1 files changed, 0 insertions, 141 deletions
diff --git a/board/htkw/mcx/mcx.c b/board/htkw/mcx/mcx.c
deleted file mode 100644
index ee29fe7cf9..0000000000
--- a/board/htkw/mcx/mcx.c
+++ /dev/null
@@ -1,141 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-/*
- * Copyright (C) 2011 Ilya Yanok, Emcraft Systems
- *
- * Based on ti/evm/evm.c
- */
-
-#include <common.h>
-#include <asm/io.h>
-#include <asm/arch/mem.h>
-#include <asm/arch/mmc_host_def.h>
-#include <asm/arch/mux.h>
-#include <asm/arch/sys_proto.h>
-#include <asm/mach-types.h>
-#include <asm/gpio.h>
-#include <asm/omap_gpio.h>
-#include <asm/arch/dss.h>
-#include <asm/arch/clock.h>
-#include <errno.h>
-#include <i2c.h>
-#ifdef CONFIG_USB_EHCI_HCD
-#include <usb.h>
-#include <asm/ehci-omap.h>
-#endif
-#include "mcx.h"
-
-DECLARE_GLOBAL_DATA_PTR;
-
-#define HOT_WATER_BUTTON	42
-#define LCD_OUTPUT		55
-
-/* Address of the framebuffer in RAM. */
-#define FB_START_ADDRESS 0x88000000
-
-#ifdef CONFIG_USB_EHCI_HCD
-static struct omap_usbhs_board_data usbhs_bdata = {
-	.port_mode[0] = OMAP_EHCI_PORT_MODE_PHY,
-	.port_mode[1] = OMAP_USBHS_PORT_MODE_UNUSED,
-	.port_mode[2] = OMAP_USBHS_PORT_MODE_UNUSED,
-};
-
-int ehci_hcd_init(int index, enum usb_init_type init,
-		struct ehci_hccr **hccr, struct ehci_hcor **hcor)
-{
-	return omap_ehci_hcd_init(index, &usbhs_bdata, hccr, hcor);
-}
-
-int ehci_hcd_stop(int index)
-{
-	return omap_ehci_hcd_stop();
-}
-#endif
-
-/*
- * Routine: board_init
- * Description: Early hardware init.
- */
-int board_init(void)
-{
-	gpmc_init(); /* in SRAM or SDRAM, finish GPMC */
-	/* boot param addr */
-	gd->bd->bi_boot_params = (OMAP34XX_SDRC_CS0 + 0x100);
-
-	gpio_direction_output(LCD_OUTPUT, 0);
-
-	return 0;
-}
-
-#ifdef CONFIG_BOARD_LATE_INIT
-int board_late_init(void)
-{
-	if (gpio_request(HOT_WATER_BUTTON, "hot-water-button") < 0) {
-		puts("Failed to get hot-water-button pin\n");
-		return -ENODEV;
-	}
-	gpio_direction_input(HOT_WATER_BUTTON);
-
-	/*
-	 * if hot-water-button is pressed
-	 * change bootcmd
-	 */
-	if (gpio_get_value(HOT_WATER_BUTTON))
-		return 0;
-
-	env_set("bootcmd", "run swupdate");
-
-	return 0;
-}
-#endif
-
-/*
- * Routine: set_muxconf_regs
- * Description: Setting up the configuration Mux registers specific to the
- *		hardware. Many pins need to be moved from protect to primary
- *		mode.
- */
-void set_muxconf_regs(void)
-{
-	MUX_MCX();
-}
-
-#if defined(CONFIG_MMC_OMAP_HS)
-int board_mmc_init(bd_t *bis)
-{
-	return omap_mmc_init(0, 0, 0, -1, -1);
-}
-#endif
-
-#if defined(CONFIG_VIDEO) && !defined(CONFIG_SPL_BUILD)
-
-static struct panel_config lcd_cfg = {
-	.timing_h       = PANEL_TIMING_H(40, 40, 48),
-	.timing_v       = PANEL_TIMING_V(29, 13, 3),
-	.pol_freq       = 0x00003000, /* Pol Freq */
-	.divisor        = 0x0001000E,
-	.panel_type     = 0x01, /* TFT */
-	.data_lines     = 0x03, /* 24 Bit RGB */
-	.load_mode      = 0x02, /* Frame Mode */
-	.panel_color	= 0,
-	.lcd_size	= PANEL_LCD_SIZE(800, 480),
-	.gfx_format	= GFXFORMAT_RGB24_UNPACKED,
-};
-
-int board_video_init(void)
-{
-	struct prcm *prcm_base = (struct prcm *)PRCM_BASE;
-	void *fb;
-
-	fb = (void *)FB_START_ADDRESS;
-
-	lcd_cfg.frame_buffer = fb;
-
-	setbits_le32(&prcm_base->fclken_dss, FCK_DSS_ON);
-	setbits_le32(&prcm_base->iclken_dss, ICK_DSS_ON);
-
-	omap3_dss_panel_config(&lcd_cfg);
-	omap3_dss_enable();
-
-	return 0;
-}
-#endif