1 files changed, 0 insertions, 208 deletions
diff --git a/board/lantec/lantec.c b/board/lantec/lantec.c
deleted file mode 100644
index 6d3486c48a..0000000000
--- a/board/lantec/lantec.c
+++ /dev/null
@@ -1,208 +0,0 @@
-/*
- * (C) Copyright 2000, 2001
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- * (C) Copyright 2001
- * Torsten Stevens, FHG IMS, stevens@ims.fhg.de
- * Bruno Achauer, Exet AG, bruno@exet-ag.de.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-/*
- * Derived from ../tqm8xx/tqm8xx.c
- */
-
-#include <common.h>
-#include <mpc8xx.h>
-
-/* ------------------------------------------------------------------------- */
-
-static long int dram_size (long int, long int *, long int);
-
-/* ------------------------------------------------------------------------- */
-
-#define	_NOT_USED_	0xFFFFFFFF
-
-const uint sdram_table[] = {
-	/*
-	 * Single Read. (Offset 0 in UPMA RAM)
-	 */
-	0x1f07fc04, 0xeeaefc04, 0x11adfc04, 0xefbbbc00,
-	0x1ff77c47,		/* last */
-	/*
-	 * SDRAM Initialization (offset 5 in UPMA RAM)
-	 *
-	 * This is no UPM entry point. The following definition uses
-	 * the remaining space to establish an initialization
-	 * sequence, which is executed by a RUN command.
-	 *
-	 */
-	0x1ff77c35, 0xefeabc34, 0x1fb57c35,	/* last */
-	/*
-	 * Burst Read. (Offset 8 in UPMA RAM)
-	 */
-	0x1f07fc04, 0xeeaefc04, 0x10adfc04, 0xf0affc00,
-	0xf0affc00, 0xf1affc00, 0xefbbbc00, 0x1ff77c47,	/* last */
-	_NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
-	_NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
-	/*
-	 * Single Write. (Offset 18 in UPMA RAM)
-	 */
-	0x1f27fc04, 0xeeaebc00, 0x01b93c04, 0x1ff77c47,	/* last */
-	_NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
-	/*
-	 * Burst Write. (Offset 20 in UPMA RAM)
-	 */
-	0x1f07fc04, 0xeeaebc00, 0x10ad7c00, 0xf0affc00,
-	0xf0affc00, 0xe1bbbc04, 0x1ff77c47,	/* last */
-	_NOT_USED_,
-	_NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
-	_NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
-	/*
-	 * Refresh  (Offset 30 in UPMA RAM)
-	 */
-	0x1ff5fc84, 0xfffffc04, 0xfffffc04, 0xfffffc04,
-	0xfffffc84, 0xfffffc07, 0xfffffc07,	/* last */
-	_NOT_USED_,
-	_NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
-	/*
-	 * Exception. (Offset 3c in UPMA RAM)
-	 */
-	0x7ffffc07,		/* last */
-	_NOT_USED_, _NOT_USED_, _NOT_USED_,
-};
-
-/* ------------------------------------------------------------------------- */
-
-
-/*
- * Check Board Identity:
- *
- * Test TQ ID string (TQM8xx...)
- * If present, check for "L" type (no second DRAM bank),
- * otherwise "L" type is assumed as default.
- *
- * Return 1 for "L" type, 0 else.
- */
-
-int checkboard (void)
-{
-	printf ("Board: Lantec special edition rev.%d\n", CONFIG_LANTEC);
-	return 0;
-}
-
-/* ------------------------------------------------------------------------- */
-
-phys_size_t initdram (int board_type)
-{
-	volatile immap_t *immap = (immap_t *) CONFIG_SYS_IMMR;
-	volatile memctl8xx_t *memctl = &immap->im_memctl;
-	long int size_b0;
-	int i;
-
-	/*
-	 * Configure UPMA for SDRAM
-	 */
-	upmconfig (UPMA, (uint *) sdram_table,
-		   sizeof (sdram_table) / sizeof (uint));
-
-	memctl->memc_mptpr = CONFIG_SYS_MPTPR_1BK_8K /* XXX CONFIG_SYS_MPTPR XXX */ ;
-
-	/* burst length=4, burst type=sequential, CAS latency=2 */
-	memctl->memc_mar = 0x00000088;
-
-	/*
-	 * Map controller bank 3 to the SDRAM bank at preliminary address.
-	 */
-	memctl->memc_or3 = CONFIG_SYS_OR3_PRELIM;
-	memctl->memc_br3 = CONFIG_SYS_BR3_PRELIM;
-
-	/* initialize memory address register */
-	memctl->memc_mamr = CONFIG_SYS_MAMR_8COL;	/* refresh not enabled yet */
-
-	/* mode initialization (offset 5) */
-	udelay (200);		/* 0x80006105 */
-	memctl->memc_mcr =
-		MCR_OP_RUN | MCR_MB_CS3 | MCR_MLCF (1) | MCR_MAD (0x05);
-
-	/* run 2 refresh sequence with 4-beat refresh burst (offset 0x30) */
-	udelay (1);		/* 0x80006130 */
-	memctl->memc_mcr =
-		MCR_OP_RUN | MCR_MB_CS3 | MCR_MLCF (1) | MCR_MAD (0x30);
-	udelay (1);		/* 0x80006130 */
-	memctl->memc_mcr =
-		MCR_OP_RUN | MCR_MB_CS3 | MCR_MLCF (1) | MCR_MAD (0x30);
-
-	udelay (1);		/* 0x80006106 */
-	memctl->memc_mcr =
-		MCR_OP_RUN | MCR_MB_CS3 | MCR_MLCF (1) | MCR_MAD (0x06);
-
-	memctl->memc_mamr |= MAMR_PTAE;	/* refresh enabled */
-
-	udelay (200);
-
-	/* Need at least 10 DRAM accesses to stabilize */
-	for (i = 0; i < 10; ++i) {
-		volatile unsigned long *addr =
-			(volatile unsigned long *) SDRAM_BASE3_PRELIM;
-		unsigned long val;
-
-		val = *(addr + i);
-		*(addr + i) = val;
-	}
-
-	/*
-	 * Check Bank 0 Memory Size for re-configuration
-	 */
-	size_b0 = dram_size (CONFIG_SYS_MAMR_8COL,
-			     (long *) SDRAM_BASE3_PRELIM, SDRAM_MAX_SIZE);
-
-	memctl->memc_mamr = CONFIG_SYS_MAMR_8COL | MAMR_PTAE;
-
-	/*
-	 * Final mapping:
-	 */
-
-	memctl->memc_or3 = ((-size_b0) & 0xFFFF0000) | CONFIG_SYS_OR_TIMING_SDRAM;
-	memctl->memc_br3 = (CONFIG_SYS_SDRAM_BASE & BR_BA_MSK) | BR_MS_UPMA | BR_V;
-	udelay (1000);
-
-	return (size_b0);
-}
-
-/* ------------------------------------------------------------------------- */
-
-/*
- * Check memory range for valid RAM. A simple memory test determines
- * the actually available RAM size between addresses `base' and
- * `base + maxsize'. Some (not all) hardware errors are detected:
- * - short between address lines
- * - short between data lines
- */
-
-static long int dram_size (long int mamr_value, long int *base,
-			   long int maxsize)
-{
-	volatile immap_t *immap = (immap_t *) CONFIG_SYS_IMMR;
-	volatile memctl8xx_t *memctl = &immap->im_memctl;
-
-	memctl->memc_mamr = mamr_value;
-
-	return (get_ram_size (base, maxsize));
-}