diff options
Diffstat (limited to 'board/isee/igep0020/igep0020.c')
-rw-r--r-- | board/isee/igep0020/igep0020.c | 176 |
1 files changed, 0 insertions, 176 deletions
diff --git a/board/isee/igep0020/igep0020.c b/board/isee/igep0020/igep0020.c deleted file mode 100644 index a0f2aa3e4e..0000000000 --- a/board/isee/igep0020/igep0020.c +++ /dev/null @@ -1,176 +0,0 @@ -/* - * (C) Copyright 2010 - * ISEE 2007 SL, <www.iseebcn.com> - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ -#include <common.h> -#include <netdev.h> -#include <twl4030.h> -#include <asm/io.h> -#include <asm/gpio.h> -#include <asm/arch/mem.h> -#include <asm/arch/mmc_host_def.h> -#include <asm/arch/mux.h> -#include <asm/arch/sys_proto.h> -#include <asm/arch/omap_gpmc.h> -#include <asm/mach-types.h> -#include "igep0020.h" - -DECLARE_GLOBAL_DATA_PTR; - -/* GPMC definitions for LAN9221 chips */ -static const u32 gpmc_lan_config[] = { - NET_LAN9221_GPMC_CONFIG1, - NET_LAN9221_GPMC_CONFIG2, - NET_LAN9221_GPMC_CONFIG3, - NET_LAN9221_GPMC_CONFIG4, - NET_LAN9221_GPMC_CONFIG5, - NET_LAN9221_GPMC_CONFIG6, -}; - -/* - * Routine: board_init - * Description: Early hardware init. - */ -int board_init(void) -{ - gpmc_init(); /* in SRAM or SDRAM, finish GPMC */ - /* boot param addr */ - gd->bd->bi_boot_params = (OMAP34XX_SDRC_CS0 + 0x100); - - return 0; -} - -#ifdef CONFIG_SPL_BUILD -/* - * Routine: omap_rev_string - * Description: For SPL builds output board rev - */ -void omap_rev_string(void) -{ -} - -/* - * Routine: get_board_mem_timings - * Description: If we use SPL then there is no x-loader nor config header - * so we have to setup the DDR timings ourself on both banks. - */ -void get_board_mem_timings(struct board_sdrc_timings *timings) -{ - timings->mr = MICRON_V_MR_165; -#ifdef CONFIG_BOOT_NAND - timings->mcfg = MICRON_V_MCFG_200(256 << 20); - timings->ctrla = MICRON_V_ACTIMA_200; - timings->ctrlb = MICRON_V_ACTIMB_200; - timings->rfr_ctrl = SDP_3430_SDRC_RFR_CTRL_200MHz; -#else - if (get_cpu_family() == CPU_OMAP34XX) { - timings->mcfg = NUMONYX_V_MCFG_165(256 << 20); - timings->ctrla = NUMONYX_V_ACTIMA_165; - timings->ctrlb = NUMONYX_V_ACTIMB_165; - timings->rfr_ctrl = SDP_3430_SDRC_RFR_CTRL_165MHz; - - } else { - timings->mcfg = NUMONYX_V_MCFG_200(256 << 20); - timings->ctrla = NUMONYX_V_ACTIMA_200; - timings->ctrlb = NUMONYX_V_ACTIMB_200; - timings->rfr_ctrl = SDP_3430_SDRC_RFR_CTRL_200MHz; - } -#endif -} -#endif - -/* - * Routine: setup_net_chip - * Description: Setting up the configuration GPMC registers specific to the - * Ethernet hardware. - */ -#if defined(CONFIG_CMD_NET) -static void setup_net_chip(void) -{ - struct ctrl *ctrl_base = (struct ctrl *)OMAP34XX_CTRL_BASE; - - enable_gpmc_cs_config(gpmc_lan_config, &gpmc_cfg->cs[5], 0x2C000000, - GPMC_SIZE_16M); - - /* Enable off mode for NWE in PADCONF_GPMC_NWE register */ - writew(readw(&ctrl_base->gpmc_nwe) | 0x0E00, &ctrl_base->gpmc_nwe); - /* Enable off mode for NOE in PADCONF_GPMC_NADV_ALE register */ - writew(readw(&ctrl_base->gpmc_noe) | 0x0E00, &ctrl_base->gpmc_noe); - /* Enable off mode for ALE in PADCONF_GPMC_NADV_ALE register */ - writew(readw(&ctrl_base->gpmc_nadv_ale) | 0x0E00, - &ctrl_base->gpmc_nadv_ale); - - /* Make GPIO 64 as output pin and send a magic pulse through it */ - if (!gpio_request(64, "")) { - gpio_direction_output(64, 0); - gpio_set_value(64, 1); - udelay(1); - gpio_set_value(64, 0); - udelay(1); - gpio_set_value(64, 1); - } -} -#endif - -#if defined(CONFIG_GENERIC_MMC) && !defined(CONFIG_SPL_BUILD) -int board_mmc_init(bd_t *bis) -{ - omap_mmc_init(0, 0, 0); - return 0; -} -#endif - -/* - * Routine: misc_init_r - * Description: Configure board specific parts - */ -int misc_init_r(void) -{ - twl4030_power_init(); - -#if defined(CONFIG_CMD_NET) - setup_net_chip(); -#endif - - dieid_num_r(); - - return 0; -} - -/* - * Routine: set_muxconf_regs - * Description: Setting up the configuration Mux registers specific to the - * hardware. Many pins need to be moved from protect to primary - * mode. - */ -void set_muxconf_regs(void) -{ - MUX_DEFAULT(); -} - -int board_eth_init(bd_t *bis) -{ - int rc = 0; -#ifdef CONFIG_SMC911X - rc = smc911x_initialize(0, CONFIG_SMC911X_BASE); -#endif - return rc; -} |