diff options
Diffstat (limited to 'board/mosaixtech/icon')
| -rw-r--r-- | board/mosaixtech/icon/Kconfig | 12 | ||||
| -rw-r--r-- | board/mosaixtech/icon/MAINTAINERS | 6 | ||||
| -rw-r--r-- | board/mosaixtech/icon/Makefile | 10 | ||||
| -rw-r--r-- | board/mosaixtech/icon/chip_config.c | 38 | ||||
| -rw-r--r-- | board/mosaixtech/icon/config.mk | 16 | ||||
| -rw-r--r-- | board/mosaixtech/icon/icon.c | 373 | ||||
| -rw-r--r-- | board/mosaixtech/icon/init.S | 73 |
7 files changed, 0 insertions, 528 deletions
diff --git a/board/mosaixtech/icon/Kconfig b/board/mosaixtech/icon/Kconfig deleted file mode 100644 index 3145a061c6..0000000000 --- a/board/mosaixtech/icon/Kconfig +++ /dev/null @@ -1,12 +0,0 @@ -if TARGET_ICON - -config SYS_BOARD - default "icon" - -config SYS_VENDOR - default "mosaixtech" - -config SYS_CONFIG_NAME - default "icon" - -endif diff --git a/board/mosaixtech/icon/MAINTAINERS b/board/mosaixtech/icon/MAINTAINERS deleted file mode 100644 index f3af072243..0000000000 --- a/board/mosaixtech/icon/MAINTAINERS +++ /dev/null @@ -1,6 +0,0 @@ -ICON BOARD -M: Stefan Roese <sr@denx.de> -S: Maintained -F: board/mosaixtech/icon/ -F: include/configs/icon.h -F: configs/icon_defconfig diff --git a/board/mosaixtech/icon/Makefile b/board/mosaixtech/icon/Makefile deleted file mode 100644 index d554a8bcb9..0000000000 --- a/board/mosaixtech/icon/Makefile +++ /dev/null @@ -1,10 +0,0 @@ -# -# (C) Copyright 2009-2010 -# Stefan Roese, DENX Software Engineering, sr@denx.de. -# -# SPDX-License-Identifier: GPL-2.0+ -# - -obj-y := icon.o -obj-$(CONFIG_CMD_CHIP_CONFIG) += chip_config.o -extra-y += init.o diff --git a/board/mosaixtech/icon/chip_config.c b/board/mosaixtech/icon/chip_config.c deleted file mode 100644 index 3c5706f81b..0000000000 --- a/board/mosaixtech/icon/chip_config.c +++ /dev/null @@ -1,38 +0,0 @@ -/* - * (C) Copyright 2009-2010 - * Stefan Roese, DENX Software Engineering, sr@denx.de. - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#include <common.h> -#include <asm/ppc4xx_config.h> - -struct ppc4xx_config ppc4xx_config_val[] = { - { - "400-133", "CPU: 400 PLB: 133 OPB: 66 EBC: 66", - { 0x86, 0x78, 0xc2, 0xc6, 0x05, 0xa5, 0x04, 0xe1 } - }, - { - "500-166", "CPU: 500 PLB: 166 OPB: 83 EBC: 83", - { 0x87, 0x78, 0xf2, 0xc6, 0x05, 0xa5, 0x04, 0xe1 } - }, - { - "533-133", "CPU: 533 PLB: 133 OPB: 66 EBC: 66", - { 0x87, 0x79, 0x02, 0x52, 0x05, 0xa5, 0x04, 0xe1 } - }, - { - "667-133", "CPU: 667 PLB: 133 OPB: 66 EBC: 66", - { 0x87, 0x79, 0x42, 0x56, 0x05, 0xa5, 0x04, 0xe1 } - }, - { - "667-166", "CPU: 667 PLB: 166 OPB: 83 EBC: 83", - { 0x87, 0x79, 0x42, 0x06, 0x05, 0xa5, 0x04, 0xe1 } - }, - { - "800-160", "CPU: 800 PLB: 160 OPB: 53 EBC: 17", - { 0x86, 0x79, 0x81, 0xa7, 0x07, 0xa5, 0x04, 0xe1 } - }, -}; - -int ppc4xx_config_count = ARRAY_SIZE(ppc4xx_config_val); diff --git a/board/mosaixtech/icon/config.mk b/board/mosaixtech/icon/config.mk deleted file mode 100644 index b689fd0677..0000000000 --- a/board/mosaixtech/icon/config.mk +++ /dev/null @@ -1,16 +0,0 @@ -# -# (C) Copyright 2009-2010 -# Stefan Roese, DENX Software Engineering, sr@denx.de. -# -# SPDX-License-Identifier: GPL-2.0+ -# - -PLATFORM_CPPFLAGS += -DCONFIG_440=1 - -ifeq ($(debug),1) -PLATFORM_CPPFLAGS += -DDEBUG -endif - -ifeq ($(dbcr),1) -PLATFORM_CPPFLAGS += -DCONFIG_SYS_INIT_DBCR=0x8cff0000 -endif diff --git a/board/mosaixtech/icon/icon.c b/board/mosaixtech/icon/icon.c deleted file mode 100644 index 7558234abf..0000000000 --- a/board/mosaixtech/icon/icon.c +++ /dev/null @@ -1,373 +0,0 @@ -/* - * (C) Copyright 2009-2010 - * Stefan Roese, DENX Software Engineering, sr@denx.de. - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#include <common.h> -#include <asm/ppc4xx.h> -#include <i2c.h> -#include <libfdt.h> -#include <fdt_support.h> -#include <netdev.h> -#include <video.h> -#include <asm/processor.h> -#include <asm/io.h> -#include <asm/ppc4xx-gpio.h> -#include <asm/4xx_pcie.h> -#include <linux/errno.h> -#include <asm/mmu.h> - -DECLARE_GLOBAL_DATA_PTR; - -int board_early_init_f(void) -{ - unsigned long mfr; - - /* - * Interrupt controller setup for the ICON 440SPe board. - * - *-------------------------------------------------------------------- - * IRQ | Source | Pol. | Sensi.| Crit. - *--------+-----------------------------------+-------+-------+------- - * IRQ 00 | UART0 | High | Level | Non - * IRQ 01 | UART1 | High | Level | Non - * IRQ 02 | IIC0 | High | Level | Non - * IRQ 03 | IIC1 | High | Level | Non - * IRQ 04 | PCI0X0 MSG IN | High | Level | Non - * IRQ 05 | PCI0X0 CMD Write | High | Level | Non - * IRQ 06 | PCI0X0 Power Mgt | High | Level | Non - * IRQ 07 | PCI0X0 VPD Access | Rising| Edge | Non - * IRQ 08 | PCI0X0 MSI level 0 | High | Lvl/ed| Non - * IRQ 09 | External IRQ 15 - (PCI-Express) | pgm H | Pgm | Non - * IRQ 10 | UIC2 Non-critical Int. | NA | NA | Non - * IRQ 11 | UIC2 Critical Interrupt | NA | NA | Crit - * IRQ 12 | PCI Express MSI Level 0 | Rising| Edge | Non - * IRQ 13 | PCI Express MSI Level 1 | Rising| Edge | Non - * IRQ 14 | PCI Express MSI Level 2 | Rising| Edge | Non - * IRQ 15 | PCI Express MSI Level 3 | Rising| Edge | Non - * IRQ 16 | UIC3 Non-critical Int. | NA | NA | Non - * IRQ 17 | UIC3 Critical Interrupt | NA | NA | Crit - * IRQ 18 | External IRQ 14 - (PCI-Express) | Pgm | Pgm | Non - * IRQ 19 | DMA Channel 0 FIFO Full | High | Level | Non - * IRQ 20 | DMA Channel 0 Stat FIFO | High | Level | Non - * IRQ 21 | DMA Channel 1 FIFO Full | High | Level | Non - * IRQ 22 | DMA Channel 1 Stat FIFO | High | Level | Non - * IRQ 23 | I2O Inbound Doorbell | High | Level | Non - * IRQ 24 | Inbound Post List FIFO Not Empt | High | Level | Non - * IRQ 25 | I2O Region 0 LL PLB Write | High | Level | Non - * IRQ 26 | I2O Region 1 LL PLB Write | High | Level | Non - * IRQ 27 | I2O Region 0 HB PLB Write | High | Level | Non - * IRQ 28 | I2O Region 1 HB PLB Write | High | Level | Non - * IRQ 29 | GPT Down Count Timer | Rising| Edge | Non - * IRQ 30 | UIC1 Non-critical Int. | NA | NA | Non - * IRQ 31 | UIC1 Critical Interrupt | NA | NA | Crit. - *-------------------------------------------------------------------- - * IRQ 32 | Ext. IRQ 13 - (PCI-Express) |pgm (H)|pgm/Lvl| Non - * IRQ 33 | MAL Serr | High | Level | Non - * IRQ 34 | MAL Txde | High | Level | Non - * IRQ 35 | MAL Rxde | High | Level | Non - * IRQ 36 | DMC CE or DMC UE | High | Level | Non - * IRQ 37 | EBC or UART2 | High |Lvl Edg| Non - * IRQ 38 | MAL TX EOB | High | Level | Non - * IRQ 39 | MAL RX EOB | High | Level | Non - * IRQ 40 | PCIX0 MSI Level 1 | High |Lvl Edg| Non - * IRQ 41 | PCIX0 MSI level 2 | High |Lvl Edg| Non - * IRQ 42 | PCIX0 MSI level 3 | High |Lvl Edg| Non - * IRQ 43 | L2 Cache | Risin | Edge | Non - * IRQ 44 | GPT Compare Timer 0 | Risin | Edge | Non - * IRQ 45 | GPT Compare Timer 1 | Risin | Edge | Non - * IRQ 46 | GPT Compare Timer 2 | Risin | Edge | Non - * IRQ 47 | GPT Compare Timer 3 | Risin | Edge | Non - * IRQ 48 | GPT Compare Timer 4 | Risin | Edge | Non - * IRQ 49 | Ext. IRQ 12 - PCI-X |pgm/Fal|pgm/Lvl| Non - * IRQ 50 | Ext. IRQ 11 - |pgm (H)|pgm/Lvl| Non - * IRQ 51 | Ext. IRQ 10 - |pgm (H)|pgm/Lvl| Non - * IRQ 52 | Ext. IRQ 9 |pgm (H)|pgm/Lvl| Non - * IRQ 53 | Ext. IRQ 8 |pgm (H)|pgm/Lvl| Non - * IRQ 54 | DMA Error | High | Level | Non - * IRQ 55 | DMA I2O Error | High | Level | Non - * IRQ 56 | Serial ROM | High | Level | Non - * IRQ 57 | PCIX0 Error | High | Edge | Non - * IRQ 58 | Ext. IRQ 7- |pgm (H)|pgm/Lvl| Non - * IRQ 59 | Ext. IRQ 6- |pgm (H)|pgm/Lvl| Non - * IRQ 60 | EMAC0 Interrupt | High | Level | Non - * IRQ 61 | EMAC0 Wake-up | High | Level | Non - * IRQ 62 | Reserved | High | Level | Non - * IRQ 63 | XOR | High | Level | Non - *-------------------------------------------------------------------- - * IRQ 64 | PE0 AL | High | Level | Non - * IRQ 65 | PE0 VPD Access | Risin | Edge | Non - * IRQ 66 | PE0 Hot Reset Request | Risin | Edge | Non - * IRQ 67 | PE0 Hot Reset Request | Falli | Edge | Non - * IRQ 68 | PE0 TCR | High | Level | Non - * IRQ 69 | PE0 BusMaster VCO | Falli | Edge | Non - * IRQ 70 | PE0 DCR Error | High | Level | Non - * IRQ 71 | Reserved | N/A | N/A | Non - * IRQ 72 | PE1 AL | High | Level | Non - * IRQ 73 | PE1 VPD Access | Risin | Edge | Non - * IRQ 74 | PE1 Hot Reset Request | Risin | Edge | Non - * IRQ 75 | PE1 Hot Reset Request | Falli | Edge | Non - * IRQ 76 | PE1 TCR | High | Level | Non - * IRQ 77 | PE1 BusMaster VCO | Falli | Edge | Non - * IRQ 78 | PE1 DCR Error | High | Level | Non - * IRQ 79 | Reserved | N/A | N/A | Non - * IRQ 80 | PE2 AL | High | Level | Non - * IRQ 81 | PE2 VPD Access | Risin | Edge | Non - * IRQ 82 | PE2 Hot Reset Request | Risin | Edge | Non - * IRQ 83 | PE2 Hot Reset Request | Falli | Edge | Non - * IRQ 84 | PE2 TCR | High | Level | Non - * IRQ 85 | PE2 BusMaster VCO | Falli | Edge | Non - * IRQ 86 | PE2 DCR Error | High | Level | Non - * IRQ 87 | Reserved | N/A | N/A | Non - * IRQ 88 | External IRQ(5) | Progr | Progr | Non - * IRQ 89 | External IRQ 4 - Ethernet | Progr | Progr | Non - * IRQ 90 | External IRQ 3 - PCI-X | Progr | Progr | Non - * IRQ 91 | External IRQ 2 - PCI-X | Progr | Progr | Non - * IRQ 92 | External IRQ 1 - PCI-X | Progr | Progr | Non - * IRQ 93 | External IRQ 0 - PCI-X | Progr | Progr | Non - * IRQ 94 | Reserved | N/A | N/A | Non - * IRQ 95 | Reserved | N/A | N/A | Non - *-------------------------------------------------------------------- - * IRQ 96 | PE0 INTA | High | Level | Non - * IRQ 97 | PE0 INTB | High | Level | Non - * IRQ 98 | PE0 INTC | High | Level | Non - * IRQ 99 | PE0 INTD | High | Level | Non - * IRQ 100| PE1 INTA | High | Level | Non - * IRQ 101| PE1 INTB | High | Level | Non - * IRQ 102| PE1 INTC | High | Level | Non - * IRQ 103| PE1 INTD | High | Level | Non - * IRQ 104| PE2 INTA | High | Level | Non - * IRQ 105| PE2 INTB | High | Level | Non - * IRQ 106| PE2 INTC | High | Level | Non - * IRQ 107| PE2 INTD | Risin | Edge | Non - * IRQ 108| PCI Express MSI Level 4 | Risin | Edge | Non - * IRQ 109| PCI Express MSI Level 5 | Risin | Edge | Non - * IRQ 110| PCI Express MSI Level 6 | Risin | Edge | Non - * IRQ 111| PCI Express MSI Level 7 | Risin | Edge | Non - * IRQ 116| PCI Express MSI Level 12 | Risin | Edge | Non - * IRQ 112| PCI Express MSI Level 8 | Risin | Edge | Non - * IRQ 113| PCI Express MSI Level 9 | Risin | Edge | Non - * IRQ 114| PCI Express MSI Level 10 | Risin | Edge | Non - * IRQ 115| PCI Express MSI Level 11 | Risin | Edge | Non - * IRQ 117| PCI Express MSI Level 13 | Risin | Edge | Non - * IRQ 118| PCI Express MSI Level 14 | Risin | Edge | Non - * IRQ 119| PCI Express MSI Level 15 | Risin | Edge | Non - * IRQ 120| PCI Express MSI Level 16 | Risin | Edge | Non - * IRQ 121| PCI Express MSI Level 17 | Risin | Edge | Non - * IRQ 122| PCI Express MSI Level 18 | Risin | Edge | Non - * IRQ 123| PCI Express MSI Level 19 | Risin | Edge | Non - * IRQ 124| PCI Express MSI Level 20 | Risin | Edge | Non - * IRQ 125| PCI Express MSI Level 21 | Risin | Edge | Non - * IRQ 126| PCI Express MSI Level 22 | Risin | Edge | Non - * IRQ 127| PCI Express MSI Level 23 | Risin | Edge | Non - */ - - /* - * Put UICs in PowerPC 440SPe mode. - * Initialise UIC registers. Clear all interrupts. Disable all - * interrupts. Set critical interrupt values. Set interrupt polarities. - * Set interrupt trigger levels. Make bit 0 High priority. Clear all - * interrupts again. - */ - mtdcr(UIC3SR, 0xffffffff); /* Clear all interrupts */ - mtdcr(UIC3ER, 0x00000000); /* disable all interrupts */ - mtdcr(UIC3CR, 0x00000000); /* Set Critical / Non Critical IRQs */ - mtdcr(UIC3PR, 0xffffffff); /* Set Interrupt Polarities*/ - mtdcr(UIC3TR, 0x001fffff); /* Set Interrupt Trigger Levels */ - mtdcr(UIC3VR, 0x00000001); /* Set Vect base=0,INT31 Highest prio */ - mtdcr(UIC3SR, 0x00000000); /* clear all interrupts*/ - mtdcr(UIC3SR, 0xffffffff); /* clear all interrupts*/ - - mtdcr(UIC2SR, 0xffffffff); /* Clear all interrupts */ - mtdcr(UIC2ER, 0x00000000); /* disable all interrupts*/ - mtdcr(UIC2CR, 0x00000000); /* Set Critical / Non Critical IRQs */ - mtdcr(UIC2PR, 0xebebebff); /* Set Interrupt Polarities*/ - mtdcr(UIC2TR, 0x74747400); /* Set Interrupt Trigger Levels */ - mtdcr(UIC2VR, 0x00000001); /* Set Vect base=0,INT31 Highest prio */ - mtdcr(UIC2SR, 0x00000000); /* clear all interrupts */ - mtdcr(UIC2SR, 0xffffffff); /* clear all interrupts */ - - mtdcr(UIC1SR, 0xffffffff); /* Clear all interrupts*/ - mtdcr(UIC1ER, 0x00000000); /* disable all interrupts*/ - mtdcr(UIC1CR, 0x00000000); /* Set Critical / Non Critical IRQs */ - mtdcr(UIC1PR, 0xffffffff); /* Set Interrupt Polarities */ - mtdcr(UIC1TR, 0x001f8040); /* Set Interrupt Trigger Levels*/ - mtdcr(UIC1VR, 0x00000001); /* Set Vect base=0,INT31 Highest prio */ - mtdcr(UIC1SR, 0x00000000); /* clear all interrupts*/ - mtdcr(UIC1SR, 0xffffffff); /* clear all interrupts*/ - - mtdcr(UIC0SR, 0xffffffff); /* Clear all interrupts */ - mtdcr(UIC0ER, 0x00000000); /* disable all int. excepted cascade */ - mtdcr(UIC0CR, 0x00104001); /* Set Critical / Non Critical IRQs */ - mtdcr(UIC0PR, 0xffffffff); /* Set Interrupt Polarities*/ - mtdcr(UIC0TR, 0x010f0004); /* Set Interrupt Trigger Levels */ - mtdcr(UIC0VR, 0x00000001); /* Set Vect base=0,INT31 Highest prio */ - mtdcr(UIC0SR, 0x00000000); /* clear all interrupts*/ - mtdcr(UIC0SR, 0xffffffff); /* clear all interrupts*/ - - mfsdr(SDR0_MFR, mfr); - mfr |= SDR0_MFR_FIXD; /* Workaround for PCI/DMA */ - mtsdr(SDR0_MFR, mfr); - - mtsdr(SDR0_PFC0, CONFIG_SYS_PFC0); - - out_be32((void *)GPIO0_OR, CONFIG_SYS_GPIO_OR); - out_be32((void *)GPIO0_ODR, CONFIG_SYS_GPIO_ODR); - out_be32((void *)GPIO0_TCR, CONFIG_SYS_GPIO_TCR); - - return 0; -} - -int board_early_init_r(void) -{ - /* - * ICON has 64MBytes of NOR FLASH (Spansion 29GL512), but the - * boot EBC mapping only supports a maximum of 16MBytes - * (4.ff00.0000 - 4.ffff.ffff). - * To solve this problem, the FLASH has to get remapped to another - * EBC address which accepts bigger regions: - * - * 0xfc00.0000 -> 4.ec00.0000 - */ - - /* Remap the NOR FLASH to 0xec00.0000 ... 0xefff.ffff */ - mtebc(PB0CR, CONFIG_SYS_FLASH_BASE_PHYS_L | 0xda000); - - /* Remove TLB entry of boot EBC mapping */ - remove_tlb(CONFIG_SYS_BOOT_BASE_ADDR, 16 << 20); - - /* Add TLB entry for 0xfc00.0000 -> 0x4.ec00.0000 */ - program_tlb(CONFIG_SYS_FLASH_BASE_PHYS, CONFIG_SYS_FLASH_BASE, - CONFIG_SYS_FLASH_SIZE, TLB_WORD2_I_ENABLE); - - /* - * Now accessing of the whole 64Mbytes of NOR FLASH at virtual address - * 0xfc00.0000 is possible - */ - - /* - * Clear potential errors resulting from auto-calibration. - * If not done, then we could get an interrupt later on when - * exceptions are enabled. - */ - set_mcsr(get_mcsr()); - - return 0; -} - -int checkboard(void) -{ - char buf[64]; - int i = getenv_f("serial#", buf, sizeof(buf)); - - printf("Board: ICON"); - if (i > 0) { - puts(", serial# "); - puts(buf); - } - putc('\n'); - - return 0; -} - -/* - * Override the default functions in cpu/ppc4xx/44x_spd_ddr2.c with - * board specific values. - * - * Tested successfully with the following SODIMM: - * Crucial CT6464AC667.4FE - 512MB SO-DIMM (single rank) - * - * Tests with Micron MT4HTF6464HZ-667H1 showed problems in "cold" state, - * directly after power-up. Only after running for more than 10 minutes - * real stable auto-calibration windows could be found. - */ -u32 ddr_wrdtr(u32 default_val) -{ - return SDRAM_WRDTR_LLWP_1_CYC | SDRAM_WRDTR_WTR_90_DEG_ADV; -} - -u32 ddr_clktr(u32 default_val) -{ - return SDRAM_CLKTR_CLKP_180_DEG_ADV; -} - -/* - * Override the weak default implementation and return the - * last PCIe slot number (max number - 1). - */ -int board_pcie_last(void) -{ - /* Only 2 PCIe ports used on ICON, so the last one is 1 */ - return 1; -} - -/* - * Video - */ -#ifdef CONFIG_VIDEO_SM501 -#include <sm501.h> - -#define DISPLAY_WIDTH 640 -#define DISPLAY_HEIGHT 480 - -static const SMI_REGS sm502_init_regs[] = { - {0x00004, 0x0}, - {0x00040, 0x00021847}, - {0x00044, 0x091a0a01}, /* 24 MHz pixclk */ - {0x00054, 0x0}, - {0x00048, 0x00021847}, - {0x0004C, 0x091a0a01}, - {0x00054, 0x1}, - {0x80004, 0xc428bb17}, - {0x8000C, 0x00000000}, - {0x80010, 0x0a000a00}, - {0x80014, 0x02800000}, - {0x80018, 0x01e00000}, - {0x8001C, 0x00000000}, - {0x80020, 0x01e00280}, - {0x80024, 0x02fa027f}, - {0x80028, 0x004a0280}, - {0x8002C, 0x020c01df}, - {0x80030, 0x000201e7}, - {0x80200, 0x00010000}, - {0x00008, 0x20000000}, /* gpio29 is pwm0, LED_PWM */ - {0x0000C, 0x3f000000}, /* gpio56 - gpio61 as flat panel data pins */ - {0x10020, 0x25725728}, /* 20 kHz pwm0, 50 % duty cycle, disabled */ - {0x80000, 0x0f010106}, /* vsync & hsync pos, disp on */ - {0, 0} -}; - -/* - * Return a pointer to the register initialization table. - */ -const SMI_REGS *board_get_regs(void) -{ - return sm502_init_regs; -} - -int board_get_width(void) -{ - return DISPLAY_WIDTH; -} - -int board_get_height(void) -{ - return DISPLAY_HEIGHT; -} - -#ifdef CONFIG_CONSOLE_EXTRA_INFO -/* - * Return text to be printed besides the logo. - */ -void video_get_info_str(int line_number, char *info) -{ - if (line_number == 1) - strcpy(info, " Board: ICON"); - else - info[0] = '\0'; -} -#endif - -#endif /* CONFIG_VIDEO_SM501 */ diff --git a/board/mosaixtech/icon/init.S b/board/mosaixtech/icon/init.S deleted file mode 100644 index c28a3a38a1..0000000000 --- a/board/mosaixtech/icon/init.S +++ /dev/null @@ -1,73 +0,0 @@ -/* - * (C) Copyright 2009-2010 - * Stefan Roese, DENX Software Engineering, sr@denx.de. - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#include <ppc_asm.tmpl> -#include <config.h> -#include <asm/mmu.h> -#include <asm/ppc4xx.h> - -/* - * TLB TABLE - * - * This table is used by the cpu boot code to setup the initial tlb - * entries. Rather than make broad assumptions in the cpu source tree, - * this table lets each board set things up however they like. - * - * Pointer to the table is returned in r1 - * - */ - - .section .bootpg,"ax" - - .globl tlbtab -tlbtab: - tlbtab_start - - /* - * BOOT_CS (FLASH) must be first. Before relocation SA_I can be off to - * use the speed up boot process. It is patched after relocation to - * enable SA_I. - */ - tlbentry(CONFIG_SYS_BOOT_BASE_ADDR, SZ_16M, CONFIG_SYS_BOOT_BASE_ADDR, - 4, AC_RWX | SA_G) /* TLB 0 */ - - /* - * TLB entries for SDRAM are not needed on this platform. - * They are dynamically generated in the SPD DDR(2) detection - * routine. - */ - - tlbentry(CONFIG_SYS_ISRAM_BASE, SZ_256K, 0x00000000, 4, - AC_RWX | SA_I) - - tlbentry(CONFIG_SYS_PERIPHERAL_BASE, SZ_4K, 0xF0000000, 4, - AC_RW | SA_IG) - - tlbentry(CONFIG_SYS_ACE_BASE, SZ_1K, - CONFIG_SYS_ACE_BASE_PHYS_L, CONFIG_SYS_ACE_BASE_PHYS_H, - AC_RW | SA_IG) - - tlbentry(CONFIG_SYS_PCI_BASE, SZ_256M, 0x00000000, 0xC, - AC_RW | SA_IG) - tlbentry(CONFIG_SYS_PCI_MEMBASE, SZ_256M, 0x10000000, 0xC, - AC_RW | SA_IG) - tlbentry(CONFIG_SYS_PCIE_MEMBASE, SZ_256M, 0xB0000000, 0xD, - AC_RW | SA_IG) - - tlbentry(CONFIG_SYS_PCIE0_CFGBASE, SZ_16M, 0x00000000, 0xD, - AC_RW | SA_IG) - tlbentry(CONFIG_SYS_PCIE1_CFGBASE, SZ_16M, 0x20000000, 0xD, - AC_RW | SA_IG) - tlbentry(CONFIG_SYS_PCIE2_CFGBASE, SZ_16M, 0x40000000, 0xD, - AC_RW | SA_IG) - tlbentry(CONFIG_SYS_PCIE0_XCFGBASE, SZ_1K, 0x10000000, 0xD, - AC_RW | SA_IG) - tlbentry(CONFIG_SYS_PCIE1_XCFGBASE, SZ_1K, 0x30000000, 0xD, - AC_RW | SA_IG) - tlbentry(CONFIG_SYS_PCIE2_XCFGBASE, SZ_1K, 0x50000000, 0xD, - AC_RW | SA_IG) - tlbtab_end |