diff options
Diffstat (limited to 'board/matrix_vision/mergerbox/README')
| -rw-r--r-- | board/matrix_vision/mergerbox/README | 59 |
1 files changed, 0 insertions, 59 deletions
diff --git a/board/matrix_vision/mergerbox/README b/board/matrix_vision/mergerbox/README deleted file mode 100644 index 1994b65be1..0000000000 --- a/board/matrix_vision/mergerbox/README +++ /dev/null @@ -1,59 +0,0 @@ -Matrix Vision MergerBox ------------------------ - -1. Board Description - - The MergerBox is a 120x160mm single board computing platform - for 3D Full-HD digital video processing. - - Power Supply is 10-32VDC. - -2 System Components - -2.1 CPU - Freescale MPC8377 CPU running at 800MHz core and 333MHz csb. - 256 MByte DDR-II memory @ 333MHz data rate. - 64 MByte Nor Flash on local bus. - 1 GByte Nand Flash on FCM. - 1 Vitesse VSC8601 RGMII ethernet Phys. - 1 USB host controller over ULPI I/F with 4-Port hub. - 2 serial ports. Console running on ttyS0 @ 115200 8N1. - 1 mPCIe expansion slot (PCIe x1 + USB) used for Wifi/Bt. - 2 PCIe x1 busses on local mPCIe and cutom expansion connector. - 2 SATA host ports. - System configuration (HRCW) is taken from I2C EEPROM. - -2.2 Graphics - SM107 emebedded video controller driving a 5" 800x480 TFT panel. - Connected over 32-Bit/66MHz PCI utilizing 4 MByte embedded memory. - -2.3 FPGA - Altera Cyclone-IV EP4C115 with several PCI DMA engines. - Connects to 7x Gennum 3G-SDI transceivers as video interconnect - as well as a HDMI v1.4 compliant output for 3D monitoring. - Utilizes two more DDR-II controllers providing 256MB memory. - -2.4 I2C - Bus1: - AD7418 @ 0x50 for voltage/temp. monitoring. - SX8650 @ 0x90 touch controller for HMI. - EEPROM @ 0xA0 for system setup (HRCW etc.) + vendor specifics. - Bus2: - mPCIe SMBus - SiI9022A @ 0x72/0xC0 HDMI transmitter. - TCA6416A @ 0x40 + 0x42 16-Bit I/O expander. - LMH1983 @ 0xCA video PLL. - DS1338C @ 0xD0 real-time clock with embedded crystal. - 9FG104 @ 0xDC 4x 100MHz LVDS SerDes reference clock. - -3 Flash layout. - - reset vector is 0x00000100, i.e. low boot. - - 00000000 u-boot binary. - 00100000 FPGA raw bit file. - 00300000 FIT image holding kernel, dtb and rescue squashfs. - 03d00000 u-boot environment. - 03e00000 splash image - - mtd partitions are propagated to linux kernel via device tree blob. |