summaryrefslogtreecommitdiff
path: root/board/lwmon5/sdram.c
diff options
context:
space:
mode:
Diffstat (limited to 'board/lwmon5/sdram.c')
-rw-r--r--board/lwmon5/sdram.c662
1 files changed, 662 insertions, 0 deletions
diff --git a/board/lwmon5/sdram.c b/board/lwmon5/sdram.c
new file mode 100644
index 0000000000..9a4a8eea8f
--- /dev/null
+++ b/board/lwmon5/sdram.c
@@ -0,0 +1,662 @@
+/*
+ * (C) Copyright 2006
+ * Sylvie Gohl, AMCC/IBM, gohl.sylvie@fr.ibm.com
+ * Jacqueline Pira-Ferriol, AMCC/IBM, jpira-ferriol@fr.ibm.com
+ * Thierry Roman, AMCC/IBM, thierry_roman@fr.ibm.com
+ * Alain Saurel, AMCC/IBM, alain.saurel@fr.ibm.com
+ * Robert Snyder, AMCC/IBM, rob.snyder@fr.ibm.com
+ *
+ * (C) Copyright 2007
+ * Stefan Roese, DENX Software Engineering, sr@denx.de.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+/* define DEBUG for debugging output (obviously ;-)) */
+#if 0
+#define DEBUG
+#endif
+
+#include <common.h>
+#include <asm/processor.h>
+#include <asm/mmu.h>
+#include <asm/io.h>
+#include <ppc440.h>
+
+#include "sdram.h"
+
+/*
+ * This DDR2 setup code can dynamically setup the TLB entries for the DDR2 memory
+ * region. Right now the cache should still be disabled in U-Boot because of the
+ * EMAC driver, that need it's buffer descriptor to be located in non cached
+ * memory.
+ *
+ * If at some time this restriction doesn't apply anymore, just define
+ * CFG_ENABLE_SDRAM_CACHE in the board config file and this code should setup
+ * everything correctly.
+ */
+#ifdef CFG_ENABLE_SDRAM_CACHE
+#define MY_TLB_WORD2_I_ENABLE 0 /* enable caching on SDRAM */
+#else
+#define MY_TLB_WORD2_I_ENABLE TLB_WORD2_I_ENABLE /* disable caching on SDRAM */
+#endif
+
+void program_tlb(u32 phys_addr, u32 virt_addr, u32 size, u32 tlb_word2_i_value);
+void dcbz_area(u32 start_address, u32 num_bytes);
+void dflush(void);
+
+#ifdef CONFIG_ADD_RAM_INFO
+static u32 is_ecc_enabled(void)
+{
+ u32 val;
+
+ mfsdram(DDR0_22, val);
+ val &= DDR0_22_CTRL_RAW_MASK;
+ if (val)
+ return 1;
+ else
+ return 0;
+}
+
+void board_add_ram_info(int use_default)
+{
+ PPC440_SYS_INFO board_cfg;
+ u32 val;
+
+ if (is_ecc_enabled())
+ puts(" (ECC");
+ else
+ puts(" (ECC not");
+
+ get_sys_info(&board_cfg);
+ printf(" enabled, %d MHz", (board_cfg.freqPLB * 2) / 1000000);
+
+ mfsdram(DDR0_03, val);
+ val = DDR0_03_CASLAT_DECODE(val);
+ printf(", CL%d)", val);
+}
+#endif
+
+static int wait_for_dlllock(void)
+{
+ u32 val;
+ int wait = 0;
+
+ /*
+ * Wait for the DCC master delay line to finish calibration
+ */
+ mtdcr(ddrcfga, DDR0_17);
+ val = DDR0_17_DLLLOCKREG_UNLOCKED;
+
+ while (wait != 0xffff) {
+ val = mfdcr(ddrcfgd);
+ if ((val & DDR0_17_DLLLOCKREG_MASK) == DDR0_17_DLLLOCKREG_LOCKED)
+ /* dlllockreg bit on */
+ return 0;
+ else
+ wait++;
+ }
+ debug("0x%04x: DDR0_17 Value (dlllockreg bit): 0x%08x\n", wait, val);
+ debug("Waiting for dlllockreg bit to raise\n");
+
+ return -1;
+}
+
+#if defined(CONFIG_DDR_DATA_EYE)
+int wait_for_dram_init_complete(void)
+{
+ u32 val;
+ int wait = 0;
+
+ /*
+ * Wait for 'DRAM initialization complete' bit in status register
+ */
+ mtdcr(ddrcfga, DDR0_00);
+
+ while (wait != 0xffff) {
+ val = mfdcr(ddrcfgd);
+ if ((val & DDR0_00_INT_STATUS_BIT6) == DDR0_00_INT_STATUS_BIT6)
+ /* 'DRAM initialization complete' bit */
+ return 0;
+ else
+ wait++;
+ }
+
+ debug("DRAM initialization complete bit in status register did not rise\n");
+
+ return -1;
+}
+
+#define NUM_TRIES 64
+#define NUM_READS 10
+
+void denali_core_search_data_eye(u32 start_addr, u32 memory_size)
+{
+ int k, j;
+ u32 val;
+ u32 wr_dqs_shift, dqs_out_shift, dll_dqs_delay_X;
+ u32 max_passing_cases = 0, wr_dqs_shift_with_max_passing_cases = 0;
+ u32 passing_cases = 0, dll_dqs_delay_X_sw_val = 0;
+ u32 dll_dqs_delay_X_start_window = 0, dll_dqs_delay_X_end_window = 0;
+ volatile u32 *ram_pointer;
+ u32 test[NUM_TRIES] = {
+ 0x00000000, 0x00000000, 0xFFFFFFFF, 0xFFFFFFFF,
+ 0x00000000, 0x00000000, 0xFFFFFFFF, 0xFFFFFFFF,
+ 0xFFFFFFFF, 0xFFFFFFFF, 0x00000000, 0x00000000,
+ 0xFFFFFFFF, 0xFFFFFFFF, 0x00000000, 0x00000000,
+ 0xAAAAAAAA, 0xAAAAAAAA, 0x55555555, 0x55555555,
+ 0xAAAAAAAA, 0xAAAAAAAA, 0x55555555, 0x55555555,
+ 0x55555555, 0x55555555, 0xAAAAAAAA, 0xAAAAAAAA,
+ 0x55555555, 0x55555555, 0xAAAAAAAA, 0xAAAAAAAA,
+ 0xA5A5A5A5, 0xA5A5A5A5, 0x5A5A5A5A, 0x5A5A5A5A,
+ 0xA5A5A5A5, 0xA5A5A5A5, 0x5A5A5A5A, 0x5A5A5A5A,
+ 0x5A5A5A5A, 0x5A5A5A5A, 0xA5A5A5A5, 0xA5A5A5A5,
+ 0x5A5A5A5A, 0x5A5A5A5A, 0xA5A5A5A5, 0xA5A5A5A5,
+ 0xAA55AA55, 0xAA55AA55, 0x55AA55AA, 0x55AA55AA,
+ 0xAA55AA55, 0xAA55AA55, 0x55AA55AA, 0x55AA55AA,
+ 0x55AA55AA, 0x55AA55AA, 0xAA55AA55, 0xAA55AA55,
+ 0x55AA55AA, 0x55AA55AA, 0xAA55AA55, 0xAA55AA55 };
+
+ ram_pointer = (volatile u32 *)start_addr;
+
+ for (wr_dqs_shift = 64; wr_dqs_shift < 96; wr_dqs_shift++) {
+ /*for (wr_dqs_shift=1; wr_dqs_shift<96; wr_dqs_shift++) {*/
+
+ /*
+ * De-assert 'start' parameter.
+ */
+ mtdcr(ddrcfga, DDR0_02);
+ val = (mfdcr(ddrcfgd) & ~DDR0_02_START_MASK) | DDR0_02_START_OFF;
+ mtdcr(ddrcfgd, val);
+
+ /*
+ * Set 'wr_dqs_shift'
+ */
+ mtdcr(ddrcfga, DDR0_09);
+ val = (mfdcr(ddrcfgd) & ~DDR0_09_WR_DQS_SHIFT_MASK)
+ | DDR0_09_WR_DQS_SHIFT_ENCODE(wr_dqs_shift);
+ mtdcr(ddrcfgd, val);
+
+ /*
+ * Set 'dqs_out_shift' = wr_dqs_shift + 32
+ */
+ dqs_out_shift = wr_dqs_shift + 32;
+ mtdcr(ddrcfga, DDR0_22);
+ val = (mfdcr(ddrcfgd) & ~DDR0_22_DQS_OUT_SHIFT_MASK)
+ | DDR0_22_DQS_OUT_SHIFT_ENCODE(dqs_out_shift);
+ mtdcr(ddrcfgd, val);
+
+ passing_cases = 0;
+
+ for (dll_dqs_delay_X = 1; dll_dqs_delay_X < 64; dll_dqs_delay_X++) {
+ /*for (dll_dqs_delay_X=1; dll_dqs_delay_X<128; dll_dqs_delay_X++) {*/
+ /*
+ * Set 'dll_dqs_delay_X'.
+ */
+ /* dll_dqs_delay_0 */
+ mtdcr(ddrcfga, DDR0_17);
+ val = (mfdcr(ddrcfgd) & ~DDR0_17_DLL_DQS_DELAY_0_MASK)
+ | DDR0_17_DLL_DQS_DELAY_0_ENCODE(dll_dqs_delay_X);
+ mtdcr(ddrcfgd, val);
+ /* dll_dqs_delay_1 to dll_dqs_delay_4 */
+ mtdcr(ddrcfga, DDR0_18);
+ val = (mfdcr(ddrcfgd) & ~DDR0_18_DLL_DQS_DELAY_X_MASK)
+ | DDR0_18_DLL_DQS_DELAY_4_ENCODE(dll_dqs_delay_X)
+ | DDR0_18_DLL_DQS_DELAY_3_ENCODE(dll_dqs_delay_X)
+ | DDR0_18_DLL_DQS_DELAY_2_ENCODE(dll_dqs_delay_X)
+ | DDR0_18_DLL_DQS_DELAY_1_ENCODE(dll_dqs_delay_X);
+ mtdcr(ddrcfgd, val);
+ /* dll_dqs_delay_5 to dll_dqs_delay_8 */
+ mtdcr(ddrcfga, DDR0_19);
+ val = (mfdcr(ddrcfgd) & ~DDR0_19_DLL_DQS_DELAY_X_MASK)
+ | DDR0_19_DLL_DQS_DELAY_8_ENCODE(dll_dqs_delay_X)
+ | DDR0_19_DLL_DQS_DELAY_7_ENCODE(dll_dqs_delay_X)
+ | DDR0_19_DLL_DQS_DELAY_6_ENCODE(dll_dqs_delay_X)
+ | DDR0_19_DLL_DQS_DELAY_5_ENCODE(dll_dqs_delay_X);
+ mtdcr(ddrcfgd, val);
+
+ ppcMsync();
+ ppcMbar();
+
+ /*
+ * Assert 'start' parameter.
+ */
+ mtdcr(ddrcfga, DDR0_02);
+ val = (mfdcr(ddrcfgd) & ~DDR0_02_START_MASK) | DDR0_02_START_ON;
+ mtdcr(ddrcfgd, val);
+
+ ppcMsync();
+ ppcMbar();
+
+ /*
+ * Wait for the DCC master delay line to finish calibration
+ */
+ if (wait_for_dlllock() != 0) {
+ printf("dlllock did not occur !!!\n");
+ printf("denali_core_search_data_eye!!!\n");
+ printf("wr_dqs_shift = %d - dll_dqs_delay_X = %d\n",
+ wr_dqs_shift, dll_dqs_delay_X);
+ hang();
+ }
+ ppcMsync();
+ ppcMbar();
+
+ if (wait_for_dram_init_complete() != 0) {
+ printf("dram init complete did not occur !!!\n");
+ printf("denali_core_search_data_eye!!!\n");
+ printf("wr_dqs_shift = %d - dll_dqs_delay_X = %d\n",
+ wr_dqs_shift, dll_dqs_delay_X);
+ hang();
+ }
+ udelay(100); /* wait 100us to ensure init is really completed !!! */
+
+ /* write values */
+ for (j=0; j<NUM_TRIES; j++) {
+ ram_pointer[j] = test[j];
+
+ /* clear any cache at ram location */
+ __asm__("dcbf 0,%0": :"r" (&ram_pointer[j]));
+ }
+
+ /* read values back */
+ for (j=0; j<NUM_TRIES; j++) {
+ for (k=0; k<NUM_READS; k++) {
+ /* clear any cache at ram location */
+ __asm__("dcbf 0,%0": :"r" (&ram_pointer[j]));
+
+ if (ram_pointer[j] != test[j])
+ break;
+ }
+
+ /* read error */
+ if (k != NUM_READS)
+ break;
+ }
+
+ /* See if the dll_dqs_delay_X value passed.*/
+ if (j < NUM_TRIES) {
+ /* Failed */
+ passing_cases = 0;
+ /* break; */
+ } else {
+ /* Passed */
+ if (passing_cases == 0)
+ dll_dqs_delay_X_sw_val = dll_dqs_delay_X;
+ passing_cases++;
+ if (passing_cases >= max_passing_cases) {
+ max_passing_cases = passing_cases;
+ wr_dqs_shift_with_max_passing_cases = wr_dqs_shift;
+ dll_dqs_delay_X_start_window = dll_dqs_delay_X_sw_val;
+ dll_dqs_delay_X_end_window = dll_dqs_delay_X;
+ }
+ }
+
+ /*
+ * De-assert 'start' parameter.
+ */
+ mtdcr(ddrcfga, DDR0_02);
+ val = (mfdcr(ddrcfgd) & ~DDR0_02_START_MASK) | DDR0_02_START_OFF;
+ mtdcr(ddrcfgd, val);
+
+ } /* for (dll_dqs_delay_X=0; dll_dqs_delay_X<128; dll_dqs_delay_X++) */
+
+ } /* for (wr_dqs_shift=0; wr_dqs_shift<96; wr_dqs_shift++) */
+
+ /*
+ * Largest passing window is now detected.
+ */
+
+ /* Compute dll_dqs_delay_X value */
+ dll_dqs_delay_X = (dll_dqs_delay_X_end_window + dll_dqs_delay_X_start_window) / 2;
+ wr_dqs_shift = wr_dqs_shift_with_max_passing_cases;
+
+ debug("DQS calibration - Window detected:\n");
+ debug("max_passing_cases = %d\n", max_passing_cases);
+ debug("wr_dqs_shift = %d\n", wr_dqs_shift);
+ debug("dll_dqs_delay_X = %d\n", dll_dqs_delay_X);
+ debug("dll_dqs_delay_X window = %d - %d\n",
+ dll_dqs_delay_X_start_window, dll_dqs_delay_X_end_window);
+
+ /*
+ * De-assert 'start' parameter.
+ */
+ mtdcr(ddrcfga, DDR0_02);
+ val = (mfdcr(ddrcfgd) & ~DDR0_02_START_MASK) | DDR0_02_START_OFF;
+ mtdcr(ddrcfgd, val);
+
+ /*
+ * Set 'wr_dqs_shift'
+ */
+ mtdcr(ddrcfga, DDR0_09);
+ val = (mfdcr(ddrcfgd) & ~DDR0_09_WR_DQS_SHIFT_MASK)
+ | DDR0_09_WR_DQS_SHIFT_ENCODE(wr_dqs_shift);
+ mtdcr(ddrcfgd, val);
+ debug("DDR0_09=0x%08lx\n", val);
+
+ /*
+ * Set 'dqs_out_shift' = wr_dqs_shift + 32
+ */
+ dqs_out_shift = wr_dqs_shift + 32;
+ mtdcr(ddrcfga, DDR0_22);
+ val = (mfdcr(ddrcfgd) & ~DDR0_22_DQS_OUT_SHIFT_MASK)
+ | DDR0_22_DQS_OUT_SHIFT_ENCODE(dqs_out_shift);
+ mtdcr(ddrcfgd, val);
+ debug("DDR0_22=0x%08lx\n", val);
+
+ /*
+ * Set 'dll_dqs_delay_X'.
+ */
+ /* dll_dqs_delay_0 */
+ mtdcr(ddrcfga, DDR0_17);
+ val = (mfdcr(ddrcfgd) & ~DDR0_17_DLL_DQS_DELAY_0_MASK)
+ | DDR0_17_DLL_DQS_DELAY_0_ENCODE(dll_dqs_delay_X);
+ mtdcr(ddrcfgd, val);
+ debug("DDR0_17=0x%08lx\n", val);
+
+ /* dll_dqs_delay_1 to dll_dqs_delay_4 */
+ mtdcr(ddrcfga, DDR0_18);
+ val = (mfdcr(ddrcfgd) & ~DDR0_18_DLL_DQS_DELAY_X_MASK)
+ | DDR0_18_DLL_DQS_DELAY_4_ENCODE(dll_dqs_delay_X)
+ | DDR0_18_DLL_DQS_DELAY_3_ENCODE(dll_dqs_delay_X)
+ | DDR0_18_DLL_DQS_DELAY_2_ENCODE(dll_dqs_delay_X)
+ | DDR0_18_DLL_DQS_DELAY_1_ENCODE(dll_dqs_delay_X);
+ mtdcr(ddrcfgd, val);
+ debug("DDR0_18=0x%08lx\n", val);
+
+ /* dll_dqs_delay_5 to dll_dqs_delay_8 */
+ mtdcr(ddrcfga, DDR0_19);
+ val = (mfdcr(ddrcfgd) & ~DDR0_19_DLL_DQS_DELAY_X_MASK)
+ | DDR0_19_DLL_DQS_DELAY_8_ENCODE(dll_dqs_delay_X)
+ | DDR0_19_DLL_DQS_DELAY_7_ENCODE(dll_dqs_delay_X)
+ | DDR0_19_DLL_DQS_DELAY_6_ENCODE(dll_dqs_delay_X)
+ | DDR0_19_DLL_DQS_DELAY_5_ENCODE(dll_dqs_delay_X);
+ mtdcr(ddrcfgd, val);
+ debug("DDR0_19=0x%08lx\n", val);
+
+ /*
+ * Assert 'start' parameter.
+ */
+ mtdcr(ddrcfga, DDR0_02);
+ val = (mfdcr(ddrcfgd) & ~DDR0_02_START_MASK) | DDR0_02_START_ON;
+ mtdcr(ddrcfgd, val);
+
+ ppcMsync();
+ ppcMbar();
+
+ /*
+ * Wait for the DCC master delay line to finish calibration
+ */
+ if (wait_for_dlllock() != 0) {
+ printf("dlllock did not occur !!!\n");
+ hang();
+ }
+ ppcMsync();
+ ppcMbar();
+
+ if (wait_for_dram_init_complete() != 0) {
+ printf("dram init complete did not occur !!!\n");
+ hang();
+ }
+ udelay(100); /* wait 100us to ensure init is really completed !!! */
+}
+#endif /* CONFIG_DDR_DATA_EYE */
+
+#ifdef CONFIG_DDR_ECC
+static void wait_ddr_idle(void)
+{
+ /*
+ * Controller idle status cannot be determined for Denali
+ * DDR2 code. Just return here.
+ */
+}
+
+static void blank_string(int size)
+{
+ int i;
+
+ for (i=0; i<size; i++)
+ putc('\b');
+ for (i=0; i<size; i++)
+ putc(' ');
+ for (i=0; i<size; i++)
+ putc('\b');
+}
+
+static void program_ecc(u32 start_address,
+ u32 num_bytes,
+ u32 tlb_word2_i_value)
+{
+ u32 current_address;
+ u32 end_address;
+ u32 address_increment;
+ u32 val;
+ char str[] = "ECC generation -";
+ char slash[] = "\\|/-\\|/-";
+ int loop = 0;
+ int loopi = 0;
+
+ current_address = start_address;
+
+ sync();
+ eieio();
+ wait_ddr_idle();
+
+ if (tlb_word2_i_value == TLB_WORD2_I_ENABLE) {
+ /* ECC bit set method for non-cached memory */
+ address_increment = 4;
+ end_address = current_address + num_bytes;
+
+ puts(str);
+
+ while (current_address < end_address) {
+ *((u32 *)current_address) = 0x00000000;
+ current_address += address_increment;
+
+ if ((loop++ % (2 << 20)) == 0) {
+ putc('\b');
+ putc(slash[loopi++ % 8]);
+ }
+ }
+
+ blank_string(strlen(str));
+ } else {
+ /* ECC bit set method for cached memory */
+#if 1 /* test-only: will remove this define later, when ECC problems are solved! */
+ /*
+ * Some boards (like lwmon5) need to preserve the memory
+ * content upon ECC generation (for the log-buffer).
+ * Therefore we don't fill the memory with a pattern or
+ * just zero it, but write the same values back that are
+ * already in the memory cells.
+ */
+ address_increment = CFG_CACHELINE_SIZE;
+ end_address = current_address + num_bytes;
+
+ current_address = start_address;
+ while (current_address < end_address) {
+ ppcDcbi(current_address);
+ ppcDcbf(current_address);
+ current_address += CFG_CACHELINE_SIZE;
+ }
+#else
+ dcbz_area(start_address, num_bytes);
+ dflush();
+#endif
+ }
+
+ sync();
+ eieio();
+ wait_ddr_idle();
+
+ /* Clear error status */
+ mfsdram(DDR0_00, val);
+ mtsdram(DDR0_00, val | DDR0_00_INT_ACK_ALL);
+
+ /* Set 'int_mask' parameter to functionnal value */
+ mfsdram(DDR0_01, val);
+ mtsdram(DDR0_01, ((val &~ DDR0_01_INT_MASK_MASK) | DDR0_01_INT_MASK_ALL_OFF));
+
+ sync();
+ eieio();
+ wait_ddr_idle();
+}
+#endif
+
+static __inline__ u32 get_mcsr(void)
+{
+ u32 val;
+
+ asm volatile("mfspr %0, 0x23c" : "=r" (val) :);
+ return val;
+}
+
+static __inline__ void set_mcsr(u32 val)
+{
+ asm volatile("mtspr 0x23c, %0" : "=r" (val) :);
+}
+
+/*************************************************************************
+ *
+ * initdram -- 440EPx's DDR controller is a DENALI Core
+ *
+ ************************************************************************/
+long int initdram (int board_type)
+{
+ u32 val;
+
+#if 0 /* test-only: will remove this define later, when ECC problems are solved! */
+ /* CL=3 */
+ mtsdram(DDR0_02, 0x00000000);
+
+ mtsdram(DDR0_00, 0x0000190A);
+ mtsdram(DDR0_01, 0x01000000);
+ mtsdram(DDR0_03, 0x02030603); /* A suitable burst length was taken. CAS is right for our board */
+
+ mtsdram(DDR0_04, 0x0A030300);
+ mtsdram(DDR0_05, 0x02020308);
+ mtsdram(DDR0_06, 0x0103C812);
+ mtsdram(DDR0_07, 0x00090100);
+ mtsdram(DDR0_08, 0x02c80001);
+ mtsdram(DDR0_09, 0x00011D5F);
+ mtsdram(DDR0_10, 0x00000300);
+ mtsdram(DDR0_11, 0x000CC800);
+ mtsdram(DDR0_12, 0x00000003);
+ mtsdram(DDR0_14, 0x00000000);
+ mtsdram(DDR0_17, 0x1e000000);
+ mtsdram(DDR0_18, 0x1e1e1e1e);
+ mtsdram(DDR0_19, 0x1e1e1e1e);
+ mtsdram(DDR0_20, 0x0B0B0B0B);
+ mtsdram(DDR0_21, 0x0B0B0B0B);
+#ifdef CONFIG_DDR_ECC
+ mtsdram(DDR0_22, 0x00267F0B | DDR0_22_CTRL_RAW_ECC_ENABLE); /* enable ECC */
+#else
+ mtsdram(DDR0_22, 0x00267F0B);
+#endif
+
+ mtsdram(DDR0_23, 0x01000000);
+ mtsdram(DDR0_24, 0x01010001);
+
+ mtsdram(DDR0_26, 0x2D93028A);
+ mtsdram(DDR0_27, 0x0784682B);
+
+ mtsdram(DDR0_28, 0x00000080);
+ mtsdram(DDR0_31, 0x00000000);
+ mtsdram(DDR0_42, 0x01000006);
+
+ mtsdram(DDR0_43, 0x030A0200);
+ mtsdram(DDR0_44, 0x00000003);
+ mtsdram(DDR0_02, 0x00000001); /* Activate the denali core */
+#else
+ /* CL=4 */
+ mtsdram(DDR0_02, 0x00000000);
+
+ mtsdram(DDR0_00, 0x0000190A);
+ mtsdram(DDR0_01, 0x01000000);
+ mtsdram(DDR0_03, 0x02040803); /* A suitable burst length was taken. CAS is right for our board */
+
+ mtsdram(DDR0_04, 0x0B030300);
+ mtsdram(DDR0_05, 0x02020308);
+ mtsdram(DDR0_06, 0x0003C812);
+ mtsdram(DDR0_07, 0x00090100);
+ mtsdram(DDR0_08, 0x03c80001);
+ mtsdram(DDR0_09, 0x00011D5F);
+ mtsdram(DDR0_10, 0x00000300);
+ mtsdram(DDR0_11, 0x000CC800);
+ mtsdram(DDR0_12, 0x00000003);
+ mtsdram(DDR0_14, 0x00000000);
+ mtsdram(DDR0_17, 0x1e000000);
+ mtsdram(DDR0_18, 0x1e1e1e1e);
+ mtsdram(DDR0_19, 0x1e1e1e1e);
+ mtsdram(DDR0_20, 0x0B0B0B0B);
+ mtsdram(DDR0_21, 0x0B0B0B0B);
+#ifdef CONFIG_DDR_ECC
+ mtsdram(DDR0_22, 0x00267F0B | DDR0_22_CTRL_RAW_ECC_ENABLE); /* enable ECC */
+#else
+ mtsdram(DDR0_22, 0x00267F0B);
+#endif
+
+ mtsdram(DDR0_23, 0x01000000);
+ mtsdram(DDR0_24, 0x01010001);
+
+ mtsdram(DDR0_26, 0x2D93028A);
+ mtsdram(DDR0_27, 0x0784682B);
+
+ mtsdram(DDR0_28, 0x00000080);
+ mtsdram(DDR0_31, 0x00000000);
+ mtsdram(DDR0_42, 0x01000008);
+
+ mtsdram(DDR0_43, 0x050A0200);
+ mtsdram(DDR0_44, 0x00000005);
+ mtsdram(DDR0_02, 0x00000001); /* Activate the denali core */
+#endif
+
+ wait_for_dlllock();
+
+ /*
+ * Program tlb entries for this size (dynamic)
+ */
+ program_tlb(0, 0, CFG_MBYTES_SDRAM << 20, MY_TLB_WORD2_I_ENABLE);
+
+ /*
+ * Setup 2nd TLB with same physical address but different virtual address
+ * with cache enabled. This is done for fast ECC generation.
+ */
+ program_tlb(0, CFG_DDR_CACHED_ADDR, CFG_MBYTES_SDRAM << 20, 0);
+
+#ifdef CONFIG_DDR_DATA_EYE
+ /*
+ * Perform data eye search if requested.
+ */
+ denali_core_search_data_eye(CFG_DDR_CACHED_ADDR, CFG_MBYTES_SDRAM << 20);
+
+ /*
+ * Clear possible errors resulting from data-eye-search.
+ * If not done, then we could get an interrupt later on when
+ * exceptions are enabled.
+ */
+ val = get_mcsr();
+ set_mcsr(val);
+#endif
+
+#ifdef CONFIG_DDR_ECC
+ /*
+ * If ECC is enabled, initialize the parity bits.
+ */
+ program_ecc(CFG_DDR_CACHED_ADDR, CFG_MBYTES_SDRAM << 20, 0);
+#endif
+
+ return (CFG_MBYTES_SDRAM << 20);
+}
generated by cgit (git 2.34.1) at 2024-12-26 04:38:02 +0000