0 0x00000000
+DATA 4 0x020e04b4 0x00000030
+DATA 4 0x020e04b8 0x00000030
+DATA 4 0x020e076c 0x00000030
+DATA 4 0x020e0750 0x00020000
+DATA 4 0x020e04bc 0x00000028
+DATA 4 0x020e04c0 0x00000028
+DATA 4 0x020e04c4 0x00000028
+DATA 4 0x020e04c8 0x00000028
+DATA 4 0x020e04cc 0x00000028
+DATA 4 0x020e04d0 0x00000028
+DATA 4 0x020e04d4 0x00000028
+DATA 4 0x020e04d8 0x00000028
+DATA 4 0x020e0760 0x00020000
+DATA 4 0x020e0764 0x00000028
+DATA 4 0x020e0770 0x00000028
+DATA 4 0x020e0778 0x00000028
+DATA 4 0x020e077c 0x00000028
+DATA 4 0x020e0780 0x00000028
+DATA 4 0x020e0784 0x00000028
+DATA 4 0x020e078c 0x00000028
+DATA 4 0x020e0748 0x00000028
+DATA 4 0x020e0470 0x00000028
+DATA 4 0x020e0474 0x00000028
+DATA 4 0x020e0478 0x00000028
+DATA 4 0x020e047c 0x00000028
+DATA 4 0x020e0480 0x00000028
+DATA 4 0x020e0484 0x00000028
+DATA 4 0x020e0488 0x00000028
+DATA 4 0x020e048c 0x00000028
+DATA 4 0x021b0800 0xa1390003
+DATA 4 0x021b080c 0x001F001F
+DATA 4 0x021b0810 0x001F001F
+DATA 4 0x021b480c 0x001F001F
+DATA 4 0x021b4810 0x001F001F
+DATA 4 0x021b083c 0x42190217
+DATA 4 0x021b0840 0x017B017B
+DATA 4 0x021b483c 0x4176017B
+DATA 4 0x021b4840 0x015F016C
+DATA 4 0x021b0848 0x4C4C4D4C
+DATA 4 0x021b4848 0x4A4D4C48
+DATA 4 0x021b0850 0x3F3F3F40
+DATA 4 0x021b4850 0x3538382E
+DATA 4 0x021b081c 0x33333333
+DATA 4 0x021b0820 0x33333333
+DATA 4 0x021b0824 0x33333333
+DATA 4 0x021b0828 0x33333333
+DATA 4 0x021b481c 0x33333333
+DATA 4 0x021b4820 0x33333333
+DATA 4 0x021b4824 0x33333333
+DATA 4 0x021b4828 0x33333333
+DATA 4 0x021b08b8 0x00000800
+DATA 4 0x021b48b8 0x00000800
+DATA 4 0x021b0004 0x00020025
+DATA 4 0x021b0008 0x00333030
+DATA 4 0x021b000c 0x676B5313
+DATA 4 0x021b0010 0xB66E8B63
+DATA 4 0x021b0014 0x01FF00DB
+DATA 4 0x021b0018 0x00001740
+DATA 4 0x021b001c 0x00008000
+DATA 4 0x021b002c 0x000026d2
+DATA 4 0x021b0030 0x006B1023
+DATA 4 0x021b0040 0x00000047
+DATA 4 0x021b0000 0x841A0000
+DATA 4 0x021b001c 0x04008032
+DATA 4 0x021b001c 0x00008033
+DATA 4 0x021b001c 0x00048031
+DATA 4 0x021b001c 0x05208030
+DATA 4 0x021b001c 0x04008040
+DATA 4 0x021b0020 0x00005800
+DATA 4 0x021b0818 0x00011117
+DATA 4 0x021b4818 0x00011117
+DATA 4 0x021b0004 0x00025565
+DATA 4 0x021b0404 0x00011006
+DATA 4 0x021b001c 0x00000000
+
+/* set the default clock gate to save power */
+DATA 4 0x020c4068 0x00C03F3F
+DATA 4 0x020c406c 0x0030FC03
+DATA 4 0x020c4070 0x0FFFC000
+DATA 4 0x020c4074 0x3FF00000
+DATA 4 0x020c4078 0xFFFFF300
+DATA 4 0x020c407c 0x0F0000C3
+DATA 4 0x020c4080 0x00000FFF
+
+/* enable AXI cache for VDOA/VPU/IPU */
+DATA 4 0x020e0010 0xF00000CF
+/* set IPU AXI-id0 Qos=0xf(bypass) AXI-id1 Qos=0x7 */
+DATA 4 0x020e0018 0x007F007F
+DATA 4 0x020e001c 0x007F007F
diff --git a/board/freescale/mx6sabresd/mx6sabresd.c b/board/freescale/mx6sabresd/mx6sabresd.c
index 3e314daec2..d7c4b4f148 100644
--- a/board/freescale/mx6sabresd/mx6sabresd.c
+++ b/board/freescale/mx6sabresd/mx6sabresd.c
@@ -12,6 +12,7 @@
#include <asm/arch/mx6-pins.h>
#include <asm/errno.h>
#include <asm/gpio.h>
+#include <asm/imx-common/mxc_i2c.h>
#include <asm/imx-common/iomux-v3.h>
#include <asm/imx-common/boot_mode.h>
#include <asm/imx-common/video.h>
@@ -23,6 +24,9 @@
#include <asm/arch/crm_regs.h>
#include <asm/io.h>
#include <asm/arch/sys_proto.h>
+#include <i2c.h>
+#include <power/pmic.h>
+#include <power/pfuze100_pmic.h>
DECLARE_GLOBAL_DATA_PTR;
#define UART_PAD_CTRL (PAD_CTL_PUS_100K_UP | \
@@ -39,6 +43,14 @@ DECLARE_GLOBAL_DATA_PTR;
#define SPI_PAD_CTRL (PAD_CTL_HYS | PAD_CTL_SPEED_MED | \
PAD_CTL_DSE_40ohm | PAD_CTL_SRE_FAST)
+#define I2C_PAD_CTRL (PAD_CTL_PUS_100K_UP | \
+ PAD_CTL_SPEED_MED | PAD_CTL_DSE_40ohm | PAD_CTL_HYS | \
+ PAD_CTL_ODE | PAD_CTL_SRE_FAST)
+
+#define I2C_PMIC 1
+
+#define I2C_PAD MUX_PAD_CTRL(I2C_PAD_CTRL)
+
int dram_init(void)
{
gd->ram_size = get_ram_size((void *)PHYS_SDRAM, PHYS_SDRAM_SIZE);
@@ -129,6 +141,19 @@ iomux_v3_cfg_t const ecspi1_pads[] = {
MX6_PAD_KEY_ROW1__GPIO4_IO09 | MUX_PAD_CTRL(NO_PAD_CTRL),
};
+static struct i2c_pads_info i2c_pad_info1 = {
+ .scl = {
+ .i2c_mode = MX6_PAD_KEY_COL3__I2C2_SCL | I2C_PAD,
+ .gpio_mode = MX6_PAD_KEY_COL3__GPIO4_IO12 | I2C_PAD,
+ .gp = IMX_GPIO_NR(4, 12)
+ },
+ .sda = {
+ .i2c_mode = MX6_PAD_KEY_ROW3__I2C2_SDA | I2C_PAD,
+ .gpio_mode = MX6_PAD_KEY_ROW3__GPIO4_IO13 | I2C_PAD,
+ .gp = IMX_GPIO_NR(4, 13)
+ }
+};
+
static void setup_spi(void)
{
imx_iomux_v3_setup_multiple_pads(ecspi1_pads, ARRAY_SIZE(ecspi1_pads));
@@ -426,6 +451,64 @@ int board_init(void)
#ifdef CONFIG_MXC_SPI
setup_spi();
#endif
+ setup_i2c(1, CONFIG_SYS_I2C_SPEED, 0x7f, &i2c_pad_info1);
+
+ return 0;
+}
+
+static int pfuze_init(void)
+{
+ struct pmic *p;
+ int ret;
+ unsigned int reg;
+
+ ret = power_pfuze100_init(I2C_PMIC);
+ if (ret)
+ return ret;
+
+ p = pmic_get("PFUZE100_PMIC");
+ ret = pmic_probe(p);
+ if (ret)
+ return ret;
+
+ pmic_reg_read(p, PFUZE100_DEVICEID, &reg);
+ printf("PMIC: PFUZE100 ID=0x%02x\n", reg);
+
+ /* Increase VGEN3 from 2.5 to 2.8V */
+ pmic_reg_read(p, PFUZE100_VGEN3VOL, &reg);
+ reg &= ~0xf;
+ reg |= 0xa;
+ pmic_reg_write(p, PFUZE100_VGEN3VOL, reg);
+
+ /* Increase VGEN5 from 2.8 to 3V */
+ pmic_reg_read(p, PFUZE100_VGEN5VOL, &reg);
+ reg &= ~0xf;
+ reg |= 0xc;
+ pmic_reg_write(p, PFUZE100_VGEN5VOL, reg);
+
+ /* Set SW1AB stanby volage to 0.975V */
+ pmic_reg_read(p, PFUZE100_SW1ABSTBY, &reg);
+ reg &= ~0x3f;
+ reg |= 0x1b;
+ pmic_reg_write(p, PFUZE100_SW1ABSTBY, reg);
+
+ /* Set SW1AB/VDDARM step ramp up time from 16us to 4us/25mV */
+ pmic_reg_read(p, PUZE_100_SW1ABCONF, &reg);
+ reg &= ~0xc0;
+ reg |= 0x40;
+ pmic_reg_write(p, PUZE_100_SW1ABCONF, reg);
+
+ /* Set SW1C standby voltage to 0.975V */
+ pmic_reg_read(p, PFUZE100_SW1CSTBY, &reg);
+ reg &= ~0x3f;
+ reg |= 0x1b;
+ pmic_reg_write(p, PFUZE100_SW1CSTBY, reg);
+
+ /* Set SW1C/VDDSOC step ramp up time from 16us to 4us/25mV */
+ pmic_reg_read(p, PFUZE100_SW1CCONF, &reg);
+ reg &= ~0xc0;
+ reg |= 0x40;
+ pmic_reg_write(p, PFUZE100_SW1CCONF, reg);
return 0;
}
@@ -446,6 +529,7 @@ int board_late_init(void)
#ifdef CONFIG_CMD_BMODE
add_board_boot_modes(board_boot_modes);
#endif
+ pfuze_init();
return 0;
}
diff --git a/board/freescale/vf610twr/vf610twr.c b/board/freescale/vf610twr/vf610twr.c
index d64d3aa872..54a9f2c7c3 100644
--- a/board/freescale/vf610twr/vf610twr.c
+++ b/board/freescale/vf610twr/vf610twr.c
@@ -278,6 +278,26 @@ static void setup_iomux_i2c(void)
imx_iomux_v3_setup_multiple_pads(i2c0_pads, ARRAY_SIZE(i2c0_pads));
}
+static void setup_iomux_qspi(void)
+{
+ static const iomux_v3_cfg_t qspi0_pads[] = {
+ VF610_PAD_PTD0__QSPI0_A_QSCK,
+ VF610_PAD_PTD1__QSPI0_A_CS0,
+ VF610_PAD_PTD2__QSPI0_A_DATA3,
+ VF610_PAD_PTD3__QSPI0_A_DATA2,
+ VF610_PAD_PTD4__QSPI0_A_DATA1,
+ VF610_PAD_PTD5__QSPI0_A_DATA0,
+ VF610_PAD_PTD7__QSPI0_B_QSCK,
+ VF610_PAD_PTD8__QSPI0_B_CS0,
+ VF610_PAD_PTD9__QSPI0_B_DATA3,
+ VF610_PAD_PTD10__QSPI0_B_DATA2,
+ VF610_PAD_PTD11__QSPI0_B_DATA1,
+ VF610_PAD_PTD12__QSPI0_B_DATA0,
+ };
+
+ imx_iomux_v3_setup_multiple_pads(qspi0_pads, ARRAY_SIZE(qspi0_pads));
+}
+
#ifdef CONFIG_FSL_ESDHC
struct fsl_esdhc_cfg esdhc_cfg[1] = {
{ESDHC1_BASE_ADDR},
@@ -321,7 +341,8 @@ static void clock_init(void)
clrsetbits_le32(&ccm->ccgr2, CCM_REG_CTRL_MASK,
CCM_CCGR2_IOMUXC_CTRL_MASK | CCM_CCGR2_PORTA_CTRL_MASK |
CCM_CCGR2_PORTB_CTRL_MASK | CCM_CCGR2_PORTC_CTRL_MASK |
- CCM_CCGR2_PORTD_CTRL_MASK | CCM_CCGR2_PORTE_CTRL_MASK);
+ CCM_CCGR2_PORTD_CTRL_MASK | CCM_CCGR2_PORTE_CTRL_MASK |
+ CCM_CCGR2_QSPI0_CTRL_MASK);
clrsetbits_le32(&ccm->ccgr3, CCM_REG_CTRL_MASK,
CCM_CCGR3_ANADIG_CTRL_MASK);
clrsetbits_le32(&ccm->ccgr4, CCM_REG_CTRL_MASK,
@@ -352,11 +373,14 @@ static void clock_init(void)
CCM_CACRR_IPG_CLK_DIV(1) | CCM_CACRR_BUS_CLK_DIV(2) |
CCM_CACRR_ARM_CLK_DIV(0));
clrsetbits_le32(&ccm->cscmr1, CCM_REG_CTRL_MASK,
- CCM_CSCMR1_ESDHC1_CLK_SEL(3));
+ CCM_CSCMR1_ESDHC1_CLK_SEL(3) | CCM_CSCMR1_QSPI0_CLK_SEL(3));
clrsetbits_le32(&ccm->cscdr1, CCM_REG_CTRL_MASK,
CCM_CSCDR1_RMII_CLK_EN);
clrsetbits_le32(&ccm->cscdr2, CCM_REG_CTRL_MASK,
CCM_CSCDR2_ESDHC1_EN | CCM_CSCDR2_ESDHC1_CLK_DIV(0));
+ clrsetbits_le32(&ccm->cscdr3, CCM_REG_CTRL_MASK,
+ CCM_CSCDR3_QSPI0_EN | CCM_CSCDR3_QSPI0_DIV(1) |
+ CCM_CSCDR3_QSPI0_X2_DIV(1) | CCM_CSCDR3_QSPI0_X4_DIV(3));
clrsetbits_le32(&ccm->cscmr2, CCM_REG_CTRL_MASK,
CCM_CSCMR2_RMII_CLK_SEL(0));
}
@@ -386,6 +410,7 @@ int board_early_init_f(void)
setup_iomux_uart();
setup_iomux_enet();
setup_iomux_i2c();
+ setup_iomux_qspi();
return 0;
}
generated by cgit (git 2.34.1) at 2025-01-31 05:58:05 +0000