diff options
Diffstat (limited to 'board/netstal/hcu5/sdram.c')
| -rw-r--r-- | board/netstal/hcu5/sdram.c | 283 |
1 files changed, 0 insertions, 283 deletions
diff --git a/board/netstal/hcu5/sdram.c b/board/netstal/hcu5/sdram.c deleted file mode 100644 index e5ac46b549..0000000000 --- a/board/netstal/hcu5/sdram.c +++ /dev/null @@ -1,283 +0,0 @@ -/* - * (C) Copyright 2007 - * Niklaus Giger (Niklaus.Giger@netstal.com) - * (C) Copyright 2006 - * Sylvie Gohl, AMCC/IBM, gohl.sylvie@fr.ibm.com - * Jacqueline Pira-Ferriol, AMCC/IBM, jpira-ferriol@fr.ibm.com - * Thierry Roman, AMCC/IBM, thierry_roman@fr.ibm.com - * Alain Saurel, AMCC/IBM, alain.saurel@fr.ibm.com - * Robert Snyder, AMCC/IBM, rob.snyder@fr.ibm.com - * - * (C) Copyright 2006 - * Stefan Roese, DENX Software Engineering, sr@denx.de. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -/* define DEBUG for debug output */ -#undef DEBUG - -#include <common.h> -#include <asm/processor.h> -#include <asm/io.h> -#include <asm/mmu.h> -#include <asm/cache.h> -#include <asm/ppc440.h> - -void hcu_led_set(u32 value); -void dcbz_area(u32 start_address, u32 num_bytes); - -#define ECC_RAM 0x03267F0B -#define NO_ECC_RAM 0x00267F0B - -#define HCU_HW_SDRAM_CONFIG_MASK 0x7 - -#define MY_TLB_WORD2_I_ENABLE TLB_WORD2_I_ENABLE - /* disable caching on DDR2 */ - -void board_add_ram_info(int use_default) -{ - PPC4xx_SYS_INFO board_cfg; - u32 val; - - mfsdram(DDR0_22, val); - val &= DDR0_22_CTRL_RAW_MASK; - switch (val) { - case DDR0_22_CTRL_RAW_ECC_DISABLE: - puts(" (ECC disabled"); - break; - case DDR0_22_CTRL_RAW_ECC_CHECK_ONLY: - puts(" (ECC check only"); - break; - case DDR0_22_CTRL_RAW_NO_ECC_RAM: - puts(" (no ECC ram"); - break; - case DDR0_22_CTRL_RAW_ECC_ENABLE: - puts(" (ECC enabled"); - break; - } - - get_sys_info(&board_cfg); - printf(", %lu MHz", (board_cfg.freqPLB * 2) / 1000000); - - mfsdram(DDR0_03, val); - val = DDR0_03_CASLAT_DECODE(val); - printf(", CL%d)", val); -} - -/*-------------------------------------------------------------------- - * wait_for_dlllock. - *--------------------------------------------------------------------*/ -static int wait_for_dlllock(void) -{ - unsigned long val; - int wait = 0; - - /* -----------------------------------------------------------+ - * Wait for the DCC master delay line to finish calibration - * ----------------------------------------------------------*/ - mtdcr(SDRAM0_CFGADDR, DDR0_17); - val = DDR0_17_DLLLOCKREG_UNLOCKED; - - while (wait != 0xffff) { - val = mfdcr(SDRAM0_CFGDATA); - if ((val & DDR0_17_DLLLOCKREG_MASK) == - DDR0_17_DLLLOCKREG_LOCKED) - /* dlllockreg bit on */ - return 0; - else - wait++; - } - debug("0x%04x: DDR0_17 Value (dlllockreg bit): 0x%08x\n", wait, val); - debug("Waiting for dlllockreg bit to raise\n"); - - return -1; -} - -/*********************************************************************** - * - * sdram_panic -- Panic if we cannot configure the sdram correctly - * - ************************************************************************/ -void sdram_panic(const char *reason) -{ - printf("\n%s: reason %s", __FUNCTION__, reason); - hcu_led_set(0xff); - while (1) { - } - /* Never return */ -} - -#ifdef CONFIG_DDR_ECC -void blank_string(int size) -{ - int i; - - for (i=0; i<size; i++) - putc('\b'); - for (i=0; i<size; i++) - putc(' '); - for (i=0; i<size; i++) - putc('\b'); -} -/*---------------------------------------------------------------------------+ - * program_ecc. - *---------------------------------------------------------------------------*/ -static void program_ecc(unsigned long start_address, unsigned long num_bytes) -{ - u32 val; - char str[] = "ECC generation -"; -#if defined(CONFIG_PRAM) - u32 *magicPtr; - u32 magic; - - if ((mfspr(SPRN_DBCR0) & 0x80000000) == 0) { - /* only if no external debugger is alive! - * Check whether vxWorks is using EDR logging, if yes zero - * also PostMortem and user reserved memory - */ - magicPtr = (u32 *)(start_address + num_bytes - - (CONFIG_PRAM*1024) + sizeof(u32)); - magic = in_be32(magicPtr); - debug("%s: CONFIG_PRAM %d kB magic 0x%x 0x%p\n", - __FUNCTION__, CONFIG_PRAM, - magicPtr, magic); - if (magic == 0xbeefbabe) { - printf("%s: preserving at %p\n", __FUNCTION__, magicPtr); - num_bytes -= (CONFIG_PRAM*1024) - PM_RESERVED_MEM; - } - } -#endif - - sync(); - - puts(str); - - /* ECC bit set method for cached memory */ - /* Fast method, no noticeable delay */ - dcbz_area(start_address, num_bytes); - /* Write modified dcache lines back to memory */ - clean_dcache_range(start_address, start_address + num_bytes); - blank_string(strlen(str)); - - /* Clear error status */ - mfsdram(DDR0_00, val); - mtsdram(DDR0_00, val | DDR0_00_INT_ACK_ALL); - - /* - * Clear possible ECC errors - * If not done, then we could get an interrupt later on when - * exceptions are enabled. - */ - mtspr(SPRN_MCSR, mfspr(SPRN_MCSR)); - - /* Set 'int_mask' parameter to functionnal value */ - mfsdram(DDR0_01, val); - mtsdram(DDR0_01, ((val &~ DDR0_01_INT_MASK_MASK) | - DDR0_01_INT_MASK_ALL_OFF)); - - return; -} -#endif - - -/*********************************************************************** - * - * initdram -- 440EPx's DDR controller is a DENALI Core - * - ************************************************************************/ -phys_size_t initdram (int board_type) -{ - unsigned int dram_size = 0; - - mtsdram(DDR0_02, 0x00000000); - - /* Values must be kept in sync with Excel-table <<A0001492.>> ! */ - mtsdram(DDR0_00, 0x0000190A); - mtsdram(DDR0_01, 0x01000000); - mtsdram(DDR0_03, 0x02030602); - mtsdram(DDR0_04, 0x0A020200); - mtsdram(DDR0_05, 0x02020307); - switch (in_be16((u16 *)HCU_HW_VERSION_REGISTER) & HCU_HW_SDRAM_CONFIG_MASK) { - case 1: - dram_size = 256 * 1024 * 1024 ; - mtsdram(DDR0_06, 0x0102C812); /* 256MB RAM */ - mtsdram(DDR0_11, 0x0014C800); /* 256MB RAM */ - mtsdram(DDR0_43, 0x030A0200); /* 256MB RAM */ - break; - case 0: - default: - dram_size = 128 * 1024 * 1024 ; - mtsdram(DDR0_06, 0x0102C80D); /* 128MB RAM */ - mtsdram(DDR0_11, 0x000FC800); /* 128MB RAM */ - mtsdram(DDR0_43, 0x030A0300); /* 128MB RAM */ - break; - } - mtsdram(DDR0_07, 0x00090100); - - /* - * TCPD=200 cycles of clock input is required to lock the DLL. - * CKE must be HIGH the entire time.mtsdram(DDR0_08, 0x02C80001); - */ - mtsdram(DDR0_08, 0x02C80001); - mtsdram(DDR0_09, 0x00011D5F); - mtsdram(DDR0_10, 0x00000100); - mtsdram(DDR0_12, 0x00000003); - mtsdram(DDR0_14, 0x00000000); - mtsdram(DDR0_17, 0x1D000000); - mtsdram(DDR0_18, 0x1D1D1D1D); - mtsdram(DDR0_19, 0x1D1D1D1D); - mtsdram(DDR0_20, 0x0B0B0B0B); - mtsdram(DDR0_21, 0x0B0B0B0B); -#ifdef CONFIG_DDR_ECC - mtsdram(DDR0_22, ECC_RAM); -#else - mtsdram(DDR0_22, NO_ECC_RAM); -#endif - - mtsdram(DDR0_23, 0x00000000); - mtsdram(DDR0_24, 0x01020001); - mtsdram(DDR0_26, 0x2D930517); - mtsdram(DDR0_27, 0x00008236); - mtsdram(DDR0_28, 0x00000000); - mtsdram(DDR0_31, 0x00000000); - mtsdram(DDR0_42, 0x01000006); - mtsdram(DDR0_44, 0x00000003); - mtsdram(DDR0_02, 0x00000001); - wait_for_dlllock(); - mtsdram(DDR0_00, 0x40000000); /* Zero init bit */ - - /* - * Program tlb entries for this size (dynamic) - */ - remove_tlb(CONFIG_SYS_SDRAM_BASE, 256 << 20); - program_tlb(0, 0, dram_size, TLB_WORD2_W_ENABLE | TLB_WORD2_I_ENABLE); - - /* - * Setup 2nd TLB with same physical address but different virtual - * address with cache enabled. This is done for fast ECC generation. - */ - program_tlb(0, CONFIG_SYS_DDR_CACHED_ADDR, dram_size, 0); - -#ifdef CONFIG_DDR_ECC - /* - * If ECC is enabled, initialize the parity bits. - */ - program_ecc(CONFIG_SYS_DDR_CACHED_ADDR, dram_size); -#endif - - return (dram_size); -} |