2 files changed, 0 insertions, 100 deletions
diff --git a/board/gdsys/gdppc440etx/gdppc440etx.c b/board/gdsys/gdppc440etx/gdppc440etx.c
index 92f5d822f6..b93a420154 100644
--- a/board/gdsys/gdppc440etx/gdppc440etx.c
+++ b/board/gdsys/gdppc440etx/gdppc440etx.c
@@ -217,69 +217,6 @@ int pci_pre_init(struct pci_controller *hose)
 #endif	/* defined(CONFIG_PCI) */
 
 /*
- * pci_target_init
- *
- * The bootstrap configuration provides default settings for the pci
- * inbound map (PIM). But the bootstrap config choices are limited and
- * may not be sufficient for a given board.
- *
- */
-#if defined(CONFIG_PCI) && defined(CONFIG_SYS_PCI_TARGET_INIT)
-void pci_target_init(struct pci_controller *hose)
-{
-	/*
-	 * Set up Direct MMIO registers
-	 */
-
-	/*
-	 * PowerPC440 EP PCI Master configuration.
-	 * Map one 1Gig range of PLB/processor addresses to PCI memory space.
-	 *       PLB address 0xA0000000-0xDFFFFFFF
-	 *   ==> PCI address 0xA0000000-0xDFFFFFFF
-	 *   Use byte reversed out routines to handle endianess.
-	 * Make this region non-prefetchable.
-	 */
-	out32r(PCIL0_PMM0MA, 0x00000000); 	/* disabled b4 setting */
-	out32r(PCIL0_PMM0LA, CONFIG_SYS_PCI_MEMBASE);
-	out32r(PCIL0_PMM0PCILA, CONFIG_SYS_PCI_MEMBASE);
-	out32r(PCIL0_PMM0PCIHA, 0x00000000);
-	out32r(PCIL0_PMM0MA, 0xE0000001); /* 512M, no prefetch, enable region */
-
-	out32r(PCIL0_PMM1MA, 0x00000000);	/* disabled b4 setting */
-	out32r(PCIL0_PMM1LA, CONFIG_SYS_PCI_MEMBASE2);
-	out32r(PCIL0_PMM1PCILA, CONFIG_SYS_PCI_MEMBASE2);
-	out32r(PCIL0_PMM1PCIHA, 0x00000000);
-	out32r(PCIL0_PMM1MA, 0xE0000001); /* 512M, no prefetch, enable region */
-
-	out32r(PCIL0_PTM1MS, 0x00000001);
-	out32r(PCIL0_PTM1LA, 0);
-	out32r(PCIL0_PTM2MS, 0);
-	out32r(PCIL0_PTM2LA, 0);
-
-	/*
-	 * Set up Configuration registers
-	 */
-
-	/* Program the board's subsystem id/vendor id */
-	pci_write_config_word(0, PCI_SUBSYSTEM_VENDOR_ID,
-			      CONFIG_SYS_PCI_SUBSYS_VENDORID);
-	pci_write_config_word(0, PCI_SUBSYSTEM_ID, CONFIG_SYS_PCI_SUBSYS_ID);
-
-	/* Configure command register as bus master */
-	pci_write_config_word(0, PCI_COMMAND, PCI_COMMAND_MASTER);
-
-	/* 240nS PCI clock */
-	pci_write_config_word(0, PCI_LATENCY_TIMER, 1);
-
-	/* No error reporting */
-	pci_write_config_word(0, PCI_ERREN, 0);
-
-	pci_write_config_dword(0, PCI_BRDGOPT2, 0x00000101);
-
-}
-#endif	/* defined(CONFIG_PCI) && defined(CONFIG_SYS_PCI_TARGET_INIT) */
-
-/*
  *  pci_master_init
  *
  */
diff --git a/board/gdsys/intip/intip.c b/board/gdsys/intip/intip.c
index 49d2451358..23a10c41f9 100644
--- a/board/gdsys/intip/intip.c
+++ b/board/gdsys/intip/intip.c
@@ -141,43 +141,6 @@ int checkboard(void)
 	return 0;
 }
 
-/*
- *  pci_target_init
- *
- *	The bootstrap configuration provides default settings for the pci
- *	inbound map (PIM). But the bootstrap config choices are limited and
- *	may not be sufficient for a given board.
- */
-#if defined(CONFIG_PCI) && defined(CONFIG_SYS_PCI_TARGET_INIT)
-void pci_target_init(struct pci_controller *hose)
-{
-	/*
-	 * Disable everything
-	 */
-	out_le32((void *)PCIL0_PIM0SA, 0); /* disable */
-	out_le32((void *)PCIL0_PIM1SA, 0); /* disable */
-	out_le32((void *)PCIL0_PIM2SA, 0); /* disable */
-	out_le32((void *)PCIL0_EROMBA, 0); /* disable expansion rom */
-
-	/*
-	 * Map all of SDRAM to PCI address 0x0000_0000. Note that the 440
-	 * strapping options to not support sizes such as 128/256 MB.
-	 */
-	out_le32((void *)PCIL0_PIM0LAL, CONFIG_SYS_SDRAM_BASE);
-	out_le32((void *)PCIL0_PIM0LAH, 0);
-	out_le32((void *)PCIL0_PIM0SA, ~(gd->ram_size - 1) | 1);
-	out_le32((void *)PCIL0_BAR0, 0);
-
-	/*
-	 * Program the board's subsystem id/vendor id
-	 */
-	out_le16((void *)PCIL0_SBSYSVID, CONFIG_SYS_PCI_SUBSYS_VENDORID);
-	out_le16((void *)PCIL0_SBSYSID, CONFIG_SYS_PCI_SUBSYS_DEVICEID);
-
-	out_le16((void *)PCIL0_CMD, in16r(PCIL0_CMD) | PCI_COMMAND_MEMORY);
-}
-#endif	/* defined(CONFIG_PCI) && defined(CONFIG_SYS_PCI_TARGET_INIT) */
-
 int board_early_init_r(void)
 {
 	/*