1 files changed, 0 insertions, 106 deletions
diff --git a/board/netstal/hcu5/init.S b/board/netstal/hcu5/init.S
deleted file mode 100644
index 45e63dd3d4..0000000000
--- a/board/netstal/hcu5/init.S
+++ /dev/null
@@ -1,106 +0,0 @@
-/*
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <ppc_asm.tmpl>
-#include <config.h>
-#include <asm/mmu.h>
-
-/**************************************************************************
- * TLB TABLE
- *
- * This table is used by the cpu boot code to setup the initial tlb
- * entries. Rather than make broad assumptions in the cpu source tree,
- * this table lets each board set things up however they like.
- *
- *  Pointer to the table is returned in r1
- *
- *************************************************************************/
-	.section .bootpg,"ax"
-	.globl tlbtab
-
-tlbtab:
-	tlbtab_start
-
-	/* TLB#0: vxWorks needs this entry for the Machine Check interrupt, */
-	tlbentry( 0x40000000, SZ_256M, 0, 0, AC_RWX | SA_IG )
-	/* TLB#1: TLB-entry for DDR SDRAM (Up to 2GB) */
-	tlbentry( CONFIG_SYS_SDRAM_BASE, SZ_256M, CONFIG_SYS_SDRAM_BASE, 0,
-		AC_RWX | SA_IG )
-
-	/* TLB#2: TLB-entry for EBC */
-	tlbentry( 0x80000000, SZ_256M, 0x80000000, 1, AC_RWX | SA_IG)
-
-	/*
-	 * TLB#3: BOOT_CS (FLASH) must be forth. Before relocation SA_I can be
-	 * off to use the speed up boot process. It is patched after relocation
-	 * to enable SA_I
-	 */
-	tlbentry( CONFIG_SYS_BOOT_BASE_ADDR, SZ_1M, CONFIG_SYS_BOOT_BASE_ADDR, 1,
-		AC_RWX | SA_G)
-
-	/*
-	 * TLB entries for SDRAM are not needed on this platform.
-	 * They are dynamically generated in the SPD DDR(2) detection
-	 * routine.
-	 */
-
-	/* TLB#4: */
-	tlbentry( CONFIG_SYS_PCI_MEMBASE1, SZ_256M, CONFIG_SYS_PCI_MEMBASE1, 1,
-		AC_RW | SA_IG )
-	/* TLB#5: */
-	tlbentry( CONFIG_SYS_PCI_MEMBASE2, SZ_256M, CONFIG_SYS_PCI_MEMBASE2, 1,
-		AC_RW | SA_IG )
-	/* TLB#6: */
-	tlbentry( CONFIG_SYS_PCI_MEMBASE3, SZ_256M, CONFIG_SYS_PCI_MEMBASE3, 1,
-		AC_RW | SA_IG )
-
-	/* TLB-entry for Internal Registers & OCM */
-	/* TLB#7: */
-	tlbentry( 0xe0000000, SZ_16M, 0xe0000000, 0,
-		AC_RWX | SA_IG )
-
-	/*TLB-entry PCI registers*/
-	/* TLB#8: */
-	tlbentry( 0xEEC00000, SZ_1K, 0xEEC00000, 1,  AC_RWX | SA_IG )
-
-	/* TLB-entry for peripherals */
-	/* TLB#9: */
-	tlbentry( 0xEF000000, SZ_16M, 0xEF000000, 1, AC_RWX | SA_IG)
-
-	/*		CAN */
-	/* TLB#10: */
-	tlbentry( CONFIG_SYS_CS_1, SZ_1K, CONFIG_SYS_CS_1, 1, AC_RWX | SA_IG )
-
-	/* TLB#11:  CPLD and IMC-Standard 32 MB */
-	tlbentry( CONFIG_SYS_CS_2, SZ_16M, CONFIG_SYS_CS_2, 1, AC_RWX | SA_IG )
-
-	/* TLB#12: */
-	tlbentry( CONFIG_SYS_CS_2 + 0x1000000, SZ_16M, CONFIG_SYS_CS_2 + 0x1000000, 1,
-		AC_RWX | SA_IG )
-
-	 /*		IMC-Fast 32 MB */
-	/* TLB#13: */
-	tlbentry( CONFIG_SYS_CS_3, SZ_16M, CONFIG_SYS_CS_3, 1, AC_RWX | SA_IG )
-	/* TLB#14: */
-	tlbentry( CONFIG_SYS_CS_3 + 0x1000000, SZ_16M, CONFIG_SYS_CS_3, 1,
-		AC_RWX | SA_IG )
-
-	tlbtab_end