diff options
Diffstat (limited to 'board/genesi/mx51_efikamx/imximage_mx.cfg')
| -rw-r--r-- | board/genesi/mx51_efikamx/imximage_mx.cfg | 132 |
1 files changed, 70 insertions, 62 deletions
diff --git a/board/genesi/mx51_efikamx/imximage_mx.cfg b/board/genesi/mx51_efikamx/imximage_mx.cfg index 38fa760e4b..21ff6d678e 100644 --- a/board/genesi/mx51_efikamx/imximage_mx.cfg +++ b/board/genesi/mx51_efikamx/imximage_mx.cfg @@ -1,52 +1,58 @@ -# -# Copyright (C) 2009 Pegatron Corporation -# Copyright (C) 2010 Marek Vasut <marek.vasut@gmail.com> -# Copyright (C) 2009-2012 Genesi USA, Inc. -# -# BASED ON: imx51evk -# -# (C) Copyright 2009 -# Stefano Babic DENX Software Engineering sbabic@denx.de. -# -# See file CREDITS for list of people who contributed to this -# project. -# -# This program is free software; you can redistribute it and/or -# modify it under the terms of the GNU General Public License as -# published by the Free Software Foundation; either version 2 of -# the License or (at your option) any later version. -# -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -# GNU General Public License for more details. -# -# You should have received a copy of the GNU General Public License -# along with this program; if not write to the Free Software -# Foundation Inc. 51 Franklin Street Fifth Floor Boston, -# MA 02110-1301 USA -# -# Refer docs/README.imxmage for more details about how-to configure -# and create imximage boot image -# -# The syntax is taken as close as possible with the kwbimage +/* + * Copyright (C) 2009 Pegatron Corporation + * Copyright (C) 2010 Marek Vasut <marek.vasut@gmail.com> + * Copyright (C) 2009-2012 Genesi USA, Inc. + * + * BASED ON: imx51evk + * + * (C) Copyright 2009 + * Stefano Babic DENX Software Engineering sbabic@denx.de. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not write to the Free Software + * Foundation Inc. 51 Franklin Street Fifth Floor Boston, + * MA 02110-1301 USA + * + * Refer docs/README.imxmage for more details about how-to configure + * and create imximage boot image + * + * The syntax is taken as close as possible with the kwbimage + */ -# Boot Device : one of -# spi, sd (the board has no nand neither onenand) +/* + * Boot Device : one of + * spi, sd (the board has no nand neither onenand) + */ BOOT_FROM spi -# Device Configuration Data (DCD) -# -# Each entry must have the format: -# Addr-type Address Value -# -# where: -# Addr-type register length (1,2 or 4 bytes) -# Address absolute address of the register -# value value to be stored in the register - -# Essential GPIO settings to be done as early as possible -# PCBIDn pad settings are all the defaults except #2 which needs HVE off +/* + * Device Configuration Data (DCD) + * + * Each entry must have the format: + * Addr-type Address Value + * + * where: + * Addr-type register length (1,2 or 4 bytes) + * Address absolute address of the register + * value value to be stored in the register + */ +/* + * Essential GPIO settings to be done as early as possible + * PCBIDn pad settings are all the defaults except #2 which needs HVE off + */ DATA 4 0x73fa8134 0x3 # PCBID0 ALT3 GPIO 3_16 DATA 4 0x73fa8130 0x3 # PCBID1 ALT3 GPIO 3_17 DATA 4 0x73fa8128 0x3 # PCBID2 ALT3 GPIO 3_11 @@ -55,7 +61,7 @@ DATA 4 0x73fa8198 0x3 # LED0 ALT3 GPIO 3_13 DATA 4 0x73fa81c4 0x3 # LED1 ALT3 GPIO 3_14 DATA 4 0x73fa81c8 0x3 # LED2 ALT3 GPIO 3_15 -# DDR bus IOMUX PAD settings +/* DDR bus IOMUX PAD settings */ DATA 4 0x73fa850c 0x20c5 # SDODT1 DATA 4 0x73fa8510 0x20c5 # SDODT0 DATA 4 0x73fa84ac 0xc5 # SDWE @@ -72,22 +78,24 @@ DATA 4 0x73fa84d8 0xc5 # DRAM_DQM1 DATA 4 0x73fa84dc 0xc5 # DRAM_DQM2 DATA 4 0x73fa84e0 0xc5 # DRAM_DQM3 -# Setting DDR for micron -# 13 Rows, 10 Cols, 32 bit, SREF=4 Micron Model -# CAS=3 BL=4 -# ESDCTL_ESDCTL0 +/* + * Setting DDR for micron + * 13 Rows, 10 Cols, 32 bit, SREF=4 Micron Model + * CAS=3 BL=4 + */ +/* ESDCTL_ESDCTL0 */ DATA 4 0x83fd9000 0x82a20000 -# ESDCTL_ESDCTL1 +/* ESDCTL_ESDCTL1 */ DATA 4 0x83fd9008 0x82a20000 -# ESDCTL_ESDMISC +/* ESDCTL_ESDMISC */ DATA 4 0x83fd9010 0xcaaaf6d0 -# ESDCTL_ESDCFG0 +/* ESDCTL_ESDCFG0 */ DATA 4 0x83fd9004 0x3f3574aa -# ESDCTL_ESDCFG1 +/* ESDCTL_ESDCFG1 */ DATA 4 0x83fd900c 0x3f3574aa -# Init DRAM on CS0 -# ESDCTL_ESDSCR +/* Init DRAM on CS0 */ +/* ESDCTL_ESDSCR */ DATA 4 0x83fd9014 0x04008008 DATA 4 0x83fd9014 0x0000801a DATA 4 0x83fd9014 0x0000801b @@ -101,7 +109,7 @@ DATA 4 0x83fd9014 0x03808019 DATA 4 0x83fd9014 0x00408019 DATA 4 0x83fd9014 0x00008000 -# Init DRAM on CS1 +/* Init DRAM on CS1 */ DATA 4 0x83fd9014 0x0400800c DATA 4 0x83fd9014 0x0000801e DATA 4 0x83fd9014 0x0000801f @@ -115,12 +123,12 @@ DATA 4 0x83fd9014 0x0380801d DATA 4 0x83fd9014 0x0040801d DATA 4 0x83fd9014 0x00008004 -# Write to CTL0 +/* Write to CTL0 */ DATA 4 0x83fd9000 0xb2a20000 -# Write to CTL1 +/* Write to CTL1 */ DATA 4 0x83fd9008 0xb2a20000 -# ESDMISC +/* ESDMISC */ DATA 4 0x83fd9010 0x000ad6d0 -#ESDCTL_ESDCDLYGD +/* ESDCTL_ESDCDLYGD */ DATA 4 0x83fd9034 0x90000000 DATA 4 0x83fd9014 0x00000000 |