diff options
Diffstat (limited to 'board/phytec/pcl063/README')
| -rw-r--r-- | board/phytec/pcl063/README | 26 |
1 files changed, 26 insertions, 0 deletions
diff --git a/board/phytec/pcl063/README b/board/phytec/pcl063/README new file mode 100644 index 0000000000..be83bdb0d8 --- /dev/null +++ b/board/phytec/pcl063/README @@ -0,0 +1,26 @@ +How to use U-Boot on PHYTEC phyBOARD-i.MX6UL-Segin +-------------------------------------------------- + +- Configure and build U-Boot for phyCORE-i.MX6UL: + + $ make mrproper + $ make phycore_pcl063_defconfig + $ make + + This will generate SPL and u-boot-dtb.img images. + +- The SPL and u-boot-dtb.img images need to be flashed into the micro SD card: + + $ sudo dd if=SPL of=/dev/mmcblk0 bs=1k seek=1; sync + $ sudo dd if=u-boot-dtb.img of=/dev/mmcblk0 bs=1k seek=69; sync + +- Jumper settings: + + JP1: Open: Boot from NAND + Closed: Boot from SD/MMC1 + +- Connect the Serial cable to UART0 and the PC for the console. + +- Insert the micro SD card in the board and power it up. + +- U-Boot messages should come up. |