diff options
Diffstat (limited to 'board/prodrive/p3mx')
| -rw-r--r-- | board/prodrive/p3mx/64460.h | 36 | ||||
| -rw-r--r-- | board/prodrive/p3mx/Kconfig | 12 | ||||
| -rw-r--r-- | board/prodrive/p3mx/MAINTAINERS | 7 | ||||
| -rw-r--r-- | board/prodrive/p3mx/Makefile | 10 | ||||
| -rw-r--r-- | board/prodrive/p3mx/eth.h | 28 | ||||
| -rw-r--r-- | board/prodrive/p3mx/misc.S | 245 | ||||
| -rw-r--r-- | board/prodrive/p3mx/mpsc.c | 997 | ||||
| -rw-r--r-- | board/prodrive/p3mx/mpsc.h | 140 | ||||
| -rw-r--r-- | board/prodrive/p3mx/mv_eth.c | 3291 | ||||
| -rw-r--r-- | board/prodrive/p3mx/mv_eth.h | 815 | ||||
| -rw-r--r-- | board/prodrive/p3mx/mv_regs.h | 1109 | ||||
| -rw-r--r-- | board/prodrive/p3mx/p3mx.c | 838 | ||||
| -rw-r--r-- | board/prodrive/p3mx/p3mx.h | 17 | ||||
| -rw-r--r-- | board/prodrive/p3mx/pci.c | 1003 | ||||
| -rw-r--r-- | board/prodrive/p3mx/sdram_init.c | 418 | ||||
| -rw-r--r-- | board/prodrive/p3mx/serial.c | 106 |
16 files changed, 0 insertions, 9072 deletions
diff --git a/board/prodrive/p3mx/64460.h b/board/prodrive/p3mx/64460.h deleted file mode 100644 index 9cf7feea58..0000000000 --- a/board/prodrive/p3mx/64460.h +++ /dev/null @@ -1,36 +0,0 @@ -/* - * (C) Copyright 2003 - * Ingo Assmus <ingo.assmus@keymile.com> - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -/* - * main board support/init for the Galileo Eval board DB64460. - */ - -#ifndef __64460_H__ -#define __64460_H__ - -/* CPU Configuration bits */ -#define CPU_CONF_ADDR_MISS_EN (1 << 8) -#define CPU_CONF_SINGLE_CPU (1 << 11) -#define CPU_CONF_ENDIANESS (1 << 12) -#define CPU_CONF_PIPELINE (1 << 13) -#define CPU_CONF_STOP_RETRY (1 << 17) -#define CPU_CONF_MULTI_DECODE (1 << 18) -#define CPU_CONF_DP_VALID (1 << 19) -#define CPU_CONF_PERR_PROP (1 << 22) -#define CPU_CONF_AACK_DELAY_2 (1 << 25) -#define CPU_CONF_AP_VALID (1 << 26) -#define CPU_CONF_REMAP_WR_DIS (1 << 27) - -/* CPU Master Control bits */ -#define CPU_MAST_CTL_ARB_EN (1 << 8) -#define CPU_MAST_CTL_MASK_BR_1 (1 << 9) -#define CPU_MAST_CTL_M_WR_TRIG (1 << 10) -#define CPU_MAST_CTL_M_RD_TRIG (1 << 11) -#define CPU_MAST_CTL_CLEAN_BLK (1 << 12) -#define CPU_MAST_CTL_FLUSH_BLK (1 << 13) - -#endif /* __64460_H__ */ diff --git a/board/prodrive/p3mx/Kconfig b/board/prodrive/p3mx/Kconfig deleted file mode 100644 index 28fb8bb3a0..0000000000 --- a/board/prodrive/p3mx/Kconfig +++ /dev/null @@ -1,12 +0,0 @@ -if TARGET_P3MX - -config SYS_BOARD - default "p3mx" - -config SYS_VENDOR - default "prodrive" - -config SYS_CONFIG_NAME - default "p3mx" - -endif diff --git a/board/prodrive/p3mx/MAINTAINERS b/board/prodrive/p3mx/MAINTAINERS deleted file mode 100644 index e60fdb64aa..0000000000 --- a/board/prodrive/p3mx/MAINTAINERS +++ /dev/null @@ -1,7 +0,0 @@ -P3MX BOARD -M: Stefan Roese <sr@denx.de> -S: Maintained -F: board/prodrive/p3mx/ -F: include/configs/p3mx.h -F: configs/p3m7448_defconfig -F: configs/p3m750_defconfig diff --git a/board/prodrive/p3mx/Makefile b/board/prodrive/p3mx/Makefile deleted file mode 100644 index 6ddda2296d..0000000000 --- a/board/prodrive/p3mx/Makefile +++ /dev/null @@ -1,10 +0,0 @@ -# -# (C) Copyright 2002-2006 -# Wolfgang Denk, DENX Software Engineering, wd@denx.de. -# -# SPDX-License-Identifier: GPL-2.0+ -# - -obj-y = misc.o -obj-y += p3mx.o mpsc.o mv_eth.o pci.o sdram_init.o serial.o \ - ../../Marvell/common/i2c.o ../../Marvell/common/memory.o diff --git a/board/prodrive/p3mx/eth.h b/board/prodrive/p3mx/eth.h deleted file mode 100644 index d5fe3cb5d3..0000000000 --- a/board/prodrive/p3mx/eth.h +++ /dev/null @@ -1,28 +0,0 @@ -/* - * (C) Copyright 2001 - * Josh Huber <huber@mclx.com>, Mission Critical Linux, Inc. - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -/* - * eth.h - header file for the polled mode GT ethernet driver - */ - -#ifndef __EVB64360_ETH_H__ -#define __EVB64360_ETH_H__ - -#include <asm/types.h> -#include <asm/io.h> -#include <asm/byteorder.h> -#include <common.h> - - -int db64360_eth0_poll(void); -int db64360_eth0_transmit(unsigned int s, volatile char *p); -void db64360_eth0_disable(void); -bool network_start(bd_t *bis); - -int mv6446x_eth_initialize(bd_t *); - -#endif /* __EVB64360_ETH_H__ */ diff --git a/board/prodrive/p3mx/misc.S b/board/prodrive/p3mx/misc.S deleted file mode 100644 index 233fd83bcc..0000000000 --- a/board/prodrive/p3mx/misc.S +++ /dev/null @@ -1,245 +0,0 @@ -#include <config.h> -#include <74xx_7xx.h> -#include "version.h" - -#include <ppc_asm.tmpl> -#include <ppc_defs.h> - -#include <asm/cache.h> -#include <asm/mmu.h> - -#include "../../Marvell/include/mv_gen_reg.h" - -#ifdef CONFIG_ECC - /* Galileo specific asm code for initializing ECC */ - .globl board_relocate_rom -board_relocate_rom: - mflr r7 - /* update the location of the GT registers */ - lis r11, CONFIG_SYS_GT_REGS@h - /* if we're using ECC, we must use the DMA engine to copy ourselves */ - bl start_idma_transfer_0 - bl wait_for_idma_0 - bl stop_idma_engine_0 - - mtlr r7 - blr - - .globl board_init_ecc -board_init_ecc: - mflr r7 - /* NOTE: r10 still contains the location we've been relocated to - * which happens to be TOP_OF_RAM - CONFIG_SYS_MONITOR_LEN */ - - /* now that we're running from ram, init the rest of main memory - * for ECC use */ - lis r8, CONFIG_SYS_MONITOR_LEN@h - ori r8, r8, CONFIG_SYS_MONITOR_LEN@l - - divw r3, r10, r8 - - /* set up the counter, and init the starting address */ - mtctr r3 - li r12, 0 - - /* bytes per transfer */ - mr r5, r8 -about_to_init_ecc: -1: mr r3, r12 - mr r4, r12 - bl start_idma_transfer_0 - bl wait_for_idma_0 - bl stop_idma_engine_0 - add r12, r12, r8 - bdnz 1b - - mtlr r7 - blr - - /* r3: dest addr - * r4: source addr - * r5: byte count - * r11: gt regbase - * trashes: r6, r5 - */ -start_idma_transfer_0: - /* set the byte count, including the OWN bit */ - mr r6, r11 - ori r6, r6, CHANNEL0_DMA_BYTE_COUNT - stwbrx r5, 0, (r6) - - /* set the source address */ - mr r6, r11 - ori r6, r6, CHANNEL0_DMA_SOURCE_ADDRESS - stwbrx r4, 0, (r6) - - /* set the dest address */ - mr r6, r11 - ori r6, r6, CHANNEL0_DMA_DESTINATION_ADDRESS - stwbrx r3, 0, (r6) - - /* set the next record pointer */ - li r5, 0 - mr r6, r11 - ori r6, r6, CHANNEL0NEXT_RECORD_POINTER - stwbrx r5, 0, (r6) - - /* set the low control register */ - /* bit 9 is NON chained mode, bit 31 is new style descriptors. - bit 12 is channel enable */ - ori r5, r5, (1 << 12) | (1 << 12) | (1 << 11) - /* 15 shifted by 16 (oris) == bit 31 */ - oris r5, r5, (1 << 15) - mr r6, r11 - ori r6, r6, CHANNEL0CONTROL - stwbrx r5, 0, (r6) - - blr - - /* this waits for the bytecount to return to zero, indicating - * that the trasfer is complete */ -wait_for_idma_0: - mr r5, r11 - lis r6, 0xff - ori r6, r6, 0xffff - ori r5, r5, CHANNEL0_DMA_BYTE_COUNT -1: lwbrx r4, 0, (r5) - and. r4, r4, r6 - bne 1b - - blr - - /* this turns off channel 0 of the idma engine */ -stop_idma_engine_0: - /* shut off the DMA engine */ - li r5, 0 - mr r6, r11 - ori r6, r6, CHANNEL0CONTROL - stwbrx r5, 0, (r6) - - blr -#endif - -#ifdef CONFIG_SYS_BOARD_ASM_INIT - /* NOTE: trashes r3-r7 */ - .globl board_asm_init -board_asm_init: - /* just move the GT registers to where they belong */ - lis r3, CONFIG_SYS_DFL_GT_REGS@h - ori r3, r3, CONFIG_SYS_DFL_GT_REGS@l - lis r4, CONFIG_SYS_GT_REGS@h - ori r4, r4, CONFIG_SYS_GT_REGS@l - li r5, INTERNAL_SPACE_DECODE - - /* test to see if we've already moved */ - lwbrx r6, r5, r4 - andi. r6, r6, 0xffff - /* check loading of R7 is: 0x0F80 should: 0xf800: DONE */ -/* rlwinm r7, r4, 8, 16, 31 - rlwinm r7, r4, 12, 16, 31 */ /* original */ - rlwinm r7, r4, 16, 16, 31 - /* -----------------------------------------------------*/ - cmp cr0, r7, r6 - beqlr - - /* nope, have to move the registers */ - lwbrx r6, r5, r3 - andis. r6, r6, 0xffff - or r6, r6, r7 - stwbrx r6, r5, r3 - - /* now, poll for the change */ -1: lwbrx r7, r5, r4 - cmp cr0, r7, r6 - bne 1b - - lis r3, CONFIG_SYS_INT_SRAM_BASE@h - ori r3, r3, CONFIG_SYS_INT_SRAM_BASE@l - rlwinm r3, r3, 16, 16, 31 - lis r4, CONFIG_SYS_GT_REGS@h - ori r4, r4, CONFIG_SYS_GT_REGS@l - li r5, INTEGRATED_SRAM_BASE_ADDR - stwbrx r3, r5, r4 - -2: lwbrx r6, r5, r4 - cmp cr0, r3, r6 - bne 2b - - /* done! */ - blr -#endif - -/* For use of the debug LEDs */ - .global led_on0_relocated -led_on0_relocated: - xor r21, r21, r21 - xor r18, r18, r18 - lis r18, 0xFC80 - ori r18, r18, 0x8000 -/* stw r21, 0x0(r18) */ - sync - blr - - .global led_off0_relocated -led_off0_relocated: - xor r21, r21, r21 - xor r18, r18, r18 - lis r18, 0xFC81 - ori r18, r18, 0x4000 -/* stw r21, 0x0(r18) */ - sync - blr - - .global led_on0 -led_on0: - xor r18, r18, r18 - lis r18, 0x1c80 - ori r18, r18, 0x8000 -/* stw r18, 0x0(r18) */ - sync - blr - - .global led_off0 -led_off0: - xor r18, r18, r18 - lis r18, 0x1c81 - ori r18, r18, 0x4000 -/* stw r18, 0x0(r18) */ - sync - blr - - .global led_on1 -led_on1: - xor r18, r18, r18 - lis r18, 0x1c80 - ori r18, r18, 0xc000 -/* stw r18, 0x0(r18) */ - sync - blr - - .global led_off1 -led_off1: - xor r18, r18, r18 - lis r18, 0x1c81 - ori r18, r18, 0x8000 -/* stw r18, 0x0(r18) */ - sync - blr - - .global led_on2 -led_on2: - xor r18, r18, r18 - lis r18, 0x1c81 - ori r18, r18, 0x0000 -/* stw r18, 0x0(r18) */ - sync - blr - - .global led_off2 -led_off2: - xor r18, r18, r18 - lis r18, 0x1c81 - ori r18, r18, 0xc000 -/* stw r18, 0x0(r18) */ - sync - blr diff --git a/board/prodrive/p3mx/mpsc.c b/board/prodrive/p3mx/mpsc.c deleted file mode 100644 index 97d09093bf..0000000000 --- a/board/prodrive/p3mx/mpsc.c +++ /dev/null @@ -1,997 +0,0 @@ -/* - * (C) Copyright 2001 - * John Clemens <clemens@mclx.com>, Mission Critical Linux, Inc. - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -/************************************************************************* - * changes for Marvell DB64460 eval board 2003 by Ingo Assmus <ingo.assmus@keymile.com> - * - ************************************************************************/ - -/* - * mpsc.c - driver for console over the MPSC. - */ - - -#include <common.h> -#include <config.h> -#include <asm/cache.h> - -#include <malloc.h> -#include "mpsc.h" - -#include "mv_regs.h" - -#include "../../Marvell/include/memory.h" - -DECLARE_GLOBAL_DATA_PTR; - -/* Define this if you wish to use the MPSC as a register based UART. - * This will force the serial port to not use the SDMA engine at all. - */ -#undef CONFIG_MPSC_DEBUG_PORT - - -int (*mpsc_putchar) (char ch) = mpsc_putchar_early; -char (*mpsc_getchar) (void) = mpsc_getchar_debug; -int (*mpsc_test_char) (void) = mpsc_test_char_debug; - - -static volatile unsigned int *rx_desc_base = NULL; -static unsigned int rx_desc_index = 0; -static volatile unsigned int *tx_desc_base = NULL; -static unsigned int tx_desc_index = 0; - -/* local function declarations */ -static int galmpsc_connect (int channel, int connect); -static int galmpsc_route_rx_clock (int channel, int brg); -static int galmpsc_route_tx_clock (int channel, int brg); -static int galmpsc_write_config_regs (int mpsc, int mode); -static int galmpsc_config_channel_regs (int mpsc); -static int galmpsc_set_char_length (int mpsc, int value); -static int galmpsc_set_stop_bit_length (int mpsc, int value); -static int galmpsc_set_parity (int mpsc, int value); -static int galmpsc_enter_hunt (int mpsc); -static int galmpsc_set_brkcnt (int mpsc, int value); -static int galmpsc_set_tcschar (int mpsc, int value); -static int galmpsc_set_snoop (int mpsc, int value); -static int galmpsc_shutdown (int mpsc); - -static int galsdma_set_RFT (int channel); -static int galsdma_set_SFM (int channel); -static int galsdma_set_rxle (int channel); -static int galsdma_set_txle (int channel); -static int galsdma_set_burstsize (int channel, unsigned int value); -static int galsdma_set_RC (int channel, unsigned int value); - -static int galbrg_set_CDV (int channel, int value); -static int galbrg_enable (int channel); -static int galbrg_disable (int channel); -static int galbrg_set_clksrc (int channel, int value); -static int galbrg_set_CUV (int channel, int value); - -static void galsdma_enable_rx (void); -static int galsdma_set_mem_space (unsigned int memSpace, - unsigned int memSpaceTarget, - unsigned int memSpaceAttr, - unsigned int baseAddress, - unsigned int size); - - -#define SOFTWARE_CACHE_MANAGEMENT - -#ifdef SOFTWARE_CACHE_MANAGEMENT -#define FLUSH_DCACHE(a,b) if(dcache_status()){clean_dcache_range((u32)(a),(u32)(b));} -#define FLUSH_AND_INVALIDATE_DCACHE(a,b) if(dcache_status()){flush_dcache_range((u32)(a),(u32)(b));} -#define INVALIDATE_DCACHE(a,b) if(dcache_status()){invalidate_dcache_range((u32)(a),(u32)(b));} -#else -#define FLUSH_DCACHE(a,b) -#define FLUSH_AND_INVALIDATE_DCACHE(a,b) -#define INVALIDATE_DCACHE(a,b) -#endif - -#ifdef CONFIG_MPSC_DEBUG_PORT -static void mpsc_debug_init (void) -{ - - volatile unsigned int temp; - - /* Clear the CFR (CHR4) */ - /* Write random 'Z' bit (bit 29) of CHR4 to enable debug uart *UNDOCUMENTED FEATURE* */ - temp = GTREGREAD (GALMPSC_CHANNELREG_4 + (CHANNEL * GALMPSC_REG_GAP)); - temp &= 0xffffff00; - temp |= BIT29; - GT_REG_WRITE (GALMPSC_CHANNELREG_4 + (CHANNEL * GALMPSC_REG_GAP), - temp); - - /* Set the Valid bit 'V' (bit 12) and int generation bit 'INT' (bit 15) */ - temp = GTREGREAD (GALMPSC_CHANNELREG_5 + (CHANNEL * GALMPSC_REG_GAP)); - temp |= (BIT12 | BIT15); - GT_REG_WRITE (GALMPSC_CHANNELREG_5 + (CHANNEL * GALMPSC_REG_GAP), - temp); - - /* Set int mask */ - temp = GTREGREAD (GALMPSC_0_INT_MASK); - temp |= BIT6; - GT_REG_WRITE (GALMPSC_0_INT_MASK, temp); -} -#endif - -char mpsc_getchar_debug (void) -{ - volatile int temp; - volatile unsigned int cause; - - cause = GTREGREAD (GALMPSC_0_INT_CAUSE); - while ((cause & BIT6) == 0) { - cause = GTREGREAD (GALMPSC_0_INT_CAUSE); - } - - temp = GTREGREAD (GALMPSC_CHANNELREG_10 + - (CHANNEL * GALMPSC_REG_GAP)); - /* By writing 1's to the set bits, the register is cleared */ - GT_REG_WRITE (GALMPSC_CHANNELREG_10 + (CHANNEL * GALMPSC_REG_GAP), - temp); - GT_REG_WRITE (GALMPSC_0_INT_CAUSE, cause & ~BIT6); - return (temp >> 16) & 0xff; -} - -/* special function for running out of flash. doesn't modify any - * global variables [josh] */ -int mpsc_putchar_early (char ch) -{ - int mpsc = CHANNEL; - int temp = - GTREGREAD (GALMPSC_CHANNELREG_2 + (mpsc * GALMPSC_REG_GAP)); - galmpsc_set_tcschar (mpsc, ch); - GT_REG_WRITE (GALMPSC_CHANNELREG_2 + (mpsc * GALMPSC_REG_GAP), - temp | 0x200); - -#define MAGIC_FACTOR (10*1000000) - - udelay (MAGIC_FACTOR / gd->baudrate); - return 0; -} - -/* This is used after relocation, see serial.c and mpsc_init2 */ -static int mpsc_putchar_sdma (char ch) -{ - volatile unsigned int *p; - unsigned int temp; - - - /* align the descriptor */ - p = tx_desc_base; - memset ((void *) p, 0, 8 * sizeof (unsigned int)); - - /* fill one 64 bit buffer */ - /* word swap, pad with 0 */ - p[4] = 0; /* x */ - p[5] = (unsigned int) ch; /* x */ - - /* CHANGED completely according to GT64260A dox - NTL */ - p[0] = 0x00010001; /* 0 */ - p[1] = DESC_OWNER_BIT | DESC_FIRST | DESC_LAST; /* 4 */ - p[2] = 0; /* 8 */ - p[3] = (unsigned int) &p[4]; /* c */ - -#if 0 - p[9] = DESC_FIRST | DESC_LAST; - p[10] = (unsigned int) &p[0]; - p[11] = (unsigned int) &p[12]; -#endif - - FLUSH_DCACHE (&p[0], &p[8]); - - GT_REG_WRITE (GALSDMA_0_CUR_TX_PTR + (CHANNEL * GALSDMA_REG_DIFF), - (unsigned int) &p[0]); - GT_REG_WRITE (GALSDMA_0_FIR_TX_PTR + (CHANNEL * GALSDMA_REG_DIFF), - (unsigned int) &p[0]); - - temp = GTREGREAD (GALSDMA_0_COM_REG + (CHANNEL * GALSDMA_REG_DIFF)); - temp |= (TX_DEMAND | TX_STOP); - GT_REG_WRITE (GALSDMA_0_COM_REG + (CHANNEL * GALSDMA_REG_DIFF), temp); - - INVALIDATE_DCACHE (&p[1], &p[2]); - - while (p[1] & DESC_OWNER_BIT) { - udelay (100); - INVALIDATE_DCACHE (&p[1], &p[2]); - } - return 0; -} - -char mpsc_getchar_sdma (void) -{ - static unsigned int done = 0; - volatile char ch; - unsigned int len = 0, idx = 0, temp; - - volatile unsigned int *p; - - - do { - p = &rx_desc_base[rx_desc_index * 8]; - - INVALIDATE_DCACHE (&p[0], &p[1]); - /* Wait for character */ - while (p[1] & DESC_OWNER_BIT) { - udelay (100); - INVALIDATE_DCACHE (&p[0], &p[1]); - } - - /* Handle error case */ - if (p[1] & (1 << 15)) { - printf ("oops, error: %08x\n", p[1]); - - temp = GTREGREAD (GALMPSC_CHANNELREG_2 + - (CHANNEL * GALMPSC_REG_GAP)); - temp |= (1 << 23); - GT_REG_WRITE (GALMPSC_CHANNELREG_2 + - (CHANNEL * GALMPSC_REG_GAP), temp); - - /* Can't poll on abort bit, so we just wait. */ - udelay (100); - - galsdma_enable_rx (); - } - - /* Number of bytes left in this descriptor */ - len = p[0] & 0xffff; - - if (len) { - /* Where to look */ - idx = 5; - if (done > 3) - idx = 4; - if (done > 7) - idx = 7; - if (done > 11) - idx = 6; - - INVALIDATE_DCACHE (&p[idx], &p[idx + 1]); - ch = p[idx] & 0xff; - done++; - } - - if (done < len) { - /* this descriptor has more bytes still - * shift down the char we just read, and leave the - * buffer in place for the next time around - */ - p[idx] = p[idx] >> 8; - FLUSH_DCACHE (&p[idx], &p[idx + 1]); - } - - if (done == len) { - /* nothing left in this descriptor. - * go to next one - */ - p[1] = DESC_OWNER_BIT | DESC_FIRST | DESC_LAST; - p[0] = 0x00100000; - FLUSH_DCACHE (&p[0], &p[1]); - /* Next descriptor */ - rx_desc_index = (rx_desc_index + 1) % RX_DESC; - done = 0; - } - } while (len == 0); /* galileo bug.. len might be zero */ - - return ch; -} - - -int mpsc_test_char_debug (void) -{ - if ((GTREGREAD (GALMPSC_0_INT_CAUSE) & BIT6) == 0) - return 0; - else { - return 1; - } -} - - -int mpsc_test_char_sdma (void) -{ - volatile unsigned int *p = &rx_desc_base[rx_desc_index * 8]; - - INVALIDATE_DCACHE (&p[1], &p[2]); - - if (p[1] & DESC_OWNER_BIT) - return 0; - else - return 1; -} - -int mpsc_init (int baud) -{ - /* BRG CONFIG */ - galbrg_set_baudrate (CHANNEL, baud); - galbrg_set_clksrc (CHANNEL, 8); /* set source=Tclk */ - galbrg_set_CUV (CHANNEL, 0); /* set up CountUpValue */ - galbrg_enable (CHANNEL); /* Enable BRG */ - - /* Set up clock routing */ - galmpsc_connect (CHANNEL, GALMPSC_CONNECT); /* connect it */ - - galmpsc_route_rx_clock (CHANNEL, CHANNEL); /* chosse BRG0 for Rx */ - galmpsc_route_tx_clock (CHANNEL, CHANNEL); /* chose BRG0 for Tx */ - - /* reset MPSC state */ - galmpsc_shutdown (CHANNEL); - - /* SDMA CONFIG */ - galsdma_set_burstsize (CHANNEL, L1_CACHE_BYTES / 8); /* in 64 bit words (8 bytes) */ - galsdma_set_txle (CHANNEL); - galsdma_set_rxle (CHANNEL); - galsdma_set_RC (CHANNEL, 0xf); - galsdma_set_SFM (CHANNEL); - galsdma_set_RFT (CHANNEL); - - /* MPSC CONFIG */ - galmpsc_write_config_regs (CHANNEL, GALMPSC_UART); - galmpsc_config_channel_regs (CHANNEL); - galmpsc_set_char_length (CHANNEL, GALMPSC_CHAR_LENGTH_8); /* 8 */ - galmpsc_set_parity (CHANNEL, GALMPSC_PARITY_NONE); /* N */ - galmpsc_set_stop_bit_length (CHANNEL, GALMPSC_STOP_BITS_1); /* 1 */ - -#ifdef CONFIG_MPSC_DEBUG_PORT - mpsc_debug_init (); -#endif - - /* COMM_MPSC CONFIG */ -#ifdef SOFTWARE_CACHE_MANAGEMENT - galmpsc_set_snoop (CHANNEL, 0); /* disable snoop */ -#else - galmpsc_set_snoop (CHANNEL, 1); /* enable snoop */ -#endif - - return 0; -} - - -void mpsc_sdma_init (void) -{ - /* Setup SDMA channel0 SDMA_CONFIG_REG*/ - GT_REG_WRITE (SDMA_CONFIG_REG (0), 0x000020ff); - - /* Enable MPSC-Window0 for DRAM Bank 0 */ - if (galsdma_set_mem_space (MV64460_CUNIT_BASE_ADDR_WIN_0_BIT, - MV64460_SDMA_DRAM_CS_0_TARGET, - 0, - memoryGetBankBaseAddress(0), - memoryGetBankSize(0)) != true) - printf ("%s: SDMA_Window0 memory setup failed !!! \n", - __FUNCTION__); - - - /* Enable MPSC-Window1 for DRAM Bank 1 */ - if (galsdma_set_mem_space (MV64460_CUNIT_BASE_ADDR_WIN_1_BIT, - MV64460_SDMA_DRAM_CS_1_TARGET, - 0, - memoryGetBankBaseAddress(1), - memoryGetBankSize(1)) != true) - printf ("%s: SDMA_Window1 memory setup failed !!! \n", - __FUNCTION__); - - - /* Disable MPSC-Window2 */ - if (galsdma_set_mem_space (MV64460_CUNIT_BASE_ADDR_WIN_2_BIT, - MV64460_SDMA_DRAM_CS_2_TARGET, - 0, - memoryGetBankBaseAddress(2), - memoryGetBankSize(2)) != true) - printf ("%s: SDMA_Window2 memory setup failed !!! \n", - __FUNCTION__); - - - /* Disable MPSC-Window3 */ - if (galsdma_set_mem_space (MV64460_CUNIT_BASE_ADDR_WIN_3_BIT, - MV64460_SDMA_DRAM_CS_3_TARGET, - 0, - memoryGetBankBaseAddress(3), - memoryGetBankSize(3)) != true) - printf ("%s: SDMA_Window3 memory setup failed !!! \n", - __FUNCTION__); - - /* Setup MPSC0 access mode Window0 full access */ - GT_SET_REG_BITS (MPSC0_ACCESS_PROTECTION_REG, - (MV64460_SDMA_WIN_ACCESS_FULL << - (MV64460_CUNIT_BASE_ADDR_WIN_0_BIT * 2))); - - /* Setup MPSC1 access mode Window1 full access */ - GT_SET_REG_BITS (MPSC1_ACCESS_PROTECTION_REG, - (MV64460_SDMA_WIN_ACCESS_FULL << - (MV64460_CUNIT_BASE_ADDR_WIN_0_BIT * 2))); - - /* Setup MPSC internal address space base address */ - GT_REG_WRITE (CUNIT_INTERNAL_SPACE_BASE_ADDR_REG, CONFIG_SYS_GT_REGS); - - /* no high address remap*/ - GT_REG_WRITE (CUNIT_HIGH_ADDR_REMAP_REG0, 0x00); - GT_REG_WRITE (CUNIT_HIGH_ADDR_REMAP_REG1, 0x00); - - /* clear interrupt cause register for MPSC (fault register)*/ - GT_REG_WRITE (CUNIT_INTERRUPT_CAUSE_REG, 0x00); -} - - -void mpsc_init2 (void) -{ - int i; - -#ifndef CONFIG_MPSC_DEBUG_PORT - mpsc_putchar = mpsc_putchar_sdma; - mpsc_getchar = mpsc_getchar_sdma; - mpsc_test_char = mpsc_test_char_sdma; -#endif - /* RX descriptors */ - rx_desc_base = (unsigned int *) malloc (((RX_DESC + 1) * 8) * - sizeof (unsigned int)); - - /* align descriptors */ - rx_desc_base = (unsigned int *) - (((unsigned int) rx_desc_base + 32) & 0xFFFFFFF0); - - rx_desc_index = 0; - - memset ((void *) rx_desc_base, 0, - (RX_DESC * 8) * sizeof (unsigned int)); - - for (i = 0; i < RX_DESC; i++) { - rx_desc_base[i * 8 + 3] = (unsigned int) &rx_desc_base[i * 8 + 4]; /* Buffer */ - rx_desc_base[i * 8 + 2] = (unsigned int) &rx_desc_base[(i + 1) * 8]; /* Next descriptor */ - rx_desc_base[i * 8 + 1] = DESC_OWNER_BIT | DESC_FIRST | DESC_LAST; /* Command & control */ - rx_desc_base[i * 8] = 0x00100000; - } - rx_desc_base[(i - 1) * 8 + 2] = (unsigned int) &rx_desc_base[0]; - - FLUSH_DCACHE (&rx_desc_base[0], &rx_desc_base[RX_DESC * 8]); - GT_REG_WRITE (GALSDMA_0_CUR_RX_PTR + (CHANNEL * GALSDMA_REG_DIFF), - (unsigned int) &rx_desc_base[0]); - - /* TX descriptors */ - tx_desc_base = (unsigned int *) malloc (((TX_DESC + 1) * 8) * - sizeof (unsigned int)); - - /* align descriptors */ - tx_desc_base = (unsigned int *) - (((unsigned int) tx_desc_base + 32) & 0xFFFFFFF0); - - tx_desc_index = -1; - - memset ((void *) tx_desc_base, 0, - (TX_DESC * 8) * sizeof (unsigned int)); - - for (i = 0; i < TX_DESC; i++) { - tx_desc_base[i * 8 + 5] = (unsigned int) 0x23232323; - tx_desc_base[i * 8 + 4] = (unsigned int) 0x23232323; - tx_desc_base[i * 8 + 3] = - (unsigned int) &tx_desc_base[i * 8 + 4]; - tx_desc_base[i * 8 + 2] = - (unsigned int) &tx_desc_base[(i + 1) * 8]; - tx_desc_base[i * 8 + 1] = - DESC_OWNER_BIT | DESC_FIRST | DESC_LAST; - - /* set sbytecnt and shadow byte cnt to 1 */ - tx_desc_base[i * 8] = 0x00010001; - } - tx_desc_base[(i - 1) * 8 + 2] = (unsigned int) &tx_desc_base[0]; - - FLUSH_DCACHE (&tx_desc_base[0], &tx_desc_base[TX_DESC * 8]); - - udelay (100); - - galsdma_enable_rx (); - - return; -} - -int galbrg_set_baudrate (int channel, int rate) -{ - int clock; - - galbrg_disable (channel); /*ok */ - -#ifdef ZUMA_NTL - /* from tclk */ - clock = (CONFIG_SYS_TCLK / (16 * rate)) - 1; -#else - clock = (CONFIG_SYS_TCLK / (16 * rate)) - 1; -#endif - - galbrg_set_CDV (channel, clock); /* set timer Reg. for BRG */ - - galbrg_enable (channel); - - gd->baudrate = rate; - - return 0; -} - -/* ------------------------------------------------------------------ */ - -/* Below are all the private functions that no one else needs */ - -static int galbrg_set_CDV (int channel, int value) -{ - unsigned int temp; - - temp = GTREGREAD (GALBRG_0_CONFREG + (channel * GALBRG_REG_GAP)); - temp &= 0xFFFF0000; - temp |= (value & 0x0000FFFF); - GT_REG_WRITE (GALBRG_0_CONFREG + (channel * GALBRG_REG_GAP), temp); - - return 0; -} - -static int galbrg_enable (int channel) -{ - unsigned int temp; - - temp = GTREGREAD (GALBRG_0_CONFREG + (channel * GALBRG_REG_GAP)); - temp |= 0x00010000; - GT_REG_WRITE (GALBRG_0_CONFREG + (channel * GALBRG_REG_GAP), temp); - - return 0; -} - -static int galbrg_disable (int channel) -{ - unsigned int temp; - - temp = GTREGREAD (GALBRG_0_CONFREG + (channel * GALBRG_REG_GAP)); - temp &= 0xFFFEFFFF; - GT_REG_WRITE (GALBRG_0_CONFREG + (channel * GALBRG_REG_GAP), temp); - - return 0; -} - -static int galbrg_set_clksrc (int channel, int value) -{ - unsigned int temp; - - temp = GTREGREAD (GALBRG_0_CONFREG + (channel * GALBRG_REG_GAP)); - temp &= 0xFFC3FFFF; /* Bit 18 - 21 (MV 64260 18-22) */ - temp |= (value << 18); - GT_REG_WRITE (GALBRG_0_CONFREG + (channel * GALBRG_REG_GAP), temp); - return 0; -} - -static int galbrg_set_CUV (int channel, int value) -{ - /* set CountUpValue */ - GT_REG_WRITE (GALBRG_0_BTREG + (channel * GALBRG_REG_GAP), value); - - return 0; -} - -#if 0 -static int galbrg_reset (int channel) -{ - unsigned int temp; - - temp = GTREGREAD (GALBRG_0_CONFREG + (channel * GALBRG_REG_GAP)); - temp |= 0x20000; - GT_REG_WRITE (GALBRG_0_CONFREG + (channel * GALBRG_REG_GAP), temp); - - return 0; -} -#endif - -static int galsdma_set_RFT (int channel) -{ - unsigned int temp; - - temp = GTREGREAD (GALSDMA_0_CONF_REG + (channel * GALSDMA_REG_DIFF)); - temp |= 0x00000001; - GT_REG_WRITE (GALSDMA_0_CONF_REG + (channel * GALSDMA_REG_DIFF), - temp); - - return 0; -} - -static int galsdma_set_SFM (int channel) -{ - unsigned int temp; - - temp = GTREGREAD (GALSDMA_0_CONF_REG + (channel * GALSDMA_REG_DIFF)); - temp |= 0x00000002; - GT_REG_WRITE (GALSDMA_0_CONF_REG + (channel * GALSDMA_REG_DIFF), - temp); - - return 0; -} - -static int galsdma_set_rxle (int channel) -{ - unsigned int temp; - - temp = GTREGREAD (GALSDMA_0_CONF_REG + (channel * GALSDMA_REG_DIFF)); - temp |= 0x00000040; - GT_REG_WRITE (GALSDMA_0_CONF_REG + (channel * GALSDMA_REG_DIFF), - temp); - - return 0; -} - -static int galsdma_set_txle (int channel) -{ - unsigned int temp; - - temp = GTREGREAD (GALSDMA_0_CONF_REG + (channel * GALSDMA_REG_DIFF)); - temp |= 0x00000080; - GT_REG_WRITE (GALSDMA_0_CONF_REG + (channel * GALSDMA_REG_DIFF), - temp); - - return 0; -} - -static int galsdma_set_RC (int channel, unsigned int value) -{ - unsigned int temp; - - temp = GTREGREAD (GALSDMA_0_CONF_REG + (channel * GALSDMA_REG_DIFF)); - temp &= ~0x0000003c; - temp |= (value << 2); - GT_REG_WRITE (GALSDMA_0_CONF_REG + (channel * GALSDMA_REG_DIFF), - temp); - - return 0; -} - -static int galsdma_set_burstsize (int channel, unsigned int value) -{ - unsigned int temp; - - temp = GTREGREAD (GALSDMA_0_CONF_REG + (channel * GALSDMA_REG_DIFF)); - temp &= 0xFFFFCFFF; - switch (value) { - case 8: - GT_REG_WRITE (GALSDMA_0_CONF_REG + - (channel * GALSDMA_REG_DIFF), - (temp | (0x3 << 12))); - break; - - case 4: - GT_REG_WRITE (GALSDMA_0_CONF_REG + - (channel * GALSDMA_REG_DIFF), - (temp | (0x2 << 12))); - break; - - case 2: - GT_REG_WRITE (GALSDMA_0_CONF_REG + - (channel * GALSDMA_REG_DIFF), - (temp | (0x1 << 12))); - break; - - case 1: - GT_REG_WRITE (GALSDMA_0_CONF_REG + - (channel * GALSDMA_REG_DIFF), - (temp | (0x0 << 12))); - break; - - default: - return -1; - break; - } - - return 0; -} - -static int galmpsc_connect (int channel, int connect) -{ - unsigned int temp; - - temp = GTREGREAD (GALMPSC_ROUTING_REGISTER); - - if ((channel == 0) && connect) - temp &= ~0x00000007; - else if ((channel == 1) && connect) - temp &= ~(0x00000007 << 6); - else if ((channel == 0) && !connect) - temp |= 0x00000007; - else - temp |= (0x00000007 << 6); - - /* Just in case... */ - temp &= 0x3fffffff; - - GT_REG_WRITE (GALMPSC_ROUTING_REGISTER, temp); - - return 0; -} - -static int galmpsc_route_rx_clock (int channel, int brg) -{ - unsigned int temp; - - temp = GTREGREAD (GALMPSC_RxC_ROUTE); - - if (channel == 0) { - temp &= ~0x0000000F; - temp |= brg; - } else { - temp &= ~0x00000F00; - temp |= (brg << 8); - } - - GT_REG_WRITE (GALMPSC_RxC_ROUTE, temp); - - return 0; -} - -static int galmpsc_route_tx_clock (int channel, int brg) -{ - unsigned int temp; - - temp = GTREGREAD (GALMPSC_TxC_ROUTE); - - if (channel == 0) { - temp &= ~0x0000000F; - temp |= brg; - } else { - temp &= ~0x00000F00; - temp |= (brg << 8); - } - - GT_REG_WRITE (GALMPSC_TxC_ROUTE, temp); - - return 0; -} - -static int galmpsc_write_config_regs (int mpsc, int mode) -{ - if (mode == GALMPSC_UART) { - /* Main config reg Low (Null modem, Enable Tx/Rx, UART mode) */ - GT_REG_WRITE (GALMPSC_MCONF_LOW + (mpsc * GALMPSC_REG_GAP), - 0x000004c4); - - /* Main config reg High (32x Rx/Tx clock mode, width=8bits */ - GT_REG_WRITE (GALMPSC_MCONF_HIGH + (mpsc * GALMPSC_REG_GAP), - 0x024003f8); - /* 22 2222 1111 */ - /* 54 3210 9876 */ - /* 0000 0010 0000 0000 */ - /* 1 */ - /* 098 7654 3210 */ - /* 0000 0011 1111 1000 */ - } else - return -1; - - return 0; -} - -static int galmpsc_config_channel_regs (int mpsc) -{ - GT_REG_WRITE (GALMPSC_CHANNELREG_1 + (mpsc * GALMPSC_REG_GAP), 0); - GT_REG_WRITE (GALMPSC_CHANNELREG_2 + (mpsc * GALMPSC_REG_GAP), 0); - GT_REG_WRITE (GALMPSC_CHANNELREG_3 + (mpsc * GALMPSC_REG_GAP), 1); - GT_REG_WRITE (GALMPSC_CHANNELREG_4 + (mpsc * GALMPSC_REG_GAP), 0); - GT_REG_WRITE (GALMPSC_CHANNELREG_5 + (mpsc * GALMPSC_REG_GAP), 0); - GT_REG_WRITE (GALMPSC_CHANNELREG_6 + (mpsc * GALMPSC_REG_GAP), 0); - GT_REG_WRITE (GALMPSC_CHANNELREG_7 + (mpsc * GALMPSC_REG_GAP), 0); - GT_REG_WRITE (GALMPSC_CHANNELREG_8 + (mpsc * GALMPSC_REG_GAP), 0); - GT_REG_WRITE (GALMPSC_CHANNELREG_9 + (mpsc * GALMPSC_REG_GAP), 0); - GT_REG_WRITE (GALMPSC_CHANNELREG_10 + (mpsc * GALMPSC_REG_GAP), 0); - - galmpsc_set_brkcnt (mpsc, 0x3); - galmpsc_set_tcschar (mpsc, 0xab); - - return 0; -} - -static int galmpsc_set_brkcnt (int mpsc, int value) -{ - unsigned int temp; - - temp = GTREGREAD (GALMPSC_CHANNELREG_1 + (mpsc * GALMPSC_REG_GAP)); - temp &= 0x0000FFFF; - temp |= (value << 16); - GT_REG_WRITE (GALMPSC_CHANNELREG_1 + (mpsc * GALMPSC_REG_GAP), temp); - - return 0; -} - -static int galmpsc_set_tcschar (int mpsc, int value) -{ - unsigned int temp; - - temp = GTREGREAD (GALMPSC_CHANNELREG_1 + (mpsc * GALMPSC_REG_GAP)); - temp &= 0xFFFF0000; - temp |= value; - GT_REG_WRITE (GALMPSC_CHANNELREG_1 + (mpsc * GALMPSC_REG_GAP), temp); - - return 0; -} - -static int galmpsc_set_char_length (int mpsc, int value) -{ - unsigned int temp; - - temp = GTREGREAD (GALMPSC_PROTOCONF_REG + (mpsc * GALMPSC_REG_GAP)); - temp &= 0xFFFFCFFF; - temp |= (value << 12); - GT_REG_WRITE (GALMPSC_PROTOCONF_REG + (mpsc * GALMPSC_REG_GAP), temp); - - return 0; -} - -static int galmpsc_set_stop_bit_length (int mpsc, int value) -{ - unsigned int temp; - - temp = GTREGREAD (GALMPSC_PROTOCONF_REG + (mpsc * GALMPSC_REG_GAP)); - temp &= 0xFFFFBFFF; - temp |= (value << 14); - GT_REG_WRITE (GALMPSC_PROTOCONF_REG + (mpsc * GALMPSC_REG_GAP), temp); - - return 0; -} - -static int galmpsc_set_parity (int mpsc, int value) -{ - unsigned int temp; - - temp = GTREGREAD (GALMPSC_CHANNELREG_2 + (mpsc * GALMPSC_REG_GAP)); - if (value != -1) { - temp &= 0xFFF3FFF3; - temp |= ((value << 18) | (value << 2)); - temp |= ((value << 17) | (value << 1)); - } else { - temp &= 0xFFF1FFF1; - } - - GT_REG_WRITE (GALMPSC_CHANNELREG_2 + (mpsc * GALMPSC_REG_GAP), temp); - - return 0; -} - -static int galmpsc_enter_hunt (int mpsc) -{ - int temp; - - temp = GTREGREAD (GALMPSC_CHANNELREG_2 + (mpsc * GALMPSC_REG_GAP)); - temp |= 0x80000000; - GT_REG_WRITE (GALMPSC_CHANNELREG_2 + (mpsc * GALMPSC_REG_GAP), temp); - - while (GTREGREAD (GALMPSC_CHANNELREG_2 + (mpsc * GALMPSC_REG_GAP)) & - MPSC_ENTER_HUNT) { - udelay (1); - } - return 0; -} - - -static int galmpsc_shutdown (int mpsc) -{ - unsigned int temp; - - /* cause RX abort (clears RX) */ - temp = GTREGREAD (GALMPSC_CHANNELREG_2 + (mpsc * GALMPSC_REG_GAP)); - temp |= MPSC_RX_ABORT | MPSC_TX_ABORT; - temp &= ~MPSC_ENTER_HUNT; - GT_REG_WRITE (GALMPSC_CHANNELREG_2 + (mpsc * GALMPSC_REG_GAP), temp); - - GT_REG_WRITE (GALSDMA_0_COM_REG, 0); - GT_REG_WRITE (GALSDMA_0_COM_REG, SDMA_TX_ABORT | SDMA_RX_ABORT); - - /* shut down the MPSC */ - GT_REG_WRITE (GALMPSC_MCONF_LOW, 0); - GT_REG_WRITE (GALMPSC_MCONF_HIGH, 0); - GT_REG_WRITE (GALMPSC_PROTOCONF_REG + (mpsc * GALMPSC_REG_GAP), 0); - - udelay (100); - - /* shut down the sdma engines. */ - /* reset config to default */ - GT_REG_WRITE (GALSDMA_0_CONF_REG, 0x000000fc); - - udelay (100); - - /* clear the SDMA current and first TX and RX pointers */ - GT_REG_WRITE (GALSDMA_0_CUR_RX_PTR, 0); - GT_REG_WRITE (GALSDMA_0_CUR_TX_PTR, 0); - GT_REG_WRITE (GALSDMA_0_FIR_TX_PTR, 0); - - udelay (100); - - return 0; -} - -static void galsdma_enable_rx (void) -{ - int temp; - - /* Enable RX processing */ - temp = GTREGREAD (GALSDMA_0_COM_REG + (CHANNEL * GALSDMA_REG_DIFF)); - temp |= RX_ENABLE; - GT_REG_WRITE (GALSDMA_0_COM_REG + (CHANNEL * GALSDMA_REG_DIFF), temp); - - galmpsc_enter_hunt (CHANNEL); -} - -static int galmpsc_set_snoop (int mpsc, int value) -{ - int reg = - mpsc ? MPSC_1_ADDRESS_CONTROL_LOW : - MPSC_0_ADDRESS_CONTROL_LOW; - int temp = GTREGREAD (reg); - - if (value) - temp |= (1 << 6) | (1 << 14) | (1 << 22) | (1 << 30); - else - temp &= ~((1 << 6) | (1 << 14) | (1 << 22) | (1 << 30)); - GT_REG_WRITE (reg, temp); - return 0; -} - -/******************************************************************************* -* galsdma_set_mem_space - Set MV64460 IDMA memory decoding map. -* -* DESCRIPTION: -* the MV64460 SDMA has its own address decoding map that is de-coupled -* from the CPU interface address decoding windows. The SDMA channels -* share four address windows. Each region can be individually configured -* by this function by associating it to a target interface and setting -* base and size values. -* -* NOTE!!! -* The size must be in 64Kbyte granularity. -* The base address must be aligned to the size. -* The size must be a series of 1s followed by a series of zeros -* -* OUTPUT: -* None. -* -* RETURN: -* true for success, false otherwise. -* -*******************************************************************************/ - -static int galsdma_set_mem_space (unsigned int memSpace, - unsigned int memSpaceTarget, - unsigned int memSpaceAttr, - unsigned int baseAddress, unsigned int size) -{ - unsigned int temp; - - if (size == 0) { - GT_RESET_REG_BITS (MV64460_CUNIT_BASE_ADDR_ENABLE_REG, - 1 << memSpace); - return true; - } - - /* The base address must be aligned to the size. */ - if (baseAddress % size != 0) { - return false; - } - if (size < 0x10000) { - return false; - } - - /* Align size and base to 64K */ - baseAddress &= 0xffff0000; - size &= 0xffff0000; - temp = size >> 16; - - /* Checking that the size is a sequence of '1' followed by a - sequence of '0' starting from LSB to MSB. */ - while ((temp > 0) && (temp & 0x1)) { - temp = temp >> 1; - } - - if (temp != 0) { - GT_REG_WRITE (MV64460_CUNIT_BASE_ADDR_REG0 + memSpace * 8, - (baseAddress | memSpaceTarget | memSpaceAttr)); - GT_REG_WRITE ((MV64460_CUNIT_SIZE0 + memSpace * 8), - (size - 1) & 0xffff0000); - GT_RESET_REG_BITS (MV64460_CUNIT_BASE_ADDR_ENABLE_REG, - 1 << memSpace); - } else { - /* An invalid size was specified */ - return false; - } - return true; -} diff --git a/board/prodrive/p3mx/mpsc.h b/board/prodrive/p3mx/mpsc.h deleted file mode 100644 index 241f28a31a..0000000000 --- a/board/prodrive/p3mx/mpsc.h +++ /dev/null @@ -1,140 +0,0 @@ -/* - * (C) Copyright 2001 - * John Clemens <clemens@mclx.com>, Mission Critical Linux, Inc. - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -/************************************************************************* - * changes for Marvell DB64360 eval board 2003 by Ingo Assmus <ingo.assmus@keymile.com> - * - ************************************************************************/ - - -/* - * mpsc.h - header file for MPSC in uart mode (console driver) - */ - -#ifndef __MPSC_H__ -#define __MPSC_H__ - -/* include actual Galileo defines */ -#include "../../Marvell/include/mv_gen_reg.h" - -/* driver related defines */ - -int mpsc_init(int baud); -void mpsc_sdma_init(void); -void mpsc_init2(void); -int galbrg_set_baudrate(int channel, int rate); - -int mpsc_putchar_early(char ch); -char mpsc_getchar_debug(void); -int mpsc_test_char_debug(void); - -int mpsc_test_char_sdma(void); - -extern int (*mpsc_putchar)(char ch); -extern char (*mpsc_getchar)(void); -extern int (*mpsc_test_char)(void); - -#define CHANNEL CONFIG_MPSC_PORT - -#define TX_DESC 5 -#define RX_DESC 20 - -#define DESC_FIRST 0x00010000 -#define DESC_LAST 0x00020000 -#define DESC_OWNER_BIT 0x80000000 - -#define TX_DEMAND 0x00800000 -#define TX_STOP 0x00010000 -#define RX_ENABLE 0x00000080 - -#define SDMA_RX_ABORT (1 << 15) -#define SDMA_TX_ABORT (1 << 31) -#define MPSC_TX_ABORT (1 << 7) -#define MPSC_RX_ABORT (1 << 23) -#define MPSC_ENTER_HUNT (1 << 31) - -/* MPSC defines */ - -#define GALMPSC_CONNECT 0x1 -#define GALMPSC_DISCONNECT 0x0 - -#define GALMPSC_UART 0x1 - -#define GALMPSC_STOP_BITS_1 0x0 -#define GALMPSC_STOP_BITS_2 0x1 -#define GALMPSC_CHAR_LENGTH_8 0x3 -#define GALMPSC_CHAR_LENGTH_7 0x2 - -#define GALMPSC_PARITY_ODD 0x0 -#define GALMPSC_PARITY_EVEN 0x2 -#define GALMPSC_PARITY_MARK 0x3 -#define GALMPSC_PARITY_SPACE 0x1 -#define GALMPSC_PARITY_NONE -1 - -#define GALMPSC_SERIAL_MULTIPLEX SERIAL_PORT_MULTIPLEX /* 0xf010 */ -#define GALMPSC_ROUTING_REGISTER MAIN_ROUTING_REGISTER /* 0xb400 */ -#define GALMPSC_RxC_ROUTE RECEIVE_CLOCK_ROUTING_REGISTER /* 0xb404 */ -#define GALMPSC_TxC_ROUTE TRANSMIT_CLOCK_ROUTING_REGISTER /* 0xb408 */ -#define GALMPSC_MCONF_LOW MPSC0_MAIN_CONFIGURATION_LOW /* 0x8000 */ -#define GALMPSC_MCONF_HIGH MPSC0_MAIN_CONFIGURATION_HIGH /* 0x8004 */ -#define GALMPSC_PROTOCONF_REG MPSC0_PROTOCOL_CONFIGURATION /* 0x8008 */ - -#define GALMPSC_REG_GAP 0x1000 - -#define GALMPSC_MCONF_CHREG_BASE CHANNEL0_REGISTER1 /* 0x800c */ -#define GALMPSC_CHANNELREG_1 CHANNEL0_REGISTER1 /* 0x800c */ -#define GALMPSC_CHANNELREG_2 CHANNEL0_REGISTER2 /* 0x8010 */ -#define GALMPSC_CHANNELREG_3 CHANNEL0_REGISTER3 /* 0x8014 */ -#define GALMPSC_CHANNELREG_4 CHANNEL0_REGISTER4 /* 0x8018 */ -#define GALMPSC_CHANNELREG_5 CHANNEL0_REGISTER5 /* 0x801c */ -#define GALMPSC_CHANNELREG_6 CHANNEL0_REGISTER6 /* 0x8020 */ -#define GALMPSC_CHANNELREG_7 CHANNEL0_REGISTER7 /* 0x8024 */ -#define GALMPSC_CHANNELREG_8 CHANNEL0_REGISTER8 /* 0x8028 */ -#define GALMPSC_CHANNELREG_9 CHANNEL0_REGISTER9 /* 0x802c */ -#define GALMPSC_CHANNELREG_10 CHANNEL0_REGISTER10 /* 0x8030 */ -#define GALMPSC_CHANNELREG_11 CHANNEL0_REGISTER11 /* 0x8034 */ - -#define GALSDMA_COMMAND_FIRST (1 << 16) -#define GALSDMA_COMMAND_LAST (1 << 17) -#define GALSDMA_COMMAND_ENABLEINT (1 << 23) -#define GALSDMA_COMMAND_AUTO (1 << 30) -#define GALSDMA_COMMAND_OWNER (1 << 31) - -#define GALSDMA_RX 0 -#define GALSDMA_TX 1 - -/* CHANNEL2 should be CHANNEL1, according to documentation, - * but to work with the current GTREGS file... - */ -#define GALSDMA_0_CONF_REG CHANNEL0_CONFIGURATION_REGISTER /* 0x4000 */ -#define GALSDMA_1_CONF_REG CHANNEL2_CONFIGURATION_REGISTER /* 0x6000 */ -#define GALSDMA_0_COM_REG CHANNEL0_COMMAND_REGISTER /* 0x4008 */ -#define GALSDMA_1_COM_REG CHANNEL2_COMMAND_REGISTER /* 0x6008 */ -#define GALSDMA_0_CUR_RX_PTR CHANNEL0_CURRENT_RX_DESCRIPTOR_POINTER /* 0x4810 */ -#define GALSDMA_0_CUR_TX_PTR CHANNEL0_CURRENT_TX_DESCRIPTOR_POINTER /* 0x4c10 */ -#define GALSDMA_0_FIR_TX_PTR CHANNEL0_FIRST_TX_DESCRIPTOR_POINTER /* 0x4c14 */ -#define GALSDMA_1_CUR_RX_PTR CHANNEL2_CURRENT_RX_DESCRIPTOR_POINTER /* 0x6810 */ -#define GALSDMA_1_CUR_TX_PTR CHANNEL2_CURRENT_TX_DESCRIPTOR_POINTER /* 0x6c10 */ -#define GALSDMA_1_FIR_TX_PTR CHANNEL2_FIRST_TX_DESCRIPTOR_POINTER /* 0x6c14 */ -#define GALSDMA_REG_DIFF 0x2000 - -/* WRONG in gt64260R.h */ -#define GALSDMA_INT_CAUSE 0xb800 /* SDMA_CAUSE */ -#define GALSDMA_INT_MASK 0xb880 /* SDMA_MASK */ -#define GALMPSC_0_INT_CAUSE 0xb804 -#define GALMPSC_0_INT_MASK 0xb884 - -#define GALSDMA_MODE_UART 0 -#define GALSDMA_MODE_BISYNC 1 -#define GALSDMA_MODE_HDLC 2 -#define GALSDMA_MODE_TRANSPARENT 3 - -#define GALBRG_0_CONFREG BRG0_CONFIGURATION_REGISTER /* 0xb200 */ -#define GALBRG_REG_GAP 0x0008 -#define GALBRG_0_BTREG BRG0_BAUDE_TUNING_REGISTER /* 0xb204 */ - -#endif /* __MPSC_H__ */ diff --git a/board/prodrive/p3mx/mv_eth.c b/board/prodrive/p3mx/mv_eth.c deleted file mode 100644 index ebd93c0288..0000000000 --- a/board/prodrive/p3mx/mv_eth.c +++ /dev/null @@ -1,3291 +0,0 @@ -/* - * (C) Copyright 2003 - * Ingo Assmus <ingo.assmus@keymile.com> - * - * based on - Driver for MV64460X ethernet ports - * Copyright (C) 2002 rabeeh@galileo.co.il - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -/* - * mv_eth.c - header file for the polled mode GT ethernet driver - */ -#include <common.h> -#include <net.h> -#include <malloc.h> -#include <miiphy.h> - -#include "mv_eth.h" - -/* enable Debug outputs */ - -#undef DEBUG_MV_ETH - -#ifdef DEBUG_MV_ETH -#define DEBUG -#define DP(x) x -#else -#define DP(x) -#endif - -/* PHY DFCDL Registers */ -#define ETH_PHY_DFCDL_CONFIG0_REG 0x2100 -#define ETH_PHY_DFCDL_CONFIG1_REG 0x2104 -#define ETH_PHY_DFCDL_ADDR_REG 0x2110 -#define ETH_PHY_DFCDL_DATA0_REG 0x2114 - -#define PHY_AUTONEGOTIATE_TIMEOUT 4000 /* 4000 ms autonegotiate timeout */ -#define PHY_UPDATE_TIMEOUT 10000 - -#undef MV64460_CHECKSUM_OFFLOAD -/************************************************************************* -* The first part is the high level driver of the gigE ethernet ports. * -*************************************************************************/ - -/* Definition for configuring driver */ -/* #define UPDATE_STATS_BY_SOFTWARE */ -#undef MV64460_RX_QUEUE_FILL_ON_TASK - -/* Constants */ -#define MAGIC_ETH_RUNNING 8031971 -#define MV64460_INTERNAL_SRAM_SIZE _256K -#define EXTRA_BYTES 32 -#define WRAP ETH_HLEN + 2 + 4 + 16 -#define BUFFER_MTU dev->mtu + WRAP -#define INT_CAUSE_UNMASK_ALL 0x0007ffff -#define INT_CAUSE_UNMASK_ALL_EXT 0x0011ffff -#ifdef MV64460_RX_FILL_ON_TASK -#define INT_CAUSE_MASK_ALL 0x00000000 -#define INT_CAUSE_CHECK_BITS INT_CAUSE_UNMASK_ALL -#define INT_CAUSE_CHECK_BITS_EXT INT_CAUSE_UNMASK_ALL_EXT -#endif - -/* Read/Write to/from MV64460 internal registers */ -#define MV_REG_READ(offset) my_le32_to_cpu(* (volatile unsigned int *) (INTERNAL_REG_BASE_ADDR + offset)) -#define MV_REG_WRITE(offset,data) *(volatile unsigned int *) (INTERNAL_REG_BASE_ADDR + offset) = my_cpu_to_le32 (data) -#define MV_SET_REG_BITS(regOffset,bits) ((*((volatile unsigned int*)((INTERNAL_REG_BASE_ADDR) + (regOffset)))) |= ((unsigned int)my_cpu_to_le32(bits))) -#define MV_RESET_REG_BITS(regOffset,bits) ((*((volatile unsigned int*)((INTERNAL_REG_BASE_ADDR) + (regOffset)))) &= ~((unsigned int)my_cpu_to_le32(bits))) - -#define my_cpu_to_le32(x) my_le32_to_cpu((x)) - -/* Static function declarations */ -static int mv64460_eth_real_open (struct eth_device *eth); -static int mv64460_eth_real_stop (struct eth_device *eth); -static struct net_device_stats *mv64460_eth_get_stats (struct eth_device - *dev); -static void eth_port_init_mac_tables (ETH_PORT eth_port_num); -static void mv64460_eth_update_stat (struct eth_device *dev); -bool db64460_eth_start (struct eth_device *eth); -unsigned int eth_read_mib_counter (ETH_PORT eth_port_num, - unsigned int mib_offset); -int mv64460_eth_receive (struct eth_device *dev); - -int mv64460_eth_xmit (struct eth_device *, volatile void *packet, int length); - -int mv_miiphy_read(const char *devname, unsigned char phy_addr, - unsigned char phy_reg, unsigned short *value); -int mv_miiphy_write(const char *devname, unsigned char phy_addr, - unsigned char phy_reg, unsigned short value); - -int phy_setup_aneg (char *devname, unsigned char addr); - -#ifndef UPDATE_STATS_BY_SOFTWARE -static void mv64460_eth_print_stat (struct eth_device *dev); -#endif - -extern unsigned int INTERNAL_REG_BASE_ADDR; - -unsigned long my_le32_to_cpu (unsigned long x) -{ - return (((x & 0x000000ffU) << 24) | - ((x & 0x0000ff00U) << 8) | - ((x & 0x00ff0000U) >> 8) | ((x & 0xff000000U) >> 24)); -} - -/************************************************* - *Helper functions - used inside the driver only * - *************************************************/ -#ifdef DEBUG_MV_ETH -void print_globals (struct eth_device *dev) -{ - printf ("Ethernet PRINT_Globals-Debug function\n"); - printf ("Base Address for ETH_PORT_INFO: %08x\n", - (unsigned int) dev->priv); - printf ("Base Address for mv64460_eth_priv: %08x\n", - (unsigned int) &(((ETH_PORT_INFO *) dev->priv)-> - port_private)); - - printf ("GT Internal Base Address: %08x\n", - INTERNAL_REG_BASE_ADDR); - printf ("Base Address for TX-DESCs: %08x Number of allocated Buffers %d\n", - (unsigned int) ((ETH_PORT_INFO *) dev->priv)->p_tx_desc_area_base[0], MV64460_TX_QUEUE_SIZE); - printf ("Base Address for RX-DESCs: %08x Number of allocated Buffers %d\n", - (unsigned int) ((ETH_PORT_INFO *) dev->priv)->p_rx_desc_area_base[0], MV64460_RX_QUEUE_SIZE); - printf ("Base Address for RX-Buffer: %08x allocated Bytes %d\n", - (unsigned int) ((ETH_PORT_INFO *) dev->priv)-> - p_rx_buffer_base[0], - (MV64460_RX_QUEUE_SIZE * MV64460_RX_BUFFER_SIZE) + 32); - printf ("Base Address for TX-Buffer: %08x allocated Bytes %d\n", - (unsigned int) ((ETH_PORT_INFO *) dev->priv)-> - p_tx_buffer_base[0], - (MV64460_TX_QUEUE_SIZE * MV64460_TX_BUFFER_SIZE) + 32); -} -#endif - -/********************************************************************** - * mv64460_eth_print_phy_status - * - * Prints gigabit ethenret phy status - * - * Input : pointer to ethernet interface network device structure - * Output : N/A - **********************************************************************/ -void mv64460_eth_print_phy_status (struct eth_device *dev) -{ - struct mv64460_eth_priv *port_private; - unsigned int port_num; - ETH_PORT_INFO *ethernet_private = (ETH_PORT_INFO *) dev->priv; - unsigned int port_status, phy_reg_data; - - port_private = - (struct mv64460_eth_priv *) ethernet_private->port_private; - port_num = port_private->port_num; - - /* Check Link status on phy */ - eth_port_read_smi_reg (port_num, 1, &phy_reg_data); - if (!(phy_reg_data & 0x20)) { - printf ("Ethernet port changed link status to DOWN\n"); - } else { - port_status = - MV_REG_READ (MV64460_ETH_PORT_STATUS_REG (port_num)); - printf ("Ethernet status port %d: Link up", port_num); - printf (", %s", - (port_status & BIT2) ? "Full Duplex" : "Half Duplex"); - if (port_status & BIT4) - printf (", Speed 1 Gbps"); - else - printf (", %s", - (port_status & BIT5) ? "Speed 100 Mbps" : - "Speed 10 Mbps"); - printf ("\n"); - } -} - -/********************************************************************** - * u-boot entry functions for mv64460_eth - * - **********************************************************************/ -int db64460_eth_probe (struct eth_device *dev) -{ - return ((int) db64460_eth_start (dev)); -} - -int db64460_eth_poll (struct eth_device *dev) -{ - return mv64460_eth_receive (dev); -} - -int db64460_eth_transmit(struct eth_device *dev, void *packet, int length) -{ - mv64460_eth_xmit (dev, packet, length); - return 0; -} - -void db64460_eth_disable (struct eth_device *dev) -{ - mv64460_eth_stop (dev); -} - -#define DFCDL(write,read) ((write << 6) | read) -unsigned int ethDfcdls[] = { - DFCDL(0,0), DFCDL(1,1), DFCDL(2,2), DFCDL(3,3), - DFCDL(4,4), DFCDL(5,5), DFCDL(6,6), DFCDL(7,7), - DFCDL(8,8), DFCDL(9,9), DFCDL(10,10), DFCDL(11,11), - DFCDL(12,12), DFCDL(13,13), DFCDL(14,14), DFCDL(15,15), - DFCDL(16,16), DFCDL(17,17), DFCDL(18,18), DFCDL(19,19), - DFCDL(20,20), DFCDL(21,21), DFCDL(22,22), DFCDL(23,23), - DFCDL(24,24), DFCDL(25,25), DFCDL(26,26), DFCDL(27,27), - DFCDL(28,28), DFCDL(29,29), DFCDL(30,30), DFCDL(31,31), - DFCDL(32,32), DFCDL(33,33), DFCDL(34,34), DFCDL(35,35), - DFCDL(36,36), DFCDL(37,37), DFCDL(38,38), DFCDL(39,39), - DFCDL(40,40), DFCDL(41,41), DFCDL(42,42), DFCDL(43,43), - DFCDL(44,44), DFCDL(45,45), DFCDL(46,46), DFCDL(47,47), - DFCDL(48,48), DFCDL(49,49), DFCDL(50,50), DFCDL(51,51), - DFCDL(52,52), DFCDL(53,53), DFCDL(54,54), DFCDL(55,55), - DFCDL(56,56), DFCDL(57,57), DFCDL(58,58), DFCDL(59,59), - DFCDL(60,60), DFCDL(61,61), DFCDL(62,62), DFCDL(63,63), -}; - -void mv_eth_phy_init (void) -{ - int i; - - MV_REG_WRITE (ETH_PHY_DFCDL_ADDR_REG, 0); - - for (i = 0; i < 64; i++) { - MV_REG_WRITE (ETH_PHY_DFCDL_DATA0_REG, ethDfcdls[i]); - } - - MV_REG_WRITE (ETH_PHY_DFCDL_CONFIG0_REG, 0x300000); -} - -void mv6446x_eth_initialize (bd_t * bis) -{ - struct eth_device *dev; - ETH_PORT_INFO *ethernet_private; - struct mv64460_eth_priv *port_private; - int devnum, x, temp; - char *s, *e, buf[64]; - - /* P3M750 only - * Set RGMII clock drives strength - */ - temp = MV_REG_READ(0x20A0); - temp |= 0x04000080; - MV_REG_WRITE(0x20A0, temp); - - mv_eth_phy_init(); - - for (devnum = 0; devnum < MV_ETH_DEVS; devnum++) { - dev = calloc (sizeof (*dev), 1); - if (!dev) { - printf ("%s: mv_enet%d allocation failure, %s\n", - __FUNCTION__, devnum, "eth_device structure"); - return; - } - - /* must be less than sizeof(dev->name) */ - sprintf (dev->name, "mv_enet%d", devnum); - -#ifdef DEBUG - printf ("Initializing %s\n", dev->name); -#endif - - /* Extract the MAC address from the environment */ - switch (devnum) { - case 0: - s = "ethaddr"; - break; - case 1: - s = "eth1addr"; - break; - case 2: - s = "eth2addr"; - break; - default: /* this should never happen */ - printf ("%s: Invalid device number %d\n", - __FUNCTION__, devnum); - return; - } - - temp = getenv_f(s, buf, sizeof (buf)); - s = (temp > 0) ? buf : NULL; - -#ifdef DEBUG - printf ("Setting MAC %d to %s\n", devnum, s); -#endif - for (x = 0; x < 6; ++x) { - dev->enetaddr[x] = s ? simple_strtoul (s, &e, 16) : 0; - if (s) - s = (*e) ? e + 1 : e; - } - /* ronen - set the MAC addr in the HW */ - eth_port_uc_addr_set (devnum, dev->enetaddr, 0); - - dev->init = (void *) db64460_eth_probe; - dev->halt = (void *) ethernet_phy_reset; - dev->send = (void *) db64460_eth_transmit; - dev->recv = (void *) db64460_eth_poll; - - ethernet_private = calloc (sizeof (*ethernet_private), 1); - dev->priv = (void *)ethernet_private; - if (!ethernet_private) { - printf ("%s: %s allocation failure, %s\n", - __FUNCTION__, dev->name, - "Private Device Structure"); - free (dev); - return; - } - /* start with an zeroed ETH_PORT_INFO */ - memset (ethernet_private, 0, sizeof (ETH_PORT_INFO)); - memcpy (ethernet_private->port_mac_addr, dev->enetaddr, 6); - - /* set pointer to memory for stats data structure etc... */ - port_private = calloc (sizeof (*ethernet_private), 1); - ethernet_private->port_private = (void *)port_private; - if (!port_private) { - printf ("%s: %s allocation failure, %s\n", - __FUNCTION__, dev->name, - "Port Private Device Structure"); - - free (ethernet_private); - free (dev); - return; - } - - port_private->stats = - calloc (sizeof (struct net_device_stats), 1); - if (!port_private->stats) { - printf ("%s: %s allocation failure, %s\n", - __FUNCTION__, dev->name, - "Net stat Structure"); - - free (port_private); - free (ethernet_private); - free (dev); - return; - } - memset (ethernet_private->port_private, 0, - sizeof (struct mv64460_eth_priv)); - switch (devnum) { - case 0: - ethernet_private->port_num = ETH_0; - break; - case 1: - ethernet_private->port_num = ETH_1; - break; - case 2: - ethernet_private->port_num = ETH_2; - break; - default: - printf ("Invalid device number %d\n", devnum); - break; - }; - - port_private->port_num = devnum; - /* - * Read MIB counter on the GT in order to reset them, - * then zero all the stats fields in memory - */ - mv64460_eth_update_stat (dev); - memset (port_private->stats, 0, - sizeof (struct net_device_stats)); - /* Extract the MAC address from the environment */ - switch (devnum) { - case 0: - s = "ethaddr"; - break; - case 1: - s = "eth1addr"; - break; - case 2: - s = "eth2addr"; - break; - default: /* this should never happen */ - printf ("%s: Invalid device number %d\n", - __FUNCTION__, devnum); - return; - } - - temp = getenv_f(s, buf, sizeof (buf)); - s = (temp > 0) ? buf : NULL; - -#ifdef DEBUG - printf ("Setting MAC %d to %s\n", devnum, s); -#endif - for (x = 0; x < 6; ++x) { - dev->enetaddr[x] = s ? simple_strtoul (s, &e, 16) : 0; - if (s) - s = (*e) ? e + 1 : e; - } - - DP (printf ("Allocating descriptor and buffer rings\n")); - - ethernet_private->p_rx_desc_area_base[0] = - (ETH_RX_DESC *) memalign (16, - RX_DESC_ALIGNED_SIZE * - MV64460_RX_QUEUE_SIZE + 1); - ethernet_private->p_tx_desc_area_base[0] = - (ETH_TX_DESC *) memalign (16, - TX_DESC_ALIGNED_SIZE * - MV64460_TX_QUEUE_SIZE + 1); - - ethernet_private->p_rx_buffer_base[0] = - (char *) memalign (16, - MV64460_RX_QUEUE_SIZE * - MV64460_TX_BUFFER_SIZE + 1); - ethernet_private->p_tx_buffer_base[0] = - (char *) memalign (16, - MV64460_RX_QUEUE_SIZE * - MV64460_TX_BUFFER_SIZE + 1); - -#ifdef DEBUG_MV_ETH - /* DEBUG OUTPUT prints adresses of globals */ - print_globals (dev); -#endif - eth_register (dev); - - miiphy_register(dev->name, mv_miiphy_read, mv_miiphy_write); - } - DP (printf ("%s: exit\n", __FUNCTION__)); - -} - -/********************************************************************** - * mv64460_eth_open - * - * This function is called when openning the network device. The function - * should initialize all the hardware, initialize cyclic Rx/Tx - * descriptors chain and buffers and allocate an IRQ to the network - * device. - * - * Input : a pointer to the network device structure - * / / ronen - changed the output to match net/eth.c needs - * Output : nonzero of success , zero if fails. - * under construction - **********************************************************************/ - -int mv64460_eth_open (struct eth_device *dev) -{ - return (mv64460_eth_real_open (dev)); -} - -/* Helper function for mv64460_eth_open */ -static int mv64460_eth_real_open (struct eth_device *dev) -{ - - unsigned int queue; - ETH_PORT_INFO *ethernet_private; - struct mv64460_eth_priv *port_private; - unsigned int port_num; - ushort reg_short; - int speed; - int duplex; - int i; - int reg; - - ethernet_private = (ETH_PORT_INFO *) dev->priv; - /* ronen - when we update the MAC env params we only update dev->enetaddr - see ./net/eth.c eth_set_enetaddr() */ - memcpy (ethernet_private->port_mac_addr, dev->enetaddr, 6); - - port_private = (struct mv64460_eth_priv *) ethernet_private->port_private; - port_num = port_private->port_num; - - /* Stop RX Queues */ - MV_REG_WRITE (MV64460_ETH_RECEIVE_QUEUE_COMMAND_REG (port_num), 0x0000ff00); - - /* Clear the ethernet port interrupts */ - MV_REG_WRITE (MV64460_ETH_INTERRUPT_CAUSE_REG (port_num), 0); - MV_REG_WRITE (MV64460_ETH_INTERRUPT_CAUSE_EXTEND_REG (port_num), 0); - - /* Unmask RX buffer and TX end interrupt */ - MV_REG_WRITE (MV64460_ETH_INTERRUPT_MASK_REG (port_num), - INT_CAUSE_UNMASK_ALL); - - /* Unmask phy and link status changes interrupts */ - MV_REG_WRITE (MV64460_ETH_INTERRUPT_EXTEND_MASK_REG (port_num), - INT_CAUSE_UNMASK_ALL_EXT); - - /* Set phy address of the port */ - ethernet_private->port_phy_addr = 0x1 + (port_num << 1); - reg = ethernet_private->port_phy_addr; - - /* Activate the DMA channels etc */ - eth_port_init (ethernet_private); - - /* "Allocate" setup TX rings */ - - for (queue = 0; queue < MV64460_TX_QUEUE_NUM; queue++) { - unsigned int size; - - port_private->tx_ring_size[queue] = MV64460_TX_QUEUE_SIZE; - size = (port_private->tx_ring_size[queue] * TX_DESC_ALIGNED_SIZE); /*size = no of DESCs times DESC-size */ - ethernet_private->tx_desc_area_size[queue] = size; - - /* first clear desc area completely */ - memset ((void *) ethernet_private->p_tx_desc_area_base[queue], - 0, ethernet_private->tx_desc_area_size[queue]); - - /* initialize tx desc ring with low level driver */ - if (ether_init_tx_desc_ring - (ethernet_private, ETH_Q0, - port_private->tx_ring_size[queue], - MV64460_TX_BUFFER_SIZE /* Each Buffer is 1600 Byte */ , - (unsigned int) ethernet_private-> - p_tx_desc_area_base[queue], - (unsigned int) ethernet_private-> - p_tx_buffer_base[queue]) == false) - printf ("### Error initializing TX Ring\n"); - } - - /* "Allocate" setup RX rings */ - for (queue = 0; queue < MV64460_RX_QUEUE_NUM; queue++) { - unsigned int size; - - /* Meantime RX Ring are fixed - but must be configurable by user */ - port_private->rx_ring_size[queue] = MV64460_RX_QUEUE_SIZE; - size = (port_private->rx_ring_size[queue] * - RX_DESC_ALIGNED_SIZE); - ethernet_private->rx_desc_area_size[queue] = size; - - /* first clear desc area completely */ - memset ((void *) ethernet_private->p_rx_desc_area_base[queue], - 0, ethernet_private->rx_desc_area_size[queue]); - if ((ether_init_rx_desc_ring - (ethernet_private, ETH_Q0, - port_private->rx_ring_size[queue], - MV64460_RX_BUFFER_SIZE /* Each Buffer is 1600 Byte */ , - (unsigned int) ethernet_private-> - p_rx_desc_area_base[queue], - (unsigned int) ethernet_private-> - p_rx_buffer_base[queue])) == false) - printf ("### Error initializing RX Ring\n"); - } - - eth_port_start (ethernet_private); - - /* Set maximum receive buffer to 9700 bytes */ - MV_REG_WRITE (MV64460_ETH_PORT_SERIAL_CONTROL_REG (port_num), - (0x5 << 17) | - (MV_REG_READ - (MV64460_ETH_PORT_SERIAL_CONTROL_REG (port_num)) - & 0xfff1ffff)); - - /* - * Set ethernet MTU for leaky bucket mechanism to 0 - this will - * disable the leaky bucket mechanism . - */ - - MV_REG_WRITE (MV64460_ETH_MAXIMUM_TRANSMIT_UNIT (port_num), 0); - MV_REG_READ (MV64460_ETH_PORT_STATUS_REG (port_num)); - -#if defined(CONFIG_PHY_RESET) - /* - * Reset the phy, only if its the first time through - * otherwise, just check the speeds & feeds - */ - if (port_private->first_init == 0) { - port_private->first_init = 1; - ethernet_phy_reset (port_num); - - /* Start/Restart autonegotiation */ - phy_setup_aneg (dev->name, reg); - udelay (1000); - } -#endif /* defined(CONFIG_PHY_RESET) */ - - miiphy_read (dev->name, reg, MII_BMSR, ®_short); - - /* - * Wait if PHY is capable of autonegotiation and autonegotiation is not complete - */ - if ((reg_short & BMSR_ANEGCAPABLE) - && !(reg_short & BMSR_ANEGCOMPLETE)) { - puts ("Waiting for PHY auto negotiation to complete"); - i = 0; - while (!(reg_short & BMSR_ANEGCOMPLETE)) { - /* - * Timeout reached ? - */ - if (i > PHY_AUTONEGOTIATE_TIMEOUT) { - puts (" TIMEOUT !\n"); - break; - } - - if ((i++ % 1000) == 0) { - putc ('.'); - } - udelay (1000); /* 1 ms */ - miiphy_read (dev->name, reg, MII_BMSR, ®_short); - - } - puts (" done\n"); - udelay (500000); /* another 500 ms (results in faster booting) */ - } - - speed = miiphy_speed (dev->name, reg); - duplex = miiphy_duplex (dev->name, reg); - - printf ("ENET Speed is %d Mbps - %s duplex connection\n", - (int) speed, (duplex == HALF) ? "HALF" : "FULL"); - - port_private->eth_running = MAGIC_ETH_RUNNING; - return 1; -} - -static int mv64460_eth_free_tx_rings (struct eth_device *dev) -{ - unsigned int queue; - ETH_PORT_INFO *ethernet_private; - struct mv64460_eth_priv *port_private; - unsigned int port_num; - volatile ETH_TX_DESC *p_tx_curr_desc; - - ethernet_private = (ETH_PORT_INFO *) dev->priv; - port_private = - (struct mv64460_eth_priv *) ethernet_private->port_private; - port_num = port_private->port_num; - - /* Stop Tx Queues */ - MV_REG_WRITE (MV64460_ETH_TRANSMIT_QUEUE_COMMAND_REG (port_num), - 0x0000ff00); - - /* Free TX rings */ - DP (printf ("Clearing previously allocated TX queues... ")); - for (queue = 0; queue < MV64460_TX_QUEUE_NUM; queue++) { - /* Free on TX rings */ - for (p_tx_curr_desc = - ethernet_private->p_tx_desc_area_base[queue]; - ((unsigned int) p_tx_curr_desc <= (unsigned int) - ethernet_private->p_tx_desc_area_base[queue] + - ethernet_private->tx_desc_area_size[queue]); - p_tx_curr_desc = - (ETH_TX_DESC *) ((unsigned int) p_tx_curr_desc + - TX_DESC_ALIGNED_SIZE)) { - /* this is inside for loop */ - if (p_tx_curr_desc->return_info != 0) { - p_tx_curr_desc->return_info = 0; - DP (printf ("freed\n")); - } - } - DP (printf ("Done\n")); - } - return 0; -} - -static int mv64460_eth_free_rx_rings (struct eth_device *dev) -{ - unsigned int queue; - ETH_PORT_INFO *ethernet_private; - struct mv64460_eth_priv *port_private; - unsigned int port_num; - volatile ETH_RX_DESC *p_rx_curr_desc; - - ethernet_private = (ETH_PORT_INFO *) dev->priv; - port_private = - (struct mv64460_eth_priv *) ethernet_private->port_private; - port_num = port_private->port_num; - - /* Stop RX Queues */ - MV_REG_WRITE (MV64460_ETH_RECEIVE_QUEUE_COMMAND_REG (port_num), - 0x0000ff00); - - /* Free RX rings */ - DP (printf ("Clearing previously allocated RX queues... ")); - for (queue = 0; queue < MV64460_RX_QUEUE_NUM; queue++) { - /* Free preallocated skb's on RX rings */ - for (p_rx_curr_desc = - ethernet_private->p_rx_desc_area_base[queue]; - (((unsigned int) p_rx_curr_desc < - ((unsigned int) ethernet_private-> - p_rx_desc_area_base[queue] + - ethernet_private->rx_desc_area_size[queue]))); - p_rx_curr_desc = - (ETH_RX_DESC *) ((unsigned int) p_rx_curr_desc + - RX_DESC_ALIGNED_SIZE)) { - if (p_rx_curr_desc->return_info != 0) { - p_rx_curr_desc->return_info = 0; - DP (printf ("freed\n")); - } - } - DP (printf ("Done\n")); - } - return 0; -} - -/********************************************************************** - * mv64460_eth_stop - * - * This function is used when closing the network device. - * It updates the hardware, - * release all memory that holds buffers and descriptors and release the IRQ. - * Input : a pointer to the device structure - * Output : zero if success , nonzero if fails - *********************************************************************/ - -int mv64460_eth_stop (struct eth_device *dev) -{ - /* Disable all gigE address decoder */ - MV_REG_WRITE (MV64460_ETH_BASE_ADDR_ENABLE_REG, 0x3f); - DP (printf ("%s Ethernet stop called ... \n", __FUNCTION__)); - mv64460_eth_real_stop (dev); - - return 0; -}; - -/* Helper function for mv64460_eth_stop */ - -static int mv64460_eth_real_stop (struct eth_device *dev) -{ - ETH_PORT_INFO *ethernet_private; - struct mv64460_eth_priv *port_private; - unsigned int port_num; - - ethernet_private = (ETH_PORT_INFO *) dev->priv; - port_private = - (struct mv64460_eth_priv *) ethernet_private->port_private; - port_num = port_private->port_num; - - mv64460_eth_free_tx_rings (dev); - mv64460_eth_free_rx_rings (dev); - - eth_port_reset (ethernet_private->port_num); - /* Disable ethernet port interrupts */ - MV_REG_WRITE (MV64460_ETH_INTERRUPT_CAUSE_REG (port_num), 0); - MV_REG_WRITE (MV64460_ETH_INTERRUPT_CAUSE_EXTEND_REG (port_num), 0); - /* Mask RX buffer and TX end interrupt */ - MV_REG_WRITE (MV64460_ETH_INTERRUPT_MASK_REG (port_num), 0); - /* Mask phy and link status changes interrupts */ - MV_REG_WRITE (MV64460_ETH_INTERRUPT_EXTEND_MASK_REG (port_num), 0); - MV_RESET_REG_BITS (MV64460_CPU_INTERRUPT0_MASK_HIGH, - BIT0 << port_num); - /* Print Network statistics */ -#ifndef UPDATE_STATS_BY_SOFTWARE - /* - * Print statistics (only if ethernet is running), - * then zero all the stats fields in memory - */ - if (port_private->eth_running == MAGIC_ETH_RUNNING) { - port_private->eth_running = 0; - mv64460_eth_print_stat (dev); - } - memset (port_private->stats, 0, sizeof (struct net_device_stats)); -#endif - DP (printf ("\nEthernet stopped ... \n")); - return 0; -} - -/********************************************************************** - * mv64460_eth_start_xmit - * - * This function is queues a packet in the Tx descriptor for - * required port. - * - * Input : skb - a pointer to socket buffer - * dev - a pointer to the required port - * - * Output : zero upon success - **********************************************************************/ - -int mv64460_eth_xmit (struct eth_device *dev, volatile void *dataPtr, - int dataSize) -{ - ETH_PORT_INFO *ethernet_private; - struct mv64460_eth_priv *port_private; - PKT_INFO pkt_info; - ETH_FUNC_RET_STATUS status; - struct net_device_stats *stats; - ETH_FUNC_RET_STATUS release_result; - - ethernet_private = (ETH_PORT_INFO *) dev->priv; - port_private = - (struct mv64460_eth_priv *) ethernet_private->port_private; - - stats = port_private->stats; - - /* Update packet info data structure */ - pkt_info.cmd_sts = ETH_TX_FIRST_DESC | ETH_TX_LAST_DESC; /* DMA owned, first last */ - pkt_info.byte_cnt = dataSize; - pkt_info.buf_ptr = (unsigned int) dataPtr; - pkt_info.return_info = 0; - - status = eth_port_send (ethernet_private, ETH_Q0, &pkt_info); - if ((status == ETH_ERROR) || (status == ETH_QUEUE_FULL)) { - printf ("Error on transmitting packet .."); - if (status == ETH_QUEUE_FULL) - printf ("ETH Queue is full. \n"); - if (status == ETH_QUEUE_LAST_RESOURCE) - printf ("ETH Queue: using last available resource. \n"); - return 1; - } - - /* Update statistics and start of transmittion time */ - stats->tx_bytes += dataSize; - stats->tx_packets++; - - /* Check if packet(s) is(are) transmitted correctly (release everything) */ - do { - release_result = - eth_tx_return_desc (ethernet_private, ETH_Q0, - &pkt_info); - switch (release_result) { - case ETH_OK: - DP (printf ("descriptor released\n")); - if (pkt_info.cmd_sts & BIT0) { - printf ("Error in TX\n"); - stats->tx_errors++; - } - break; - case ETH_RETRY: - DP (printf ("transmission still in process\n")); - break; - - case ETH_ERROR: - printf ("routine can not access Tx desc ring\n"); - break; - - case ETH_END_OF_JOB: - DP (printf ("the routine has nothing to release\n")); - break; - default: /* should not happen */ - break; - } - } while (release_result == ETH_OK); - - return 0; /* success */ -} - -/********************************************************************** - * mv64460_eth_receive - * - * This function is forward packets that are received from the port's - * queues toward kernel core or FastRoute them to another interface. - * - * Input : dev - a pointer to the required interface - * max - maximum number to receive (0 means unlimted) - * - * Output : number of served packets - **********************************************************************/ - -int mv64460_eth_receive (struct eth_device *dev) -{ - ETH_PORT_INFO *ethernet_private; - struct mv64460_eth_priv *port_private; - PKT_INFO pkt_info; - struct net_device_stats *stats; - - ethernet_private = (ETH_PORT_INFO *) dev->priv; - port_private = (struct mv64460_eth_priv *) ethernet_private->port_private; - stats = port_private->stats; - - while ((eth_port_receive (ethernet_private, ETH_Q0, &pkt_info) == ETH_OK)) { -#ifdef DEBUG_MV_ETH - if (pkt_info.byte_cnt != 0) { - printf ("%s: Received %d byte Packet @ 0x%x\n", - __FUNCTION__, pkt_info.byte_cnt, - pkt_info.buf_ptr); - if(pkt_info.buf_ptr != 0){ - for(i=0; i < pkt_info.byte_cnt; i++){ - if((i % 4) == 0){ - printf("\n0x"); - } - printf("%02x", ((char*)pkt_info.buf_ptr)[i]); - } - printf("\n"); - } - } -#endif - /* Update statistics. Note byte count includes 4 byte CRC count */ - stats->rx_packets++; - stats->rx_bytes += pkt_info.byte_cnt; - - /* - * In case received a packet without first / last bits on OR the error - * summary bit is on, the packets needs to be dropeed. - */ - if (((pkt_info. - cmd_sts & (ETH_RX_FIRST_DESC | ETH_RX_LAST_DESC)) != - (ETH_RX_FIRST_DESC | ETH_RX_LAST_DESC)) - || (pkt_info.cmd_sts & ETH_ERROR_SUMMARY)) { - stats->rx_dropped++; - - printf ("Received packet spread on multiple descriptors\n"); - - /* Is this caused by an error ? */ - if (pkt_info.cmd_sts & ETH_ERROR_SUMMARY) { - stats->rx_errors++; - } - - /* free these descriptors again without forwarding them to the higher layers */ - pkt_info.buf_ptr &= ~0x7; /* realign buffer again */ - pkt_info.byte_cnt = 0x0000; /* Reset Byte count */ - - if (eth_rx_return_buff - (ethernet_private, ETH_Q0, &pkt_info) != ETH_OK) { - printf ("Error while returning the RX Desc to Ring\n"); - } else { - DP (printf ("RX Desc returned to Ring\n")); - } - /* /free these descriptors again */ - } else { - -/* !!! call higher layer processing */ -#ifdef DEBUG_MV_ETH - printf ("\nNow send it to upper layer protocols (NetReceive) ...\n"); -#endif - /* let the upper layer handle the packet */ - NetReceive ((uchar *) pkt_info.buf_ptr, - (int) pkt_info.byte_cnt); - -/* **************************************************************** */ -/* free descriptor */ - pkt_info.buf_ptr &= ~0x7; /* realign buffer again */ - pkt_info.byte_cnt = 0x0000; /* Reset Byte count */ - DP (printf ("RX: pkt_info.buf_ptr = %x\n", pkt_info.buf_ptr)); - if (eth_rx_return_buff - (ethernet_private, ETH_Q0, &pkt_info) != ETH_OK) { - printf ("Error while returning the RX Desc to Ring\n"); - } else { - DP (printf ("RX: Desc returned to Ring\n")); - } - -/* **************************************************************** */ - - } - } - mv64460_eth_get_stats (dev); /* update statistics */ - return 1; -} - -/********************************************************************** - * mv64460_eth_get_stats - * - * Returns a pointer to the interface statistics. - * - * Input : dev - a pointer to the required interface - * - * Output : a pointer to the interface's statistics - **********************************************************************/ - -static struct net_device_stats *mv64460_eth_get_stats (struct eth_device *dev) -{ - ETH_PORT_INFO *ethernet_private; - struct mv64460_eth_priv *port_private; - - ethernet_private = (ETH_PORT_INFO *) dev->priv; - port_private = - (struct mv64460_eth_priv *) ethernet_private->port_private; - - mv64460_eth_update_stat (dev); - - return port_private->stats; -} - -/********************************************************************** - * mv64460_eth_update_stat - * - * Update the statistics structure in the private data structure - * - * Input : pointer to ethernet interface network device structure - * Output : N/A - **********************************************************************/ - -static void mv64460_eth_update_stat (struct eth_device *dev) -{ - ETH_PORT_INFO *ethernet_private; - struct mv64460_eth_priv *port_private; - struct net_device_stats *stats; - - ethernet_private = (ETH_PORT_INFO *) dev->priv; - port_private = - (struct mv64460_eth_priv *) ethernet_private->port_private; - stats = port_private->stats; - - /* These are false updates */ - stats->rx_packets += (unsigned long) - eth_read_mib_counter (ethernet_private->port_num, - ETH_MIB_GOOD_FRAMES_RECEIVED); - stats->tx_packets += (unsigned long) - eth_read_mib_counter (ethernet_private->port_num, - ETH_MIB_GOOD_FRAMES_SENT); - stats->rx_bytes += (unsigned long) - eth_read_mib_counter (ethernet_private->port_num, - ETH_MIB_GOOD_OCTETS_RECEIVED_LOW); - /* - * Ideally this should be as follows - - * - * stats->rx_bytes += stats->rx_bytes + - * ((unsigned long) ethReadMibCounter (ethernet_private->port_num , - * ETH_MIB_GOOD_OCTETS_RECEIVED_HIGH) << 32); - * - * But the unsigned long in PowerPC and MIPS are 32bit. So the next read - * is just a dummy read for proper work of the GigE port - */ - (void)eth_read_mib_counter (ethernet_private->port_num, - ETH_MIB_GOOD_OCTETS_RECEIVED_HIGH); - stats->tx_bytes += (unsigned long) - eth_read_mib_counter (ethernet_private->port_num, - ETH_MIB_GOOD_OCTETS_SENT_LOW); - (void)eth_read_mib_counter (ethernet_private->port_num, - ETH_MIB_GOOD_OCTETS_SENT_HIGH); - stats->rx_errors += (unsigned long) - eth_read_mib_counter (ethernet_private->port_num, - ETH_MIB_MAC_RECEIVE_ERROR); - - /* Rx dropped is for received packet with CRC error */ - stats->rx_dropped += - (unsigned long) eth_read_mib_counter (ethernet_private-> - port_num, - ETH_MIB_BAD_CRC_EVENT); - stats->multicast += (unsigned long) - eth_read_mib_counter (ethernet_private->port_num, - ETH_MIB_MULTICAST_FRAMES_RECEIVED); - stats->collisions += - (unsigned long) eth_read_mib_counter (ethernet_private-> - port_num, - ETH_MIB_COLLISION) + - (unsigned long) eth_read_mib_counter (ethernet_private-> - port_num, - ETH_MIB_LATE_COLLISION); - /* detailed rx errors */ - stats->rx_length_errors += - (unsigned long) eth_read_mib_counter (ethernet_private-> - port_num, - ETH_MIB_UNDERSIZE_RECEIVED) - + - (unsigned long) eth_read_mib_counter (ethernet_private-> - port_num, - ETH_MIB_OVERSIZE_RECEIVED); - /* detailed tx errors */ -} - -#ifndef UPDATE_STATS_BY_SOFTWARE -/********************************************************************** - * mv64460_eth_print_stat - * - * Update the statistics structure in the private data structure - * - * Input : pointer to ethernet interface network device structure - * Output : N/A - **********************************************************************/ - -static void mv64460_eth_print_stat (struct eth_device *dev) -{ - ETH_PORT_INFO *ethernet_private; - struct mv64460_eth_priv *port_private; - struct net_device_stats *stats; - - ethernet_private = (ETH_PORT_INFO *) dev->priv; - port_private = - (struct mv64460_eth_priv *) ethernet_private->port_private; - stats = port_private->stats; - - /* These are false updates */ - printf ("\n### Network statistics: ###\n"); - printf ("--------------------------\n"); - printf (" Packets received: %ld\n", stats->rx_packets); - printf (" Packets send: %ld\n", stats->tx_packets); - printf (" Received bytes: %ld\n", stats->rx_bytes); - printf (" Send bytes: %ld\n", stats->tx_bytes); - if (stats->rx_errors != 0) - printf (" Rx Errors: %ld\n", - stats->rx_errors); - if (stats->rx_dropped != 0) - printf (" Rx dropped (CRC Errors): %ld\n", - stats->rx_dropped); - if (stats->multicast != 0) - printf (" Rx mulicast frames: %ld\n", - stats->multicast); - if (stats->collisions != 0) - printf (" No. of collisions: %ld\n", - stats->collisions); - if (stats->rx_length_errors != 0) - printf (" Rx length errors: %ld\n", - stats->rx_length_errors); -} -#endif - -/************************************************************************** - *network_start - Network Kick Off Routine UBoot - *Inputs : - *Outputs : - **************************************************************************/ - -bool db64460_eth_start (struct eth_device *dev) -{ - return (mv64460_eth_open (dev)); /* calls real open */ -} - -/************************************************************************* -************************************************************************** -************************************************************************** -* The second part is the low level driver of the gigE ethernet ports. * -************************************************************************** -************************************************************************** -*************************************************************************/ -/* - * based on Linux code - * arch/powerpc/galileo/EVB64460/mv64460_eth.c - Driver for MV64460X ethernet ports - * Copyright (C) 2002 rabeeh@galileo.co.il - - * SPDX-License-Identifier: GPL-2.0+ - */ - -/******************************************************************************** - * Marvell's Gigabit Ethernet controller low level driver - * - * DESCRIPTION: - * This file introduce low level API to Marvell's Gigabit Ethernet - * controller. This Gigabit Ethernet Controller driver API controls - * 1) Operations (i.e. port init, start, reset etc'). - * 2) Data flow (i.e. port send, receive etc'). - * Each Gigabit Ethernet port is controlled via ETH_PORT_INFO - * struct. - * This struct includes user configuration information as well as - * driver internal data needed for its operations. - * - * Supported Features: - * - This low level driver is OS independent. Allocating memory for - * the descriptor rings and buffers are not within the scope of - * this driver. - * - The user is free from Rx/Tx queue managing. - * - This low level driver introduce functionality API that enable - * the to operate Marvell's Gigabit Ethernet Controller in a - * convenient way. - * - Simple Gigabit Ethernet port operation API. - * - Simple Gigabit Ethernet port data flow API. - * - Data flow and operation API support per queue functionality. - * - Support cached descriptors for better performance. - * - Enable access to all four DRAM banks and internal SRAM memory - * spaces. - * - PHY access and control API. - * - Port control register configuration API. - * - Full control over Unicast and Multicast MAC configurations. - * - * Operation flow: - * - * Initialization phase - * This phase complete the initialization of the ETH_PORT_INFO - * struct. - * User information regarding port configuration has to be set - * prior to calling the port initialization routine. For example, - * the user has to assign the port_phy_addr field which is board - * depended parameter. - * In this phase any port Tx/Rx activity is halted, MIB counters - * are cleared, PHY address is set according to user parameter and - * access to DRAM and internal SRAM memory spaces. - * - * Driver ring initialization - * Allocating memory for the descriptor rings and buffers is not - * within the scope of this driver. Thus, the user is required to - * allocate memory for the descriptors ring and buffers. Those - * memory parameters are used by the Rx and Tx ring initialization - * routines in order to curve the descriptor linked list in a form - * of a ring. - * Note: Pay special attention to alignment issues when using - * cached descriptors/buffers. In this phase the driver store - * information in the ETH_PORT_INFO struct regarding each queue - * ring. - * - * Driver start - * This phase prepares the Ethernet port for Rx and Tx activity. - * It uses the information stored in the ETH_PORT_INFO struct to - * initialize the various port registers. - * - * Data flow: - * All packet references to/from the driver are done using PKT_INFO - * struct. - * This struct is a unified struct used with Rx and Tx operations. - * This way the user is not required to be familiar with neither - * Tx nor Rx descriptors structures. - * The driver's descriptors rings are management by indexes. - * Those indexes controls the ring resources and used to indicate - * a SW resource error: - * 'current' - * This index points to the current available resource for use. For - * example in Rx process this index will point to the descriptor - * that will be passed to the user upon calling the receive routine. - * In Tx process, this index will point to the descriptor - * that will be assigned with the user packet info and transmitted. - * 'used' - * This index points to the descriptor that need to restore its - * resources. For example in Rx process, using the Rx buffer return - * API will attach the buffer returned in packet info to the - * descriptor pointed by 'used'. In Tx process, using the Tx - * descriptor return will merely return the user packet info with - * the command status of the transmitted buffer pointed by the - * 'used' index. Nevertheless, it is essential to use this routine - * to update the 'used' index. - * 'first' - * This index supports Tx Scatter-Gather. It points to the first - * descriptor of a packet assembled of multiple buffers. For example - * when in middle of Such packet we have a Tx resource error the - * 'curr' index get the value of 'first' to indicate that the ring - * returned to its state before trying to transmit this packet. - * - * Receive operation: - * The eth_port_receive API set the packet information struct, - * passed by the caller, with received information from the - * 'current' SDMA descriptor. - * It is the user responsibility to return this resource back - * to the Rx descriptor ring to enable the reuse of this source. - * Return Rx resource is done using the eth_rx_return_buff API. - * - * Transmit operation: - * The eth_port_send API supports Scatter-Gather which enables to - * send a packet spanned over multiple buffers. This means that - * for each packet info structure given by the user and put into - * the Tx descriptors ring, will be transmitted only if the 'LAST' - * bit will be set in the packet info command status field. This - * API also consider restriction regarding buffer alignments and - * sizes. - * The user must return a Tx resource after ensuring the buffer - * has been transmitted to enable the Tx ring indexes to update. - * - * BOARD LAYOUT - * This device is on-board. No jumper diagram is necessary. - * - * EXTERNAL INTERFACE - * - * Prior to calling the initialization routine eth_port_init() the user - * must set the following fields under ETH_PORT_INFO struct: - * port_num User Ethernet port number. - * port_phy_addr User PHY address of Ethernet port. - * port_mac_addr[6] User defined port MAC address. - * port_config User port configuration value. - * port_config_extend User port config extend value. - * port_sdma_config User port SDMA config value. - * port_serial_control User port serial control value. - * *port_virt_to_phys () User function to cast virtual addr to CPU bus addr. - * *port_private User scratch pad for user specific data structures. - * - * This driver introduce a set of default values: - * PORT_CONFIG_VALUE Default port configuration value - * PORT_CONFIG_EXTEND_VALUE Default port extend configuration value - * PORT_SDMA_CONFIG_VALUE Default sdma control value - * PORT_SERIAL_CONTROL_VALUE Default port serial control value - * - * This driver data flow is done using the PKT_INFO struct which is - * a unified struct for Rx and Tx operations: - * byte_cnt Tx/Rx descriptor buffer byte count. - * l4i_chk CPU provided TCP Checksum. For Tx operation only. - * cmd_sts Tx/Rx descriptor command status. - * buf_ptr Tx/Rx descriptor buffer pointer. - * return_info Tx/Rx user resource return information. - * - * - * EXTERNAL SUPPORT REQUIREMENTS - * - * This driver requires the following external support: - * - * D_CACHE_FLUSH_LINE (address, address offset) - * - * This macro applies assembly code to flush and invalidate cache - * line. - * address - address base. - * address offset - address offset - * - * - * CPU_PIPE_FLUSH - * - * This macro applies assembly code to flush the CPU pipeline. - * - *******************************************************************************/ -/* includes */ - -/* defines */ -/* SDMA command macros */ -#define ETH_ENABLE_TX_QUEUE(tx_queue, eth_port) \ - MV_REG_WRITE(MV64460_ETH_TRANSMIT_QUEUE_COMMAND_REG(eth_port), (1 << tx_queue)) - -#define ETH_DISABLE_TX_QUEUE(tx_queue, eth_port) \ - MV_REG_WRITE(MV64460_ETH_TRANSMIT_QUEUE_COMMAND_REG(eth_port),\ - (1 << (8 + tx_queue))) - -#define ETH_ENABLE_RX_QUEUE(rx_queue, eth_port) \ -MV_REG_WRITE(MV64460_ETH_RECEIVE_QUEUE_COMMAND_REG(eth_port), (1 << rx_queue)) - -#define ETH_DISABLE_RX_QUEUE(rx_queue, eth_port) \ -MV_REG_WRITE(MV64460_ETH_RECEIVE_QUEUE_COMMAND_REG(eth_port), (1 << (8 + rx_queue))) - -#define CURR_RFD_GET(p_curr_desc, queue) \ - ((p_curr_desc) = p_eth_port_ctrl->p_rx_curr_desc_q[queue]) - -#define CURR_RFD_SET(p_curr_desc, queue) \ - (p_eth_port_ctrl->p_rx_curr_desc_q[queue] = (p_curr_desc)) - -#define USED_RFD_GET(p_used_desc, queue) \ - ((p_used_desc) = p_eth_port_ctrl->p_rx_used_desc_q[queue]) - -#define USED_RFD_SET(p_used_desc, queue)\ -(p_eth_port_ctrl->p_rx_used_desc_q[queue] = (p_used_desc)) - - -#define CURR_TFD_GET(p_curr_desc, queue) \ - ((p_curr_desc) = p_eth_port_ctrl->p_tx_curr_desc_q[queue]) - -#define CURR_TFD_SET(p_curr_desc, queue) \ - (p_eth_port_ctrl->p_tx_curr_desc_q[queue] = (p_curr_desc)) - -#define USED_TFD_GET(p_used_desc, queue) \ - ((p_used_desc) = p_eth_port_ctrl->p_tx_used_desc_q[queue]) - -#define USED_TFD_SET(p_used_desc, queue) \ - (p_eth_port_ctrl->p_tx_used_desc_q[queue] = (p_used_desc)) - -#define FIRST_TFD_GET(p_first_desc, queue) \ - ((p_first_desc) = p_eth_port_ctrl->p_tx_first_desc_q[queue]) - -#define FIRST_TFD_SET(p_first_desc, queue) \ - (p_eth_port_ctrl->p_tx_first_desc_q[queue] = (p_first_desc)) - - -/* Macros that save access to desc in order to find next desc pointer */ -#define RX_NEXT_DESC_PTR(p_rx_desc, queue) (ETH_RX_DESC*)(((((unsigned int)p_rx_desc - (unsigned int)p_eth_port_ctrl->p_rx_desc_area_base[queue]) + RX_DESC_ALIGNED_SIZE) % p_eth_port_ctrl->rx_desc_area_size[queue]) + (unsigned int)p_eth_port_ctrl->p_rx_desc_area_base[queue]) - -#define TX_NEXT_DESC_PTR(p_tx_desc, queue) (ETH_TX_DESC*)(((((unsigned int)p_tx_desc - (unsigned int)p_eth_port_ctrl->p_tx_desc_area_base[queue]) + TX_DESC_ALIGNED_SIZE) % p_eth_port_ctrl->tx_desc_area_size[queue]) + (unsigned int)p_eth_port_ctrl->p_tx_desc_area_base[queue]) - -#define LINK_UP_TIMEOUT 100000 -#define PHY_BUSY_TIMEOUT 10000000 - -/* locals */ - -/* PHY routines */ -static void ethernet_phy_set (ETH_PORT eth_port_num, int phy_addr); -static int ethernet_phy_get (ETH_PORT eth_port_num); - -/* Ethernet Port routines */ -static void eth_set_access_control (ETH_PORT eth_port_num, - ETH_WIN_PARAM * param); -static bool eth_port_uc_addr (ETH_PORT eth_port_num, unsigned char uc_nibble, - ETH_QUEUE queue, int option); -#if 0 /* FIXME */ -static bool eth_port_smc_addr (ETH_PORT eth_port_num, - unsigned char mc_byte, - ETH_QUEUE queue, int option); -static bool eth_port_omc_addr (ETH_PORT eth_port_num, - unsigned char crc8, - ETH_QUEUE queue, int option); -#endif - -static void eth_b_copy (unsigned int src_addr, unsigned int dst_addr, - int byte_count); - -void eth_dbg (ETH_PORT_INFO * p_eth_port_ctrl); - - -typedef enum _memory_bank { BANK0, BANK1, BANK2, BANK3 } MEMORY_BANK; -u32 mv_get_dram_bank_base_addr (MEMORY_BANK bank) -{ - u32 result = 0; - u32 enable = MV_REG_READ (MV64460_BASE_ADDR_ENABLE); - - if (enable & (1 << bank)) - return 0; - if (bank == BANK0) - result = MV_REG_READ (MV64460_CS_0_BASE_ADDR); - if (bank == BANK1) - result = MV_REG_READ (MV64460_CS_1_BASE_ADDR); - if (bank == BANK2) - result = MV_REG_READ (MV64460_CS_2_BASE_ADDR); - if (bank == BANK3) - result = MV_REG_READ (MV64460_CS_3_BASE_ADDR); - result &= 0x0000ffff; - result = result << 16; - return result; -} - -u32 mv_get_dram_bank_size (MEMORY_BANK bank) -{ - u32 result = 0; - u32 enable = MV_REG_READ (MV64460_BASE_ADDR_ENABLE); - - if (enable & (1 << bank)) - return 0; - if (bank == BANK0) - result = MV_REG_READ (MV64460_CS_0_SIZE); - if (bank == BANK1) - result = MV_REG_READ (MV64460_CS_1_SIZE); - if (bank == BANK2) - result = MV_REG_READ (MV64460_CS_2_SIZE); - if (bank == BANK3) - result = MV_REG_READ (MV64460_CS_3_SIZE); - result += 1; - result &= 0x0000ffff; - result = result << 16; - return result; -} - -u32 mv_get_internal_sram_base (void) -{ - u32 result; - - result = MV_REG_READ (MV64460_INTEGRATED_SRAM_BASE_ADDR); - result &= 0x0000ffff; - result = result << 16; - return result; -} - -/******************************************************************************* -* eth_port_init - Initialize the Ethernet port driver -* -* DESCRIPTION: -* This function prepares the ethernet port to start its activity: -* 1) Completes the ethernet port driver struct initialization toward port -* start routine. -* 2) Resets the device to a quiescent state in case of warm reboot. -* 3) Enable SDMA access to all four DRAM banks as well as internal SRAM. -* 4) Clean MAC tables. The reset status of those tables is unknown. -* 5) Set PHY address. -* Note: Call this routine prior to eth_port_start routine and after setting -* user values in the user fields of Ethernet port control struct (i.e. -* port_phy_addr). -* -* INPUT: -* ETH_PORT_INFO *p_eth_port_ctrl Ethernet port control struct -* -* OUTPUT: -* See description. -* -* RETURN: -* None. -* -*******************************************************************************/ -static void eth_port_init (ETH_PORT_INFO * p_eth_port_ctrl) -{ - int queue; - ETH_WIN_PARAM win_param; - - p_eth_port_ctrl->port_config = PORT_CONFIG_VALUE; - p_eth_port_ctrl->port_config_extend = PORT_CONFIG_EXTEND_VALUE; - p_eth_port_ctrl->port_sdma_config = PORT_SDMA_CONFIG_VALUE; - p_eth_port_ctrl->port_serial_control = PORT_SERIAL_CONTROL_VALUE; - - p_eth_port_ctrl->port_rx_queue_command = 0; - p_eth_port_ctrl->port_tx_queue_command = 0; - - /* Zero out SW structs */ - for (queue = 0; queue < MAX_RX_QUEUE_NUM; queue++) { - CURR_RFD_SET ((ETH_RX_DESC *) 0x00000000, queue); - USED_RFD_SET ((ETH_RX_DESC *) 0x00000000, queue); - p_eth_port_ctrl->rx_resource_err[queue] = false; - } - - for (queue = 0; queue < MAX_TX_QUEUE_NUM; queue++) { - CURR_TFD_SET ((ETH_TX_DESC *) 0x00000000, queue); - USED_TFD_SET ((ETH_TX_DESC *) 0x00000000, queue); - FIRST_TFD_SET ((ETH_TX_DESC *) 0x00000000, queue); - p_eth_port_ctrl->tx_resource_err[queue] = false; - } - - eth_port_reset (p_eth_port_ctrl->port_num); - - /* Set access parameters for DRAM bank 0 */ - win_param.win = ETH_WIN0; /* Use Ethernet window 0 */ - win_param.target = ETH_TARGET_DRAM; /* Window target - DDR */ - win_param.attributes = EBAR_ATTR_DRAM_CS0; /* Enable DRAM bank */ -#ifndef CONFIG_NOT_COHERENT_CACHE - win_param.attributes |= EBAR_ATTR_DRAM_CACHE_COHERENCY_WB; -#endif - win_param.high_addr = 0; - /* Get bank base */ - win_param.base_addr = mv_get_dram_bank_base_addr (BANK0); - win_param.size = mv_get_dram_bank_size (BANK0); /* Get bank size */ - if (win_param.size == 0) - win_param.enable = 0; - else - win_param.enable = 1; /* Enable the access */ - win_param.access_ctrl = EWIN_ACCESS_FULL; /* Enable full access */ - - /* Set the access control for address window (EPAPR) READ & WRITE */ - eth_set_access_control (p_eth_port_ctrl->port_num, &win_param); - - /* Set access parameters for DRAM bank 1 */ - win_param.win = ETH_WIN1; /* Use Ethernet window 1 */ - win_param.target = ETH_TARGET_DRAM; /* Window target - DDR */ - win_param.attributes = EBAR_ATTR_DRAM_CS1; /* Enable DRAM bank */ -#ifndef CONFIG_NOT_COHERENT_CACHE - win_param.attributes |= EBAR_ATTR_DRAM_CACHE_COHERENCY_WB; -#endif - win_param.high_addr = 0; - /* Get bank base */ - win_param.base_addr = mv_get_dram_bank_base_addr (BANK1); - win_param.size = mv_get_dram_bank_size (BANK1); /* Get bank size */ - if (win_param.size == 0) - win_param.enable = 0; - else - win_param.enable = 1; /* Enable the access */ - win_param.access_ctrl = EWIN_ACCESS_FULL; /* Enable full access */ - - /* Set the access control for address window (EPAPR) READ & WRITE */ - eth_set_access_control (p_eth_port_ctrl->port_num, &win_param); - - /* Set access parameters for DRAM bank 2 */ - win_param.win = ETH_WIN2; /* Use Ethernet window 2 */ - win_param.target = ETH_TARGET_DRAM; /* Window target - DDR */ - win_param.attributes = EBAR_ATTR_DRAM_CS2; /* Enable DRAM bank */ -#ifndef CONFIG_NOT_COHERENT_CACHE - win_param.attributes |= EBAR_ATTR_DRAM_CACHE_COHERENCY_WB; -#endif - win_param.high_addr = 0; - /* Get bank base */ - win_param.base_addr = mv_get_dram_bank_base_addr (BANK2); - win_param.size = mv_get_dram_bank_size (BANK2); /* Get bank size */ - if (win_param.size == 0) - win_param.enable = 0; - else - win_param.enable = 1; /* Enable the access */ - win_param.access_ctrl = EWIN_ACCESS_FULL; /* Enable full access */ - - /* Set the access control for address window (EPAPR) READ & WRITE */ - eth_set_access_control (p_eth_port_ctrl->port_num, &win_param); - - /* Set access parameters for DRAM bank 3 */ - win_param.win = ETH_WIN3; /* Use Ethernet window 3 */ - win_param.target = ETH_TARGET_DRAM; /* Window target - DDR */ - win_param.attributes = EBAR_ATTR_DRAM_CS3; /* Enable DRAM bank */ -#ifndef CONFIG_NOT_COHERENT_CACHE - win_param.attributes |= EBAR_ATTR_DRAM_CACHE_COHERENCY_WB; -#endif - win_param.high_addr = 0; - /* Get bank base */ - win_param.base_addr = mv_get_dram_bank_base_addr (BANK3); - win_param.size = mv_get_dram_bank_size (BANK3); /* Get bank size */ - if (win_param.size == 0) - win_param.enable = 0; - else - win_param.enable = 1; /* Enable the access */ - win_param.access_ctrl = EWIN_ACCESS_FULL; /* Enable full access */ - - /* Set the access control for address window (EPAPR) READ & WRITE */ - eth_set_access_control (p_eth_port_ctrl->port_num, &win_param); - - /* Set access parameters for Internal SRAM */ - win_param.win = ETH_WIN4; /* Use Ethernet window 0 */ - win_param.target = EBAR_TARGET_CBS; /* Target - Internal SRAM */ - win_param.attributes = EBAR_ATTR_CBS_SRAM | EBAR_ATTR_CBS_SRAM_BLOCK0; - win_param.high_addr = 0; - win_param.base_addr = mv_get_internal_sram_base (); /* Get base addr */ - win_param.size = MV64460_INTERNAL_SRAM_SIZE; /* Get bank size */ - win_param.enable = 1; /* Enable the access */ - win_param.access_ctrl = EWIN_ACCESS_FULL; /* Enable full access */ - - /* Set the access control for address window (EPAPR) READ & WRITE */ - eth_set_access_control (p_eth_port_ctrl->port_num, &win_param); - - eth_port_init_mac_tables (p_eth_port_ctrl->port_num); - - ethernet_phy_set (p_eth_port_ctrl->port_num, - p_eth_port_ctrl->port_phy_addr); - - return; - -} - -/******************************************************************************* -* eth_port_start - Start the Ethernet port activity. -* -* DESCRIPTION: -* This routine prepares the Ethernet port for Rx and Tx activity: -* 1. Initialize Tx and Rx Current Descriptor Pointer for each queue that -* has been initialized a descriptor's ring (using ether_init_tx_desc_ring -* for Tx and ether_init_rx_desc_ring for Rx) -* 2. Initialize and enable the Ethernet configuration port by writing to -* the port's configuration and command registers. -* 3. Initialize and enable the SDMA by writing to the SDMA's -* configuration and command registers. -* After completing these steps, the ethernet port SDMA can starts to -* perform Rx and Tx activities. -* -* Note: Each Rx and Tx queue descriptor's list must be initialized prior -* to calling this function (use ether_init_tx_desc_ring for Tx queues and -* ether_init_rx_desc_ring for Rx queues). -* -* INPUT: -* ETH_PORT_INFO *p_eth_port_ctrl Ethernet port control struct -* -* OUTPUT: -* Ethernet port is ready to receive and transmit. -* -* RETURN: -* false if the port PHY is not up. -* true otherwise. -* -*******************************************************************************/ -static bool eth_port_start (ETH_PORT_INFO * p_eth_port_ctrl) -{ - int queue; - volatile ETH_TX_DESC *p_tx_curr_desc; - volatile ETH_RX_DESC *p_rx_curr_desc; - unsigned int phy_reg_data; - ETH_PORT eth_port_num = p_eth_port_ctrl->port_num; - - /* Assignment of Tx CTRP of given queue */ - for (queue = 0; queue < MAX_TX_QUEUE_NUM; queue++) { - CURR_TFD_GET (p_tx_curr_desc, queue); - MV_REG_WRITE ((MV64460_ETH_TX_CURRENT_QUEUE_DESC_PTR_0 - (eth_port_num) - + (4 * queue)), - ((unsigned int) p_tx_curr_desc)); - - } - - /* Assignment of Rx CRDP of given queue */ - for (queue = 0; queue < MAX_RX_QUEUE_NUM; queue++) { - CURR_RFD_GET (p_rx_curr_desc, queue); - MV_REG_WRITE ((MV64460_ETH_RX_CURRENT_QUEUE_DESC_PTR_0 - (eth_port_num) - + (4 * queue)), - ((unsigned int) p_rx_curr_desc)); - - if (p_rx_curr_desc != NULL) - /* Add the assigned Ethernet address to the port's address table */ - eth_port_uc_addr_set (p_eth_port_ctrl->port_num, - p_eth_port_ctrl->port_mac_addr, - queue); - } - - /* Assign port configuration and command. */ - MV_REG_WRITE (MV64460_ETH_PORT_CONFIG_REG (eth_port_num), - p_eth_port_ctrl->port_config); - - MV_REG_WRITE (MV64460_ETH_PORT_CONFIG_EXTEND_REG (eth_port_num), - p_eth_port_ctrl->port_config_extend); - - MV_REG_WRITE (MV64460_ETH_PORT_SERIAL_CONTROL_REG (eth_port_num), - p_eth_port_ctrl->port_serial_control); - - MV_SET_REG_BITS (MV64460_ETH_PORT_SERIAL_CONTROL_REG (eth_port_num), - ETH_SERIAL_PORT_ENABLE); - - /* Assign port SDMA configuration */ - MV_REG_WRITE (MV64460_ETH_SDMA_CONFIG_REG (eth_port_num), - p_eth_port_ctrl->port_sdma_config); - - MV_REG_WRITE (MV64460_ETH_TX_QUEUE_0_TOKEN_BUCKET_COUNT - (eth_port_num), 0x3fffffff); - MV_REG_WRITE (MV64460_ETH_TX_QUEUE_0_TOKEN_BUCKET_CONFIG - (eth_port_num), 0x03fffcff); - /* Turn off the port/queue bandwidth limitation */ - MV_REG_WRITE (MV64460_ETH_MAXIMUM_TRANSMIT_UNIT (eth_port_num), 0x0); - - /* Enable port Rx. */ - MV_REG_WRITE (MV64460_ETH_RECEIVE_QUEUE_COMMAND_REG (eth_port_num), - p_eth_port_ctrl->port_rx_queue_command); - - /* Check if link is up */ - eth_port_read_smi_reg (eth_port_num, 1, &phy_reg_data); - - if (!(phy_reg_data & 0x20)) - return false; - - return true; -} - -/******************************************************************************* -* eth_port_uc_addr_set - This function Set the port Unicast address. -* -* DESCRIPTION: -* This function Set the port Ethernet MAC address. -* -* INPUT: -* ETH_PORT eth_port_num Port number. -* char * p_addr Address to be set -* ETH_QUEUE queue Rx queue number for this MAC address. -* -* OUTPUT: -* Set MAC address low and high registers. also calls eth_port_uc_addr() -* To set the unicast table with the proper information. -* -* RETURN: -* N/A. -* -*******************************************************************************/ -static void eth_port_uc_addr_set (ETH_PORT eth_port_num, - unsigned char *p_addr, ETH_QUEUE queue) -{ - unsigned int mac_h; - unsigned int mac_l; - - mac_l = (p_addr[4] << 8) | (p_addr[5]); - mac_h = (p_addr[0] << 24) | (p_addr[1] << 16) | - (p_addr[2] << 8) | (p_addr[3] << 0); - - MV_REG_WRITE (MV64460_ETH_MAC_ADDR_LOW (eth_port_num), mac_l); - MV_REG_WRITE (MV64460_ETH_MAC_ADDR_HIGH (eth_port_num), mac_h); - - /* Accept frames of this address */ - eth_port_uc_addr (eth_port_num, p_addr[5], queue, ACCEPT_MAC_ADDR); - - return; -} - -/******************************************************************************* -* eth_port_uc_addr - This function Set the port unicast address table -* -* DESCRIPTION: -* This function locates the proper entry in the Unicast table for the -* specified MAC nibble and sets its properties according to function -* parameters. -* -* INPUT: -* ETH_PORT eth_port_num Port number. -* unsigned char uc_nibble Unicast MAC Address last nibble. -* ETH_QUEUE queue Rx queue number for this MAC address. -* int option 0 = Add, 1 = remove address. -* -* OUTPUT: -* This function add/removes MAC addresses from the port unicast address -* table. -* -* RETURN: -* true is output succeeded. -* false if option parameter is invalid. -* -*******************************************************************************/ -static bool eth_port_uc_addr (ETH_PORT eth_port_num, - unsigned char uc_nibble, - ETH_QUEUE queue, int option) -{ - unsigned int unicast_reg; - unsigned int tbl_offset; - unsigned int reg_offset; - - /* Locate the Unicast table entry */ - uc_nibble = (0xf & uc_nibble); - tbl_offset = (uc_nibble / 4) * 4; /* Register offset from unicast table base */ - reg_offset = uc_nibble % 4; /* Entry offset within the above register */ - - switch (option) { - case REJECT_MAC_ADDR: - /* Clear accepts frame bit at specified unicast DA table entry */ - unicast_reg = - MV_REG_READ ((MV64460_ETH_DA_FILTER_UNICAST_TABLE_BASE - (eth_port_num) - + tbl_offset)); - - unicast_reg &= (0x0E << (8 * reg_offset)); - - MV_REG_WRITE ((MV64460_ETH_DA_FILTER_UNICAST_TABLE_BASE - (eth_port_num) - + tbl_offset), unicast_reg); - break; - - case ACCEPT_MAC_ADDR: - /* Set accepts frame bit at unicast DA filter table entry */ - unicast_reg = - MV_REG_READ ((MV64460_ETH_DA_FILTER_UNICAST_TABLE_BASE - (eth_port_num) - + tbl_offset)); - - unicast_reg |= ((0x01 | queue) << (8 * reg_offset)); - - MV_REG_WRITE ((MV64460_ETH_DA_FILTER_UNICAST_TABLE_BASE - (eth_port_num) - + tbl_offset), unicast_reg); - - break; - - default: - return false; - } - return true; -} - -#if 0 /* FIXME */ -/******************************************************************************* -* eth_port_mc_addr - Multicast address settings. -* -* DESCRIPTION: -* This API controls the MV device MAC multicast support. -* The MV device supports multicast using two tables: -* 1) Special Multicast Table for MAC addresses of the form -* 0x01-00-5E-00-00-XX (where XX is between 0x00 and 0x_fF). -* The MAC DA[7:0] bits are used as a pointer to the Special Multicast -* Table entries in the DA-Filter table. -* In this case, the function calls eth_port_smc_addr() routine to set the -* Special Multicast Table. -* 2) Other Multicast Table for multicast of another type. A CRC-8bit -* is used as an index to the Other Multicast Table entries in the -* DA-Filter table. -* In this case, the function calculates the CRC-8bit value and calls -* eth_port_omc_addr() routine to set the Other Multicast Table. -* INPUT: -* ETH_PORT eth_port_num Port number. -* unsigned char *p_addr Unicast MAC Address. -* ETH_QUEUE queue Rx queue number for this MAC address. -* int option 0 = Add, 1 = remove address. -* -* OUTPUT: -* See description. -* -* RETURN: -* true is output succeeded. -* false if add_address_table_entry( ) failed. -* -*******************************************************************************/ -static void eth_port_mc_addr (ETH_PORT eth_port_num, - unsigned char *p_addr, - ETH_QUEUE queue, int option) -{ - unsigned int mac_h; - unsigned int mac_l; - unsigned char crc_result = 0; - int mac_array[48]; - int crc[8]; - int i; - - if ((p_addr[0] == 0x01) && - (p_addr[1] == 0x00) && - (p_addr[2] == 0x5E) && (p_addr[3] == 0x00) && (p_addr[4] == 0x00)) { - - eth_port_smc_addr (eth_port_num, p_addr[5], queue, option); - } else { - /* Calculate CRC-8 out of the given address */ - mac_h = (p_addr[0] << 8) | (p_addr[1]); - mac_l = (p_addr[2] << 24) | (p_addr[3] << 16) | - (p_addr[4] << 8) | (p_addr[5] << 0); - - for (i = 0; i < 32; i++) - mac_array[i] = (mac_l >> i) & 0x1; - for (i = 32; i < 48; i++) - mac_array[i] = (mac_h >> (i - 32)) & 0x1; - - crc[0] = mac_array[45] ^ mac_array[43] ^ mac_array[40] ^ - mac_array[39] ^ mac_array[35] ^ mac_array[34] ^ - mac_array[31] ^ mac_array[30] ^ mac_array[28] ^ - mac_array[23] ^ mac_array[21] ^ mac_array[19] ^ - mac_array[18] ^ mac_array[16] ^ mac_array[14] ^ - mac_array[12] ^ mac_array[8] ^ mac_array[7] ^ - mac_array[6] ^ mac_array[0]; - - crc[1] = mac_array[46] ^ mac_array[45] ^ mac_array[44] ^ - mac_array[43] ^ mac_array[41] ^ mac_array[39] ^ - mac_array[36] ^ mac_array[34] ^ mac_array[32] ^ - mac_array[30] ^ mac_array[29] ^ mac_array[28] ^ - mac_array[24] ^ mac_array[23] ^ mac_array[22] ^ - mac_array[21] ^ mac_array[20] ^ mac_array[18] ^ - mac_array[17] ^ mac_array[16] ^ mac_array[15] ^ - mac_array[14] ^ mac_array[13] ^ mac_array[12] ^ - mac_array[9] ^ mac_array[6] ^ mac_array[1] ^ - mac_array[0]; - - crc[2] = mac_array[47] ^ mac_array[46] ^ mac_array[44] ^ - mac_array[43] ^ mac_array[42] ^ mac_array[39] ^ - mac_array[37] ^ mac_array[34] ^ mac_array[33] ^ - mac_array[29] ^ mac_array[28] ^ mac_array[25] ^ - mac_array[24] ^ mac_array[22] ^ mac_array[17] ^ - mac_array[15] ^ mac_array[13] ^ mac_array[12] ^ - mac_array[10] ^ mac_array[8] ^ mac_array[6] ^ - mac_array[2] ^ mac_array[1] ^ mac_array[0]; - - crc[3] = mac_array[47] ^ mac_array[45] ^ mac_array[44] ^ - mac_array[43] ^ mac_array[40] ^ mac_array[38] ^ - mac_array[35] ^ mac_array[34] ^ mac_array[30] ^ - mac_array[29] ^ mac_array[26] ^ mac_array[25] ^ - mac_array[23] ^ mac_array[18] ^ mac_array[16] ^ - mac_array[14] ^ mac_array[13] ^ mac_array[11] ^ - mac_array[9] ^ mac_array[7] ^ mac_array[3] ^ - mac_array[2] ^ mac_array[1]; - - crc[4] = mac_array[46] ^ mac_array[45] ^ mac_array[44] ^ - mac_array[41] ^ mac_array[39] ^ mac_array[36] ^ - mac_array[35] ^ mac_array[31] ^ mac_array[30] ^ - mac_array[27] ^ mac_array[26] ^ mac_array[24] ^ - mac_array[19] ^ mac_array[17] ^ mac_array[15] ^ - mac_array[14] ^ mac_array[12] ^ mac_array[10] ^ - mac_array[8] ^ mac_array[4] ^ mac_array[3] ^ - mac_array[2]; - - crc[5] = mac_array[47] ^ mac_array[46] ^ mac_array[45] ^ - mac_array[42] ^ mac_array[40] ^ mac_array[37] ^ - mac_array[36] ^ mac_array[32] ^ mac_array[31] ^ - mac_array[28] ^ mac_array[27] ^ mac_array[25] ^ - mac_array[20] ^ mac_array[18] ^ mac_array[16] ^ - mac_array[15] ^ mac_array[13] ^ mac_array[11] ^ - mac_array[9] ^ mac_array[5] ^ mac_array[4] ^ - mac_array[3]; - - crc[6] = mac_array[47] ^ mac_array[46] ^ mac_array[43] ^ - mac_array[41] ^ mac_array[38] ^ mac_array[37] ^ - mac_array[33] ^ mac_array[32] ^ mac_array[29] ^ - mac_array[28] ^ mac_array[26] ^ mac_array[21] ^ - mac_array[19] ^ mac_array[17] ^ mac_array[16] ^ - mac_array[14] ^ mac_array[12] ^ mac_array[10] ^ - mac_array[6] ^ mac_array[5] ^ mac_array[4]; - - crc[7] = mac_array[47] ^ mac_array[44] ^ mac_array[42] ^ - mac_array[39] ^ mac_array[38] ^ mac_array[34] ^ - mac_array[33] ^ mac_array[30] ^ mac_array[29] ^ - mac_array[27] ^ mac_array[22] ^ mac_array[20] ^ - mac_array[18] ^ mac_array[17] ^ mac_array[15] ^ - mac_array[13] ^ mac_array[11] ^ mac_array[7] ^ - mac_array[6] ^ mac_array[5]; - - for (i = 0; i < 8; i++) - crc_result = crc_result | (crc[i] << i); - - eth_port_omc_addr (eth_port_num, crc_result, queue, option); - } - return; -} - -/******************************************************************************* -* eth_port_smc_addr - Special Multicast address settings. -* -* DESCRIPTION: -* This routine controls the MV device special MAC multicast support. -* The Special Multicast Table for MAC addresses supports MAC of the form -* 0x01-00-5E-00-00-XX (where XX is between 0x00 and 0x_fF). -* The MAC DA[7:0] bits are used as a pointer to the Special Multicast -* Table entries in the DA-Filter table. -* This function set the Special Multicast Table appropriate entry -* according to the argument given. -* -* INPUT: -* ETH_PORT eth_port_num Port number. -* unsigned char mc_byte Multicast addr last byte (MAC DA[7:0] bits). -* ETH_QUEUE queue Rx queue number for this MAC address. -* int option 0 = Add, 1 = remove address. -* -* OUTPUT: -* See description. -* -* RETURN: -* true is output succeeded. -* false if option parameter is invalid. -* -*******************************************************************************/ -static bool eth_port_smc_addr (ETH_PORT eth_port_num, - unsigned char mc_byte, - ETH_QUEUE queue, int option) -{ - unsigned int smc_table_reg; - unsigned int tbl_offset; - unsigned int reg_offset; - - /* Locate the SMC table entry */ - tbl_offset = (mc_byte / 4) * 4; /* Register offset from SMC table base */ - reg_offset = mc_byte % 4; /* Entry offset within the above register */ - queue &= 0x7; - - switch (option) { - case REJECT_MAC_ADDR: - /* Clear accepts frame bit at specified Special DA table entry */ - smc_table_reg = - MV_REG_READ ((MV64460_ETH_DA_FILTER_SPECIAL_MULTICAST_TABLE_BASE (eth_port_num) + tbl_offset)); - smc_table_reg &= (0x0E << (8 * reg_offset)); - - MV_REG_WRITE ((MV64460_ETH_DA_FILTER_SPECIAL_MULTICAST_TABLE_BASE (eth_port_num) + tbl_offset), smc_table_reg); - break; - - case ACCEPT_MAC_ADDR: - /* Set accepts frame bit at specified Special DA table entry */ - smc_table_reg = - MV_REG_READ ((MV64460_ETH_DA_FILTER_SPECIAL_MULTICAST_TABLE_BASE (eth_port_num) + tbl_offset)); - smc_table_reg |= ((0x01 | queue) << (8 * reg_offset)); - - MV_REG_WRITE ((MV64460_ETH_DA_FILTER_SPECIAL_MULTICAST_TABLE_BASE (eth_port_num) + tbl_offset), smc_table_reg); - break; - - default: - return false; - } - return true; -} - -/******************************************************************************* -* eth_port_omc_addr - Multicast address settings. -* -* DESCRIPTION: -* This routine controls the MV device Other MAC multicast support. -* The Other Multicast Table is used for multicast of another type. -* A CRC-8bit is used as an index to the Other Multicast Table entries -* in the DA-Filter table. -* The function gets the CRC-8bit value from the calling routine and -* set the Other Multicast Table appropriate entry according to the -* CRC-8 argument given. -* -* INPUT: -* ETH_PORT eth_port_num Port number. -* unsigned char crc8 A CRC-8bit (Polynomial: x^8+x^2+x^1+1). -* ETH_QUEUE queue Rx queue number for this MAC address. -* int option 0 = Add, 1 = remove address. -* -* OUTPUT: -* See description. -* -* RETURN: -* true is output succeeded. -* false if option parameter is invalid. -* -*******************************************************************************/ -static bool eth_port_omc_addr (ETH_PORT eth_port_num, - unsigned char crc8, - ETH_QUEUE queue, int option) -{ - unsigned int omc_table_reg; - unsigned int tbl_offset; - unsigned int reg_offset; - - /* Locate the OMC table entry */ - tbl_offset = (crc8 / 4) * 4; /* Register offset from OMC table base */ - reg_offset = crc8 % 4; /* Entry offset within the above register */ - queue &= 0x7; - - switch (option) { - case REJECT_MAC_ADDR: - /* Clear accepts frame bit at specified Other DA table entry */ - omc_table_reg = - MV_REG_READ ((MV64460_ETH_DA_FILTER_OTHER_MULTICAST_TABLE_BASE (eth_port_num) + tbl_offset)); - omc_table_reg &= (0x0E << (8 * reg_offset)); - - MV_REG_WRITE ((MV64460_ETH_DA_FILTER_OTHER_MULTICAST_TABLE_BASE (eth_port_num) + tbl_offset), omc_table_reg); - break; - - case ACCEPT_MAC_ADDR: - /* Set accepts frame bit at specified Other DA table entry */ - omc_table_reg = - MV_REG_READ ((MV64460_ETH_DA_FILTER_OTHER_MULTICAST_TABLE_BASE (eth_port_num) + tbl_offset)); - omc_table_reg |= ((0x01 | queue) << (8 * reg_offset)); - - MV_REG_WRITE ((MV64460_ETH_DA_FILTER_OTHER_MULTICAST_TABLE_BASE (eth_port_num) + tbl_offset), omc_table_reg); - break; - - default: - return false; - } - return true; -} -#endif - -/******************************************************************************* -* eth_port_init_mac_tables - Clear all entrance in the UC, SMC and OMC tables -* -* DESCRIPTION: -* Go through all the DA filter tables (Unicast, Special Multicast & Other -* Multicast) and set each entry to 0. -* -* INPUT: -* ETH_PORT eth_port_num Ethernet Port number. See ETH_PORT enum. -* -* OUTPUT: -* Multicast and Unicast packets are rejected. -* -* RETURN: -* None. -* -*******************************************************************************/ -static void eth_port_init_mac_tables (ETH_PORT eth_port_num) -{ - int table_index; - - /* Clear DA filter unicast table (Ex_dFUT) */ - for (table_index = 0; table_index <= 0xC; table_index += 4) - MV_REG_WRITE ((MV64460_ETH_DA_FILTER_UNICAST_TABLE_BASE - (eth_port_num) + table_index), 0); - - for (table_index = 0; table_index <= 0xFC; table_index += 4) { - /* Clear DA filter special multicast table (Ex_dFSMT) */ - MV_REG_WRITE ((MV64460_ETH_DA_FILTER_SPECIAL_MULTICAST_TABLE_BASE (eth_port_num) + table_index), 0); - /* Clear DA filter other multicast table (Ex_dFOMT) */ - MV_REG_WRITE ((MV64460_ETH_DA_FILTER_OTHER_MULTICAST_TABLE_BASE (eth_port_num) + table_index), 0); - } -} - -/******************************************************************************* -* eth_clear_mib_counters - Clear all MIB counters -* -* DESCRIPTION: -* This function clears all MIB counters of a specific ethernet port. -* A read from the MIB counter will reset the counter. -* -* INPUT: -* ETH_PORT eth_port_num Ethernet Port number. See ETH_PORT enum. -* -* OUTPUT: -* After reading all MIB counters, the counters resets. -* -* RETURN: -* MIB counter value. -* -*******************************************************************************/ -static void eth_clear_mib_counters (ETH_PORT eth_port_num) -{ - int i; - - /* Perform dummy reads from MIB counters */ - for (i = ETH_MIB_GOOD_OCTETS_RECEIVED_LOW; i < ETH_MIB_LATE_COLLISION; - i += 4) { - (void)MV_REG_READ ((MV64460_ETH_MIB_COUNTERS_BASE - (eth_port_num) + i)); - } - - return; -} - -/******************************************************************************* -* eth_read_mib_counter - Read a MIB counter -* -* DESCRIPTION: -* This function reads a MIB counter of a specific ethernet port. -* NOTE - If read from ETH_MIB_GOOD_OCTETS_RECEIVED_LOW, then the -* following read must be from ETH_MIB_GOOD_OCTETS_RECEIVED_HIGH -* register. The same applies for ETH_MIB_GOOD_OCTETS_SENT_LOW and -* ETH_MIB_GOOD_OCTETS_SENT_HIGH -* -* INPUT: -* ETH_PORT eth_port_num Ethernet Port number. See ETH_PORT enum. -* unsigned int mib_offset MIB counter offset (use ETH_MIB_... macros). -* -* OUTPUT: -* After reading the MIB counter, the counter resets. -* -* RETURN: -* MIB counter value. -* -*******************************************************************************/ -unsigned int eth_read_mib_counter (ETH_PORT eth_port_num, - unsigned int mib_offset) -{ - return (MV_REG_READ (MV64460_ETH_MIB_COUNTERS_BASE (eth_port_num) - + mib_offset)); -} - -/******************************************************************************* -* ethernet_phy_set - Set the ethernet port PHY address. -* -* DESCRIPTION: -* This routine set the ethernet port PHY address according to given -* parameter. -* -* INPUT: -* ETH_PORT eth_port_num Ethernet Port number. See ETH_PORT enum. -* -* OUTPUT: -* Set PHY Address Register with given PHY address parameter. -* -* RETURN: -* None. -* -*******************************************************************************/ -static void ethernet_phy_set (ETH_PORT eth_port_num, int phy_addr) -{ - unsigned int reg_data; - - reg_data = MV_REG_READ (MV64460_ETH_PHY_ADDR_REG); - - reg_data &= ~(0x1F << (5 * eth_port_num)); - reg_data |= (phy_addr << (5 * eth_port_num)); - - MV_REG_WRITE (MV64460_ETH_PHY_ADDR_REG, reg_data); - - return; -} - -/******************************************************************************* - * ethernet_phy_get - Get the ethernet port PHY address. - * - * DESCRIPTION: - * This routine returns the given ethernet port PHY address. - * - * INPUT: - * ETH_PORT eth_port_num Ethernet Port number. See ETH_PORT enum. - * - * OUTPUT: - * None. - * - * RETURN: - * PHY address. - * - *******************************************************************************/ -static int ethernet_phy_get (ETH_PORT eth_port_num) -{ - unsigned int reg_data; - - reg_data = MV_REG_READ (MV64460_ETH_PHY_ADDR_REG); - - return ((reg_data >> (5 * eth_port_num)) & 0x1f); -} - -/***********************************************************/ -/* (Re)start autonegotiation */ -/***********************************************************/ -int phy_setup_aneg (char *devname, unsigned char addr) -{ - unsigned short ctl, adv; - - /* Setup standard advertise */ - miiphy_read (devname, addr, MII_ADVERTISE, &adv); - adv |= (LPA_LPACK | LPA_RFAULT | LPA_100BASE4 | - LPA_100FULL | LPA_100HALF | LPA_10FULL | - LPA_10HALF); - miiphy_write (devname, addr, MII_ADVERTISE, adv); - - miiphy_read (devname, addr, MII_CTRL1000, &adv); - adv |= (0x0300); - miiphy_write (devname, addr, MII_CTRL1000, adv); - - /* Start/Restart aneg */ - miiphy_read (devname, addr, MII_BMCR, &ctl); - ctl |= (BMCR_ANENABLE | BMCR_ANRESTART); - miiphy_write (devname, addr, MII_BMCR, ctl); - - return 0; -} - -/******************************************************************************* - * ethernet_phy_reset - Reset Ethernet port PHY. - * - * DESCRIPTION: - * This routine utilize the SMI interface to reset the ethernet port PHY. - * The routine waits until the link is up again or link up is timeout. - * - * INPUT: - * ETH_PORT eth_port_num Ethernet Port number. See ETH_PORT enum. - * - * OUTPUT: - * The ethernet port PHY renew its link. - * - * RETURN: - * None. - * - *******************************************************************************/ -static bool ethernet_phy_reset (ETH_PORT eth_port_num) -{ - unsigned int time_out = 50; - unsigned int phy_reg_data; - - eth_port_read_smi_reg (eth_port_num, 20, &phy_reg_data); - phy_reg_data |= 0x0083; /* Set bit 7 to 1 for different RGMII timing */ - eth_port_write_smi_reg (eth_port_num, 20, phy_reg_data); - - /* Reset the PHY */ - eth_port_read_smi_reg (eth_port_num, 0, &phy_reg_data); - phy_reg_data |= 0x8000; /* Set bit 15 to reset the PHY */ - eth_port_write_smi_reg (eth_port_num, 0, phy_reg_data); - - /* Poll on the PHY LINK */ - do { - eth_port_read_smi_reg (eth_port_num, 1, &phy_reg_data); - - if (time_out-- == 0) - return false; - } - while (!(phy_reg_data & 0x20)); - - return true; -} - -/******************************************************************************* - * eth_port_reset - Reset Ethernet port - * - * DESCRIPTION: - * This routine resets the chip by aborting any SDMA engine activity and - * clearing the MIB counters. The Receiver and the Transmit unit are in - * idle state after this command is performed and the port is disabled. - * - * INPUT: - * ETH_PORT eth_port_num Ethernet Port number. See ETH_PORT enum. - * - * OUTPUT: - * Channel activity is halted. - * - * RETURN: - * None. - * - *******************************************************************************/ -static void eth_port_reset (ETH_PORT eth_port_num) -{ - unsigned int reg_data; - - /* Stop Tx port activity. Check port Tx activity. */ - reg_data = - MV_REG_READ (MV64460_ETH_TRANSMIT_QUEUE_COMMAND_REG - (eth_port_num)); - - if (reg_data & 0xFF) { - /* Issue stop command for active channels only */ - MV_REG_WRITE (MV64460_ETH_TRANSMIT_QUEUE_COMMAND_REG - (eth_port_num), (reg_data << 8)); - - /* Wait for all Tx activity to terminate. */ - do { - /* Check port cause register that all Tx queues are stopped */ - reg_data = - MV_REG_READ - (MV64460_ETH_TRANSMIT_QUEUE_COMMAND_REG - (eth_port_num)); - } - while (reg_data & 0xFF); - } - - /* Stop Rx port activity. Check port Rx activity. */ - reg_data = - MV_REG_READ (MV64460_ETH_RECEIVE_QUEUE_COMMAND_REG - (eth_port_num)); - - if (reg_data & 0xFF) { - /* Issue stop command for active channels only */ - MV_REG_WRITE (MV64460_ETH_RECEIVE_QUEUE_COMMAND_REG - (eth_port_num), (reg_data << 8)); - - /* Wait for all Rx activity to terminate. */ - do { - /* Check port cause register that all Rx queues are stopped */ - reg_data = - MV_REG_READ - (MV64460_ETH_RECEIVE_QUEUE_COMMAND_REG - (eth_port_num)); - } - while (reg_data & 0xFF); - } - - /* Clear all MIB counters */ - eth_clear_mib_counters (eth_port_num); - - /* Reset the Enable bit in the Configuration Register */ - reg_data = - MV_REG_READ (MV64460_ETH_PORT_SERIAL_CONTROL_REG - (eth_port_num)); - reg_data &= ~ETH_SERIAL_PORT_ENABLE; - MV_REG_WRITE (MV64460_ETH_PORT_SERIAL_CONTROL_REG (eth_port_num), - reg_data); - - return; -} - -#if 0 /* Not needed here */ -/******************************************************************************* - * ethernet_set_config_reg - Set specified bits in configuration register. - * - * DESCRIPTION: - * This function sets specified bits in the given ethernet - * configuration register. - * - * INPUT: - * ETH_PORT eth_port_num Ethernet Port number. See ETH_PORT enum. - * unsigned int value 32 bit value. - * - * OUTPUT: - * The set bits in the value parameter are set in the configuration - * register. - * - * RETURN: - * None. - * - *******************************************************************************/ -static void ethernet_set_config_reg (ETH_PORT eth_port_num, - unsigned int value) -{ - unsigned int eth_config_reg; - - eth_config_reg = - MV_REG_READ (MV64460_ETH_PORT_CONFIG_REG (eth_port_num)); - eth_config_reg |= value; - MV_REG_WRITE (MV64460_ETH_PORT_CONFIG_REG (eth_port_num), - eth_config_reg); - - return; -} -#endif - -#if 0 /* FIXME */ -/******************************************************************************* - * ethernet_reset_config_reg - Reset specified bits in configuration register. - * - * DESCRIPTION: - * This function resets specified bits in the given Ethernet - * configuration register. - * - * INPUT: - * ETH_PORT eth_port_num Ethernet Port number. See ETH_PORT enum. - * unsigned int value 32 bit value. - * - * OUTPUT: - * The set bits in the value parameter are reset in the configuration - * register. - * - * RETURN: - * None. - * - *******************************************************************************/ -static void ethernet_reset_config_reg (ETH_PORT eth_port_num, - unsigned int value) -{ - unsigned int eth_config_reg; - - eth_config_reg = MV_REG_READ (MV64460_ETH_PORT_CONFIG_EXTEND_REG - (eth_port_num)); - eth_config_reg &= ~value; - MV_REG_WRITE (MV64460_ETH_PORT_CONFIG_EXTEND_REG (eth_port_num), - eth_config_reg); - - return; -} -#endif - -#if 0 /* Not needed here */ -/******************************************************************************* - * ethernet_get_config_reg - Get the port configuration register - * - * DESCRIPTION: - * This function returns the configuration register value of the given - * ethernet port. - * - * INPUT: - * ETH_PORT eth_port_num Ethernet Port number. See ETH_PORT enum. - * - * OUTPUT: - * None. - * - * RETURN: - * Port configuration register value. - * - *******************************************************************************/ -static unsigned int ethernet_get_config_reg (ETH_PORT eth_port_num) -{ - unsigned int eth_config_reg; - - eth_config_reg = MV_REG_READ (MV64460_ETH_PORT_CONFIG_EXTEND_REG - (eth_port_num)); - return eth_config_reg; -} - -#endif - -/******************************************************************************* - * eth_port_read_smi_reg - Read PHY registers - * - * DESCRIPTION: - * This routine utilize the SMI interface to interact with the PHY in - * order to perform PHY register read. - * - * INPUT: - * ETH_PORT eth_port_num Ethernet Port number. See ETH_PORT enum. - * unsigned int phy_reg PHY register address offset. - * unsigned int *value Register value buffer. - * - * OUTPUT: - * Write the value of a specified PHY register into given buffer. - * - * RETURN: - * false if the PHY is busy or read data is not in valid state. - * true otherwise. - * - *******************************************************************************/ -static bool eth_port_read_smi_reg (ETH_PORT eth_port_num, - unsigned int phy_reg, unsigned int *value) -{ - unsigned int reg_value; - unsigned int time_out = PHY_BUSY_TIMEOUT; - int phy_addr; - - phy_addr = ethernet_phy_get (eth_port_num); - - /* first check that it is not busy */ - do { - reg_value = MV_REG_READ (MV64460_ETH_SMI_REG); - if (time_out-- == 0) { - return false; - } - } - while (reg_value & ETH_SMI_BUSY); - - /* not busy */ - - MV_REG_WRITE (MV64460_ETH_SMI_REG, - (phy_addr << 16) | (phy_reg << 21) | - ETH_SMI_OPCODE_READ); - - time_out = PHY_BUSY_TIMEOUT; /* initialize the time out var again */ - - do { - reg_value = MV_REG_READ (MV64460_ETH_SMI_REG); - if (time_out-- == 0) { - return false; - } - } - while ((reg_value & ETH_SMI_READ_VALID) != ETH_SMI_READ_VALID); /* Bit set equ operation done */ - - /* Wait for the data to update in the SMI register */ -#define PHY_UPDATE_TIMEOUT 10000 - for (time_out = 0; time_out < PHY_UPDATE_TIMEOUT; time_out++); - - reg_value = MV_REG_READ (MV64460_ETH_SMI_REG); - - *value = reg_value & 0xffff; - - return true; -} - -int mv_miiphy_read(const char *devname, unsigned char phy_addr, - unsigned char phy_reg, unsigned short *value) -{ - unsigned int reg_value; - unsigned int time_out = PHY_BUSY_TIMEOUT; - - /* first check that it is not busy */ - do { - reg_value = MV_REG_READ (MV64460_ETH_SMI_REG); - if (time_out-- == 0) { - return false; - } - } - while (reg_value & ETH_SMI_BUSY); - - /* not busy */ - MV_REG_WRITE (MV64460_ETH_SMI_REG, - (phy_addr << 16) | (phy_reg << 21) | - ETH_SMI_OPCODE_READ); - - time_out = PHY_BUSY_TIMEOUT; /* initialize the time out var again */ - - do { - reg_value = MV_REG_READ (MV64460_ETH_SMI_REG); - if (time_out-- == 0) { - return false; - } - } - while ((reg_value & ETH_SMI_READ_VALID) != ETH_SMI_READ_VALID); /* Bit set equ operation done */ - - /* Wait for the data to update in the SMI register */ - for (time_out = 0; time_out < PHY_UPDATE_TIMEOUT; time_out++); - - reg_value = MV_REG_READ (MV64460_ETH_SMI_REG); - - *value = reg_value & 0xffff; - - return 0; -} - -/******************************************************************************* - * eth_port_write_smi_reg - Write to PHY registers - * - * DESCRIPTION: - * This routine utilize the SMI interface to interact with the PHY in - * order to perform writes to PHY registers. - * - * INPUT: - * ETH_PORT eth_port_num Ethernet Port number. See ETH_PORT enum. - * unsigned int phy_reg PHY register address offset. - * unsigned int value Register value. - * - * OUTPUT: - * Write the given value to the specified PHY register. - * - * RETURN: - * false if the PHY is busy. - * true otherwise. - * - *******************************************************************************/ -static bool eth_port_write_smi_reg (ETH_PORT eth_port_num, - unsigned int phy_reg, unsigned int value) -{ - unsigned int reg_value; - unsigned int time_out = PHY_BUSY_TIMEOUT; - int phy_addr; - - phy_addr = ethernet_phy_get (eth_port_num); - - /* first check that it is not busy */ - do { - reg_value = MV_REG_READ (MV64460_ETH_SMI_REG); - if (time_out-- == 0) { - return false; - } - } - while (reg_value & ETH_SMI_BUSY); - - /* not busy */ - MV_REG_WRITE (MV64460_ETH_SMI_REG, - (phy_addr << 16) | (phy_reg << 21) | - ETH_SMI_OPCODE_WRITE | (value & 0xffff)); - return true; -} - -int mv_miiphy_write(const char *devname, unsigned char phy_addr, - unsigned char phy_reg, unsigned short value) -{ - unsigned int reg_value; - unsigned int time_out = PHY_BUSY_TIMEOUT; - - /* first check that it is not busy */ - do { - reg_value = MV_REG_READ (MV64460_ETH_SMI_REG); - if (time_out-- == 0) { - return false; - } - } - while (reg_value & ETH_SMI_BUSY); - - /* not busy */ - MV_REG_WRITE (MV64460_ETH_SMI_REG, - (phy_addr << 16) | (phy_reg << 21) | - ETH_SMI_OPCODE_WRITE | (value & 0xffff)); - return 0; -} - -/******************************************************************************* - * eth_set_access_control - Config address decode parameters for Ethernet unit - * - * DESCRIPTION: - * This function configures the address decode parameters for the Gigabit - * Ethernet Controller according the given parameters struct. - * - * INPUT: - * ETH_PORT eth_port_num Ethernet Port number. See ETH_PORT enum. - * ETH_WIN_PARAM *param Address decode parameter struct. - * - * OUTPUT: - * An access window is opened using the given access parameters. - * - * RETURN: - * None. - * - *******************************************************************************/ -static void eth_set_access_control (ETH_PORT eth_port_num, - ETH_WIN_PARAM * param) -{ - unsigned int access_prot_reg; - - /* Set access control register */ - access_prot_reg = MV_REG_READ (MV64460_ETH_ACCESS_PROTECTION_REG - (eth_port_num)); - access_prot_reg &= (~(3 << (param->win * 2))); /* clear window permission */ - access_prot_reg |= (param->access_ctrl << (param->win * 2)); - MV_REG_WRITE (MV64460_ETH_ACCESS_PROTECTION_REG (eth_port_num), - access_prot_reg); - - /* Set window Size reg (SR) */ - MV_REG_WRITE ((MV64460_ETH_SIZE_REG_0 + - (ETH_SIZE_REG_GAP * param->win)), - (((param->size / 0x10000) - 1) << 16)); - - /* Set window Base address reg (BA) */ - MV_REG_WRITE ((MV64460_ETH_BAR_0 + (ETH_BAR_GAP * param->win)), - (param->target | param->attributes | param->base_addr)); - /* High address remap reg (HARR) */ - if (param->win < 4) - MV_REG_WRITE ((MV64460_ETH_HIGH_ADDR_REMAP_REG_0 + - (ETH_HIGH_ADDR_REMAP_REG_GAP * param->win)), - param->high_addr); - - /* Base address enable reg (BARER) */ - if (param->enable == 1) - MV_RESET_REG_BITS (MV64460_ETH_BASE_ADDR_ENABLE_REG, - (1 << param->win)); - else - MV_SET_REG_BITS (MV64460_ETH_BASE_ADDR_ENABLE_REG, - (1 << param->win)); -} - -/******************************************************************************* - * ether_init_rx_desc_ring - Curve a Rx chain desc list and buffer in memory. - * - * DESCRIPTION: - * This function prepares a Rx chained list of descriptors and packet - * buffers in a form of a ring. The routine must be called after port - * initialization routine and before port start routine. - * The Ethernet SDMA engine uses CPU bus addresses to access the various - * devices in the system (i.e. DRAM). This function uses the ethernet - * struct 'virtual to physical' routine (set by the user) to set the ring - * with physical addresses. - * - * INPUT: - * ETH_PORT_INFO *p_eth_port_ctrl Ethernet Port Control srtuct. - * ETH_QUEUE rx_queue Number of Rx queue. - * int rx_desc_num Number of Rx descriptors - * int rx_buff_size Size of Rx buffer - * unsigned int rx_desc_base_addr Rx descriptors memory area base addr. - * unsigned int rx_buff_base_addr Rx buffer memory area base addr. - * - * OUTPUT: - * The routine updates the Ethernet port control struct with information - * regarding the Rx descriptors and buffers. - * - * RETURN: - * false if the given descriptors memory area is not aligned according to - * Ethernet SDMA specifications. - * true otherwise. - * - *******************************************************************************/ -static bool ether_init_rx_desc_ring (ETH_PORT_INFO * p_eth_port_ctrl, - ETH_QUEUE rx_queue, - int rx_desc_num, - int rx_buff_size, - unsigned int rx_desc_base_addr, - unsigned int rx_buff_base_addr) -{ - ETH_RX_DESC *p_rx_desc; - ETH_RX_DESC *p_rx_prev_desc; /* pointer to link with the last descriptor */ - unsigned int buffer_addr; - int ix; /* a counter */ - - p_rx_desc = (ETH_RX_DESC *) rx_desc_base_addr; - p_rx_prev_desc = p_rx_desc; - buffer_addr = rx_buff_base_addr; - - /* Rx desc Must be 4LW aligned (i.e. Descriptor_Address[3:0]=0000). */ - if (rx_buff_base_addr & 0xF) - return false; - - /* Rx buffers are limited to 64K bytes and Minimum size is 8 bytes */ - if ((rx_buff_size < 8) || (rx_buff_size > RX_BUFFER_MAX_SIZE)) - return false; - - /* Rx buffers must be 64-bit aligned. */ - if ((rx_buff_base_addr + rx_buff_size) & 0x7) - return false; - - /* initialize the Rx descriptors ring */ - for (ix = 0; ix < rx_desc_num; ix++) { - p_rx_desc->buf_size = rx_buff_size; - p_rx_desc->byte_cnt = 0x0000; - p_rx_desc->cmd_sts = - ETH_BUFFER_OWNED_BY_DMA | ETH_RX_ENABLE_INTERRUPT; - p_rx_desc->next_desc_ptr = - ((unsigned int) p_rx_desc) + RX_DESC_ALIGNED_SIZE; - p_rx_desc->buf_ptr = buffer_addr; - p_rx_desc->return_info = 0x00000000; - D_CACHE_FLUSH_LINE (p_rx_desc, 0); - buffer_addr += rx_buff_size; - p_rx_prev_desc = p_rx_desc; - p_rx_desc = (ETH_RX_DESC *) - ((unsigned int) p_rx_desc + RX_DESC_ALIGNED_SIZE); - } - - /* Closing Rx descriptors ring */ - p_rx_prev_desc->next_desc_ptr = (rx_desc_base_addr); - D_CACHE_FLUSH_LINE (p_rx_prev_desc, 0); - - /* Save Rx desc pointer to driver struct. */ - CURR_RFD_SET ((ETH_RX_DESC *) rx_desc_base_addr, rx_queue); - USED_RFD_SET ((ETH_RX_DESC *) rx_desc_base_addr, rx_queue); - - p_eth_port_ctrl->p_rx_desc_area_base[rx_queue] = - (ETH_RX_DESC *) rx_desc_base_addr; - p_eth_port_ctrl->rx_desc_area_size[rx_queue] = - rx_desc_num * RX_DESC_ALIGNED_SIZE; - - p_eth_port_ctrl->port_rx_queue_command |= (1 << rx_queue); - - return true; -} - -/******************************************************************************* - * ether_init_tx_desc_ring - Curve a Tx chain desc list and buffer in memory. - * - * DESCRIPTION: - * This function prepares a Tx chained list of descriptors and packet - * buffers in a form of a ring. The routine must be called after port - * initialization routine and before port start routine. - * The Ethernet SDMA engine uses CPU bus addresses to access the various - * devices in the system (i.e. DRAM). This function uses the ethernet - * struct 'virtual to physical' routine (set by the user) to set the ring - * with physical addresses. - * - * INPUT: - * ETH_PORT_INFO *p_eth_port_ctrl Ethernet Port Control srtuct. - * ETH_QUEUE tx_queue Number of Tx queue. - * int tx_desc_num Number of Tx descriptors - * int tx_buff_size Size of Tx buffer - * unsigned int tx_desc_base_addr Tx descriptors memory area base addr. - * unsigned int tx_buff_base_addr Tx buffer memory area base addr. - * - * OUTPUT: - * The routine updates the Ethernet port control struct with information - * regarding the Tx descriptors and buffers. - * - * RETURN: - * false if the given descriptors memory area is not aligned according to - * Ethernet SDMA specifications. - * true otherwise. - * - *******************************************************************************/ -static bool ether_init_tx_desc_ring (ETH_PORT_INFO * p_eth_port_ctrl, - ETH_QUEUE tx_queue, - int tx_desc_num, - int tx_buff_size, - unsigned int tx_desc_base_addr, - unsigned int tx_buff_base_addr) -{ - - ETH_TX_DESC *p_tx_desc; - ETH_TX_DESC *p_tx_prev_desc; - unsigned int buffer_addr; - int ix; /* a counter */ - - /* save the first desc pointer to link with the last descriptor */ - p_tx_desc = (ETH_TX_DESC *) tx_desc_base_addr; - p_tx_prev_desc = p_tx_desc; - buffer_addr = tx_buff_base_addr; - - /* Tx desc Must be 4LW aligned (i.e. Descriptor_Address[3:0]=0000). */ - if (tx_buff_base_addr & 0xF) - return false; - - /* Tx buffers are limited to 64K bytes and Minimum size is 8 bytes */ - if ((tx_buff_size > TX_BUFFER_MAX_SIZE) - || (tx_buff_size < TX_BUFFER_MIN_SIZE)) - return false; - - /* Initialize the Tx descriptors ring */ - for (ix = 0; ix < tx_desc_num; ix++) { - p_tx_desc->byte_cnt = 0x0000; - p_tx_desc->l4i_chk = 0x0000; - p_tx_desc->cmd_sts = 0x00000000; - p_tx_desc->next_desc_ptr = - ((unsigned int) p_tx_desc) + TX_DESC_ALIGNED_SIZE; - - p_tx_desc->buf_ptr = buffer_addr; - p_tx_desc->return_info = 0x00000000; - D_CACHE_FLUSH_LINE (p_tx_desc, 0); - buffer_addr += tx_buff_size; - p_tx_prev_desc = p_tx_desc; - p_tx_desc = (ETH_TX_DESC *) - ((unsigned int) p_tx_desc + TX_DESC_ALIGNED_SIZE); - - } - /* Closing Tx descriptors ring */ - p_tx_prev_desc->next_desc_ptr = tx_desc_base_addr; - D_CACHE_FLUSH_LINE (p_tx_prev_desc, 0); - /* Set Tx desc pointer in driver struct. */ - CURR_TFD_SET ((ETH_TX_DESC *) tx_desc_base_addr, tx_queue); - USED_TFD_SET ((ETH_TX_DESC *) tx_desc_base_addr, tx_queue); - - /* Init Tx ring base and size parameters */ - p_eth_port_ctrl->p_tx_desc_area_base[tx_queue] = - (ETH_TX_DESC *) tx_desc_base_addr; - p_eth_port_ctrl->tx_desc_area_size[tx_queue] = - (tx_desc_num * TX_DESC_ALIGNED_SIZE); - - /* Add the queue to the list of Tx queues of this port */ - p_eth_port_ctrl->port_tx_queue_command |= (1 << tx_queue); - - return true; -} - -/******************************************************************************* - * eth_port_send - Send an Ethernet packet - * - * DESCRIPTION: - * This routine send a given packet described by p_pktinfo parameter. It - * supports transmitting of a packet spaned over multiple buffers. The - * routine updates 'curr' and 'first' indexes according to the packet - * segment passed to the routine. In case the packet segment is first, - * the 'first' index is update. In any case, the 'curr' index is updated. - * If the routine get into Tx resource error it assigns 'curr' index as - * 'first'. This way the function can abort Tx process of multiple - * descriptors per packet. - * - * INPUT: - * ETH_PORT_INFO *p_eth_port_ctrl Ethernet Port Control srtuct. - * ETH_QUEUE tx_queue Number of Tx queue. - * PKT_INFO *p_pkt_info User packet buffer. - * - * OUTPUT: - * Tx ring 'curr' and 'first' indexes are updated. - * - * RETURN: - * ETH_QUEUE_FULL in case of Tx resource error. - * ETH_ERROR in case the routine can not access Tx desc ring. - * ETH_QUEUE_LAST_RESOURCE if the routine uses the last Tx resource. - * ETH_OK otherwise. - * - *******************************************************************************/ -static ETH_FUNC_RET_STATUS eth_port_send (ETH_PORT_INFO * p_eth_port_ctrl, - ETH_QUEUE tx_queue, - PKT_INFO * p_pkt_info) -{ - volatile ETH_TX_DESC *p_tx_desc_first; - volatile ETH_TX_DESC *p_tx_desc_curr; - volatile ETH_TX_DESC *p_tx_next_desc_curr; - volatile ETH_TX_DESC *p_tx_desc_used; - unsigned int command_status; - - /* Do not process Tx ring in case of Tx ring resource error */ - if (p_eth_port_ctrl->tx_resource_err[tx_queue] == true) - return ETH_QUEUE_FULL; - - /* Get the Tx Desc ring indexes */ - CURR_TFD_GET (p_tx_desc_curr, tx_queue); - USED_TFD_GET (p_tx_desc_used, tx_queue); - - if (p_tx_desc_curr == NULL) - return ETH_ERROR; - - /* The following parameters are used to save readings from memory */ - p_tx_next_desc_curr = TX_NEXT_DESC_PTR (p_tx_desc_curr, tx_queue); - command_status = p_pkt_info->cmd_sts | ETH_ZERO_PADDING | ETH_GEN_CRC; - - if (command_status & (ETH_TX_FIRST_DESC)) { - /* Update first desc */ - FIRST_TFD_SET (p_tx_desc_curr, tx_queue); - p_tx_desc_first = p_tx_desc_curr; - } else { - FIRST_TFD_GET (p_tx_desc_first, tx_queue); - command_status |= ETH_BUFFER_OWNED_BY_DMA; - } - - /* Buffers with a payload smaller than 8 bytes must be aligned to 64-bit */ - /* boundary. We use the memory allocated for Tx descriptor. This memory */ - /* located in TX_BUF_OFFSET_IN_DESC offset within the Tx descriptor. */ - if (p_pkt_info->byte_cnt <= 8) { - printf ("You have failed in the < 8 bytes errata - fixme\n"); /* RABEEH - TBD */ - return ETH_ERROR; - - p_tx_desc_curr->buf_ptr = - (unsigned int) p_tx_desc_curr + TX_BUF_OFFSET_IN_DESC; - eth_b_copy (p_pkt_info->buf_ptr, p_tx_desc_curr->buf_ptr, - p_pkt_info->byte_cnt); - } else - p_tx_desc_curr->buf_ptr = p_pkt_info->buf_ptr; - - p_tx_desc_curr->byte_cnt = p_pkt_info->byte_cnt; - p_tx_desc_curr->return_info = p_pkt_info->return_info; - - if (p_pkt_info->cmd_sts & (ETH_TX_LAST_DESC)) { - /* Set last desc with DMA ownership and interrupt enable. */ - p_tx_desc_curr->cmd_sts = command_status | - ETH_BUFFER_OWNED_BY_DMA | ETH_TX_ENABLE_INTERRUPT; - - if (p_tx_desc_curr != p_tx_desc_first) - p_tx_desc_first->cmd_sts |= ETH_BUFFER_OWNED_BY_DMA; - - /* Flush CPU pipe */ - - D_CACHE_FLUSH_LINE ((unsigned int) p_tx_desc_curr, 0); - D_CACHE_FLUSH_LINE ((unsigned int) p_tx_desc_first, 0); - CPU_PIPE_FLUSH; - - /* Apply send command */ - ETH_ENABLE_TX_QUEUE (tx_queue, p_eth_port_ctrl->port_num); - - /* Finish Tx packet. Update first desc in case of Tx resource error */ - p_tx_desc_first = p_tx_next_desc_curr; - FIRST_TFD_SET (p_tx_desc_first, tx_queue); - - } else { - p_tx_desc_curr->cmd_sts = command_status; - D_CACHE_FLUSH_LINE ((unsigned int) p_tx_desc_curr, 0); - } - - /* Check for ring index overlap in the Tx desc ring */ - if (p_tx_next_desc_curr == p_tx_desc_used) { - /* Update the current descriptor */ - CURR_TFD_SET (p_tx_desc_first, tx_queue); - - p_eth_port_ctrl->tx_resource_err[tx_queue] = true; - return ETH_QUEUE_LAST_RESOURCE; - } else { - /* Update the current descriptor */ - CURR_TFD_SET (p_tx_next_desc_curr, tx_queue); - return ETH_OK; - } -} - -/******************************************************************************* - * eth_tx_return_desc - Free all used Tx descriptors - * - * DESCRIPTION: - * This routine returns the transmitted packet information to the caller. - * It uses the 'first' index to support Tx desc return in case a transmit - * of a packet spanned over multiple buffer still in process. - * In case the Tx queue was in "resource error" condition, where there are - * no available Tx resources, the function resets the resource error flag. - * - * INPUT: - * ETH_PORT_INFO *p_eth_port_ctrl Ethernet Port Control srtuct. - * ETH_QUEUE tx_queue Number of Tx queue. - * PKT_INFO *p_pkt_info User packet buffer. - * - * OUTPUT: - * Tx ring 'first' and 'used' indexes are updated. - * - * RETURN: - * ETH_ERROR in case the routine can not access Tx desc ring. - * ETH_RETRY in case there is transmission in process. - * ETH_END_OF_JOB if the routine has nothing to release. - * ETH_OK otherwise. - * - *******************************************************************************/ -static ETH_FUNC_RET_STATUS eth_tx_return_desc (ETH_PORT_INFO * - p_eth_port_ctrl, - ETH_QUEUE tx_queue, - PKT_INFO * p_pkt_info) -{ - volatile ETH_TX_DESC *p_tx_desc_used = NULL; - volatile ETH_TX_DESC *p_tx_desc_first = NULL; - unsigned int command_status; - - /* Get the Tx Desc ring indexes */ - USED_TFD_GET (p_tx_desc_used, tx_queue); - FIRST_TFD_GET (p_tx_desc_first, tx_queue); - - /* Sanity check */ - if (p_tx_desc_used == NULL) - return ETH_ERROR; - - command_status = p_tx_desc_used->cmd_sts; - - /* Still transmitting... */ - if (command_status & (ETH_BUFFER_OWNED_BY_DMA)) { - D_CACHE_FLUSH_LINE ((unsigned int) p_tx_desc_used, 0); - return ETH_RETRY; - } - - /* Stop release. About to overlap the current available Tx descriptor */ - if ((p_tx_desc_used == p_tx_desc_first) && - (p_eth_port_ctrl->tx_resource_err[tx_queue] == false)) { - D_CACHE_FLUSH_LINE ((unsigned int) p_tx_desc_used, 0); - return ETH_END_OF_JOB; - } - - /* Pass the packet information to the caller */ - p_pkt_info->cmd_sts = command_status; - p_pkt_info->return_info = p_tx_desc_used->return_info; - p_tx_desc_used->return_info = 0; - - /* Update the next descriptor to release. */ - USED_TFD_SET (TX_NEXT_DESC_PTR (p_tx_desc_used, tx_queue), tx_queue); - - /* Any Tx return cancels the Tx resource error status */ - if (p_eth_port_ctrl->tx_resource_err[tx_queue] == true) - p_eth_port_ctrl->tx_resource_err[tx_queue] = false; - - D_CACHE_FLUSH_LINE ((unsigned int) p_tx_desc_used, 0); - - return ETH_OK; - -} - -/******************************************************************************* - * eth_port_receive - Get received information from Rx ring. - * - * DESCRIPTION: - * This routine returns the received data to the caller. There is no - * data copying during routine operation. All information is returned - * using pointer to packet information struct passed from the caller. - * If the routine exhausts Rx ring resources then the resource error flag - * is set. - * - * INPUT: - * ETH_PORT_INFO *p_eth_port_ctrl Ethernet Port Control srtuct. - * ETH_QUEUE rx_queue Number of Rx queue. - * PKT_INFO *p_pkt_info User packet buffer. - * - * OUTPUT: - * Rx ring current and used indexes are updated. - * - * RETURN: - * ETH_ERROR in case the routine can not access Rx desc ring. - * ETH_QUEUE_FULL if Rx ring resources are exhausted. - * ETH_END_OF_JOB if there is no received data. - * ETH_OK otherwise. - * - *******************************************************************************/ -static ETH_FUNC_RET_STATUS eth_port_receive (ETH_PORT_INFO * p_eth_port_ctrl, - ETH_QUEUE rx_queue, - PKT_INFO * p_pkt_info) -{ - volatile ETH_RX_DESC *p_rx_curr_desc; - volatile ETH_RX_DESC *p_rx_next_curr_desc; - volatile ETH_RX_DESC *p_rx_used_desc; - unsigned int command_status; - - /* Do not process Rx ring in case of Rx ring resource error */ - if (p_eth_port_ctrl->rx_resource_err[rx_queue] == true) { - printf ("\nRx Queue is full ...\n"); - return ETH_QUEUE_FULL; - } - - /* Get the Rx Desc ring 'curr and 'used' indexes */ - CURR_RFD_GET (p_rx_curr_desc, rx_queue); - USED_RFD_GET (p_rx_used_desc, rx_queue); - - /* Sanity check */ - if (p_rx_curr_desc == NULL) - return ETH_ERROR; - - /* The following parameters are used to save readings from memory */ - p_rx_next_curr_desc = RX_NEXT_DESC_PTR (p_rx_curr_desc, rx_queue); - command_status = p_rx_curr_desc->cmd_sts; - - /* Nothing to receive... */ - if (command_status & (ETH_BUFFER_OWNED_BY_DMA)) { -/* DP(printf("Rx: command_status: %08x\n", command_status)); */ - D_CACHE_FLUSH_LINE ((unsigned int) p_rx_curr_desc, 0); -/* DP(printf("\nETH_END_OF_JOB ...\n"));*/ - return ETH_END_OF_JOB; - } - - p_pkt_info->byte_cnt = (p_rx_curr_desc->byte_cnt) - RX_BUF_OFFSET; - p_pkt_info->cmd_sts = command_status; - p_pkt_info->buf_ptr = (p_rx_curr_desc->buf_ptr) + RX_BUF_OFFSET; - p_pkt_info->return_info = p_rx_curr_desc->return_info; - p_pkt_info->l4i_chk = p_rx_curr_desc->buf_size; /* IP fragment indicator */ - - /* Clean the return info field to indicate that the packet has been */ - /* moved to the upper layers */ - p_rx_curr_desc->return_info = 0; - - /* Update 'curr' in data structure */ - CURR_RFD_SET (p_rx_next_curr_desc, rx_queue); - - /* Rx descriptors resource exhausted. Set the Rx ring resource error flag */ - if (p_rx_next_curr_desc == p_rx_used_desc) - p_eth_port_ctrl->rx_resource_err[rx_queue] = true; - - D_CACHE_FLUSH_LINE ((unsigned int) p_rx_curr_desc, 0); - CPU_PIPE_FLUSH; - - return ETH_OK; -} - -/******************************************************************************* - * eth_rx_return_buff - Returns a Rx buffer back to the Rx ring. - * - * DESCRIPTION: - * This routine returns a Rx buffer back to the Rx ring. It retrieves the - * next 'used' descriptor and attached the returned buffer to it. - * In case the Rx ring was in "resource error" condition, where there are - * no available Rx resources, the function resets the resource error flag. - * - * INPUT: - * ETH_PORT_INFO *p_eth_port_ctrl Ethernet Port Control srtuct. - * ETH_QUEUE rx_queue Number of Rx queue. - * PKT_INFO *p_pkt_info Information on the returned buffer. - * - * OUTPUT: - * New available Rx resource in Rx descriptor ring. - * - * RETURN: - * ETH_ERROR in case the routine can not access Rx desc ring. - * ETH_OK otherwise. - * - *******************************************************************************/ -static ETH_FUNC_RET_STATUS eth_rx_return_buff (ETH_PORT_INFO * - p_eth_port_ctrl, - ETH_QUEUE rx_queue, - PKT_INFO * p_pkt_info) -{ - volatile ETH_RX_DESC *p_used_rx_desc; /* Where to return Rx resource */ - - /* Get 'used' Rx descriptor */ - USED_RFD_GET (p_used_rx_desc, rx_queue); - - /* Sanity check */ - if (p_used_rx_desc == NULL) - return ETH_ERROR; - - p_used_rx_desc->buf_ptr = p_pkt_info->buf_ptr; - p_used_rx_desc->return_info = p_pkt_info->return_info; - p_used_rx_desc->byte_cnt = p_pkt_info->byte_cnt; - p_used_rx_desc->buf_size = MV64460_RX_BUFFER_SIZE; /* Reset Buffer size */ - - /* Flush the write pipe */ - CPU_PIPE_FLUSH; - - /* Return the descriptor to DMA ownership */ - p_used_rx_desc->cmd_sts = - ETH_BUFFER_OWNED_BY_DMA | ETH_RX_ENABLE_INTERRUPT; - - /* Flush descriptor and CPU pipe */ - D_CACHE_FLUSH_LINE ((unsigned int) p_used_rx_desc, 0); - CPU_PIPE_FLUSH; - - /* Move the used descriptor pointer to the next descriptor */ - USED_RFD_SET (RX_NEXT_DESC_PTR (p_used_rx_desc, rx_queue), rx_queue); - - /* Any Rx return cancels the Rx resource error status */ - if (p_eth_port_ctrl->rx_resource_err[rx_queue] == true) - p_eth_port_ctrl->rx_resource_err[rx_queue] = false; - - return ETH_OK; -} - -/******************************************************************************* - * eth_port_set_rx_coal - Sets coalescing interrupt mechanism on RX path - * - * DESCRIPTION: - * This routine sets the RX coalescing interrupt mechanism parameter. - * This parameter is a timeout counter, that counts in 64 t_clk - * chunks ; that when timeout event occurs a maskable interrupt - * occurs. - * The parameter is calculated using the tClk of the MV-643xx chip - * , and the required delay of the interrupt in usec. - * - * INPUT: - * ETH_PORT eth_port_num Ethernet port number - * unsigned int t_clk t_clk of the MV-643xx chip in HZ units - * unsigned int delay Delay in usec - * - * OUTPUT: - * Interrupt coalescing mechanism value is set in MV-643xx chip. - * - * RETURN: - * The interrupt coalescing value set in the gigE port. - * - *******************************************************************************/ -#if 0 /* FIXME */ -static unsigned int eth_port_set_rx_coal (ETH_PORT eth_port_num, - unsigned int t_clk, - unsigned int delay) -{ - unsigned int coal; - - coal = ((t_clk / 1000000) * delay) / 64; - /* Set RX Coalescing mechanism */ - MV_REG_WRITE (MV64460_ETH_SDMA_CONFIG_REG (eth_port_num), - ((coal & 0x3fff) << 8) | - (MV_REG_READ - (MV64460_ETH_SDMA_CONFIG_REG (eth_port_num)) - & 0xffc000ff)); - return coal; -} - -#endif -/******************************************************************************* - * eth_port_set_tx_coal - Sets coalescing interrupt mechanism on TX path - * - * DESCRIPTION: - * This routine sets the TX coalescing interrupt mechanism parameter. - * This parameter is a timeout counter, that counts in 64 t_clk - * chunks ; that when timeout event occurs a maskable interrupt - * occurs. - * The parameter is calculated using the t_cLK frequency of the - * MV-643xx chip and the required delay in the interrupt in uSec - * - * INPUT: - * ETH_PORT eth_port_num Ethernet port number - * unsigned int t_clk t_clk of the MV-643xx chip in HZ units - * unsigned int delay Delay in uSeconds - * - * OUTPUT: - * Interrupt coalescing mechanism value is set in MV-643xx chip. - * - * RETURN: - * The interrupt coalescing value set in the gigE port. - * - *******************************************************************************/ -#if 0 /* FIXME */ -static unsigned int eth_port_set_tx_coal (ETH_PORT eth_port_num, - unsigned int t_clk, - unsigned int delay) -{ - unsigned int coal; - - coal = ((t_clk / 1000000) * delay) / 64; - /* Set TX Coalescing mechanism */ - MV_REG_WRITE (MV64460_ETH_TX_FIFO_URGENT_THRESHOLD_REG (eth_port_num), - coal << 4); - return coal; -} -#endif - -/******************************************************************************* - * eth_b_copy - Copy bytes from source to destination - * - * DESCRIPTION: - * This function supports the eight bytes limitation on Tx buffer size. - * The routine will zero eight bytes starting from the destination address - * followed by copying bytes from the source address to the destination. - * - * INPUT: - * unsigned int src_addr 32 bit source address. - * unsigned int dst_addr 32 bit destination address. - * int byte_count Number of bytes to copy. - * - * OUTPUT: - * See description. - * - * RETURN: - * None. - * - *******************************************************************************/ -static void eth_b_copy (unsigned int src_addr, unsigned int dst_addr, - int byte_count) -{ - /* Zero the dst_addr area */ - *(unsigned int *) dst_addr = 0x0; - - while (byte_count != 0) { - *(char *) dst_addr = *(char *) src_addr; - dst_addr++; - src_addr++; - byte_count--; - } -} diff --git a/board/prodrive/p3mx/mv_eth.h b/board/prodrive/p3mx/mv_eth.h deleted file mode 100644 index 7bbd7f045c..0000000000 --- a/board/prodrive/p3mx/mv_eth.h +++ /dev/null @@ -1,815 +0,0 @@ -/* - * (C) Copyright 2003 - * Ingo Assmus <ingo.assmus@keymile.com> - * - * based on - Driver for MV64460X ethernet ports - * Copyright (C) 2002 rabeeh@galileo.co.il - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -/* - * mv_eth.h - header file for the polled mode GT ethernet driver - */ - -#ifndef __DB64460_ETH_H__ -#define __DB64460_ETH_H__ - -#include <asm/types.h> -#include <asm/io.h> -#include <asm/byteorder.h> -#include <common.h> -#include <net.h> -#include "mv_regs.h" -#include <asm/errno.h> -#include "../../Marvell/include/core.h" - -/************************************************************************* -************************************************************************** -************************************************************************** -* The first part is the high level driver of the gigE ethernet ports. * -************************************************************************** -************************************************************************** -*************************************************************************/ -/* In case not using SG on Tx, define MAX_SKB_FRAGS as 0 */ -#ifndef MAX_SKB_FRAGS -#define MAX_SKB_FRAGS 0 -#endif - -/* Port attributes */ -/*#define MAX_RX_QUEUE_NUM 8*/ -/*#define MAX_TX_QUEUE_NUM 8*/ -#define MAX_RX_QUEUE_NUM 1 -#define MAX_TX_QUEUE_NUM 1 - - -/* Use one TX queue and one RX queue */ -#define MV64460_TX_QUEUE_NUM 1 -#define MV64460_RX_QUEUE_NUM 1 - -/* - * Number of RX / TX descriptors on RX / TX rings. - * Note that allocating RX descriptors is done by allocating the RX - * ring AND a preallocated RX buffers (skb's) for each descriptor. - * The TX descriptors only allocates the TX descriptors ring, - * with no pre allocated TX buffers (skb's are allocated by higher layers. - */ - -/* Default TX ring size is 10 descriptors */ -#ifdef CONFIG_MV64460_ETH_TXQUEUE_SIZE -#define MV64460_TX_QUEUE_SIZE CONFIG_MV64460_ETH_TXQUEUE_SIZE -#else -#define MV64460_TX_QUEUE_SIZE 4 -#endif - -/* Default RX ring size is 4 descriptors */ -#ifdef CONFIG_MV64460_ETH_RXQUEUE_SIZE -#define MV64460_RX_QUEUE_SIZE CONFIG_MV64460_ETH_RXQUEUE_SIZE -#else -#define MV64460_RX_QUEUE_SIZE 4 -#endif - -#ifdef CONFIG_RX_BUFFER_SIZE -#define MV64460_RX_BUFFER_SIZE CONFIG_RX_BUFFER_SIZE -#else -#define MV64460_RX_BUFFER_SIZE 1600 -#endif - -#ifdef CONFIG_TX_BUFFER_SIZE -#define MV64460_TX_BUFFER_SIZE CONFIG_TX_BUFFER_SIZE -#else -#define MV64460_TX_BUFFER_SIZE 1600 -#endif - -/* - * Network device statistics. Akin to the 2.0 ether stats but - * with byte counters. - */ - -struct net_device_stats -{ - unsigned long rx_packets; /* total packets received */ - unsigned long tx_packets; /* total packets transmitted */ - unsigned long rx_bytes; /* total bytes received */ - unsigned long tx_bytes; /* total bytes transmitted */ - unsigned long rx_errors; /* bad packets received */ - unsigned long tx_errors; /* packet transmit problems */ - unsigned long rx_dropped; /* no space in linux buffers */ - unsigned long tx_dropped; /* no space available in linux */ - unsigned long multicast; /* multicast packets received */ - unsigned long collisions; - - /* detailed rx_errors: */ - unsigned long rx_length_errors; - unsigned long rx_over_errors; /* receiver ring buff overflow */ - unsigned long rx_crc_errors; /* recved pkt with crc error */ - unsigned long rx_frame_errors; /* recv'd frame alignment error */ - unsigned long rx_fifo_errors; /* recv'r fifo overrun */ - unsigned long rx_missed_errors; /* receiver missed packet */ - - /* detailed tx_errors */ - unsigned long tx_aborted_errors; - unsigned long tx_carrier_errors; - unsigned long tx_fifo_errors; - unsigned long tx_heartbeat_errors; - unsigned long tx_window_errors; - - /* for cslip etc */ - unsigned long rx_compressed; - unsigned long tx_compressed; -}; - - -/* Private data structure used for ethernet device */ -struct mv64460_eth_priv { - unsigned int port_num; - struct net_device_stats *stats; - - /* to buffer area aligned */ - char * p_eth_tx_buffer[MV64460_TX_QUEUE_SIZE+1]; /*pointers to alligned tx buffs in memory space */ - char * p_eth_rx_buffer[MV64460_RX_QUEUE_SIZE+1]; /*pointers to allinged rx buffs in memory space */ - - /* Size of Tx Ring per queue */ - unsigned int tx_ring_size [MAX_TX_QUEUE_NUM]; - - /* Size of Rx Ring per queue */ - unsigned int rx_ring_size [MAX_RX_QUEUE_NUM]; - - /* Magic Number for Ethernet running */ - unsigned int eth_running; - - int first_init; -}; - -int mv64460_eth_init (struct eth_device *dev); -int mv64460_eth_stop (struct eth_device *dev); -int mv64460_eth_start_xmit(struct eth_device *dev, void *packet, int length); -int mv64460_eth_open (struct eth_device *dev); - - -/************************************************************************* -************************************************************************** -************************************************************************** -* The second part is the low level driver of the gigE ethernet ports. * -************************************************************************** -************************************************************************** -*************************************************************************/ - - -/******************************************************************************** - * Header File for : MV-643xx network interface header - * - * DESCRIPTION: - * This header file contains macros typedefs and function declaration for - * the Marvell Gig Bit Ethernet Controller. - * - * DEPENDENCIES: - * None. - * - *******************************************************************************/ - - -#ifdef CONFIG_SPECIAL_CONSISTENT_MEMORY -#ifdef CONFIG_MV64460_SRAM_CACHEABLE -/* In case SRAM is cacheable but not cache coherent */ -#define D_CACHE_FLUSH_LINE(addr, offset) \ -{ \ - __asm__ __volatile__ ("dcbf %0,%1" : : "r" (addr), "r" (offset)); \ -} -#else -/* In case SRAM is cache coherent or non-cacheable */ -#define D_CACHE_FLUSH_LINE(addr, offset) ; -#endif -#else -#ifdef CONFIG_NOT_COHERENT_CACHE -/* In case of descriptors on DDR but not cache coherent */ -#define D_CACHE_FLUSH_LINE(addr, offset) \ -{ \ - __asm__ __volatile__ ("dcbf %0,%1" : : "r" (addr), "r" (offset)); \ -} -#else -/* In case of descriptors on DDR and cache coherent */ -#define D_CACHE_FLUSH_LINE(addr, offset) ; -#endif /* CONFIG_NOT_COHERENT_CACHE */ -#endif /* CONFIG_SPECIAL_CONSISTENT_MEMORY */ - - -#define CPU_PIPE_FLUSH \ -{ \ - __asm__ __volatile__ ("eieio"); \ -} - - -/* defines */ - -/* Default port configuration value */ -#define PORT_CONFIG_VALUE \ - ETH_UNICAST_NORMAL_MODE | \ - ETH_DEFAULT_RX_QUEUE_0 | \ - ETH_DEFAULT_RX_ARP_QUEUE_0 | \ - ETH_RECEIVE_BC_IF_NOT_IP_OR_ARP | \ - ETH_RECEIVE_BC_IF_IP | \ - ETH_RECEIVE_BC_IF_ARP | \ - ETH_CAPTURE_TCP_FRAMES_DIS | \ - ETH_CAPTURE_UDP_FRAMES_DIS | \ - ETH_DEFAULT_RX_TCP_QUEUE_0 | \ - ETH_DEFAULT_RX_UDP_QUEUE_0 | \ - ETH_DEFAULT_RX_BPDU_QUEUE_0 - -/* Default port extend configuration value */ -#define PORT_CONFIG_EXTEND_VALUE \ - ETH_SPAN_BPDU_PACKETS_AS_NORMAL | \ - ETH_PARTITION_DISABLE - - -/* Default sdma control value */ -#ifdef CONFIG_NOT_COHERENT_CACHE -#define PORT_SDMA_CONFIG_VALUE \ - ETH_RX_BURST_SIZE_16_64BIT | \ - GT_ETH_IPG_INT_RX(0) | \ - ETH_TX_BURST_SIZE_16_64BIT; -#else -#define PORT_SDMA_CONFIG_VALUE \ - ETH_RX_BURST_SIZE_4_64BIT | \ - GT_ETH_IPG_INT_RX(0) | \ - ETH_TX_BURST_SIZE_4_64BIT; -#endif - -#define GT_ETH_IPG_INT_RX(value) \ - ((value & 0x3fff) << 8) - -/* Default port serial control value */ -#define PORT_SERIAL_CONTROL_VALUE \ - ETH_FORCE_LINK_PASS | \ - ETH_ENABLE_AUTO_NEG_FOR_DUPLX | \ - ETH_DISABLE_AUTO_NEG_FOR_FLOW_CTRL | \ - ETH_ADV_SYMMETRIC_FLOW_CTRL | \ - ETH_FORCE_FC_MODE_NO_PAUSE_DIS_TX | \ - ETH_FORCE_BP_MODE_NO_JAM | \ - BIT9 | \ - ETH_DO_NOT_FORCE_LINK_FAIL | \ - ETH_RETRANSMIT_16_ETTEMPTS | \ - ETH_ENABLE_AUTO_NEG_SPEED_GMII | \ - ETH_DTE_ADV_0 | \ - ETH_DISABLE_AUTO_NEG_BYPASS | \ - ETH_AUTO_NEG_NO_CHANGE | \ - ETH_MAX_RX_PACKET_1552BYTE | \ - ETH_CLR_EXT_LOOPBACK | \ - ETH_SET_FULL_DUPLEX_MODE | \ - ETH_ENABLE_FLOW_CTRL_TX_RX_IN_FULL_DUPLEX; - -#define RX_BUFFER_MAX_SIZE 0xFFFF -#define TX_BUFFER_MAX_SIZE 0xFFFF /* Buffer are limited to 64k */ - -#define RX_BUFFER_MIN_SIZE 0x8 -#define TX_BUFFER_MIN_SIZE 0x8 - -/* Tx WRR confoguration macros */ -#define PORT_MAX_TRAN_UNIT 0x24 /* MTU register (default) 9KByte */ -#define PORT_MAX_TOKEN_BUCKET_SIZE 0x_fFFF /* PMTBS register (default) */ -#define PORT_TOKEN_RATE 1023 /* PTTBRC register (default) */ - -/* MAC accepet/reject macros */ -#define ACCEPT_MAC_ADDR 0 -#define REJECT_MAC_ADDR 1 - -/* Size of a Tx/Rx descriptor used in chain list data structure */ -#define RX_DESC_ALIGNED_SIZE 0x20 -#define TX_DESC_ALIGNED_SIZE 0x20 - -/* An offest in Tx descriptors to store data for buffers less than 8 Bytes */ -#define TX_BUF_OFFSET_IN_DESC 0x18 -/* Buffer offset from buffer pointer */ -#define RX_BUF_OFFSET 0x2 - -/* Gap define */ -#define ETH_BAR_GAP 0x8 -#define ETH_SIZE_REG_GAP 0x8 -#define ETH_HIGH_ADDR_REMAP_REG_GAP 0x4 -#define ETH_PORT_ACCESS_CTRL_GAP 0x4 - -/* Gigabit Ethernet Unit Global Registers */ - -/* MIB Counters register definitions */ -#define ETH_MIB_GOOD_OCTETS_RECEIVED_LOW 0x0 -#define ETH_MIB_GOOD_OCTETS_RECEIVED_HIGH 0x4 -#define ETH_MIB_BAD_OCTETS_RECEIVED 0x8 -#define ETH_MIB_INTERNAL_MAC_TRANSMIT_ERR 0xc -#define ETH_MIB_GOOD_FRAMES_RECEIVED 0x10 -#define ETH_MIB_BAD_FRAMES_RECEIVED 0x14 -#define ETH_MIB_BROADCAST_FRAMES_RECEIVED 0x18 -#define ETH_MIB_MULTICAST_FRAMES_RECEIVED 0x1c -#define ETH_MIB_FRAMES_64_OCTETS 0x20 -#define ETH_MIB_FRAMES_65_TO_127_OCTETS 0x24 -#define ETH_MIB_FRAMES_128_TO_255_OCTETS 0x28 -#define ETH_MIB_FRAMES_256_TO_511_OCTETS 0x2c -#define ETH_MIB_FRAMES_512_TO_1023_OCTETS 0x30 -#define ETH_MIB_FRAMES_1024_TO_MAX_OCTETS 0x34 -#define ETH_MIB_GOOD_OCTETS_SENT_LOW 0x38 -#define ETH_MIB_GOOD_OCTETS_SENT_HIGH 0x3c -#define ETH_MIB_GOOD_FRAMES_SENT 0x40 -#define ETH_MIB_EXCESSIVE_COLLISION 0x44 -#define ETH_MIB_MULTICAST_FRAMES_SENT 0x48 -#define ETH_MIB_BROADCAST_FRAMES_SENT 0x4c -#define ETH_MIB_UNREC_MAC_CONTROL_RECEIVED 0x50 -#define ETH_MIB_FC_SENT 0x54 -#define ETH_MIB_GOOD_FC_RECEIVED 0x58 -#define ETH_MIB_BAD_FC_RECEIVED 0x5c -#define ETH_MIB_UNDERSIZE_RECEIVED 0x60 -#define ETH_MIB_FRAGMENTS_RECEIVED 0x64 -#define ETH_MIB_OVERSIZE_RECEIVED 0x68 -#define ETH_MIB_JABBER_RECEIVED 0x6c -#define ETH_MIB_MAC_RECEIVE_ERROR 0x70 -#define ETH_MIB_BAD_CRC_EVENT 0x74 -#define ETH_MIB_COLLISION 0x78 -#define ETH_MIB_LATE_COLLISION 0x7c - -/* Port serial status reg (PSR) */ -#define ETH_INTERFACE_GMII_MII 0 -#define ETH_INTERFACE_PCM BIT0 -#define ETH_LINK_IS_DOWN 0 -#define ETH_LINK_IS_UP BIT1 -#define ETH_PORT_AT_HALF_DUPLEX 0 -#define ETH_PORT_AT_FULL_DUPLEX BIT2 -#define ETH_RX_FLOW_CTRL_DISABLED 0 -#define ETH_RX_FLOW_CTRL_ENBALED BIT3 -#define ETH_GMII_SPEED_100_10 0 -#define ETH_GMII_SPEED_1000 BIT4 -#define ETH_MII_SPEED_10 0 -#define ETH_MII_SPEED_100 BIT5 -#define ETH_NO_TX 0 -#define ETH_TX_IN_PROGRESS BIT7 -#define ETH_BYPASS_NO_ACTIVE 0 -#define ETH_BYPASS_ACTIVE BIT8 -#define ETH_PORT_NOT_AT_PARTITION_STATE 0 -#define ETH_PORT_AT_PARTITION_STATE BIT9 -#define ETH_PORT_TX_FIFO_NOT_EMPTY 0 -#define ETH_PORT_TX_FIFO_EMPTY BIT10 - - -/* These macros describes the Port configuration reg (Px_cR) bits */ -#define ETH_UNICAST_NORMAL_MODE 0 -#define ETH_UNICAST_PROMISCUOUS_MODE BIT0 -#define ETH_DEFAULT_RX_QUEUE_0 0 -#define ETH_DEFAULT_RX_QUEUE_1 BIT1 -#define ETH_DEFAULT_RX_QUEUE_2 BIT2 -#define ETH_DEFAULT_RX_QUEUE_3 (BIT2 | BIT1) -#define ETH_DEFAULT_RX_QUEUE_4 BIT3 -#define ETH_DEFAULT_RX_QUEUE_5 (BIT3 | BIT1) -#define ETH_DEFAULT_RX_QUEUE_6 (BIT3 | BIT2) -#define ETH_DEFAULT_RX_QUEUE_7 (BIT3 | BIT2 | BIT1) -#define ETH_DEFAULT_RX_ARP_QUEUE_0 0 -#define ETH_DEFAULT_RX_ARP_QUEUE_1 BIT4 -#define ETH_DEFAULT_RX_ARP_QUEUE_2 BIT5 -#define ETH_DEFAULT_RX_ARP_QUEUE_3 (BIT5 | BIT4) -#define ETH_DEFAULT_RX_ARP_QUEUE_4 BIT6 -#define ETH_DEFAULT_RX_ARP_QUEUE_5 (BIT6 | BIT4) -#define ETH_DEFAULT_RX_ARP_QUEUE_6 (BIT6 | BIT5) -#define ETH_DEFAULT_RX_ARP_QUEUE_7 (BIT6 | BIT5 | BIT4) -#define ETH_RECEIVE_BC_IF_NOT_IP_OR_ARP 0 -#define ETH_REJECT_BC_IF_NOT_IP_OR_ARP BIT7 -#define ETH_RECEIVE_BC_IF_IP 0 -#define ETH_REJECT_BC_IF_IP BIT8 -#define ETH_RECEIVE_BC_IF_ARP 0 -#define ETH_REJECT_BC_IF_ARP BIT9 -#define ETH_TX_AM_NO_UPDATE_ERROR_SUMMARY BIT12 -#define ETH_CAPTURE_TCP_FRAMES_DIS 0 -#define ETH_CAPTURE_TCP_FRAMES_EN BIT14 -#define ETH_CAPTURE_UDP_FRAMES_DIS 0 -#define ETH_CAPTURE_UDP_FRAMES_EN BIT15 -#define ETH_DEFAULT_RX_TCP_QUEUE_0 0 -#define ETH_DEFAULT_RX_TCP_QUEUE_1 BIT16 -#define ETH_DEFAULT_RX_TCP_QUEUE_2 BIT17 -#define ETH_DEFAULT_RX_TCP_QUEUE_3 (BIT17 | BIT16) -#define ETH_DEFAULT_RX_TCP_QUEUE_4 BIT18 -#define ETH_DEFAULT_RX_TCP_QUEUE_5 (BIT18 | BIT16) -#define ETH_DEFAULT_RX_TCP_QUEUE_6 (BIT18 | BIT17) -#define ETH_DEFAULT_RX_TCP_QUEUE_7 (BIT18 | BIT17 | BIT16) -#define ETH_DEFAULT_RX_UDP_QUEUE_0 0 -#define ETH_DEFAULT_RX_UDP_QUEUE_1 BIT19 -#define ETH_DEFAULT_RX_UDP_QUEUE_2 BIT20 -#define ETH_DEFAULT_RX_UDP_QUEUE_3 (BIT20 | BIT19) -#define ETH_DEFAULT_RX_UDP_QUEUE_4 (BIT21 -#define ETH_DEFAULT_RX_UDP_QUEUE_5 (BIT21 | BIT19) -#define ETH_DEFAULT_RX_UDP_QUEUE_6 (BIT21 | BIT20) -#define ETH_DEFAULT_RX_UDP_QUEUE_7 (BIT21 | BIT20 | BIT19) -#define ETH_DEFAULT_RX_BPDU_QUEUE_0 0 -#define ETH_DEFAULT_RX_BPDU_QUEUE_1 BIT22 -#define ETH_DEFAULT_RX_BPDU_QUEUE_2 BIT23 -#define ETH_DEFAULT_RX_BPDU_QUEUE_3 (BIT23 | BIT22) -#define ETH_DEFAULT_RX_BPDU_QUEUE_4 BIT24 -#define ETH_DEFAULT_RX_BPDU_QUEUE_5 (BIT24 | BIT22) -#define ETH_DEFAULT_RX_BPDU_QUEUE_6 (BIT24 | BIT23) -#define ETH_DEFAULT_RX_BPDU_QUEUE_7 (BIT24 | BIT23 | BIT22) - - -/* These macros describes the Port configuration extend reg (Px_cXR) bits*/ -#define ETH_CLASSIFY_EN BIT0 -#define ETH_SPAN_BPDU_PACKETS_AS_NORMAL 0 -#define ETH_SPAN_BPDU_PACKETS_TO_RX_QUEUE_7 BIT1 -#define ETH_PARTITION_DISABLE 0 -#define ETH_PARTITION_ENABLE BIT2 - - -/* Tx/Rx queue command reg (RQCR/TQCR)*/ -#define ETH_QUEUE_0_ENABLE BIT0 -#define ETH_QUEUE_1_ENABLE BIT1 -#define ETH_QUEUE_2_ENABLE BIT2 -#define ETH_QUEUE_3_ENABLE BIT3 -#define ETH_QUEUE_4_ENABLE BIT4 -#define ETH_QUEUE_5_ENABLE BIT5 -#define ETH_QUEUE_6_ENABLE BIT6 -#define ETH_QUEUE_7_ENABLE BIT7 -#define ETH_QUEUE_0_DISABLE BIT8 -#define ETH_QUEUE_1_DISABLE BIT9 -#define ETH_QUEUE_2_DISABLE BIT10 -#define ETH_QUEUE_3_DISABLE BIT11 -#define ETH_QUEUE_4_DISABLE BIT12 -#define ETH_QUEUE_5_DISABLE BIT13 -#define ETH_QUEUE_6_DISABLE BIT14 -#define ETH_QUEUE_7_DISABLE BIT15 - -/* These macros describes the Port Sdma configuration reg (SDCR) bits */ -#define ETH_RIFB BIT0 -#define ETH_RX_BURST_SIZE_1_64BIT 0 -#define ETH_RX_BURST_SIZE_2_64BIT BIT1 -#define ETH_RX_BURST_SIZE_4_64BIT BIT2 -#define ETH_RX_BURST_SIZE_8_64BIT (BIT2 | BIT1) -#define ETH_RX_BURST_SIZE_16_64BIT BIT3 -#define ETH_BLM_RX_NO_SWAP BIT4 -#define ETH_BLM_RX_BYTE_SWAP 0 -#define ETH_BLM_TX_NO_SWAP BIT5 -#define ETH_BLM_TX_BYTE_SWAP 0 -#define ETH_DESCRIPTORS_BYTE_SWAP BIT6 -#define ETH_DESCRIPTORS_NO_SWAP 0 -#define ETH_TX_BURST_SIZE_1_64BIT 0 -#define ETH_TX_BURST_SIZE_2_64BIT BIT22 -#define ETH_TX_BURST_SIZE_4_64BIT BIT23 -#define ETH_TX_BURST_SIZE_8_64BIT (BIT23 | BIT22) -#define ETH_TX_BURST_SIZE_16_64BIT BIT24 - -/* These macros describes the Port serial control reg (PSCR) bits */ -#define ETH_SERIAL_PORT_DISABLE 0 -#define ETH_SERIAL_PORT_ENABLE BIT0 -#define ETH_FORCE_LINK_PASS BIT1 -#define ETH_DO_NOT_FORCE_LINK_PASS 0 -#define ETH_ENABLE_AUTO_NEG_FOR_DUPLX 0 -#define ETH_DISABLE_AUTO_NEG_FOR_DUPLX BIT2 -#define ETH_ENABLE_AUTO_NEG_FOR_FLOW_CTRL 0 -#define ETH_DISABLE_AUTO_NEG_FOR_FLOW_CTRL BIT3 -#define ETH_ADV_NO_FLOW_CTRL 0 -#define ETH_ADV_SYMMETRIC_FLOW_CTRL BIT4 -#define ETH_FORCE_FC_MODE_NO_PAUSE_DIS_TX 0 -#define ETH_FORCE_FC_MODE_TX_PAUSE_DIS BIT5 -#define ETH_FORCE_BP_MODE_NO_JAM 0 -#define ETH_FORCE_BP_MODE_JAM_TX BIT7 -#define ETH_FORCE_BP_MODE_JAM_TX_ON_RX_ERR BIT8 -#define ETH_FORCE_LINK_FAIL 0 -#define ETH_DO_NOT_FORCE_LINK_FAIL BIT10 -#define ETH_RETRANSMIT_16_ETTEMPTS 0 -#define ETH_RETRANSMIT_FOREVER BIT11 -#define ETH_DISABLE_AUTO_NEG_SPEED_GMII BIT13 -#define ETH_ENABLE_AUTO_NEG_SPEED_GMII 0 -#define ETH_DTE_ADV_0 0 -#define ETH_DTE_ADV_1 BIT14 -#define ETH_DISABLE_AUTO_NEG_BYPASS 0 -#define ETH_ENABLE_AUTO_NEG_BYPASS BIT15 -#define ETH_AUTO_NEG_NO_CHANGE 0 -#define ETH_RESTART_AUTO_NEG BIT16 -#define ETH_MAX_RX_PACKET_1518BYTE 0 -#define ETH_MAX_RX_PACKET_1522BYTE BIT17 -#define ETH_MAX_RX_PACKET_1552BYTE BIT18 -#define ETH_MAX_RX_PACKET_9022BYTE (BIT18 | BIT17) -#define ETH_MAX_RX_PACKET_9192BYTE BIT19 -#define ETH_MAX_RX_PACKET_9700BYTE (BIT19 | BIT17) -#define ETH_SET_EXT_LOOPBACK BIT20 -#define ETH_CLR_EXT_LOOPBACK 0 -#define ETH_SET_FULL_DUPLEX_MODE BIT21 -#define ETH_SET_HALF_DUPLEX_MODE 0 -#define ETH_ENABLE_FLOW_CTRL_TX_RX_IN_FULL_DUPLEX BIT22 -#define ETH_DISABLE_FLOW_CTRL_TX_RX_IN_FULL_DUPLEX 0 -#define ETH_SET_GMII_SPEED_TO_10_100 0 -#define ETH_SET_GMII_SPEED_TO_1000 BIT23 -#define ETH_SET_MII_SPEED_TO_10 0 -#define ETH_SET_MII_SPEED_TO_100 BIT24 - - -/* SMI reg */ -#define ETH_SMI_BUSY BIT28 /* 0 - Write, 1 - Read */ -#define ETH_SMI_READ_VALID BIT27 /* 0 - Write, 1 - Read */ -#define ETH_SMI_OPCODE_WRITE 0 /* Completion of Read operation */ -#define ETH_SMI_OPCODE_READ BIT26 /* Operation is in progress */ - -/* SDMA command status fields macros */ - -/* Tx & Rx descriptors status */ -#define ETH_ERROR_SUMMARY (BIT0) - -/* Tx & Rx descriptors command */ -#define ETH_BUFFER_OWNED_BY_DMA (BIT31) - -/* Tx descriptors status */ -#define ETH_LC_ERROR (0 ) -#define ETH_UR_ERROR (BIT1 ) -#define ETH_RL_ERROR (BIT2 ) -#define ETH_LLC_SNAP_FORMAT (BIT9 ) - -/* Rx descriptors status */ -#define ETH_CRC_ERROR (0 ) -#define ETH_OVERRUN_ERROR (BIT1 ) -#define ETH_MAX_FRAME_LENGTH_ERROR (BIT2 ) -#define ETH_RESOURCE_ERROR ((BIT2 | BIT1)) -#define ETH_VLAN_TAGGED (BIT19) -#define ETH_BPDU_FRAME (BIT20) -#define ETH_TCP_FRAME_OVER_IP_V_4 (0 ) -#define ETH_UDP_FRAME_OVER_IP_V_4 (BIT21) -#define ETH_OTHER_FRAME_TYPE (BIT22) -#define ETH_LAYER_2_IS_ETH_V_2 (BIT23) -#define ETH_FRAME_TYPE_IP_V_4 (BIT24) -#define ETH_FRAME_HEADER_OK (BIT25) -#define ETH_RX_LAST_DESC (BIT26) -#define ETH_RX_FIRST_DESC (BIT27) -#define ETH_UNKNOWN_DESTINATION_ADDR (BIT28) -#define ETH_RX_ENABLE_INTERRUPT (BIT29) -#define ETH_LAYER_4_CHECKSUM_OK (BIT30) - -/* Rx descriptors byte count */ -#define ETH_FRAME_FRAGMENTED (BIT2) - -/* Tx descriptors command */ -#define ETH_LAYER_4_CHECKSUM_FIRST_DESC (BIT10) -#define ETH_FRAME_SET_TO_VLAN (BIT15) -#define ETH_TCP_FRAME (0 ) -#define ETH_UDP_FRAME (BIT16) -#define ETH_GEN_TCP_UDP_CHECKSUM (BIT17) -#define ETH_GEN_IP_V_4_CHECKSUM (BIT18) -#define ETH_ZERO_PADDING (BIT19) -#define ETH_TX_LAST_DESC (BIT20) -#define ETH_TX_FIRST_DESC (BIT21) -#define ETH_GEN_CRC (BIT22) -#define ETH_TX_ENABLE_INTERRUPT (BIT23) -#define ETH_AUTO_MODE (BIT30) - -/* Address decode parameters */ -/* Ethernet Base Address Register bits */ -#define EBAR_TARGET_DRAM 0x00000000 -#define EBAR_TARGET_DEVICE 0x00000001 -#define EBAR_TARGET_CBS 0x00000002 -#define EBAR_TARGET_PCI0 0x00000003 -#define EBAR_TARGET_PCI1 0x00000004 -#define EBAR_TARGET_CUNIT 0x00000005 -#define EBAR_TARGET_AUNIT 0x00000006 -#define EBAR_TARGET_GUNIT 0x00000007 - -/* Window attributes */ -#define EBAR_ATTR_DRAM_CS0 0x00000E00 -#define EBAR_ATTR_DRAM_CS1 0x00000D00 -#define EBAR_ATTR_DRAM_CS2 0x00000B00 -#define EBAR_ATTR_DRAM_CS3 0x00000700 - -/* DRAM Target interface */ -#define EBAR_ATTR_DRAM_NO_CACHE_COHERENCY 0x00000000 -#define EBAR_ATTR_DRAM_CACHE_COHERENCY_WT 0x00001000 -#define EBAR_ATTR_DRAM_CACHE_COHERENCY_WB 0x00002000 - -/* Device Bus Target interface */ -#define EBAR_ATTR_DEVICE_DEVCS0 0x00001E00 -#define EBAR_ATTR_DEVICE_DEVCS1 0x00001D00 -#define EBAR_ATTR_DEVICE_DEVCS2 0x00001B00 -#define EBAR_ATTR_DEVICE_DEVCS3 0x00001700 -#define EBAR_ATTR_DEVICE_BOOTCS3 0x00000F00 - -/* PCI Target interface */ -#define EBAR_ATTR_PCI_BYTE_SWAP 0x00000000 -#define EBAR_ATTR_PCI_NO_SWAP 0x00000100 -#define EBAR_ATTR_PCI_BYTE_WORD_SWAP 0x00000200 -#define EBAR_ATTR_PCI_WORD_SWAP 0x00000300 -#define EBAR_ATTR_PCI_NO_SNOOP_NOT_ASSERT 0x00000000 -#define EBAR_ATTR_PCI_NO_SNOOP_ASSERT 0x00000400 -#define EBAR_ATTR_PCI_IO_SPACE 0x00000000 -#define EBAR_ATTR_PCI_MEMORY_SPACE 0x00000800 -#define EBAR_ATTR_PCI_REQ64_FORCE 0x00000000 -#define EBAR_ATTR_PCI_REQ64_SIZE 0x00001000 - -/* CPU 60x bus or internal SRAM interface */ -#define EBAR_ATTR_CBS_SRAM_BLOCK0 0x00000000 -#define EBAR_ATTR_CBS_SRAM_BLOCK1 0x00000100 -#define EBAR_ATTR_CBS_SRAM 0x00000000 -#define EBAR_ATTR_CBS_CPU_BUS 0x00000800 - -/* Window access control */ -#define EWIN_ACCESS_NOT_ALLOWED 0 -#define EWIN_ACCESS_READ_ONLY BIT0 -#define EWIN_ACCESS_FULL (BIT1 | BIT0) -#define EWIN0_ACCESS_MASK 0x0003 -#define EWIN1_ACCESS_MASK 0x000C -#define EWIN2_ACCESS_MASK 0x0030 -#define EWIN3_ACCESS_MASK 0x00C0 - -/* typedefs */ - -typedef enum _eth_port -{ - ETH_0 = 0, - ETH_1 = 1, - ETH_2 = 2 -}ETH_PORT; - -typedef enum _eth_func_ret_status -{ - ETH_OK, /* Returned as expected. */ - ETH_ERROR, /* Fundamental error. */ - ETH_RETRY, /* Could not process request. Try later. */ - ETH_END_OF_JOB, /* Ring has nothing to process. */ - ETH_QUEUE_FULL, /* Ring resource error. */ - ETH_QUEUE_LAST_RESOURCE /* Ring resources about to exhaust. */ -}ETH_FUNC_RET_STATUS; - -typedef enum _eth_queue -{ - ETH_Q0 = 0, - ETH_Q1 = 1, - ETH_Q2 = 2, - ETH_Q3 = 3, - ETH_Q4 = 4, - ETH_Q5 = 5, - ETH_Q6 = 6, - ETH_Q7 = 7 -} ETH_QUEUE; - -typedef enum _addr_win -{ - ETH_WIN0, - ETH_WIN1, - ETH_WIN2, - ETH_WIN3, - ETH_WIN4, - ETH_WIN5 -} ETH_ADDR_WIN; - -typedef enum _eth_target -{ - ETH_TARGET_DRAM , - ETH_TARGET_DEVICE, - ETH_TARGET_CBS , - ETH_TARGET_PCI0 , - ETH_TARGET_PCI1 -}ETH_TARGET; - -typedef struct _eth_rx_desc -{ - unsigned short byte_cnt ; /* Descriptor buffer byte count */ - unsigned short buf_size ; /* Buffer size */ - unsigned int cmd_sts ; /* Descriptor command status */ - unsigned int next_desc_ptr; /* Next descriptor pointer */ - unsigned int buf_ptr ; /* Descriptor buffer pointer */ - unsigned int return_info ; /* User resource return information */ -} ETH_RX_DESC; - - -typedef struct _eth_tx_desc -{ - unsigned short byte_cnt ; /* Descriptor buffer byte count */ - unsigned short l4i_chk ; /* CPU provided TCP Checksum */ - unsigned int cmd_sts ; /* Descriptor command status */ - unsigned int next_desc_ptr; /* Next descriptor pointer */ - unsigned int buf_ptr ; /* Descriptor buffer pointer */ - unsigned int return_info ; /* User resource return information */ -} ETH_TX_DESC; - -/* Unified struct for Rx and Tx operations. The user is not required to */ -/* be familier with neither Tx nor Rx descriptors. */ -typedef struct _pkt_info -{ - unsigned short byte_cnt ; /* Descriptor buffer byte count */ - unsigned short l4i_chk ; /* Tx CPU provided TCP Checksum */ - unsigned int cmd_sts ; /* Descriptor command status */ - unsigned int buf_ptr ; /* Descriptor buffer pointer */ - unsigned int return_info ; /* User resource return information */ -} PKT_INFO; - - -typedef struct _eth_win_param -{ - ETH_ADDR_WIN win; /* Window number. See ETH_ADDR_WIN enum */ - ETH_TARGET target; /* System targets. See ETH_TARGET enum */ - unsigned short attributes; /* BAR attributes. See above macros. */ - unsigned int base_addr; /* Window base address in unsigned int form */ - unsigned int high_addr; /* Window high address in unsigned int form */ - unsigned int size; /* Size in MBytes. Must be % 64Kbyte. */ - bool enable; /* Enable/disable access to the window. */ - unsigned short access_ctrl; /* Access ctrl register. see above macros */ -} ETH_WIN_PARAM; - - -/* Ethernet port specific infomation */ - -typedef struct _eth_port_ctrl -{ - ETH_PORT port_num; /* User Ethernet port number */ - int port_phy_addr; /* User phy address of Ethrnet port */ - unsigned char port_mac_addr[6]; /* User defined port MAC address. */ - unsigned int port_config; /* User port configuration value */ - unsigned int port_config_extend; /* User port config extend value */ - unsigned int port_sdma_config; /* User port SDMA config value */ - unsigned int port_serial_control; /* User port serial control value */ - unsigned int port_tx_queue_command; /* Port active Tx queues summary */ - unsigned int port_rx_queue_command; /* Port active Rx queues summary */ - - /* User function to cast virtual address to CPU bus address */ - unsigned int (*port_virt_to_phys)(unsigned int addr); - /* User scratch pad for user specific data structures */ - void *port_private; - - bool rx_resource_err[MAX_RX_QUEUE_NUM]; /* Rx ring resource error flag */ - bool tx_resource_err[MAX_TX_QUEUE_NUM]; /* Tx ring resource error flag */ - - /* Tx/Rx rings managment indexes fields. For driver use */ - - /* Next available Rx resource */ - volatile ETH_RX_DESC *p_rx_curr_desc_q[MAX_RX_QUEUE_NUM]; - /* Returning Rx resource */ - volatile ETH_RX_DESC *p_rx_used_desc_q[MAX_RX_QUEUE_NUM]; - - /* Next available Tx resource */ - volatile ETH_TX_DESC *p_tx_curr_desc_q[MAX_TX_QUEUE_NUM]; - /* Returning Tx resource */ - volatile ETH_TX_DESC *p_tx_used_desc_q[MAX_TX_QUEUE_NUM]; - /* An extra Tx index to support transmit of multiple buffers per packet */ - volatile ETH_TX_DESC *p_tx_first_desc_q[MAX_TX_QUEUE_NUM]; - - /* Tx/Rx rings size and base variables fields. For driver use */ - - volatile ETH_RX_DESC *p_rx_desc_area_base[MAX_RX_QUEUE_NUM]; - unsigned int rx_desc_area_size[MAX_RX_QUEUE_NUM]; - char *p_rx_buffer_base[MAX_RX_QUEUE_NUM]; - - volatile ETH_TX_DESC *p_tx_desc_area_base[MAX_TX_QUEUE_NUM]; - unsigned int tx_desc_area_size[MAX_TX_QUEUE_NUM]; - char *p_tx_buffer_base[MAX_TX_QUEUE_NUM]; - -} ETH_PORT_INFO; - - -/* ethernet.h API list */ - -/* Port operation control routines */ -static void eth_port_init (ETH_PORT_INFO *p_eth_port_ctrl); -static void eth_port_reset(ETH_PORT eth_port_num); -static bool eth_port_start(ETH_PORT_INFO *p_eth_port_ctrl); - - -/* Port MAC address routines */ -static void eth_port_uc_addr_set (ETH_PORT eth_port_num, - unsigned char *p_addr, - ETH_QUEUE queue); -#if 0 /* FIXME */ -static void eth_port_mc_addr (ETH_PORT eth_port_num, - unsigned char *p_addr, - ETH_QUEUE queue, - int option); -#endif - -/* PHY and MIB routines */ -static bool ethernet_phy_reset(ETH_PORT eth_port_num); - -static bool eth_port_write_smi_reg(ETH_PORT eth_port_num, - unsigned int phy_reg, - unsigned int value); - -static bool eth_port_read_smi_reg(ETH_PORT eth_port_num, - unsigned int phy_reg, - unsigned int* value); - -static void eth_clear_mib_counters(ETH_PORT eth_port_num); - -/* Port data flow control routines */ -static ETH_FUNC_RET_STATUS eth_port_send (ETH_PORT_INFO *p_eth_port_ctrl, - ETH_QUEUE tx_queue, - PKT_INFO *p_pkt_info); -static ETH_FUNC_RET_STATUS eth_tx_return_desc(ETH_PORT_INFO *p_eth_port_ctrl, - ETH_QUEUE tx_queue, - PKT_INFO *p_pkt_info); -static ETH_FUNC_RET_STATUS eth_port_receive (ETH_PORT_INFO *p_eth_port_ctrl, - ETH_QUEUE rx_queue, - PKT_INFO *p_pkt_info); -static ETH_FUNC_RET_STATUS eth_rx_return_buff(ETH_PORT_INFO *p_eth_port_ctrl, - ETH_QUEUE rx_queue, - PKT_INFO *p_pkt_info); - - -static bool ether_init_tx_desc_ring(ETH_PORT_INFO *p_eth_port_ctrl, - ETH_QUEUE tx_queue, - int tx_desc_num, - int tx_buff_size, - unsigned int tx_desc_base_addr, - unsigned int tx_buff_base_addr); - -static bool ether_init_rx_desc_ring(ETH_PORT_INFO *p_eth_port_ctrl, - ETH_QUEUE rx_queue, - int rx_desc_num, - int rx_buff_size, - unsigned int rx_desc_base_addr, - unsigned int rx_buff_base_addr); - -#endif /* MV64460_ETH_ */ diff --git a/board/prodrive/p3mx/mv_regs.h b/board/prodrive/p3mx/mv_regs.h deleted file mode 100644 index 279a7e9610..0000000000 --- a/board/prodrive/p3mx/mv_regs.h +++ /dev/null @@ -1,1109 +0,0 @@ -/* - * (C) Copyright 2003 - * Ingo Assmus <ingo.assmus@keymile.com> - * - * based on - Driver for MV64460X ethernet ports - * Copyright (C) 2002 rabeeh@galileo.co.il - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -/******************************************************************************** -* gt64460r.h - GT-64460 Internal registers definition file. -* -* DESCRIPTION: -* None. -* -* DEPENDENCIES: -* None. -* -*******************************************************************************/ - -#ifndef __INCmv_regsh -#define __INCmv_regsh - -#define MV64460 - -/* Supported by the Atlantis */ -#define MV64460_INCLUDE_PCI_1 -#define MV64460_INCLUDE_PCI_0_ARBITER -#define MV64460_INCLUDE_PCI_1_ARBITER -#define MV64460_INCLUDE_SNOOP_SUPPORT -#define MV64460_INCLUDE_P2P -#define MV64460_INCLUDE_ETH_PORT_2 -#define MV64460_INCLUDE_CPU_MAPPING -#define MV64460_INCLUDE_MPSC - -/* Not supported features */ -#undef INCLUDE_CNTMR_4_7 -#undef INCLUDE_DMA_4_7 - -/****************************************/ -/* Processor Address Space */ -/****************************************/ - -/* DDR SDRAM BAR and size registers */ - -#define MV64460_CS_0_BASE_ADDR 0x008 -#define MV64460_CS_0_SIZE 0x010 -#define MV64460_CS_1_BASE_ADDR 0x208 -#define MV64460_CS_1_SIZE 0x210 -#define MV64460_CS_2_BASE_ADDR 0x018 -#define MV64460_CS_2_SIZE 0x020 -#define MV64460_CS_3_BASE_ADDR 0x218 -#define MV64460_CS_3_SIZE 0x220 - -/* Devices BAR and size registers */ - -#define MV64460_DEV_CS0_BASE_ADDR 0x028 -#define MV64460_DEV_CS0_SIZE 0x030 -#define MV64460_DEV_CS1_BASE_ADDR 0x228 -#define MV64460_DEV_CS1_SIZE 0x230 -#define MV64460_DEV_CS2_BASE_ADDR 0x248 -#define MV64460_DEV_CS2_SIZE 0x250 -#define MV64460_DEV_CS3_BASE_ADDR 0x038 -#define MV64460_DEV_CS3_SIZE 0x040 -#define MV64460_BOOTCS_BASE_ADDR 0x238 -#define MV64460_BOOTCS_SIZE 0x240 - -/* PCI 0 BAR and size registers */ - -#define MV64460_PCI_0_IO_BASE_ADDR 0x048 -#define MV64460_PCI_0_IO_SIZE 0x050 -#define MV64460_PCI_0_MEMORY0_BASE_ADDR 0x058 -#define MV64460_PCI_0_MEMORY0_SIZE 0x060 -#define MV64460_PCI_0_MEMORY1_BASE_ADDR 0x080 -#define MV64460_PCI_0_MEMORY1_SIZE 0x088 -#define MV64460_PCI_0_MEMORY2_BASE_ADDR 0x258 -#define MV64460_PCI_0_MEMORY2_SIZE 0x260 -#define MV64460_PCI_0_MEMORY3_BASE_ADDR 0x280 -#define MV64460_PCI_0_MEMORY3_SIZE 0x288 - -/* PCI 1 BAR and size registers */ -#define MV64460_PCI_1_IO_BASE_ADDR 0x090 -#define MV64460_PCI_1_IO_SIZE 0x098 -#define MV64460_PCI_1_MEMORY0_BASE_ADDR 0x0a0 -#define MV64460_PCI_1_MEMORY0_SIZE 0x0a8 -#define MV64460_PCI_1_MEMORY1_BASE_ADDR 0x0b0 -#define MV64460_PCI_1_MEMORY1_SIZE 0x0b8 -#define MV64460_PCI_1_MEMORY2_BASE_ADDR 0x2a0 -#define MV64460_PCI_1_MEMORY2_SIZE 0x2a8 -#define MV64460_PCI_1_MEMORY3_BASE_ADDR 0x2b0 -#define MV64460_PCI_1_MEMORY3_SIZE 0x2b8 - -/* SRAM base address */ -#define MV64460_INTEGRATED_SRAM_BASE_ADDR 0x268 - -/* internal registers space base address */ -#define MV64460_INTERNAL_SPACE_BASE_ADDR 0x068 - -/* Enables the CS , DEV_CS , PCI 0 and PCI 1 - windows above */ -#define MV64460_BASE_ADDR_ENABLE 0x278 - -/****************************************/ -/* PCI remap registers */ -/****************************************/ - /* PCI 0 */ -#define MV64460_PCI_0_IO_ADDR_REMAP 0x0f0 -#define MV64460_PCI_0_MEMORY0_LOW_ADDR_REMAP 0x0f8 -#define MV64460_PCI_0_MEMORY0_HIGH_ADDR_REMAP 0x320 -#define MV64460_PCI_0_MEMORY1_LOW_ADDR_REMAP 0x100 -#define MV64460_PCI_0_MEMORY1_HIGH_ADDR_REMAP 0x328 -#define MV64460_PCI_0_MEMORY2_LOW_ADDR_REMAP 0x2f8 -#define MV64460_PCI_0_MEMORY2_HIGH_ADDR_REMAP 0x330 -#define MV64460_PCI_0_MEMORY3_LOW_ADDR_REMAP 0x300 -#define MV64460_PCI_0_MEMORY3_HIGH_ADDR_REMAP 0x338 - /* PCI 1 */ -#define MV64460_PCI_1_IO_ADDR_REMAP 0x108 -#define MV64460_PCI_1_MEMORY0_LOW_ADDR_REMAP 0x110 -#define MV64460_PCI_1_MEMORY0_HIGH_ADDR_REMAP 0x340 -#define MV64460_PCI_1_MEMORY1_LOW_ADDR_REMAP 0x118 -#define MV64460_PCI_1_MEMORY1_HIGH_ADDR_REMAP 0x348 -#define MV64460_PCI_1_MEMORY2_LOW_ADDR_REMAP 0x310 -#define MV64460_PCI_1_MEMORY2_HIGH_ADDR_REMAP 0x350 -#define MV64460_PCI_1_MEMORY3_LOW_ADDR_REMAP 0x318 -#define MV64460_PCI_1_MEMORY3_HIGH_ADDR_REMAP 0x358 - -#define MV64460_CPU_PCI_0_HEADERS_RETARGET_CONTROL 0x3b0 -#define MV64460_CPU_PCI_0_HEADERS_RETARGET_BASE 0x3b8 -#define MV64460_CPU_PCI_1_HEADERS_RETARGET_CONTROL 0x3c0 -#define MV64460_CPU_PCI_1_HEADERS_RETARGET_BASE 0x3c8 -#define MV64460_CPU_GE_HEADERS_RETARGET_CONTROL 0x3d0 -#define MV64460_CPU_GE_HEADERS_RETARGET_BASE 0x3d8 -#define MV64460_CPU_IDMA_HEADERS_RETARGET_CONTROL 0x3e0 -#define MV64460_CPU_IDMA_HEADERS_RETARGET_BASE 0x3e8 - -/****************************************/ -/* CPU Control Registers */ -/****************************************/ - -#define MV64460_CPU_CONFIG 0x000 -#define MV64460_CPU_MODE 0x120 -#define MV64460_CPU_MASTER_CONTROL 0x160 -#define MV64460_CPU_CROSS_BAR_CONTROL_LOW 0x150 -#define MV64460_CPU_CROSS_BAR_CONTROL_HIGH 0x158 -#define MV64460_CPU_CROSS_BAR_TIMEOUT 0x168 - -/****************************************/ -/* SMP RegisterS */ -/****************************************/ - -#define MV64460_SMP_WHO_AM_I 0x200 -#define MV64460_SMP_CPU0_DOORBELL 0x214 -#define MV64460_SMP_CPU0_DOORBELL_CLEAR 0x21C -#define MV64460_SMP_CPU1_DOORBELL 0x224 -#define MV64460_SMP_CPU1_DOORBELL_CLEAR 0x22C -#define MV64460_SMP_CPU0_DOORBELL_MASK 0x234 -#define MV64460_SMP_CPU1_DOORBELL_MASK 0x23C -#define MV64460_SMP_SEMAPHOR0 0x244 -#define MV64460_SMP_SEMAPHOR1 0x24c -#define MV64460_SMP_SEMAPHOR2 0x254 -#define MV64460_SMP_SEMAPHOR3 0x25c -#define MV64460_SMP_SEMAPHOR4 0x264 -#define MV64460_SMP_SEMAPHOR5 0x26c -#define MV64460_SMP_SEMAPHOR6 0x274 -#define MV64460_SMP_SEMAPHOR7 0x27c - -/****************************************/ -/* CPU Sync Barrier Register */ -/****************************************/ - -#define MV64460_CPU_0_SYNC_BARRIER_TRIGGER 0x0c0 -#define MV64460_CPU_0_SYNC_BARRIER_VIRTUAL 0x0c8 -#define MV64460_CPU_1_SYNC_BARRIER_TRIGGER 0x0d0 -#define MV64460_CPU_1_SYNC_BARRIER_VIRTUAL 0x0d8 - -/****************************************/ -/* CPU Access Protect */ -/****************************************/ - -#define MV64460_CPU_PROTECT_WINDOW_0_BASE_ADDR 0x180 -#define MV64460_CPU_PROTECT_WINDOW_0_SIZE 0x188 -#define MV64460_CPU_PROTECT_WINDOW_1_BASE_ADDR 0x190 -#define MV64460_CPU_PROTECT_WINDOW_1_SIZE 0x198 -#define MV64460_CPU_PROTECT_WINDOW_2_BASE_ADDR 0x1a0 -#define MV64460_CPU_PROTECT_WINDOW_2_SIZE 0x1a8 -#define MV64460_CPU_PROTECT_WINDOW_3_BASE_ADDR 0x1b0 -#define MV64460_CPU_PROTECT_WINDOW_3_SIZE 0x1b8 - - -/****************************************/ -/* CPU Error Report */ -/****************************************/ - -#define MV64460_CPU_ERROR_ADDR_LOW 0x070 -#define MV64460_CPU_ERROR_ADDR_HIGH 0x078 -#define MV64460_CPU_ERROR_DATA_LOW 0x128 -#define MV64460_CPU_ERROR_DATA_HIGH 0x130 -#define MV64460_CPU_ERROR_PARITY 0x138 -#define MV64460_CPU_ERROR_CAUSE 0x140 -#define MV64460_CPU_ERROR_MASK 0x148 - -/****************************************/ -/* CPU Interface Debug Registers */ -/****************************************/ - -#define MV64460_PUNIT_SLAVE_DEBUG_LOW 0x360 -#define MV64460_PUNIT_SLAVE_DEBUG_HIGH 0x368 -#define MV64460_PUNIT_MASTER_DEBUG_LOW 0x370 -#define MV64460_PUNIT_MASTER_DEBUG_HIGH 0x378 -#define MV64460_PUNIT_MMASK 0x3e4 - -/****************************************/ -/* Integrated SRAM Registers */ -/****************************************/ - -#define MV64460_SRAM_CONFIG 0x380 -#define MV64460_SRAM_TEST_MODE 0X3F4 -#define MV64460_SRAM_ERROR_CAUSE 0x388 -#define MV64460_SRAM_ERROR_ADDR 0x390 -#define MV64460_SRAM_ERROR_ADDR_HIGH 0X3F8 -#define MV64460_SRAM_ERROR_DATA_LOW 0x398 -#define MV64460_SRAM_ERROR_DATA_HIGH 0x3a0 -#define MV64460_SRAM_ERROR_DATA_PARITY 0x3a8 - -/****************************************/ -/* SDRAM Configuration */ -/****************************************/ - -#define MV64460_SDRAM_CONFIG 0x1400 -#define MV64460_D_UNIT_CONTROL_LOW 0x1404 -#define MV64460_D_UNIT_CONTROL_HIGH 0x1424 -#define MV64460_D_UNIT_MMASK 0x14B0 -#define MV64460_SDRAM_TIMING_CONTROL_LOW 0x1408 -#define MV64460_SDRAM_TIMING_CONTROL_HIGH 0x140c -#define MV64460_SDRAM_ADDR_CONTROL 0x1410 -#define MV64460_SDRAM_OPEN_PAGES_CONTROL 0x1414 -#define MV64460_SDRAM_OPERATION 0x1418 -#define MV64460_SDRAM_MODE 0x141c -#define MV64460_EXTENDED_DRAM_MODE 0x1420 -#define MV64460_SDRAM_CROSS_BAR_CONTROL_LOW 0x1430 -#define MV64460_SDRAM_CROSS_BAR_CONTROL_HIGH 0x1434 -#define MV64460_SDRAM_CROSS_BAR_TIMEOUT 0x1438 -#define MV64460_SDRAM_ADDR_CTRL_PADS_CALIBRATION 0x14c0 -#define MV64460_SDRAM_DATA_PADS_CALIBRATION 0x14c4 - -/****************************************/ -/* SDRAM Error Report */ -/****************************************/ - -#define MV64460_SDRAM_ERROR_DATA_LOW 0x1444 -#define MV64460_SDRAM_ERROR_DATA_HIGH 0x1440 -#define MV64460_SDRAM_ERROR_ADDR 0x1450 -#define MV64460_SDRAM_RECEIVED_ECC 0x1448 -#define MV64460_SDRAM_CALCULATED_ECC 0x144c -#define MV64460_SDRAM_ECC_CONTROL 0x1454 -#define MV64460_SDRAM_ECC_ERROR_COUNTER 0x1458 - -/******************************************/ -/* Controlled Delay Line (CDL) Registers */ -/******************************************/ - -#define MV64460_DFCDL_CONFIG0 0x1480 -#define MV64460_DFCDL_CONFIG1 0x1484 -#define MV64460_DLL_WRITE 0x1488 -#define MV64460_DLL_READ 0x148c -#define MV64460_SRAM_ADDR 0x1490 -#define MV64460_SRAM_DATA0 0x1494 -#define MV64460_SRAM_DATA1 0x1498 -#define MV64460_SRAM_DATA2 0x149c -#define MV64460_DFCL_PROBE 0x14a0 - -/******************************************/ -/* Debug Registers */ -/******************************************/ - -#define MV64460_DUNIT_DEBUG_LOW 0x1460 -#define MV64460_DUNIT_DEBUG_HIGH 0x1464 -#define MV64460_DUNIT_MMASK 0X1b40 - -/****************************************/ -/* Device Parameters */ -/****************************************/ - -#define MV64460_DEVICE_BANK0_PARAMETERS 0x45c -#define MV64460_DEVICE_BANK1_PARAMETERS 0x460 -#define MV64460_DEVICE_BANK2_PARAMETERS 0x464 -#define MV64460_DEVICE_BANK3_PARAMETERS 0x468 -#define MV64460_DEVICE_BOOT_BANK_PARAMETERS 0x46c -#define MV64460_DEVICE_INTERFACE_CONTROL 0x4c0 -#define MV64460_DEVICE_INTERFACE_CROSS_BAR_CONTROL_LOW 0x4c8 -#define MV64460_DEVICE_INTERFACE_CROSS_BAR_CONTROL_HIGH 0x4cc -#define MV64460_DEVICE_INTERFACE_CROSS_BAR_TIMEOUT 0x4c4 - -/****************************************/ -/* Device interrupt registers */ -/****************************************/ - -#define MV64460_DEVICE_INTERRUPT_CAUSE 0x4d0 -#define MV64460_DEVICE_INTERRUPT_MASK 0x4d4 -#define MV64460_DEVICE_ERROR_ADDR 0x4d8 -#define MV64460_DEVICE_ERROR_DATA 0x4dc -#define MV64460_DEVICE_ERROR_PARITY 0x4e0 - -/****************************************/ -/* Device debug registers */ -/****************************************/ - -#define MV64460_DEVICE_DEBUG_LOW 0x4e4 -#define MV64460_DEVICE_DEBUG_HIGH 0x4e8 -#define MV64460_RUNIT_MMASK 0x4f0 - -/****************************************/ -/* PCI Slave Address Decoding registers */ -/****************************************/ - -#define MV64460_PCI_0_CS_0_BANK_SIZE 0xc08 -#define MV64460_PCI_1_CS_0_BANK_SIZE 0xc88 -#define MV64460_PCI_0_CS_1_BANK_SIZE 0xd08 -#define MV64460_PCI_1_CS_1_BANK_SIZE 0xd88 -#define MV64460_PCI_0_CS_2_BANK_SIZE 0xc0c -#define MV64460_PCI_1_CS_2_BANK_SIZE 0xc8c -#define MV64460_PCI_0_CS_3_BANK_SIZE 0xd0c -#define MV64460_PCI_1_CS_3_BANK_SIZE 0xd8c -#define MV64460_PCI_0_DEVCS_0_BANK_SIZE 0xc10 -#define MV64460_PCI_1_DEVCS_0_BANK_SIZE 0xc90 -#define MV64460_PCI_0_DEVCS_1_BANK_SIZE 0xd10 -#define MV64460_PCI_1_DEVCS_1_BANK_SIZE 0xd90 -#define MV64460_PCI_0_DEVCS_2_BANK_SIZE 0xd18 -#define MV64460_PCI_1_DEVCS_2_BANK_SIZE 0xd98 -#define MV64460_PCI_0_DEVCS_3_BANK_SIZE 0xc14 -#define MV64460_PCI_1_DEVCS_3_BANK_SIZE 0xc94 -#define MV64460_PCI_0_DEVCS_BOOT_BANK_SIZE 0xd14 -#define MV64460_PCI_1_DEVCS_BOOT_BANK_SIZE 0xd94 -#define MV64460_PCI_0_P2P_MEM0_BAR_SIZE 0xd1c -#define MV64460_PCI_1_P2P_MEM0_BAR_SIZE 0xd9c -#define MV64460_PCI_0_P2P_MEM1_BAR_SIZE 0xd20 -#define MV64460_PCI_1_P2P_MEM1_BAR_SIZE 0xda0 -#define MV64460_PCI_0_P2P_I_O_BAR_SIZE 0xd24 -#define MV64460_PCI_1_P2P_I_O_BAR_SIZE 0xda4 -#define MV64460_PCI_0_CPU_BAR_SIZE 0xd28 -#define MV64460_PCI_1_CPU_BAR_SIZE 0xda8 -#define MV64460_PCI_0_INTERNAL_SRAM_BAR_SIZE 0xe00 -#define MV64460_PCI_1_INTERNAL_SRAM_BAR_SIZE 0xe80 -#define MV64460_PCI_0_EXPANSION_ROM_BAR_SIZE 0xd2c -#define MV64460_PCI_1_EXPANSION_ROM_BAR_SIZE 0xd9c -#define MV64460_PCI_0_BASE_ADDR_REG_ENABLE 0xc3c -#define MV64460_PCI_1_BASE_ADDR_REG_ENABLE 0xcbc -#define MV64460_PCI_0_CS_0_BASE_ADDR_REMAP 0xc48 -#define MV64460_PCI_1_CS_0_BASE_ADDR_REMAP 0xcc8 -#define MV64460_PCI_0_CS_1_BASE_ADDR_REMAP 0xd48 -#define MV64460_PCI_1_CS_1_BASE_ADDR_REMAP 0xdc8 -#define MV64460_PCI_0_CS_2_BASE_ADDR_REMAP 0xc4c -#define MV64460_PCI_1_CS_2_BASE_ADDR_REMAP 0xccc -#define MV64460_PCI_0_CS_3_BASE_ADDR_REMAP 0xd4c -#define MV64460_PCI_1_CS_3_BASE_ADDR_REMAP 0xdcc -#define MV64460_PCI_0_CS_0_BASE_HIGH_ADDR_REMAP 0xF04 -#define MV64460_PCI_1_CS_0_BASE_HIGH_ADDR_REMAP 0xF84 -#define MV64460_PCI_0_CS_1_BASE_HIGH_ADDR_REMAP 0xF08 -#define MV64460_PCI_1_CS_1_BASE_HIGH_ADDR_REMAP 0xF88 -#define MV64460_PCI_0_CS_2_BASE_HIGH_ADDR_REMAP 0xF0C -#define MV64460_PCI_1_CS_2_BASE_HIGH_ADDR_REMAP 0xF8C -#define MV64460_PCI_0_CS_3_BASE_HIGH_ADDR_REMAP 0xF10 -#define MV64460_PCI_1_CS_3_BASE_HIGH_ADDR_REMAP 0xF90 -#define MV64460_PCI_0_DEVCS_0_BASE_ADDR_REMAP 0xc50 -#define MV64460_PCI_1_DEVCS_0_BASE_ADDR_REMAP 0xcd0 -#define MV64460_PCI_0_DEVCS_1_BASE_ADDR_REMAP 0xd50 -#define MV64460_PCI_1_DEVCS_1_BASE_ADDR_REMAP 0xdd0 -#define MV64460_PCI_0_DEVCS_2_BASE_ADDR_REMAP 0xd58 -#define MV64460_PCI_1_DEVCS_2_BASE_ADDR_REMAP 0xdd8 -#define MV64460_PCI_0_DEVCS_3_BASE_ADDR_REMAP 0xc54 -#define MV64460_PCI_1_DEVCS_3_BASE_ADDR_REMAP 0xcd4 -#define MV64460_PCI_0_DEVCS_BOOTCS_BASE_ADDR_REMAP 0xd54 -#define MV64460_PCI_1_DEVCS_BOOTCS_BASE_ADDR_REMAP 0xdd4 -#define MV64460_PCI_0_P2P_MEM0_BASE_ADDR_REMAP_LOW 0xd5c -#define MV64460_PCI_1_P2P_MEM0_BASE_ADDR_REMAP_LOW 0xddc -#define MV64460_PCI_0_P2P_MEM0_BASE_ADDR_REMAP_HIGH 0xd60 -#define MV64460_PCI_1_P2P_MEM0_BASE_ADDR_REMAP_HIGH 0xde0 -#define MV64460_PCI_0_P2P_MEM1_BASE_ADDR_REMAP_LOW 0xd64 -#define MV64460_PCI_1_P2P_MEM1_BASE_ADDR_REMAP_LOW 0xde4 -#define MV64460_PCI_0_P2P_MEM1_BASE_ADDR_REMAP_HIGH 0xd68 -#define MV64460_PCI_1_P2P_MEM1_BASE_ADDR_REMAP_HIGH 0xde8 -#define MV64460_PCI_0_P2P_I_O_BASE_ADDR_REMAP 0xd6c -#define MV64460_PCI_1_P2P_I_O_BASE_ADDR_REMAP 0xdec -#define MV64460_PCI_0_CPU_BASE_ADDR_REMAP_LOW 0xd70 -#define MV64460_PCI_1_CPU_BASE_ADDR_REMAP_LOW 0xdf0 -#define MV64460_PCI_0_CPU_BASE_ADDR_REMAP_HIGH 0xd74 -#define MV64460_PCI_1_CPU_BASE_ADDR_REMAP_HIGH 0xdf4 -#define MV64460_PCI_0_INTEGRATED_SRAM_BASE_ADDR_REMAP 0xf00 -#define MV64460_PCI_1_INTEGRATED_SRAM_BASE_ADDR_REMAP 0xf80 -#define MV64460_PCI_0_EXPANSION_ROM_BASE_ADDR_REMAP 0xf38 -#define MV64460_PCI_1_EXPANSION_ROM_BASE_ADDR_REMAP 0xfb8 -#define MV64460_PCI_0_ADDR_DECODE_CONTROL 0xd3c -#define MV64460_PCI_1_ADDR_DECODE_CONTROL 0xdbc -#define MV64460_PCI_0_HEADERS_RETARGET_CONTROL 0xF40 -#define MV64460_PCI_1_HEADERS_RETARGET_CONTROL 0xFc0 -#define MV64460_PCI_0_HEADERS_RETARGET_BASE 0xF44 -#define MV64460_PCI_1_HEADERS_RETARGET_BASE 0xFc4 -#define MV64460_PCI_0_HEADERS_RETARGET_HIGH 0xF48 -#define MV64460_PCI_1_HEADERS_RETARGET_HIGH 0xFc8 - -/***********************************/ -/* PCI Control Register Map */ -/***********************************/ - -#define MV64460_PCI_0_DLL_STATUS_AND_COMMAND 0x1d20 -#define MV64460_PCI_1_DLL_STATUS_AND_COMMAND 0x1da0 -#define MV64460_PCI_0_MPP_PADS_DRIVE_CONTROL 0x1d1C -#define MV64460_PCI_1_MPP_PADS_DRIVE_CONTROL 0x1d9C -#define MV64460_PCI_0_COMMAND 0xc00 -#define MV64460_PCI_1_COMMAND 0xc80 -#define MV64460_PCI_0_MODE 0xd00 -#define MV64460_PCI_1_MODE 0xd80 -#define MV64460_PCI_0_RETRY 0xc04 -#define MV64460_PCI_1_RETRY 0xc84 -#define MV64460_PCI_0_READ_BUFFER_DISCARD_TIMER 0xd04 -#define MV64460_PCI_1_READ_BUFFER_DISCARD_TIMER 0xd84 -#define MV64460_PCI_0_MSI_TRIGGER_TIMER 0xc38 -#define MV64460_PCI_1_MSI_TRIGGER_TIMER 0xcb8 -#define MV64460_PCI_0_ARBITER_CONTROL 0x1d00 -#define MV64460_PCI_1_ARBITER_CONTROL 0x1d80 -#define MV64460_PCI_0_CROSS_BAR_CONTROL_LOW 0x1d08 -#define MV64460_PCI_1_CROSS_BAR_CONTROL_LOW 0x1d88 -#define MV64460_PCI_0_CROSS_BAR_CONTROL_HIGH 0x1d0c -#define MV64460_PCI_1_CROSS_BAR_CONTROL_HIGH 0x1d8c -#define MV64460_PCI_0_CROSS_BAR_TIMEOUT 0x1d04 -#define MV64460_PCI_1_CROSS_BAR_TIMEOUT 0x1d84 -#define MV64460_PCI_0_SYNC_BARRIER_TRIGGER_REG 0x1D18 -#define MV64460_PCI_1_SYNC_BARRIER_TRIGGER_REG 0x1D98 -#define MV64460_PCI_0_SYNC_BARRIER_VIRTUAL_REG 0x1d10 -#define MV64460_PCI_1_SYNC_BARRIER_VIRTUAL_REG 0x1d90 -#define MV64460_PCI_0_P2P_CONFIG 0x1d14 -#define MV64460_PCI_1_P2P_CONFIG 0x1d94 - -#define MV64460_PCI_0_ACCESS_CONTROL_BASE_0_LOW 0x1e00 -#define MV64460_PCI_0_ACCESS_CONTROL_BASE_0_HIGH 0x1e04 -#define MV64460_PCI_0_ACCESS_CONTROL_SIZE_0 0x1e08 -#define MV64460_PCI_0_ACCESS_CONTROL_BASE_1_LOW 0x1e10 -#define MV64460_PCI_0_ACCESS_CONTROL_BASE_1_HIGH 0x1e14 -#define MV64460_PCI_0_ACCESS_CONTROL_SIZE_1 0x1e18 -#define MV64460_PCI_0_ACCESS_CONTROL_BASE_2_LOW 0x1e20 -#define MV64460_PCI_0_ACCESS_CONTROL_BASE_2_HIGH 0x1e24 -#define MV64460_PCI_0_ACCESS_CONTROL_SIZE_2 0x1e28 -#define MV64460_PCI_0_ACCESS_CONTROL_BASE_3_LOW 0x1e30 -#define MV64460_PCI_0_ACCESS_CONTROL_BASE_3_HIGH 0x1e34 -#define MV64460_PCI_0_ACCESS_CONTROL_SIZE_3 0x1e38 -#define MV64460_PCI_0_ACCESS_CONTROL_BASE_4_LOW 0x1e40 -#define MV64460_PCI_0_ACCESS_CONTROL_BASE_4_HIGH 0x1e44 -#define MV64460_PCI_0_ACCESS_CONTROL_SIZE_4 0x1e48 -#define MV64460_PCI_0_ACCESS_CONTROL_BASE_5_LOW 0x1e50 -#define MV64460_PCI_0_ACCESS_CONTROL_BASE_5_HIGH 0x1e54 -#define MV64460_PCI_0_ACCESS_CONTROL_SIZE_5 0x1e58 - -#define MV64460_PCI_1_ACCESS_CONTROL_BASE_0_LOW 0x1e80 -#define MV64460_PCI_1_ACCESS_CONTROL_BASE_0_HIGH 0x1e84 -#define MV64460_PCI_1_ACCESS_CONTROL_SIZE_0 0x1e88 -#define MV64460_PCI_1_ACCESS_CONTROL_BASE_1_LOW 0x1e90 -#define MV64460_PCI_1_ACCESS_CONTROL_BASE_1_HIGH 0x1e94 -#define MV64460_PCI_1_ACCESS_CONTROL_SIZE_1 0x1e98 -#define MV64460_PCI_1_ACCESS_CONTROL_BASE_2_LOW 0x1ea0 -#define MV64460_PCI_1_ACCESS_CONTROL_BASE_2_HIGH 0x1ea4 -#define MV64460_PCI_1_ACCESS_CONTROL_SIZE_2 0x1ea8 -#define MV64460_PCI_1_ACCESS_CONTROL_BASE_3_LOW 0x1eb0 -#define MV64460_PCI_1_ACCESS_CONTROL_BASE_3_HIGH 0x1eb4 -#define MV64460_PCI_1_ACCESS_CONTROL_SIZE_3 0x1eb8 -#define MV64460_PCI_1_ACCESS_CONTROL_BASE_4_LOW 0x1ec0 -#define MV64460_PCI_1_ACCESS_CONTROL_BASE_4_HIGH 0x1ec4 -#define MV64460_PCI_1_ACCESS_CONTROL_SIZE_4 0x1ec8 -#define MV64460_PCI_1_ACCESS_CONTROL_BASE_5_LOW 0x1ed0 -#define MV64460_PCI_1_ACCESS_CONTROL_BASE_5_HIGH 0x1ed4 -#define MV64460_PCI_1_ACCESS_CONTROL_SIZE_5 0x1ed8 - -/****************************************/ -/* PCI Configuration Access Registers */ -/****************************************/ - -#define MV64460_PCI_0_CONFIG_ADDR 0xcf8 -#define MV64460_PCI_0_CONFIG_DATA_VIRTUAL_REG 0xcfc -#define MV64460_PCI_1_CONFIG_ADDR 0xc78 -#define MV64460_PCI_1_CONFIG_DATA_VIRTUAL_REG 0xc7c -#define MV64460_PCI_0_INTERRUPT_ACKNOWLEDGE_VIRTUAL_REG 0xc34 -#define MV64460_PCI_1_INTERRUPT_ACKNOWLEDGE_VIRTUAL_REG 0xcb4 - -/****************************************/ -/* PCI Error Report Registers */ -/****************************************/ - -#define MV64460_PCI_0_SERR_MASK 0xc28 -#define MV64460_PCI_1_SERR_MASK 0xca8 -#define MV64460_PCI_0_ERROR_ADDR_LOW 0x1d40 -#define MV64460_PCI_1_ERROR_ADDR_LOW 0x1dc0 -#define MV64460_PCI_0_ERROR_ADDR_HIGH 0x1d44 -#define MV64460_PCI_1_ERROR_ADDR_HIGH 0x1dc4 -#define MV64460_PCI_0_ERROR_ATTRIBUTE 0x1d48 -#define MV64460_PCI_1_ERROR_ATTRIBUTE 0x1dc8 -#define MV64460_PCI_0_ERROR_COMMAND 0x1d50 -#define MV64460_PCI_1_ERROR_COMMAND 0x1dd0 -#define MV64460_PCI_0_ERROR_CAUSE 0x1d58 -#define MV64460_PCI_1_ERROR_CAUSE 0x1dd8 -#define MV64460_PCI_0_ERROR_MASK 0x1d5c -#define MV64460_PCI_1_ERROR_MASK 0x1ddc - -/****************************************/ -/* PCI Debug Registers */ -/****************************************/ - -#define MV64460_PCI_0_MMASK 0X1D24 -#define MV64460_PCI_1_MMASK 0X1DA4 - -/*********************************************/ -/* PCI Configuration, Function 0, Registers */ -/*********************************************/ - -#define MV64460_PCI_DEVICE_AND_VENDOR_ID 0x000 -#define MV64460_PCI_STATUS_AND_COMMAND 0x004 -#define MV64460_PCI_CLASS_CODE_AND_REVISION_ID 0x008 -#define MV64460_PCI_BIST_HEADER_TYPE_LATENCY_TIMER_CACHE_LINE 0x00C - -#define MV64460_PCI_SCS_0_BASE_ADDR_LOW 0x010 -#define MV64460_PCI_SCS_0_BASE_ADDR_HIGH 0x014 -#define MV64460_PCI_SCS_1_BASE_ADDR_LOW 0x018 -#define MV64460_PCI_SCS_1_BASE_ADDR_HIGH 0x01C -#define MV64460_PCI_INTERNAL_REG_MEM_MAPPED_BASE_ADDR_LOW 0x020 -#define MV64460_PCI_INTERNAL_REG_MEM_MAPPED_BASE_ADDR_HIGH 0x024 -#define MV64460_PCI_SUBSYSTEM_ID_AND_SUBSYSTEM_VENDOR_ID 0x02c -#define MV64460_PCI_EXPANSION_ROM_BASE_ADDR_REG 0x030 -#define MV64460_PCI_CAPABILTY_LIST_POINTER 0x034 -#define MV64460_PCI_INTERRUPT_PIN_AND_LINE 0x03C - /* capability list */ -#define MV64460_PCI_POWER_MANAGEMENT_CAPABILITY 0x040 -#define MV64460_PCI_POWER_MANAGEMENT_STATUS_AND_CONTROL 0x044 -#define MV64460_PCI_VPD_ADDR 0x048 -#define MV64460_PCI_VPD_DATA 0x04c -#define MV64460_PCI_MSI_MESSAGE_CONTROL 0x050 -#define MV64460_PCI_MSI_MESSAGE_ADDR 0x054 -#define MV64460_PCI_MSI_MESSAGE_UPPER_ADDR 0x058 -#define MV64460_PCI_MSI_MESSAGE_DATA 0x05c -#define MV64460_PCI_X_COMMAND 0x060 -#define MV64460_PCI_X_STATUS 0x064 -#define MV64460_PCI_COMPACT_PCI_HOT_SWAP 0x068 - -/***********************************************/ -/* PCI Configuration, Function 1, Registers */ -/***********************************************/ - -#define MV64460_PCI_SCS_2_BASE_ADDR_LOW 0x110 -#define MV64460_PCI_SCS_2_BASE_ADDR_HIGH 0x114 -#define MV64460_PCI_SCS_3_BASE_ADDR_LOW 0x118 -#define MV64460_PCI_SCS_3_BASE_ADDR_HIGH 0x11c -#define MV64460_PCI_INTERNAL_SRAM_BASE_ADDR_LOW 0x120 -#define MV64460_PCI_INTERNAL_SRAM_BASE_ADDR_HIGH 0x124 - -/***********************************************/ -/* PCI Configuration, Function 2, Registers */ -/***********************************************/ - -#define MV64460_PCI_DEVCS_0_BASE_ADDR_LOW 0x210 -#define MV64460_PCI_DEVCS_0_BASE_ADDR_HIGH 0x214 -#define MV64460_PCI_DEVCS_1_BASE_ADDR_LOW 0x218 -#define MV64460_PCI_DEVCS_1_BASE_ADDR_HIGH 0x21c -#define MV64460_PCI_DEVCS_2_BASE_ADDR_LOW 0x220 -#define MV64460_PCI_DEVCS_2_BASE_ADDR_HIGH 0x224 - -/***********************************************/ -/* PCI Configuration, Function 3, Registers */ -/***********************************************/ - -#define MV64460_PCI_DEVCS_3_BASE_ADDR_LOW 0x310 -#define MV64460_PCI_DEVCS_3_BASE_ADDR_HIGH 0x314 -#define MV64460_PCI_BOOT_CS_BASE_ADDR_LOW 0x318 -#define MV64460_PCI_BOOT_CS_BASE_ADDR_HIGH 0x31c -#define MV64460_PCI_CPU_BASE_ADDR_LOW 0x220 -#define MV64460_PCI_CPU_BASE_ADDR_HIGH 0x224 - -/***********************************************/ -/* PCI Configuration, Function 4, Registers */ -/***********************************************/ - -#define MV64460_PCI_P2P_MEM0_BASE_ADDR_LOW 0x410 -#define MV64460_PCI_P2P_MEM0_BASE_ADDR_HIGH 0x414 -#define MV64460_PCI_P2P_MEM1_BASE_ADDR_LOW 0x418 -#define MV64460_PCI_P2P_MEM1_BASE_ADDR_HIGH 0x41c -#define MV64460_PCI_P2P_I_O_BASE_ADDR 0x420 -#define MV64460_PCI_INTERNAL_REGS_I_O_MAPPED_BASE_ADDR 0x424 - -/****************************************/ -/* Messaging Unit Registers (I20) */ -/****************************************/ - -#define MV64460_I2O_INBOUND_MESSAGE_REG0_PCI_0_SIDE 0x010 -#define MV64460_I2O_INBOUND_MESSAGE_REG1_PCI_0_SIDE 0x014 -#define MV64460_I2O_OUTBOUND_MESSAGE_REG0_PCI_0_SIDE 0x018 -#define MV64460_I2O_OUTBOUND_MESSAGE_REG1_PCI_0_SIDE 0x01C -#define MV64460_I2O_INBOUND_DOORBELL_REG_PCI_0_SIDE 0x020 -#define MV64460_I2O_INBOUND_INTERRUPT_CAUSE_REG_PCI_0_SIDE 0x024 -#define MV64460_I2O_INBOUND_INTERRUPT_MASK_REG_PCI_0_SIDE 0x028 -#define MV64460_I2O_OUTBOUND_DOORBELL_REG_PCI_0_SIDE 0x02C -#define MV64460_I2O_OUTBOUND_INTERRUPT_CAUSE_REG_PCI_0_SIDE 0x030 -#define MV64460_I2O_OUTBOUND_INTERRUPT_MASK_REG_PCI_0_SIDE 0x034 -#define MV64460_I2O_INBOUND_QUEUE_PORT_VIRTUAL_REG_PCI_0_SIDE 0x040 -#define MV64460_I2O_OUTBOUND_QUEUE_PORT_VIRTUAL_REG_PCI_0_SIDE 0x044 -#define MV64460_I2O_QUEUE_CONTROL_REG_PCI_0_SIDE 0x050 -#define MV64460_I2O_QUEUE_BASE_ADDR_REG_PCI_0_SIDE 0x054 -#define MV64460_I2O_INBOUND_FREE_HEAD_POINTER_REG_PCI_0_SIDE 0x060 -#define MV64460_I2O_INBOUND_FREE_TAIL_POINTER_REG_PCI_0_SIDE 0x064 -#define MV64460_I2O_INBOUND_POST_HEAD_POINTER_REG_PCI_0_SIDE 0x068 -#define MV64460_I2O_INBOUND_POST_TAIL_POINTER_REG_PCI_0_SIDE 0x06C -#define MV64460_I2O_OUTBOUND_FREE_HEAD_POINTER_REG_PCI_0_SIDE 0x070 -#define MV64460_I2O_OUTBOUND_FREE_TAIL_POINTER_REG_PCI_0_SIDE 0x074 -#define MV64460_I2O_OUTBOUND_POST_HEAD_POINTER_REG_PCI_0_SIDE 0x0F8 -#define MV64460_I2O_OUTBOUND_POST_TAIL_POINTER_REG_PCI_0_SIDE 0x0FC - -#define MV64460_I2O_INBOUND_MESSAGE_REG0_PCI_1_SIDE 0x090 -#define MV64460_I2O_INBOUND_MESSAGE_REG1_PCI_1_SIDE 0x094 -#define MV64460_I2O_OUTBOUND_MESSAGE_REG0_PCI_1_SIDE 0x098 -#define MV64460_I2O_OUTBOUND_MESSAGE_REG1_PCI_1_SIDE 0x09C -#define MV64460_I2O_INBOUND_DOORBELL_REG_PCI_1_SIDE 0x0A0 -#define MV64460_I2O_INBOUND_INTERRUPT_CAUSE_REG_PCI_1_SIDE 0x0A4 -#define MV64460_I2O_INBOUND_INTERRUPT_MASK_REG_PCI_1_SIDE 0x0A8 -#define MV64460_I2O_OUTBOUND_DOORBELL_REG_PCI_1_SIDE 0x0AC -#define MV64460_I2O_OUTBOUND_INTERRUPT_CAUSE_REG_PCI_1_SIDE 0x0B0 -#define MV64460_I2O_OUTBOUND_INTERRUPT_MASK_REG_PCI_1_SIDE 0x0B4 -#define MV64460_I2O_INBOUND_QUEUE_PORT_VIRTUAL_REG_PCI_1_SIDE 0x0C0 -#define MV64460_I2O_OUTBOUND_QUEUE_PORT_VIRTUAL_REG_PCI_1_SIDE 0x0C4 -#define MV64460_I2O_QUEUE_CONTROL_REG_PCI_1_SIDE 0x0D0 -#define MV64460_I2O_QUEUE_BASE_ADDR_REG_PCI_1_SIDE 0x0D4 -#define MV64460_I2O_INBOUND_FREE_HEAD_POINTER_REG_PCI_1_SIDE 0x0E0 -#define MV64460_I2O_INBOUND_FREE_TAIL_POINTER_REG_PCI_1_SIDE 0x0E4 -#define MV64460_I2O_INBOUND_POST_HEAD_POINTER_REG_PCI_1_SIDE 0x0E8 -#define MV64460_I2O_INBOUND_POST_TAIL_POINTER_REG_PCI_1_SIDE 0x0EC -#define MV64460_I2O_OUTBOUND_FREE_HEAD_POINTER_REG_PCI_1_SIDE 0x0F0 -#define MV64460_I2O_OUTBOUND_FREE_TAIL_POINTER_REG_PCI_1_SIDE 0x0F4 -#define MV64460_I2O_OUTBOUND_POST_HEAD_POINTER_REG_PCI_1_SIDE 0x078 -#define MV64460_I2O_OUTBOUND_POST_TAIL_POINTER_REG_PCI_1_SIDE 0x07C - -#define MV64460_I2O_INBOUND_MESSAGE_REG0_CPU0_SIDE 0x1C10 -#define MV64460_I2O_INBOUND_MESSAGE_REG1_CPU0_SIDE 0x1C14 -#define MV64460_I2O_OUTBOUND_MESSAGE_REG0_CPU0_SIDE 0x1C18 -#define MV64460_I2O_OUTBOUND_MESSAGE_REG1_CPU0_SIDE 0x1C1C -#define MV64460_I2O_INBOUND_DOORBELL_REG_CPU0_SIDE 0x1C20 -#define MV64460_I2O_INBOUND_INTERRUPT_CAUSE_REG_CPU0_SIDE 0x1C24 -#define MV64460_I2O_INBOUND_INTERRUPT_MASK_REG_CPU0_SIDE 0x1C28 -#define MV64460_I2O_OUTBOUND_DOORBELL_REG_CPU0_SIDE 0x1C2C -#define MV64460_I2O_OUTBOUND_INTERRUPT_CAUSE_REG_CPU0_SIDE 0x1C30 -#define MV64460_I2O_OUTBOUND_INTERRUPT_MASK_REG_CPU0_SIDE 0x1C34 -#define MV64460_I2O_INBOUND_QUEUE_PORT_VIRTUAL_REG_CPU0_SIDE 0x1C40 -#define MV64460_I2O_OUTBOUND_QUEUE_PORT_VIRTUAL_REG_CPU0_SIDE 0x1C44 -#define MV64460_I2O_QUEUE_CONTROL_REG_CPU0_SIDE 0x1C50 -#define MV64460_I2O_QUEUE_BASE_ADDR_REG_CPU0_SIDE 0x1C54 -#define MV64460_I2O_INBOUND_FREE_HEAD_POINTER_REG_CPU0_SIDE 0x1C60 -#define MV64460_I2O_INBOUND_FREE_TAIL_POINTER_REG_CPU0_SIDE 0x1C64 -#define MV64460_I2O_INBOUND_POST_HEAD_POINTER_REG_CPU0_SIDE 0x1C68 -#define MV64460_I2O_INBOUND_POST_TAIL_POINTER_REG_CPU0_SIDE 0x1C6C -#define MV64460_I2O_OUTBOUND_FREE_HEAD_POINTER_REG_CPU0_SIDE 0x1C70 -#define MV64460_I2O_OUTBOUND_FREE_TAIL_POINTER_REG_CPU0_SIDE 0x1C74 -#define MV64460_I2O_OUTBOUND_POST_HEAD_POINTER_REG_CPU0_SIDE 0x1CF8 -#define MV64460_I2O_OUTBOUND_POST_TAIL_POINTER_REG_CPU0_SIDE 0x1CFC -#define MV64460_I2O_INBOUND_MESSAGE_REG0_CPU1_SIDE 0x1C90 -#define MV64460_I2O_INBOUND_MESSAGE_REG1_CPU1_SIDE 0x1C94 -#define MV64460_I2O_OUTBOUND_MESSAGE_REG0_CPU1_SIDE 0x1C98 -#define MV64460_I2O_OUTBOUND_MESSAGE_REG1_CPU1_SIDE 0x1C9C -#define MV64460_I2O_INBOUND_DOORBELL_REG_CPU1_SIDE 0x1CA0 -#define MV64460_I2O_INBOUND_INTERRUPT_CAUSE_REG_CPU1_SIDE 0x1CA4 -#define MV64460_I2O_INBOUND_INTERRUPT_MASK_REG_CPU1_SIDE 0x1CA8 -#define MV64460_I2O_OUTBOUND_DOORBELL_REG_CPU1_SIDE 0x1CAC -#define MV64460_I2O_OUTBOUND_INTERRUPT_CAUSE_REG_CPU1_SIDE 0x1CB0 -#define MV64460_I2O_OUTBOUND_INTERRUPT_MASK_REG_CPU1_SIDE 0x1CB4 -#define MV64460_I2O_INBOUND_QUEUE_PORT_VIRTUAL_REG_CPU1_SIDE 0x1CC0 -#define MV64460_I2O_OUTBOUND_QUEUE_PORT_VIRTUAL_REG_CPU1_SIDE 0x1CC4 -#define MV64460_I2O_QUEUE_CONTROL_REG_CPU1_SIDE 0x1CD0 -#define MV64460_I2O_QUEUE_BASE_ADDR_REG_CPU1_SIDE 0x1CD4 -#define MV64460_I2O_INBOUND_FREE_HEAD_POINTER_REG_CPU1_SIDE 0x1CE0 -#define MV64460_I2O_INBOUND_FREE_TAIL_POINTER_REG_CPU1_SIDE 0x1CE4 -#define MV64460_I2O_INBOUND_POST_HEAD_POINTER_REG_CPU1_SIDE 0x1CE8 -#define MV64460_I2O_INBOUND_POST_TAIL_POINTER_REG_CPU1_SIDE 0x1CEC -#define MV64460_I2O_OUTBOUND_FREE_HEAD_POINTER_REG_CPU1_SIDE 0x1CF0 -#define MV64460_I2O_OUTBOUND_FREE_TAIL_POINTER_REG_CPU1_SIDE 0x1CF4 -#define MV64460_I2O_OUTBOUND_POST_HEAD_POINTER_REG_CPU1_SIDE 0x1C78 -#define MV64460_I2O_OUTBOUND_POST_TAIL_POINTER_REG_CPU1_SIDE 0x1C7C - -/****************************************/ -/* Ethernet Unit Registers */ -/****************************************/ - -#define MV64460_ETH_PHY_ADDR_REG 0x2000 -#define MV64460_ETH_SMI_REG 0x2004 -#define MV64460_ETH_UNIT_DEFAULT_ADDR_REG 0x2008 -#define MV64460_ETH_UNIT_DEFAULTID_REG 0x200c -#define MV64460_ETH_UNIT_INTERRUPT_CAUSE_REG 0x2080 -#define MV64460_ETH_UNIT_INTERRUPT_MASK_REG 0x2084 -#define MV64460_ETH_UNIT_INTERNAL_USE_REG 0x24fc -#define MV64460_ETH_UNIT_ERROR_ADDR_REG 0x2094 -#define MV64460_ETH_BAR_0 0x2200 -#define MV64460_ETH_BAR_1 0x2208 -#define MV64460_ETH_BAR_2 0x2210 -#define MV64460_ETH_BAR_3 0x2218 -#define MV64460_ETH_BAR_4 0x2220 -#define MV64460_ETH_BAR_5 0x2228 -#define MV64460_ETH_SIZE_REG_0 0x2204 -#define MV64460_ETH_SIZE_REG_1 0x220c -#define MV64460_ETH_SIZE_REG_2 0x2214 -#define MV64460_ETH_SIZE_REG_3 0x221c -#define MV64460_ETH_SIZE_REG_4 0x2224 -#define MV64460_ETH_SIZE_REG_5 0x222c -#define MV64460_ETH_HEADERS_RETARGET_BASE_REG 0x2230 -#define MV64460_ETH_HEADERS_RETARGET_CONTROL_REG 0x2234 -#define MV64460_ETH_HIGH_ADDR_REMAP_REG_0 0x2280 -#define MV64460_ETH_HIGH_ADDR_REMAP_REG_1 0x2284 -#define MV64460_ETH_HIGH_ADDR_REMAP_REG_2 0x2288 -#define MV64460_ETH_HIGH_ADDR_REMAP_REG_3 0x228c -#define MV64460_ETH_BASE_ADDR_ENABLE_REG 0x2290 -#define MV64460_ETH_ACCESS_PROTECTION_REG(port) (0x2294 + (port<<2)) -#define MV64460_ETH_MIB_COUNTERS_BASE(port) (0x3000 + (port<<7)) -#define MV64460_ETH_PORT_CONFIG_REG(port) (0x2400 + (port<<10)) -#define MV64460_ETH_PORT_CONFIG_EXTEND_REG(port) (0x2404 + (port<<10)) -#define MV64460_ETH_MII_SERIAL_PARAMETRS_REG(port) (0x2408 + (port<<10)) -#define MV64460_ETH_GMII_SERIAL_PARAMETRS_REG(port) (0x240c + (port<<10)) -#define MV64460_ETH_VLAN_ETHERTYPE_REG(port) (0x2410 + (port<<10)) -#define MV64460_ETH_MAC_ADDR_LOW(port) (0x2414 + (port<<10)) -#define MV64460_ETH_MAC_ADDR_HIGH(port) (0x2418 + (port<<10)) -#define MV64460_ETH_SDMA_CONFIG_REG(port) (0x241c + (port<<10)) -#define MV64460_ETH_DSCP_0(port) (0x2420 + (port<<10)) -#define MV64460_ETH_DSCP_1(port) (0x2424 + (port<<10)) -#define MV64460_ETH_DSCP_2(port) (0x2428 + (port<<10)) -#define MV64460_ETH_DSCP_3(port) (0x242c + (port<<10)) -#define MV64460_ETH_DSCP_4(port) (0x2430 + (port<<10)) -#define MV64460_ETH_DSCP_5(port) (0x2434 + (port<<10)) -#define MV64460_ETH_DSCP_6(port) (0x2438 + (port<<10)) -#define MV64460_ETH_PORT_SERIAL_CONTROL_REG(port) (0x243c + (port<<10)) -#define MV64460_ETH_VLAN_PRIORITY_TAG_TO_PRIORITY(port) (0x2440 + (port<<10)) -#define MV64460_ETH_PORT_STATUS_REG(port) (0x2444 + (port<<10)) -#define MV64460_ETH_TRANSMIT_QUEUE_COMMAND_REG(port) (0x2448 + (port<<10)) -#define MV64460_ETH_TX_QUEUE_FIXED_PRIORITY(port) (0x244c + (port<<10)) -#define MV64460_ETH_PORT_TX_TOKEN_BUCKET_RATE_CONFIG(port) (0x2450 + (port<<10)) -#define MV64460_ETH_MAXIMUM_TRANSMIT_UNIT(port) (0x2458 + (port<<10)) -#define MV64460_ETH_PORT_MAXIMUM_TOKEN_BUCKET_SIZE(port) (0x245c + (port<<10)) -#define MV64460_ETH_INTERRUPT_CAUSE_REG(port) (0x2460 + (port<<10)) -#define MV64460_ETH_INTERRUPT_CAUSE_EXTEND_REG(port) (0x2464 + (port<<10)) -#define MV64460_ETH_INTERRUPT_MASK_REG(port) (0x2468 + (port<<10)) -#define MV64460_ETH_INTERRUPT_EXTEND_MASK_REG(port) (0x246c + (port<<10)) -#define MV64460_ETH_RX_FIFO_URGENT_THRESHOLD_REG(port) (0x2470 + (port<<10)) -#define MV64460_ETH_TX_FIFO_URGENT_THRESHOLD_REG(port) (0x2474 + (port<<10)) -#define MV64460_ETH_RX_MINIMAL_FRAME_SIZE_REG(port) (0x247c + (port<<10)) -#define MV64460_ETH_RX_DISCARDED_FRAMES_COUNTER(port) (0x2484 + (port<<10) -#define MV64460_ETH_PORT_DEBUG_0_REG(port) (0x248c + (port<<10)) -#define MV64460_ETH_PORT_DEBUG_1_REG(port) (0x2490 + (port<<10)) -#define MV64460_ETH_PORT_INTERNAL_ADDR_ERROR_REG(port) (0x2494 + (port<<10)) -#define MV64460_ETH_INTERNAL_USE_REG(port) (0x24fc + (port<<10)) -#define MV64460_ETH_RECEIVE_QUEUE_COMMAND_REG(port) (0x2680 + (port<<10)) -#define MV64460_ETH_CURRENT_SERVED_TX_DESC_PTR(port) (0x2684 + (port<<10)) -#define MV64460_ETH_RX_CURRENT_QUEUE_DESC_PTR_0(port) (0x260c + (port<<10)) -#define MV64460_ETH_RX_CURRENT_QUEUE_DESC_PTR_1(port) (0x261c + (port<<10)) -#define MV64460_ETH_RX_CURRENT_QUEUE_DESC_PTR_2(port) (0x262c + (port<<10)) -#define MV64460_ETH_RX_CURRENT_QUEUE_DESC_PTR_3(port) (0x263c + (port<<10)) -#define MV64460_ETH_RX_CURRENT_QUEUE_DESC_PTR_4(port) (0x264c + (port<<10)) -#define MV64460_ETH_RX_CURRENT_QUEUE_DESC_PTR_5(port) (0x265c + (port<<10)) -#define MV64460_ETH_RX_CURRENT_QUEUE_DESC_PTR_6(port) (0x266c + (port<<10)) -#define MV64460_ETH_RX_CURRENT_QUEUE_DESC_PTR_7(port) (0x267c + (port<<10)) -#define MV64460_ETH_TX_CURRENT_QUEUE_DESC_PTR_0(port) (0x26c0 + (port<<10)) -#define MV64460_ETH_TX_CURRENT_QUEUE_DESC_PTR_1(port) (0x26c4 + (port<<10)) -#define MV64460_ETH_TX_CURRENT_QUEUE_DESC_PTR_2(port) (0x26c8 + (port<<10)) -#define MV64460_ETH_TX_CURRENT_QUEUE_DESC_PTR_3(port) (0x26cc + (port<<10)) -#define MV64460_ETH_TX_CURRENT_QUEUE_DESC_PTR_4(port) (0x26d0 + (port<<10)) -#define MV64460_ETH_TX_CURRENT_QUEUE_DESC_PTR_5(port) (0x26d4 + (port<<10)) -#define MV64460_ETH_TX_CURRENT_QUEUE_DESC_PTR_6(port) (0x26d8 + (port<<10)) -#define MV64460_ETH_TX_CURRENT_QUEUE_DESC_PTR_7(port) (0x26dc + (port<<10)) -#define MV64460_ETH_TX_QUEUE_0_TOKEN_BUCKET_COUNT(port) (0x2700 + (port<<10)) -#define MV64460_ETH_TX_QUEUE_1_TOKEN_BUCKET_COUNT(port) (0x2710 + (port<<10)) -#define MV64460_ETH_TX_QUEUE_2_TOKEN_BUCKET_COUNT(port) (0x2720 + (port<<10)) -#define MV64460_ETH_TX_QUEUE_3_TOKEN_BUCKET_COUNT(port) (0x2730 + (port<<10)) -#define MV64460_ETH_TX_QUEUE_4_TOKEN_BUCKET_COUNT(port) (0x2740 + (port<<10)) -#define MV64460_ETH_TX_QUEUE_5_TOKEN_BUCKET_COUNT(port) (0x2750 + (port<<10)) -#define MV64460_ETH_TX_QUEUE_6_TOKEN_BUCKET_COUNT(port) (0x2760 + (port<<10)) -#define MV64460_ETH_TX_QUEUE_7_TOKEN_BUCKET_COUNT(port) (0x2770 + (port<<10)) -#define MV64460_ETH_TX_QUEUE_0_TOKEN_BUCKET_CONFIG(port) (0x2704 + (port<<10)) -#define MV64460_ETH_TX_QUEUE_1_TOKEN_BUCKET_CONFIG(port) (0x2714 + (port<<10)) -#define MV64460_ETH_TX_QUEUE_2_TOKEN_BUCKET_CONFIG(port) (0x2724 + (port<<10)) -#define MV64460_ETH_TX_QUEUE_3_TOKEN_BUCKET_CONFIG(port) (0x2734 + (port<<10)) -#define MV64460_ETH_TX_QUEUE_4_TOKEN_BUCKET_CONFIG(port) (0x2744 + (port<<10)) -#define MV64460_ETH_TX_QUEUE_5_TOKEN_BUCKET_CONFIG(port) (0x2754 + (port<<10)) -#define MV64460_ETH_TX_QUEUE_6_TOKEN_BUCKET_CONFIG(port) (0x2764 + (port<<10)) -#define MV64460_ETH_TX_QUEUE_7_TOKEN_BUCKET_CONFIG(port) (0x2774 + (port<<10)) -#define MV64460_ETH_TX_QUEUE_0_ARBITER_CONFIG(port) (0x2708 + (port<<10)) -#define MV64460_ETH_TX_QUEUE_1_ARBITER_CONFIG(port) (0x2718 + (port<<10)) -#define MV64460_ETH_TX_QUEUE_2_ARBITER_CONFIG(port) (0x2728 + (port<<10)) -#define MV64460_ETH_TX_QUEUE_3_ARBITER_CONFIG(port) (0x2738 + (port<<10)) -#define MV64460_ETH_TX_QUEUE_4_ARBITER_CONFIG(port) (0x2748 + (port<<10)) -#define MV64460_ETH_TX_QUEUE_5_ARBITER_CONFIG(port) (0x2758 + (port<<10)) -#define MV64460_ETH_TX_QUEUE_6_ARBITER_CONFIG(port) (0x2768 + (port<<10)) -#define MV64460_ETH_TX_QUEUE_7_ARBITER_CONFIG(port) (0x2778 + (port<<10)) -#define MV64460_ETH_PORT_TX_TOKEN_BUCKET_COUNT(port) (0x2780 + (port<<10)) -#define MV64460_ETH_DA_FILTER_SPECIAL_MULTICAST_TABLE_BASE(port) (0x3400 + (port<<10)) -#define MV64460_ETH_DA_FILTER_OTHER_MULTICAST_TABLE_BASE(port) (0x3500 + (port<<10)) -#define MV64460_ETH_DA_FILTER_UNICAST_TABLE_BASE(port) (0x3600 + (port<<10)) - -/*******************************************/ -/* CUNIT Registers */ -/*******************************************/ - - /* Address Decoding Register Map */ - -#define MV64460_CUNIT_BASE_ADDR_REG0 0xf200 -#define MV64460_CUNIT_BASE_ADDR_REG1 0xf208 -#define MV64460_CUNIT_BASE_ADDR_REG2 0xf210 -#define MV64460_CUNIT_BASE_ADDR_REG3 0xf218 -#define MV64460_CUNIT_SIZE0 0xf204 -#define MV64460_CUNIT_SIZE1 0xf20c -#define MV64460_CUNIT_SIZE2 0xf214 -#define MV64460_CUNIT_SIZE3 0xf21c -#define MV64460_CUNIT_HIGH_ADDR_REMAP_REG0 0xf240 -#define MV64460_CUNIT_HIGH_ADDR_REMAP_REG1 0xf244 -#define MV64460_CUNIT_BASE_ADDR_ENABLE_REG 0xf250 -#define MV64460_MPSC0_ACCESS_PROTECTION_REG 0xf254 -#define MV64460_MPSC1_ACCESS_PROTECTION_REG 0xf258 -#define MV64460_CUNIT_INTERNAL_SPACE_BASE_ADDR_REG 0xf25C - - /* Error Report Registers */ - -#define MV64460_CUNIT_INTERRUPT_CAUSE_REG 0xf310 -#define MV64460_CUNIT_INTERRUPT_MASK_REG 0xf314 -#define MV64460_CUNIT_ERROR_ADDR 0xf318 - - /* Cunit Control Registers */ - -#define MV64460_CUNIT_ARBITER_CONTROL_REG 0xf300 -#define MV64460_CUNIT_CONFIG_REG 0xb40c -#define MV64460_CUNIT_CRROSBAR_TIMEOUT_REG 0xf304 - - /* Cunit Debug Registers */ - -#define MV64460_CUNIT_DEBUG_LOW 0xf340 -#define MV64460_CUNIT_DEBUG_HIGH 0xf344 -#define MV64460_CUNIT_MMASK 0xf380 - - /* Cunit Base Address Enable Window Bits*/ -#define MV64460_CUNIT_BASE_ADDR_WIN_0_BIT 0x0 -#define MV64460_CUNIT_BASE_ADDR_WIN_1_BIT 0x1 -#define MV64460_CUNIT_BASE_ADDR_WIN_2_BIT 0x2 -#define MV64460_CUNIT_BASE_ADDR_WIN_3_BIT 0x3 - - /* MPSCs Clocks Routing Registers */ - -#define MV64460_MPSC_ROUTING_REG 0xb400 -#define MV64460_MPSC_RX_CLOCK_ROUTING_REG 0xb404 -#define MV64460_MPSC_TX_CLOCK_ROUTING_REG 0xb408 - - /* MPSCs Interrupts Registers */ - -#define MV64460_MPSC_CAUSE_REG(port) (0xb804 + (port<<3)) -#define MV64460_MPSC_MASK_REG(port) (0xb884 + (port<<3)) - -#define MV64460_MPSC_MAIN_CONFIG_LOW(port) (0x8000 + (port<<12)) -#define MV64460_MPSC_MAIN_CONFIG_HIGH(port) (0x8004 + (port<<12)) -#define MV64460_MPSC_PROTOCOL_CONFIG(port) (0x8008 + (port<<12)) -#define MV64460_MPSC_CHANNEL_REG1(port) (0x800c + (port<<12)) -#define MV64460_MPSC_CHANNEL_REG2(port) (0x8010 + (port<<12)) -#define MV64460_MPSC_CHANNEL_REG3(port) (0x8014 + (port<<12)) -#define MV64460_MPSC_CHANNEL_REG4(port) (0x8018 + (port<<12)) -#define MV64460_MPSC_CHANNEL_REG5(port) (0x801c + (port<<12)) -#define MV64460_MPSC_CHANNEL_REG6(port) (0x8020 + (port<<12)) -#define MV64460_MPSC_CHANNEL_REG7(port) (0x8024 + (port<<12)) -#define MV64460_MPSC_CHANNEL_REG8(port) (0x8028 + (port<<12)) -#define MV64460_MPSC_CHANNEL_REG9(port) (0x802c + (port<<12)) -#define MV64460_MPSC_CHANNEL_REG10(port) (0x8030 + (port<<12)) - - /* MPSC0 Registers */ - - -/***************************************/ -/* SDMA Registers */ -/***************************************/ - -#define MV64460_SDMA_CONFIG_REG(channel) (0x4000 + (channel<<13)) -#define MV64460_SDMA_COMMAND_REG(channel) (0x4008 + (channel<<13)) -#define MV64460_SDMA_CURRENT_RX_DESCRIPTOR_POINTER(channel) (0x4810 + (channel<<13)) -#define MV64460_SDMA_CURRENT_TX_DESCRIPTOR_POINTER(channel) (0x4c10 + (channel<<13)) -#define MV64460_SDMA_FIRST_TX_DESCRIPTOR_POINTER(channel) (0x4c14 + (channel<<13)) - -#define MV64460_SDMA_CAUSE_REG 0xb800 -#define MV64460_SDMA_MASK_REG 0xb880 - - -/****************************************/ -/* SDMA Address Space Targets */ -/****************************************/ - -#define MV64460_SDMA_DRAM_CS_0_TARGET 0x0e00 -#define MV64460_SDMA_DRAM_CS_1_TARGET 0x0d00 -#define MV64460_SDMA_DRAM_CS_2_TARGET 0x0b00 -#define MV64460_SDMA_DRAM_CS_3_TARGET 0x0700 - -#define MV64460_SDMA_DEV_CS_0_TARGET 0x1e01 -#define MV64460_SDMA_DEV_CS_1_TARGET 0x1d01 -#define MV64460_SDMA_DEV_CS_2_TARGET 0x1b01 -#define MV64460_SDMA_DEV_CS_3_TARGET 0x1701 - -#define MV64460_SDMA_BOOT_CS_TARGET 0x0f00 - -#define MV64460_SDMA_SRAM_TARGET 0x0003 -#define MV64460_SDMA_60X_BUS_TARGET 0x4003 - -#define MV64460_PCI_0_TARGET 0x0003 -#define MV64460_PCI_1_TARGET 0x0004 - - -/* Devices BAR and size registers */ - -#define MV64460_DEV_CS0_BASE_ADDR 0x028 -#define MV64460_DEV_CS0_SIZE 0x030 -#define MV64460_DEV_CS1_BASE_ADDR 0x228 -#define MV64460_DEV_CS1_SIZE 0x230 -#define MV64460_DEV_CS2_BASE_ADDR 0x248 -#define MV64460_DEV_CS2_SIZE 0x250 -#define MV64460_DEV_CS3_BASE_ADDR 0x038 -#define MV64460_DEV_CS3_SIZE 0x040 -#define MV64460_BOOTCS_BASE_ADDR 0x238 -#define MV64460_BOOTCS_SIZE 0x240 - -/* SDMA Window access protection */ -#define MV64460_SDMA_WIN_ACCESS_NOT_ALLOWED 0 -#define MV64460_SDMA_WIN_ACCESS_READ_ONLY 1 -#define MV64460_SDMA_WIN_ACCESS_FULL 2 - -/* BRG Interrupts */ - -#define MV64460_BRG_CONFIG_REG(brg) (0xb200 + (brg<<3)) -#define MV64460_BRG_BAUDE_TUNING_REG(brg) (0xb204 + (brg<<3)) -#define MV64460_BRG_CAUSE_REG 0xb834 -#define MV64460_BRG_MASK_REG 0xb8b4 - -/****************************************/ -/* DMA Channel Control */ -/****************************************/ - -#define MV64460_DMA_CHANNEL0_CONTROL 0x840 -#define MV64460_DMA_CHANNEL0_CONTROL_HIGH 0x880 -#define MV64460_DMA_CHANNEL1_CONTROL 0x844 -#define MV64460_DMA_CHANNEL1_CONTROL_HIGH 0x884 -#define MV64460_DMA_CHANNEL2_CONTROL 0x848 -#define MV64460_DMA_CHANNEL2_CONTROL_HIGH 0x888 -#define MV64460_DMA_CHANNEL3_CONTROL 0x84C -#define MV64460_DMA_CHANNEL3_CONTROL_HIGH 0x88C - - -/****************************************/ -/* IDMA Registers */ -/****************************************/ - -#define MV64460_DMA_CHANNEL0_BYTE_COUNT 0x800 -#define MV64460_DMA_CHANNEL1_BYTE_COUNT 0x804 -#define MV64460_DMA_CHANNEL2_BYTE_COUNT 0x808 -#define MV64460_DMA_CHANNEL3_BYTE_COUNT 0x80C -#define MV64460_DMA_CHANNEL0_SOURCE_ADDR 0x810 -#define MV64460_DMA_CHANNEL1_SOURCE_ADDR 0x814 -#define MV64460_DMA_CHANNEL2_SOURCE_ADDR 0x818 -#define MV64460_DMA_CHANNEL3_SOURCE_ADDR 0x81c -#define MV64460_DMA_CHANNEL0_DESTINATION_ADDR 0x820 -#define MV64460_DMA_CHANNEL1_DESTINATION_ADDR 0x824 -#define MV64460_DMA_CHANNEL2_DESTINATION_ADDR 0x828 -#define MV64460_DMA_CHANNEL3_DESTINATION_ADDR 0x82C -#define MV64460_DMA_CHANNEL0_NEXT_DESCRIPTOR_POINTER 0x830 -#define MV64460_DMA_CHANNEL1_NEXT_DESCRIPTOR_POINTER 0x834 -#define MV64460_DMA_CHANNEL2_NEXT_DESCRIPTOR_POINTER 0x838 -#define MV64460_DMA_CHANNEL3_NEXT_DESCRIPTOR_POINTER 0x83C -#define MV64460_DMA_CHANNEL0_CURRENT_DESCRIPTOR_POINTER 0x870 -#define MV64460_DMA_CHANNEL1_CURRENT_DESCRIPTOR_POINTER 0x874 -#define MV64460_DMA_CHANNEL2_CURRENT_DESCRIPTOR_POINTER 0x878 -#define MV64460_DMA_CHANNEL3_CURRENT_DESCRIPTOR_POINTER 0x87C - - /* IDMA Address Decoding Base Address Registers */ - -#define MV64460_DMA_BASE_ADDR_REG0 0xa00 -#define MV64460_DMA_BASE_ADDR_REG1 0xa08 -#define MV64460_DMA_BASE_ADDR_REG2 0xa10 -#define MV64460_DMA_BASE_ADDR_REG3 0xa18 -#define MV64460_DMA_BASE_ADDR_REG4 0xa20 -#define MV64460_DMA_BASE_ADDR_REG5 0xa28 -#define MV64460_DMA_BASE_ADDR_REG6 0xa30 -#define MV64460_DMA_BASE_ADDR_REG7 0xa38 - - /* IDMA Address Decoding Size Address Register */ - -#define MV64460_DMA_SIZE_REG0 0xa04 -#define MV64460_DMA_SIZE_REG1 0xa0c -#define MV64460_DMA_SIZE_REG2 0xa14 -#define MV64460_DMA_SIZE_REG3 0xa1c -#define MV64460_DMA_SIZE_REG4 0xa24 -#define MV64460_DMA_SIZE_REG5 0xa2c -#define MV64460_DMA_SIZE_REG6 0xa34 -#define MV64460_DMA_SIZE_REG7 0xa3C - - /* IDMA Address Decoding High Address Remap and Access - Protection Registers */ - -#define MV64460_DMA_HIGH_ADDR_REMAP_REG0 0xa60 -#define MV64460_DMA_HIGH_ADDR_REMAP_REG1 0xa64 -#define MV64460_DMA_HIGH_ADDR_REMAP_REG2 0xa68 -#define MV64460_DMA_HIGH_ADDR_REMAP_REG3 0xa6C -#define MV64460_DMA_BASE_ADDR_ENABLE_REG 0xa80 -#define MV64460_DMA_CHANNEL0_ACCESS_PROTECTION_REG 0xa70 -#define MV64460_DMA_CHANNEL1_ACCESS_PROTECTION_REG 0xa74 -#define MV64460_DMA_CHANNEL2_ACCESS_PROTECTION_REG 0xa78 -#define MV64460_DMA_CHANNEL3_ACCESS_PROTECTION_REG 0xa7c -#define MV64460_DMA_ARBITER_CONTROL 0x860 -#define MV64460_DMA_CROSS_BAR_TIMEOUT 0x8d0 - - /* IDMA Headers Retarget Registers */ - -#define MV64460_DMA_HEADERS_RETARGET_CONTROL 0xa84 -#define MV64460_DMA_HEADERS_RETARGET_BASE 0xa88 - - /* IDMA Interrupt Register */ - -#define MV64460_DMA_INTERRUPT_CAUSE_REG 0x8c0 -#define MV64460_DMA_INTERRUPT_CAUSE_MASK 0x8c4 -#define MV64460_DMA_ERROR_ADDR 0x8c8 -#define MV64460_DMA_ERROR_SELECT 0x8cc - - /* IDMA Debug Register ( for internal use ) */ - -#define MV64460_DMA_DEBUG_LOW 0x8e0 -#define MV64460_DMA_DEBUG_HIGH 0x8e4 -#define MV64460_DMA_SPARE 0xA8C - -/****************************************/ -/* Timer_Counter */ -/****************************************/ - -#define MV64460_TIMER_COUNTER0 0x850 -#define MV64460_TIMER_COUNTER1 0x854 -#define MV64460_TIMER_COUNTER2 0x858 -#define MV64460_TIMER_COUNTER3 0x85C -#define MV64460_TIMER_COUNTER_0_3_CONTROL 0x864 -#define MV64460_TIMER_COUNTER_0_3_INTERRUPT_CAUSE 0x868 -#define MV64460_TIMER_COUNTER_0_3_INTERRUPT_MASK 0x86c - -/****************************************/ -/* Watchdog registers */ -/****************************************/ - -#define MV64460_WATCHDOG_CONFIG_REG 0xb410 -#define MV64460_WATCHDOG_VALUE_REG 0xb414 - -/****************************************/ -/* I2C Registers */ -/****************************************/ - -#define MV64460_I2C_SLAVE_ADDR 0xc000 -#define MV64460_I2C_EXTENDED_SLAVE_ADDR 0xc010 -#define MV64460_I2C_DATA 0xc004 -#define MV64460_I2C_CONTROL 0xc008 -#define MV64460_I2C_STATUS_BAUDE_RATE 0xc00C -#define MV64460_I2C_SOFT_RESET 0xc01c - -/****************************************/ -/* GPP Interface Registers */ -/****************************************/ - -#define MV64460_GPP_IO_CONTROL 0xf100 -#define MV64460_GPP_LEVEL_CONTROL 0xf110 -#define MV64460_GPP_VALUE 0xf104 -#define MV64460_GPP_INTERRUPT_CAUSE 0xf108 -#define MV64460_GPP_INTERRUPT_MASK0 0xf10c -#define MV64460_GPP_INTERRUPT_MASK1 0xf114 -#define MV64460_GPP_VALUE_SET 0xf118 -#define MV64460_GPP_VALUE_CLEAR 0xf11c - -/****************************************/ -/* Interrupt Controller Registers */ -/****************************************/ - -/****************************************/ -/* Interrupts */ -/****************************************/ - -#define MV64460_MAIN_INTERRUPT_CAUSE_LOW 0x004 -#define MV64460_MAIN_INTERRUPT_CAUSE_HIGH 0x00c -#define MV64460_CPU_INTERRUPT0_MASK_LOW 0x014 -#define MV64460_CPU_INTERRUPT0_MASK_HIGH 0x01c -#define MV64460_CPU_INTERRUPT0_SELECT_CAUSE 0x024 -#define MV64460_CPU_INTERRUPT1_MASK_LOW 0x034 -#define MV64460_CPU_INTERRUPT1_MASK_HIGH 0x03c -#define MV64460_CPU_INTERRUPT1_SELECT_CAUSE 0x044 -#define MV64460_INTERRUPT0_MASK_0_LOW 0x054 -#define MV64460_INTERRUPT0_MASK_0_HIGH 0x05c -#define MV64460_INTERRUPT0_SELECT_CAUSE 0x064 -#define MV64460_INTERRUPT1_MASK_0_LOW 0x074 -#define MV64460_INTERRUPT1_MASK_0_HIGH 0x07c -#define MV64460_INTERRUPT1_SELECT_CAUSE 0x084 - -/****************************************/ -/* MPP Interface Registers */ -/****************************************/ - -#define MV64460_MPP_CONTROL0 0xf000 -#define MV64460_MPP_CONTROL1 0xf004 -#define MV64460_MPP_CONTROL2 0xf008 -#define MV64460_MPP_CONTROL3 0xf00c - -/****************************************/ -/* Serial Initialization registers */ -/****************************************/ - -#define MV64460_SERIAL_INIT_LAST_DATA 0xf324 -#define MV64460_SERIAL_INIT_CONTROL 0xf328 -#define MV64460_SERIAL_INIT_STATUS 0xf32c - - -#endif /* __INCgt64460rh */ diff --git a/board/prodrive/p3mx/p3mx.c b/board/prodrive/p3mx/p3mx.c deleted file mode 100644 index 28c4ebad97..0000000000 --- a/board/prodrive/p3mx/p3mx.c +++ /dev/null @@ -1,838 +0,0 @@ -/* - * (C) Copyright 2006 - * Stefan Roese, DENX Software Engineering, sr@denx.de. - * - * Based on original work by - * Roel Loeffen, (C) Copyright 2006 Prodrive B.V. - * Josh Huber, (C) Copyright 2001 Mission Critical Linux, Inc. - * - * SPDX-License-Identifier: GPL-2.0+ - * - * modifications for the DB64360 eval board based by Ingo.Assmus@keymile.com - * modifications for the cpci750 by reinhard.arlt@esd-electronics.com - * modifications for the P3M750 by roel.loeffen@prodrive.nl - */ - -/* - * p3m750.c - main board support/init for the Prodrive p3m750/p3m7448. - */ - -#include <common.h> -#include <74xx_7xx.h> -#include "../../Marvell/include/memory.h" -#include "../../Marvell/include/pci.h" -#include "../../Marvell/include/mv_gen_reg.h" -#include <net.h> -#include <i2c.h> - -#include "eth.h" -#include "mpsc.h" -#include "64460.h" -#include "mv_regs.h" -#include "p3mx.h" - -DECLARE_GLOBAL_DATA_PTR; - -#undef DEBUG -/*#define DEBUG */ - -#ifdef CONFIG_PCI -#define MAP_PCI -#endif /* of CONFIG_PCI */ - -#ifdef DEBUG -#define DP(x) x -#else -#define DP(x) -#endif - -extern flash_info_t flash_info[]; - -/* ------------------------------------------------------------------------- */ - -/* this is the current GT register space location */ -/* it starts at CONFIG_SYS_DFL_GT_REGS but moves later to CONFIG_SYS_GT_REGS */ - -/* Unfortunately, we cant change it while we are in flash, so we initialize it - * to the "final" value. This means that any debug_led calls before - * board_early_init_f wont work right (like in cpu_init_f). - * See also my_remap_gt_regs below. (NTL) - */ - -void board_prebootm_init (void); -unsigned int INTERNAL_REG_BASE_ADDR = CONFIG_SYS_GT_REGS; -int display_mem_map (void); -void set_led(int); - -/* ------------------------------------------------------------------------- */ - -/* - * This is a version of the GT register space remapping function that - * doesn't touch globals (meaning, it's ok to run from flash.) - * - * Unfortunately, this has the side effect that a writable - * INTERNAL_REG_BASE_ADDR is impossible. Oh well. - */ - -void my_remap_gt_regs (u32 cur_loc, u32 new_loc) -{ - u32 temp; - - /* check and see if it's already moved */ - temp = in_le32 ((u32 *) (new_loc + INTERNAL_SPACE_DECODE)); - if ((temp & 0xffff) == new_loc >> 16) - return; - - temp = (in_le32 ((u32 *) (cur_loc + INTERNAL_SPACE_DECODE)) & - 0xffff0000) | (new_loc >> 16); - - out_le32 ((u32 *) (cur_loc + INTERNAL_SPACE_DECODE), temp); - - while (GTREGREAD (INTERNAL_SPACE_DECODE) != temp); -} - -#ifdef CONFIG_PCI - -static void gt_pci_config (void) -{ - unsigned int stat; - unsigned int val = 0x00fff864; /* DINK32: BusNum 23:16, DevNum 15:11, */ - /* FuncNum 10:8, RegNum 7:2 */ - - /* - * In PCIX mode devices provide their own bus and device numbers. - * We query the Discovery II's - * config registers by writing ones to the bus and device. - * We then update the Virtual register with the correct value for the - * bus and device. - */ - if ((GTREGREAD (PCI_0_MODE) & (BIT4 | BIT5)) != 0) { /* if PCI-X */ - GT_REG_WRITE (PCI_0_CONFIG_ADDR, BIT31 | val); - - GT_REG_READ (PCI_0_CONFIG_DATA_VIRTUAL_REG, &stat); - - GT_REG_WRITE (PCI_0_CONFIG_ADDR, BIT31 | val); - GT_REG_WRITE (PCI_0_CONFIG_DATA_VIRTUAL_REG, - (stat & 0xffff0000) | CONFIG_SYS_PCI_IDSEL); - - } - if ((GTREGREAD (PCI_1_MODE) & (BIT4 | BIT5)) != 0) { /* if PCI-X */ - GT_REG_WRITE (PCI_1_CONFIG_ADDR, BIT31 | val); - GT_REG_READ (PCI_1_CONFIG_DATA_VIRTUAL_REG, &stat); - - GT_REG_WRITE (PCI_1_CONFIG_ADDR, BIT31 | val); - GT_REG_WRITE (PCI_1_CONFIG_DATA_VIRTUAL_REG, - (stat & 0xffff0000) | CONFIG_SYS_PCI_IDSEL); - } - - /* Enable master */ - PCI_MASTER_ENABLE (0, SELF); - PCI_MASTER_ENABLE (1, SELF); - - /* Enable PCI0/1 Mem0 and IO 0 disable all others */ - GT_REG_READ (BASE_ADDR_ENABLE, &stat); - stat |= (1 << 11) | (1 << 12) | (1 << 13) | (1 << 16) | (1 << 17) | - (1 << 18); - stat &= ~((1 << 9) | (1 << 10) | (1 << 14) | (1 << 15)); - GT_REG_WRITE (BASE_ADDR_ENABLE, stat); - - /* ronen: - * add write to pci remap registers for 64460. - * in 64360 when writing to pci base go and overide remap automaticaly, - * in 64460 it doesn't - */ - GT_REG_WRITE (PCI_0_IO_BASE_ADDR, CONFIG_SYS_PCI0_IO_SPACE >> 16); - GT_REG_WRITE (PCI_0I_O_ADDRESS_REMAP, CONFIG_SYS_PCI0_IO_SPACE_PCI >> 16); - GT_REG_WRITE (PCI_0_IO_SIZE, (CONFIG_SYS_PCI0_IO_SIZE - 1) >> 16); - - GT_REG_WRITE (PCI_0_MEMORY0_BASE_ADDR, CONFIG_SYS_PCI0_MEM_BASE >> 16); - GT_REG_WRITE (PCI_0MEMORY0_ADDRESS_REMAP, CONFIG_SYS_PCI0_MEM_BASE >> 16); - GT_REG_WRITE (PCI_0_MEMORY0_SIZE, (CONFIG_SYS_PCI0_MEM_SIZE - 1) >> 16); - - GT_REG_WRITE (PCI_1_IO_BASE_ADDR, CONFIG_SYS_PCI1_IO_SPACE >> 16); - GT_REG_WRITE (PCI_1I_O_ADDRESS_REMAP, CONFIG_SYS_PCI1_IO_SPACE_PCI >> 16); - GT_REG_WRITE (PCI_1_IO_SIZE, (CONFIG_SYS_PCI1_IO_SIZE - 1) >> 16); - - GT_REG_WRITE (PCI_1_MEMORY0_BASE_ADDR, CONFIG_SYS_PCI1_MEM_BASE >> 16); - GT_REG_WRITE (PCI_1MEMORY0_ADDRESS_REMAP, CONFIG_SYS_PCI1_MEM_BASE >> 16); - GT_REG_WRITE (PCI_1_MEMORY0_SIZE, (CONFIG_SYS_PCI1_MEM_SIZE - 1) >> 16); - - /* PCI interface settings */ - /* Timeout set to retry forever */ - GT_REG_WRITE (PCI_0TIMEOUT_RETRY, 0x0); - GT_REG_WRITE (PCI_1TIMEOUT_RETRY, 0x0); - - /* ronen - enable only CS0 and Internal reg!! */ - GT_REG_WRITE (PCI_0BASE_ADDRESS_REGISTERS_ENABLE, 0xfffffdfe); - GT_REG_WRITE (PCI_1BASE_ADDRESS_REGISTERS_ENABLE, 0xfffffdfe); - - /* ronen: - * update the pci internal registers base address. - */ -#ifdef MAP_PCI - for (stat = 0; stat <= PCI_HOST1; stat++) - pciWriteConfigReg (stat, - PCI_INTERNAL_REGISTERS_MEMORY_MAPPED_BASE_ADDRESS, - SELF, CONFIG_SYS_GT_REGS); -#endif - -} -#endif - -/* Setup CPU interface paramaters */ -static void gt_cpu_config (void) -{ - cpu_t cpu = get_cpu_type (); - ulong tmp; - - /* cpu configuration register */ - tmp = GTREGREAD (CPU_CONFIGURATION); - /* set the SINGLE_CPU bit see MV64460 */ -#ifndef CONFIG_SYS_GT_DUAL_CPU /* SINGLE_CPU seems to cause JTAG problems */ - tmp |= CPU_CONF_SINGLE_CPU; -#endif - tmp &= ~CPU_CONF_AACK_DELAY_2; - tmp |= CPU_CONF_DP_VALID; - tmp |= CPU_CONF_AP_VALID; - tmp |= CPU_CONF_PIPELINE; - GT_REG_WRITE (CPU_CONFIGURATION, tmp); /* Marvell (VXWorks) writes 0x20220FF */ - - /* CPU master control register */ - tmp = GTREGREAD (CPU_MASTER_CONTROL); - tmp |= CPU_MAST_CTL_ARB_EN; - - if ((cpu == CPU_7400) || - (cpu == CPU_7410) || (cpu == CPU_7455) || (cpu == CPU_7450)) { - - tmp |= CPU_MAST_CTL_CLEAN_BLK; - tmp |= CPU_MAST_CTL_FLUSH_BLK; - - } else { - /* cleanblock must be cleared for CPUs - * that do not support this command (603e, 750) - * see Res#1 */ - tmp &= ~CPU_MAST_CTL_CLEAN_BLK; - tmp &= ~CPU_MAST_CTL_FLUSH_BLK; - } - GT_REG_WRITE (CPU_MASTER_CONTROL, tmp); -} - -/* - * board_early_init_f. - * - * set up gal. device mappings, etc. - */ -int board_early_init_f (void) -{ - /* set up the GT the way the kernel wants it - * the call to move the GT register space will obviously - * fail if it has already been done, but we're going to assume - * that if it's not at the power-on location, it's where we put - * it last time. (huber) - */ - my_remap_gt_regs (CONFIG_SYS_DFL_GT_REGS, CONFIG_SYS_GT_REGS); - -#ifdef CONFIG_PCI - gt_pci_config (); -#endif - /* mask all external interrupt sources */ - GT_REG_WRITE (CPU_INTERRUPT_MASK_REGISTER_LOW, 0); - GT_REG_WRITE (CPU_INTERRUPT_MASK_REGISTER_HIGH, 0); - /* new in >MV6436x */ - GT_REG_WRITE (CPU_INTERRUPT_1_MASK_REGISTER_LOW, 0); - GT_REG_WRITE (CPU_INTERRUPT_1_MASK_REGISTER_HIGH, 0); - /* --------------------- */ - GT_REG_WRITE (PCI_0INTERRUPT_CAUSE_MASK_REGISTER_LOW, 0); - GT_REG_WRITE (PCI_0INTERRUPT_CAUSE_MASK_REGISTER_HIGH, 0); - GT_REG_WRITE (PCI_1INTERRUPT_CAUSE_MASK_REGISTER_LOW, 0); - GT_REG_WRITE (PCI_1INTERRUPT_CAUSE_MASK_REGISTER_HIGH, 0); - - /* Device and Boot bus settings - */ - memoryMapDeviceSpace(DEVICE0, 0, 0); - GT_REG_WRITE(DEVICE_BANK0PARAMETERS, 0); - memoryMapDeviceSpace(DEVICE1, 0, 0); - GT_REG_WRITE(DEVICE_BANK1PARAMETERS, 0); - memoryMapDeviceSpace(DEVICE2, 0, 0); - GT_REG_WRITE(DEVICE_BANK2PARAMETERS, 0); - memoryMapDeviceSpace(DEVICE3, 0, 0); - GT_REG_WRITE(DEVICE_BANK3PARAMETERS, 0); - - GT_REG_WRITE(DEVICE_BOOT_BANK_PARAMETERS, CONFIG_SYS_BOOT_PAR); - - gt_cpu_config(); - - /* MPP setup */ - GT_REG_WRITE (MPP_CONTROL0, CONFIG_SYS_MPP_CONTROL_0); - GT_REG_WRITE (MPP_CONTROL1, CONFIG_SYS_MPP_CONTROL_1); - GT_REG_WRITE (MPP_CONTROL2, CONFIG_SYS_MPP_CONTROL_2); - GT_REG_WRITE (MPP_CONTROL3, CONFIG_SYS_MPP_CONTROL_3); - - GT_REG_WRITE (GPP_LEVEL_CONTROL, CONFIG_SYS_GPP_LEVEL_CONTROL); - - set_led(LED_RED); - - return 0; -} - -/* various things to do after relocation */ - -int misc_init_r () -{ - u8 val; - - icache_enable (); -#ifdef CONFIG_SYS_L2 - l2cache_enable (); -#endif -#ifdef CONFIG_MPSC - mpsc_sdma_init (); - mpsc_init2 (); -#endif - - /* - * Enable trickle changing in RTC upon powerup - * No diode, 250 ohm series resistor - */ - val = 0xa5; - i2c_write(CONFIG_SYS_I2C_RTC_ADDR, 8, 1, &val, 1); - - return 0; -} - -void after_reloc (ulong dest_addr, gd_t * gd) -{ - memoryMapDeviceSpace (BOOT_DEVICE, CONFIG_SYS_BOOT_SPACE, CONFIG_SYS_BOOT_SIZE); - -/* display_mem_map(); */ - - /* now, jump to the main U-Boot board init code */ - set_led(LED_GREEN); - board_init_r (gd, dest_addr); - /* NOTREACHED */ -} - -/* - * Check Board Identity: - * right now, assume borad type. (there is just one...after all) - */ - -int checkboard (void) -{ - char buf[64]; - int i = getenv_f("serial#", buf, sizeof(buf)); - - printf("Board: %s", CONFIG_SYS_BOARD_NAME); - - if (i > 0) { - puts(", serial# "); - puts(buf); - } - putc('\n'); - - return (0); -} - -void set_led(int col) -{ - int tmp; - int on_pin; - int off_pin; - - /* Program Mpp[22] as Gpp[22] - * Program Mpp[23] as Gpp[23] - */ - tmp = GTREGREAD(MPP_CONTROL2); - tmp &= 0x00ffffff; - GT_REG_WRITE(MPP_CONTROL2,tmp); - - /* Program Gpp[22] and Gpp[23] as output - */ - tmp = GTREGREAD(GPP_IO_CONTROL); - tmp |= 0x00C00000; - GT_REG_WRITE(GPP_IO_CONTROL, tmp); - - /* Program Gpp[22] and Gpp[23] as active high - */ - tmp = GTREGREAD(GPP_LEVEL_CONTROL); - tmp &= 0xff3fffff; - GT_REG_WRITE(GPP_LEVEL_CONTROL, tmp); - - switch(col) { - default: - case LED_OFF : - on_pin = 0; - off_pin = ((1 << 23) | (1 << 22)); - break; - case LED_RED : - on_pin = (1 << 23); - off_pin = (1 << 22); - break; - case LED_GREEN : - on_pin = (1 << 22); - off_pin = (1 << 23); - break; - case LED_ORANGE : - on_pin = ((1 << 23) | (1 << 22)); - off_pin = 0; - break; - } - - /* Set output Gpp[22] and Gpp[23] - */ - tmp = GTREGREAD(GPP_VALUE); - tmp |= on_pin; - tmp &= ~off_pin; - GT_REG_WRITE(GPP_VALUE, tmp); -} - -int display_mem_map (void) -{ - int i; - unsigned int base, size, width; -#ifdef CONFIG_PCI - int j; -#endif - - /* SDRAM */ - printf ("SD (DDR) RAM\n"); - for (i = 0; i <= BANK3; i++) { - base = memoryGetBankBaseAddress (i); - size = memoryGetBankSize (i); - if (size != 0) - printf ("BANK%d: base - 0x%08x\tsize - %dM bytes\n", - i, base, size >> 20); - } -#ifdef CONFIG_PCI - /* CPU's PCI windows */ - for (i = 0; i <= PCI_HOST1; i++) { - printf ("\nCPU's PCI %d windows\n", i); - base = pciGetSpaceBase (i, PCI_IO); - size = pciGetSpaceSize (i, PCI_IO); - printf (" IO: base - 0x%08x\tsize - %dM bytes\n", base, - size >> 20); - /* ronen currently only first PCI MEM is used 3 */ - for (j = 0; j <= PCI_REGION0; j++) { - base = pciGetSpaceBase (i, j); - size = pciGetSpaceSize (i, j); - printf ("MEMORY %d: base - 0x%08x\tsize - %dM bytes\n", - j, base, size >> 20); - } - } -#endif /* of CONFIG_PCI */ - - /* Bootrom */ - base = memoryGetDeviceBaseAddress (BOOT_DEVICE); /* Boot */ - size = memoryGetDeviceSize (BOOT_DEVICE); - width = memoryGetDeviceWidth (BOOT_DEVICE) * 8; - printf (" BOOT: base - 0x%08x size - %dM bytes\twidth - %d bits\t- FLASH\n", - base, size >> 20, width); - - return (0); -} - -/* DRAM check routines copied from gw8260 */ - -#if defined (CONFIG_SYS_DRAM_TEST) - -/*********************************************************************/ -/* NAME: move64() - moves a double word (64-bit) */ -/* */ -/* DESCRIPTION: */ -/* this function performs a double word move from the data at */ -/* the source pointer to the location at the destination pointer. */ -/* */ -/* INPUTS: */ -/* unsigned long long *src - pointer to data to move */ -/* */ -/* OUTPUTS: */ -/* unsigned long long *dest - pointer to locate to move data */ -/* */ -/* RETURNS: */ -/* None */ -/* */ -/* RESTRICTIONS/LIMITATIONS: */ -/* May cloober fr0. */ -/* */ -/*********************************************************************/ -static void move64 (unsigned long long *src, unsigned long long *dest) -{ - asm ("lfd 0, 0(3)\n\t" /* fpr0 = *scr */ - "stfd 0, 0(4)" /* *dest = fpr0 */ - : : : "fr0"); /* Clobbers fr0 */ - return; -} - - -#if defined (CONFIG_SYS_DRAM_TEST_DATA) - -unsigned long long pattern[] = { - 0xaaaaaaaaaaaaaaaaULL, - 0xccccccccccccccccULL, - 0xf0f0f0f0f0f0f0f0ULL, - 0xff00ff00ff00ff00ULL, - 0xffff0000ffff0000ULL, - 0xffffffff00000000ULL, - 0x00000000ffffffffULL, - 0x0000ffff0000ffffULL, - 0x00ff00ff00ff00ffULL, - 0x0f0f0f0f0f0f0f0fULL, - 0x3333333333333333ULL, - 0x5555555555555555ULL -}; - -/*********************************************************************/ -/* NAME: mem_test_data() - test data lines for shorts and opens */ -/* */ -/* DESCRIPTION: */ -/* Tests data lines for shorts and opens by forcing adjacent data */ -/* to opposite states. Because the data lines could be routed in */ -/* an arbitrary manner the must ensure test patterns ensure that */ -/* every case is tested. By using the following series of binary */ -/* patterns every combination of adjacent bits is test regardless */ -/* of routing. */ -/* */ -/* ...101010101010101010101010 */ -/* ...110011001100110011001100 */ -/* ...111100001111000011110000 */ -/* ...111111110000000011111111 */ -/* */ -/* Carrying this out, gives us six hex patterns as follows: */ -/* */ -/* 0xaaaaaaaaaaaaaaaa */ -/* 0xcccccccccccccccc */ -/* 0xf0f0f0f0f0f0f0f0 */ -/* 0xff00ff00ff00ff00 */ -/* 0xffff0000ffff0000 */ -/* 0xffffffff00000000 */ -/* */ -/* The number test patterns will always be given by: */ -/* */ -/* log(base 2)(number data bits) = log2 (64) = 6 */ -/* */ -/* To test for short and opens to other signals on our boards. we */ -/* simply */ -/* test with the 1's complemnt of the paterns as well. */ -/* */ -/* OUTPUTS: */ -/* Displays failing test pattern */ -/* */ -/* RETURNS: */ -/* 0 - Passed test */ -/* 1 - Failed test */ -/* */ -/* RESTRICTIONS/LIMITATIONS: */ -/* Assumes only one one SDRAM bank */ -/* */ -/*********************************************************************/ -int mem_test_data (void) -{ - unsigned long long *pmem = (unsigned long long *) CONFIG_SYS_MEMTEST_START; - unsigned long long temp64 = 0; - int num_patterns = sizeof (pattern) / sizeof (pattern[0]); - int i; - unsigned int hi, lo; - - for (i = 0; i < num_patterns; i++) { - move64 (&(pattern[i]), pmem); - move64 (pmem, &temp64); - - /* hi = (temp64>>32) & 0xffffffff; */ - /* lo = temp64 & 0xffffffff; */ - /* printf("\ntemp64 = 0x%08x%08x", hi, lo); */ - - hi = (pattern[i] >> 32) & 0xffffffff; - lo = pattern[i] & 0xffffffff; - /* printf("\npattern[%d] = 0x%08x%08x", i, hi, lo); */ - - if (temp64 != pattern[i]) { - printf ("\n Data Test Failed, pattern 0x%08x%08x", - hi, lo); - return 1; - } - } - - return 0; -} -#endif /* CONFIG_SYS_DRAM_TEST_DATA */ - -#if defined (CONFIG_SYS_DRAM_TEST_ADDRESS) -/*********************************************************************/ -/* NAME: mem_test_address() - test address lines */ -/* */ -/* DESCRIPTION: */ -/* This function performs a test to verify that each word im */ -/* memory is uniquly addressable. The test sequence is as follows: */ -/* */ -/* 1) write the address of each word to each word. */ -/* 2) verify that each location equals its address */ -/* */ -/* OUTPUTS: */ -/* Displays failing test pattern and address */ -/* */ -/* RETURNS: */ -/* 0 - Passed test */ -/* 1 - Failed test */ -/* */ -/* RESTRICTIONS/LIMITATIONS: */ -/* */ -/* */ -/*********************************************************************/ -int mem_test_address (void) -{ - volatile unsigned int *pmem = - (volatile unsigned int *) CONFIG_SYS_MEMTEST_START; - const unsigned int size = (CONFIG_SYS_MEMTEST_END - CONFIG_SYS_MEMTEST_START) / 4; - unsigned int i; - - /* write address to each location */ - for (i = 0; i < size; i++) - pmem[i] = i; - - /* verify each loaction */ - for (i = 0; i < size; i++) { - if (pmem[i] != i) { - printf ("\n Address Test Failed at 0x%x", i); - return 1; - } - } - return 0; -} -#endif /* CONFIG_SYS_DRAM_TEST_ADDRESS */ - -#if defined (CONFIG_SYS_DRAM_TEST_WALK) -/*********************************************************************/ -/* NAME: mem_march() - memory march */ -/* */ -/* DESCRIPTION: */ -/* Marches up through memory. At each location verifies rmask if */ -/* read = 1. At each location write wmask if write = 1. Displays */ -/* failing address and pattern. */ -/* */ -/* INPUTS: */ -/* volatile unsigned long long * base - start address of test */ -/* unsigned int size - number of dwords(64-bit) to test */ -/* unsigned long long rmask - read verify mask */ -/* unsigned long long wmask - wrtie verify mask */ -/* short read - verifies rmask if read = 1 */ -/* short write - writes wmask if write = 1 */ -/* */ -/* OUTPUTS: */ -/* Displays failing test pattern and address */ -/* */ -/* RETURNS: */ -/* 0 - Passed test */ -/* 1 - Failed test */ -/* */ -/* RESTRICTIONS/LIMITATIONS: */ -/* */ -/* */ -/*********************************************************************/ -int mem_march (volatile unsigned long long *base, - unsigned int size, - unsigned long long rmask, - unsigned long long wmask, short read, short write) -{ - unsigned int i; - unsigned long long temp = 0; - unsigned int hitemp, lotemp, himask, lomask; - - for (i = 0; i < size; i++) { - if (read != 0) { - /* temp = base[i]; */ - move64 ((unsigned long long *) &(base[i]), &temp); - if (rmask != temp) { - hitemp = (temp >> 32) & 0xffffffff; - lotemp = temp & 0xffffffff; - himask = (rmask >> 32) & 0xffffffff; - lomask = rmask & 0xffffffff; - - printf ("\n Walking one's test failed: address = 0x%08x," "\n\texpected 0x%08x%08x, found 0x%08x%08x", i << 3, himask, lomask, hitemp, lotemp); - return 1; - } - } - if (write != 0) { - /* base[i] = wmask; */ - move64 (&wmask, (unsigned long long *) &(base[i])); - } - } - return 0; -} -#endif /* CONFIG_SYS_DRAM_TEST_WALK */ - -/*********************************************************************/ -/* NAME: mem_test_walk() - a simple walking ones test */ -/* */ -/* DESCRIPTION: */ -/* Performs a walking ones through entire physical memory. The */ -/* test uses as series of memory marches, mem_march(), to verify */ -/* and write the test patterns to memory. The test sequence is as */ -/* follows: */ -/* 1) march writing 0000...0001 */ -/* 2) march verifying 0000...0001 , writing 0000...0010 */ -/* 3) repeat step 2 shifting masks left 1 bit each time unitl */ -/* the write mask equals 1000...0000 */ -/* 4) march verifying 1000...0000 */ -/* The test fails if any of the memory marches return a failure. */ -/* */ -/* OUTPUTS: */ -/* Displays which pass on the memory test is executing */ -/* */ -/* RETURNS: */ -/* 0 - Passed test */ -/* 1 - Failed test */ -/* */ -/* RESTRICTIONS/LIMITATIONS: */ -/* */ -/* */ -/*********************************************************************/ -int mem_test_walk (void) -{ - unsigned long long mask; - volatile unsigned long long *pmem = - (volatile unsigned long long *) CONFIG_SYS_MEMTEST_START; - const unsigned long size = (CONFIG_SYS_MEMTEST_END - CONFIG_SYS_MEMTEST_START) / 8; - - unsigned int i; - - mask = 0x01; - - printf ("Initial Pass"); - mem_march (pmem, size, 0x0, 0x1, 0, 1); - - printf ("\b\b\b\b\b\b\b\b\b\b\b\b"); - printf (" "); - printf (" "); - printf ("\b\b\b\b\b\b\b\b\b\b\b\b"); - - for (i = 0; i < 63; i++) { - printf ("Pass %2d", i + 2); - if (mem_march (pmem, size, mask, mask << 1, 1, 1) != 0) { - /*printf("mask: 0x%x, pass: %d, ", mask, i); */ - return 1; - } - mask = mask << 1; - printf ("\b\b\b\b\b\b\b"); - } - - printf ("Last Pass"); - if (mem_march (pmem, size, 0, mask, 0, 1) != 0) { - /* printf("mask: 0x%x", mask); */ - return 1; - } - printf ("\b\b\b\b\b\b\b\b\b"); - printf (" "); - printf ("\b\b\b\b\b\b\b\b\b"); - - return 0; -} - -/*********************************************************************/ -/* NAME: testdram() - calls any enabled memory tests */ -/* */ -/* DESCRIPTION: */ -/* Runs memory tests if the environment test variables are set to */ -/* 'y'. */ -/* */ -/* INPUTS: */ -/* testdramdata - If set to 'y', data test is run. */ -/* testdramaddress - If set to 'y', address test is run. */ -/* testdramwalk - If set to 'y', walking ones test is run */ -/* */ -/* OUTPUTS: */ -/* None */ -/* */ -/* RETURNS: */ -/* 0 - Passed test */ -/* 1 - Failed test */ -/* */ -/* RESTRICTIONS/LIMITATIONS: */ -/* */ -/* */ -/*********************************************************************/ -int testdram (void) -{ - int rundata = 0; - int runaddress = 0; - int runwalk = 0; - -#ifdef CONFIG_SYS_DRAM_TEST_DATA - rundata = getenv_yesno("testdramdata") == 1; -#endif -#ifdef CONFIG_SYS_DRAM_TEST_ADDRESS - runaddress = getenv_yesno("testdramaddress") == 1; -#endif -#ifdef CONFIG_SYS_DRAM_TEST_WALK - runwalk = getenv_yesno("testdramwalk") == 1; -#endif - - if ((rundata == 1) || (runaddress == 1) || (runwalk == 1)) - printf ("Testing RAM from 0x%08x to 0x%08x ... " - "(don't panic... that will take a moment !!!!)\n", - CONFIG_SYS_MEMTEST_START, CONFIG_SYS_MEMTEST_END); -#ifdef CONFIG_SYS_DRAM_TEST_DATA - if (rundata == 1) { - printf ("Test DATA ... "); - if (mem_test_data () == 1) { - printf ("failed \n"); - return 1; - } else - printf ("ok \n"); - } -#endif -#ifdef CONFIG_SYS_DRAM_TEST_ADDRESS - if (runaddress == 1) { - printf ("Test ADDRESS ... "); - if (mem_test_address () == 1) { - printf ("failed \n"); - return 1; - } else - printf ("ok \n"); - } -#endif -#ifdef CONFIG_SYS_DRAM_TEST_WALK - if (runwalk == 1) { - printf ("Test WALKING ONEs ... "); - if (mem_test_walk () == 1) { - printf ("failed \n"); - return 1; - } else - printf ("ok \n"); - } -#endif - if ((rundata == 1) || (runaddress == 1) || (runwalk == 1)) - printf ("passed\n"); - return 0; - -} -#endif /* CONFIG_SYS_DRAM_TEST */ - -/* ronen - the below functions are used by the bootm function */ -/* - we map the base register to fbe00000 (same mapping as in the LSP) */ -/* - we turn off the RX gig dmas - to prevent the dma from overunning */ -/* the kernel data areas. */ -/* - we diable and invalidate the icache and dcache. */ -void my_remap_gt_regs_bootm (u32 cur_loc, u32 new_loc) -{ - u32 temp; - - temp = in_le32 ((u32 *) (new_loc + INTERNAL_SPACE_DECODE)); - if ((temp & 0xffff) == new_loc >> 16) - return; - - temp = (in_le32 ((u32 *) (cur_loc + INTERNAL_SPACE_DECODE)) & - 0xffff0000) | (new_loc >> 16); - - out_le32 ((u32 *) (cur_loc + INTERNAL_SPACE_DECODE), temp); - - while ((WORD_SWAP (*((volatile unsigned int *) (NONE_CACHEABLE | - new_loc | - (INTERNAL_SPACE_DECODE))))) - != temp); - -} - -int board_eth_init(bd_t *bis) -{ - return mv6446x_eth_initialize(bis); -} diff --git a/board/prodrive/p3mx/p3mx.h b/board/prodrive/p3mx/p3mx.h deleted file mode 100644 index e6518cb592..0000000000 --- a/board/prodrive/p3mx/p3mx.h +++ /dev/null @@ -1,17 +0,0 @@ -/* - * (C) Copyright 2005 - * - * Roel Loeffen, (C) Copyright 2006 Prodrive B.V. roel.loeffen@prodrive.nl - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#ifndef __P3MX_H__ -#define __P3MX_H__ - -#define LED_OFF 1 -#define LED_GREEN 2 -#define LED_RED 3 -#define LED_ORANGE 4 - -#endif /* __P3MX_H__ */ diff --git a/board/prodrive/p3mx/pci.c b/board/prodrive/p3mx/pci.c deleted file mode 100644 index 56cdfc2959..0000000000 --- a/board/prodrive/p3mx/pci.c +++ /dev/null @@ -1,1003 +0,0 @@ -/* - * (C) Copyright 2000 - * Wolfgang Denk, DENX Software Engineering, wd@denx.de. - * - * SPDX-License-Identifier: GPL-2.0+ - */ -/* PCI.c - PCI functions */ - - -#include <common.h> -#ifdef CONFIG_PCI -#include <pci.h> - -#include "../../Marvell/include/pci.h" - -#undef DEBUG -#undef IDE_SET_NATIVE_MODE -static unsigned int local_buses[] = { 0, 0 }; - -static const unsigned char pci_irq_swizzle[2][PCI_MAX_DEVICES] = { - {0, 0, 0, 0, 0, 0, 0, 27, 27, [9 ... PCI_MAX_DEVICES - 1] = 0 }, - {0, 0, 0, 0, 0, 0, 0, 29, 29, [9 ... PCI_MAX_DEVICES - 1] = 0 }, -}; - -#ifdef CONFIG_USE_CPCIDVI -typedef struct { - unsigned int base; - unsigned int init; -} GT_CPCIDVI_ROM_T; - -static GT_CPCIDVI_ROM_T gt_cpcidvi_rom = {0, 0}; -#endif - -#ifdef DEBUG -static const unsigned int pci_bus_list[] = { PCI_0_MODE, PCI_1_MODE }; -static void gt_pci_bus_mode_display (PCI_HOST host) -{ - unsigned int mode; - - - mode = (GTREGREAD (pci_bus_list[host]) & (BIT4 | BIT5)) >> 4; - switch (mode) { - case 0: - printf ("PCI %d bus mode: Conventional PCI\n", host); - break; - case 1: - printf ("PCI %d bus mode: 66 MHz PCIX\n", host); - break; - case 2: - printf ("PCI %d bus mode: 100 MHz PCIX\n", host); - break; - case 3: - printf ("PCI %d bus mode: 133 MHz PCIX\n", host); - break; - default: - printf ("Unknown BUS %d\n", mode); - } -} -#endif - -static const unsigned int pci_p2p_configuration_reg[] = { - PCI_0P2P_CONFIGURATION, PCI_1P2P_CONFIGURATION -}; - -static const unsigned int pci_configuration_address[] = { - PCI_0CONFIGURATION_ADDRESS, PCI_1CONFIGURATION_ADDRESS -}; - -static const unsigned int pci_configuration_data[] = { - PCI_0CONFIGURATION_DATA_VIRTUAL_REGISTER, - PCI_1CONFIGURATION_DATA_VIRTUAL_REGISTER -}; - -static const unsigned int pci_error_cause_reg[] = { - PCI_0ERROR_CAUSE, PCI_1ERROR_CAUSE -}; - -static const unsigned int pci_arbiter_control[] = { - PCI_0ARBITER_CONTROL, PCI_1ARBITER_CONTROL -}; - -static const unsigned int pci_address_space_en[] = { - PCI_0_BASE_ADDR_REG_ENABLE, PCI_1_BASE_ADDR_REG_ENABLE -}; - -static const unsigned int pci_snoop_control_base_0_low[] = { - PCI_0SNOOP_CONTROL_BASE_0_LOW, PCI_1SNOOP_CONTROL_BASE_0_LOW -}; -static const unsigned int pci_snoop_control_top_0[] = { - PCI_0SNOOP_CONTROL_TOP_0, PCI_1SNOOP_CONTROL_TOP_0 -}; - -static const unsigned int pci_access_control_base_0_low[] = { - PCI_0ACCESS_CONTROL_BASE_0_LOW, PCI_1ACCESS_CONTROL_BASE_0_LOW -}; -static const unsigned int pci_access_control_top_0[] = { - PCI_0ACCESS_CONTROL_TOP_0, PCI_1ACCESS_CONTROL_TOP_0 -}; - -static const unsigned int pci_scs_bank_size[2][4] = { - {PCI_0SCS_0_BANK_SIZE, PCI_0SCS_1_BANK_SIZE, - PCI_0SCS_2_BANK_SIZE, PCI_0SCS_3_BANK_SIZE}, - {PCI_1SCS_0_BANK_SIZE, PCI_1SCS_1_BANK_SIZE, - PCI_1SCS_2_BANK_SIZE, PCI_1SCS_3_BANK_SIZE} -}; - -static const unsigned int pci_p2p_configuration[] = { - PCI_0P2P_CONFIGURATION, PCI_1P2P_CONFIGURATION -}; - - -/******************************************************************** -* pciWriteConfigReg - Write to a PCI configuration register -* - Make sure the GT is configured as a master before writing -* to another device on the PCI. -* - The function takes care of Big/Little endian conversion. -* -* -* Inputs: unsigned int regOffset: The register offset as it apears in the GT spec -* (or any other PCI device spec) -* pciDevNum: The device number needs to be addressed. -* -* Configuration Address 0xCF8: -* -* 31 30 24 23 16 15 11 10 8 7 2 0 <=bit Number -* |congif|Reserved| Bus |Device|Function|Register|00| -* |Enable| |Number|Number| Number | Number | | <=field Name -* -*********************************************************************/ -void pciWriteConfigReg (PCI_HOST host, unsigned int regOffset, - unsigned int pciDevNum, unsigned int data) -{ - volatile unsigned int DataForAddrReg; - unsigned int functionNum; - unsigned int busNum = 0; - unsigned int addr; - - if (pciDevNum > 32) /* illegal device Number */ - return; - if (pciDevNum == SELF) { /* configure our configuration space. */ - pciDevNum = - (GTREGREAD (pci_p2p_configuration_reg[host]) >> 24) & - 0x1f; - busNum = GTREGREAD (pci_p2p_configuration_reg[host]) & - 0xff0000; - } - functionNum = regOffset & 0x00000700; - pciDevNum = pciDevNum << 11; - regOffset = regOffset & 0xfc; - DataForAddrReg = - (regOffset | pciDevNum | functionNum | busNum) | BIT31; - GT_REG_WRITE (pci_configuration_address[host], DataForAddrReg); - GT_REG_READ (pci_configuration_address[host], &addr); - if (addr != DataForAddrReg) - return; - GT_REG_WRITE (pci_configuration_data[host], data); -} - -/******************************************************************** -* pciReadConfigReg - Read from a PCI0 configuration register -* - Make sure the GT is configured as a master before reading -* from another device on the PCI. -* - The function takes care of Big/Little endian conversion. -* INPUTS: regOffset: The register offset as it apears in the GT spec (or PCI -* spec) -* pciDevNum: The device number needs to be addressed. -* RETURNS: data , if the data == 0xffffffff check the master abort bit in the -* cause register to make sure the data is valid -* -* Configuration Address 0xCF8: -* -* 31 30 24 23 16 15 11 10 8 7 2 0 <=bit Number -* |congif|Reserved| Bus |Device|Function|Register|00| -* |Enable| |Number|Number| Number | Number | | <=field Name -* -*********************************************************************/ -unsigned int pciReadConfigReg (PCI_HOST host, unsigned int regOffset, - unsigned int pciDevNum) -{ - volatile unsigned int DataForAddrReg; - unsigned int data; - unsigned int functionNum; - unsigned int busNum = 0; - - if (pciDevNum > 32) /* illegal device Number */ - return 0xffffffff; - if (pciDevNum == SELF) { /* configure our configuration space. */ - pciDevNum = - (GTREGREAD (pci_p2p_configuration_reg[host]) >> 24) & - 0x1f; - busNum = GTREGREAD (pci_p2p_configuration_reg[host]) & - 0xff0000; - } - functionNum = regOffset & 0x00000700; - pciDevNum = pciDevNum << 11; - regOffset = regOffset & 0xfc; - DataForAddrReg = - (regOffset | pciDevNum | functionNum | busNum) | BIT31; - GT_REG_WRITE (pci_configuration_address[host], DataForAddrReg); - GT_REG_READ (pci_configuration_address[host], &data); - if (data != DataForAddrReg) - return 0xffffffff; - GT_REG_READ (pci_configuration_data[host], &data); - return data; -} - -/******************************************************************** -* pciOverBridgeWriteConfigReg - Write to a PCI configuration register where -* the agent is placed on another Bus. For more -* information read P2P in the PCI spec. -* -* Inputs: unsigned int regOffset - The register offset as it apears in the -* GT spec (or any other PCI device spec). -* unsigned int pciDevNum - The device number needs to be addressed. -* unsigned int busNum - On which bus does the Target agent connect -* to. -* unsigned int data - data to be written. -* -* Configuration Address 0xCF8: -* -* 31 30 24 23 16 15 11 10 8 7 2 0 <=bit Number -* |congif|Reserved| Bus |Device|Function|Register|01| -* |Enable| |Number|Number| Number | Number | | <=field Name -* -* The configuration Address is configure as type-I (bits[1:0] = '01') due to -* PCI spec referring to P2P. -* -*********************************************************************/ -void pciOverBridgeWriteConfigReg (PCI_HOST host, - unsigned int regOffset, - unsigned int pciDevNum, - unsigned int busNum, unsigned int data) -{ - unsigned int DataForReg; - unsigned int functionNum; - - functionNum = regOffset & 0x00000700; - pciDevNum = pciDevNum << 11; - regOffset = regOffset & 0xff; - busNum = busNum << 16; - if (pciDevNum == SELF) { /* This board */ - DataForReg = (regOffset | pciDevNum | functionNum) | BIT0; - } else { - DataForReg = (regOffset | pciDevNum | functionNum | busNum) | - BIT31 | BIT0; - } - GT_REG_WRITE (pci_configuration_address[host], DataForReg); - GT_REG_WRITE (pci_configuration_data[host], data); -} - - -/******************************************************************** -* pciOverBridgeReadConfigReg - Read from a PCIn configuration register where -* the agent target locate on another PCI bus. -* - Make sure the GT is configured as a master -* before reading from another device on the PCI. -* - The function takes care of Big/Little endian -* conversion. -* INPUTS: regOffset: The register offset as it apears in the GT spec (or PCI -* spec). (configuration register offset.) -* pciDevNum: The device number needs to be addressed. -* busNum: the Bus number where the agent is place. -* RETURNS: data , if the data == 0xffffffff check the master abort bit in the -* cause register to make sure the data is valid -* -* Configuration Address 0xCF8: -* -* 31 30 24 23 16 15 11 10 8 7 2 0 <=bit Number -* |congif|Reserved| Bus |Device|Function|Register|01| -* |Enable| |Number|Number| Number | Number | | <=field Name -* -*********************************************************************/ -unsigned int pciOverBridgeReadConfigReg (PCI_HOST host, - unsigned int regOffset, - unsigned int pciDevNum, - unsigned int busNum) -{ - unsigned int DataForReg; - unsigned int data; - unsigned int functionNum; - - functionNum = regOffset & 0x00000700; - pciDevNum = pciDevNum << 11; - regOffset = regOffset & 0xff; - busNum = busNum << 16; - if (pciDevNum == SELF) { /* This board */ - DataForReg = (regOffset | pciDevNum | functionNum) | BIT31; - } else { /* agent on another bus */ - - DataForReg = (regOffset | pciDevNum | functionNum | busNum) | - BIT0 | BIT31; - } - GT_REG_WRITE (pci_configuration_address[host], DataForReg); - GT_REG_READ (pci_configuration_data[host], &data); - return data; -} - - -/******************************************************************** -* pciGetRegOffset - Gets the register offset for this region config. -* -* INPUT: Bus, Region - The bus and region we ask for its base address. -* OUTPUT: N/A -* RETURNS: PCI register base address -*********************************************************************/ -static unsigned int pciGetRegOffset (PCI_HOST host, PCI_REGION region) -{ - switch (host) { - case PCI_HOST0: - switch (region) { - case PCI_IO: - return PCI_0I_O_LOW_DECODE_ADDRESS; - case PCI_REGION0: - return PCI_0MEMORY0_LOW_DECODE_ADDRESS; - case PCI_REGION1: - return PCI_0MEMORY1_LOW_DECODE_ADDRESS; - case PCI_REGION2: - return PCI_0MEMORY2_LOW_DECODE_ADDRESS; - case PCI_REGION3: - return PCI_0MEMORY3_LOW_DECODE_ADDRESS; - } - case PCI_HOST1: - switch (region) { - case PCI_IO: - return PCI_1I_O_LOW_DECODE_ADDRESS; - case PCI_REGION0: - return PCI_1MEMORY0_LOW_DECODE_ADDRESS; - case PCI_REGION1: - return PCI_1MEMORY1_LOW_DECODE_ADDRESS; - case PCI_REGION2: - return PCI_1MEMORY2_LOW_DECODE_ADDRESS; - case PCI_REGION3: - return PCI_1MEMORY3_LOW_DECODE_ADDRESS; - } - } - return PCI_0MEMORY0_LOW_DECODE_ADDRESS; -} - -static unsigned int pciGetRemapOffset (PCI_HOST host, PCI_REGION region) -{ - switch (host) { - case PCI_HOST0: - switch (region) { - case PCI_IO: - return PCI_0I_O_ADDRESS_REMAP; - case PCI_REGION0: - return PCI_0MEMORY0_ADDRESS_REMAP; - case PCI_REGION1: - return PCI_0MEMORY1_ADDRESS_REMAP; - case PCI_REGION2: - return PCI_0MEMORY2_ADDRESS_REMAP; - case PCI_REGION3: - return PCI_0MEMORY3_ADDRESS_REMAP; - } - case PCI_HOST1: - switch (region) { - case PCI_IO: - return PCI_1I_O_ADDRESS_REMAP; - case PCI_REGION0: - return PCI_1MEMORY0_ADDRESS_REMAP; - case PCI_REGION1: - return PCI_1MEMORY1_ADDRESS_REMAP; - case PCI_REGION2: - return PCI_1MEMORY2_ADDRESS_REMAP; - case PCI_REGION3: - return PCI_1MEMORY3_ADDRESS_REMAP; - } - } - return PCI_0MEMORY0_ADDRESS_REMAP; -} - -/******************************************************************** -* pciGetBaseAddress - Gets the base address of a PCI. -* - If the PCI size is 0 then this base address has no meaning!!! -* -* -* INPUT: Bus, Region - The bus and region we ask for its base address. -* OUTPUT: N/A -* RETURNS: PCI base address. -*********************************************************************/ -unsigned int pciGetBaseAddress (PCI_HOST host, PCI_REGION region) -{ - unsigned int regBase; - unsigned int regEnd; - unsigned int regOffset = pciGetRegOffset (host, region); - - GT_REG_READ (regOffset, ®Base); - GT_REG_READ (regOffset + 8, ®End); - - if (regEnd <= regBase) - return 0xffffffff; /* ERROR !!! */ - - regBase = regBase << 16; - return regBase; -} - -bool pciMapSpace (PCI_HOST host, PCI_REGION region, unsigned int remapBase, - unsigned int bankBase, unsigned int bankLength) -{ - unsigned int low = 0xfff; - unsigned int high = 0x0; - unsigned int regOffset = pciGetRegOffset (host, region); - unsigned int remapOffset = pciGetRemapOffset (host, region); - - if (bankLength != 0) { - low = (bankBase >> 16) & 0xffff; - high = ((bankBase + bankLength) >> 16) - 1; - } - - GT_REG_WRITE (regOffset, low | (1 << 24)); /* no swapping */ - GT_REG_WRITE (regOffset + 8, high); - - if (bankLength != 0) { /* must do AFTER writing maps */ - GT_REG_WRITE (remapOffset, remapBase >> 16); /* sorry, 32 bits only. - dont support upper 32 - in this driver */ - } - return true; -} - -unsigned int pciGetSpaceBase (PCI_HOST host, PCI_REGION region) -{ - unsigned int low; - unsigned int regOffset = pciGetRegOffset (host, region); - - GT_REG_READ (regOffset, &low); - return (low & 0xffff) << 16; -} - -unsigned int pciGetSpaceSize (PCI_HOST host, PCI_REGION region) -{ - unsigned int low, high; - unsigned int regOffset = pciGetRegOffset (host, region); - - GT_REG_READ (regOffset, &low); - GT_REG_READ (regOffset + 8, &high); - return ((high & 0xffff) + 1) << 16; -} - - -/* ronen - 7/Dec/03*/ -/******************************************************************** -* gtPciDisable/EnableInternalBAR - This function enable/disable PCI BARS. -* Inputs: one of the PCI BAR -*********************************************************************/ -void gtPciEnableInternalBAR (PCI_HOST host, PCI_INTERNAL_BAR pciBAR) -{ - RESET_REG_BITS (pci_address_space_en[host], BIT0 << pciBAR); -} - -void gtPciDisableInternalBAR (PCI_HOST host, PCI_INTERNAL_BAR pciBAR) -{ - SET_REG_BITS (pci_address_space_en[host], BIT0 << pciBAR); -} - -/******************************************************************** -* pciMapMemoryBank - Maps PCI_host memory bank "bank" for the slave. -* -* Inputs: base and size of PCI SCS -*********************************************************************/ -void pciMapMemoryBank (PCI_HOST host, MEMORY_BANK bank, - unsigned int pciDramBase, unsigned int pciDramSize) -{ - /*ronen different function for 3rd bank. */ - unsigned int offset = (bank < 2) ? bank * 8 : 0x100 + (bank - 2) * 8; - - pciDramBase = pciDramBase & 0xfffff000; - pciDramBase = pciDramBase | (pciReadConfigReg (host, - PCI_SCS_0_BASE_ADDRESS - + offset, - SELF) & 0x00000fff); - pciWriteConfigReg (host, PCI_SCS_0_BASE_ADDRESS + offset, SELF, - pciDramBase); - if (pciDramSize == 0) - pciDramSize++; - GT_REG_WRITE (pci_scs_bank_size[host][bank], pciDramSize - 1); - gtPciEnableInternalBAR (host, bank); -} - -/******************************************************************** -* pciSetRegionFeatures - This function modifys one of the 8 regions with -* feature bits given as an input. -* - Be advised to check the spec before modifying them. -* Inputs: PCI_PROTECT_REGION region - one of the eight regions. -* unsigned int features - See file: pci.h there are defintion for those -* region features. -* unsigned int baseAddress - The region base Address. -* unsigned int topAddress - The region top Address. -* Returns: false if one of the parameters is erroneous true otherwise. -*********************************************************************/ -bool pciSetRegionFeatures (PCI_HOST host, PCI_ACCESS_REGIONS region, - unsigned int features, unsigned int baseAddress, - unsigned int regionLength) -{ - unsigned int accessLow; - unsigned int accessHigh; - unsigned int accessTop = baseAddress + regionLength; - - if (regionLength == 0) { /* close the region. */ - pciDisableAccessRegion (host, region); - return true; - } - /* base Address is store is bits [11:0] */ - accessLow = (baseAddress & 0xfff00000) >> 20; - /* All the features are update according to the defines in pci.h (to be on - the safe side we disable bits: [11:0] */ - accessLow = accessLow | (features & 0xfffff000); - /* write to the Low Access Region register */ - GT_REG_WRITE (pci_access_control_base_0_low[host] + 0x10 * region, - accessLow); - - accessHigh = (accessTop & 0xfff00000) >> 20; - - /* write to the High Access Region register */ - GT_REG_WRITE (pci_access_control_top_0[host] + 0x10 * region, - accessHigh - 1); - return true; -} - -/******************************************************************** -* pciDisableAccessRegion - Disable The given Region by writing MAX size -* to its low Address and MIN size to its high Address. -* -* Inputs: PCI_ACCESS_REGIONS region - The region we to be Disabled. -* Returns: N/A. -*********************************************************************/ -void pciDisableAccessRegion (PCI_HOST host, PCI_ACCESS_REGIONS region) -{ - /* writing back the registers default values. */ - GT_REG_WRITE (pci_access_control_base_0_low[host] + 0x10 * region, - 0x01001fff); - GT_REG_WRITE (pci_access_control_top_0[host] + 0x10 * region, 0); -} - -/******************************************************************** -* pciArbiterEnable - Enables PCI-0`s Arbitration mechanism. -* -* Inputs: N/A -* Returns: true. -*********************************************************************/ -bool pciArbiterEnable (PCI_HOST host) -{ - unsigned int regData; - - GT_REG_READ (pci_arbiter_control[host], ®Data); - GT_REG_WRITE (pci_arbiter_control[host], regData | BIT31); - return true; -} - -/******************************************************************** -* pciArbiterDisable - Disable PCI-0`s Arbitration mechanism. -* -* Inputs: N/A -* Returns: true -*********************************************************************/ -bool pciArbiterDisable (PCI_HOST host) -{ - unsigned int regData; - - GT_REG_READ (pci_arbiter_control[host], ®Data); - GT_REG_WRITE (pci_arbiter_control[host], regData & 0x7fffffff); - return true; -} - -/******************************************************************** -* pciSetArbiterAgentsPriority - Priority setup for the PCI agents (Hi or Low) -* -* Inputs: PCI_AGENT_PRIO internalAgent - priotity for internal agent. -* PCI_AGENT_PRIO externalAgent0 - priotity for external#0 agent. -* PCI_AGENT_PRIO externalAgent1 - priotity for external#1 agent. -* PCI_AGENT_PRIO externalAgent2 - priotity for external#2 agent. -* PCI_AGENT_PRIO externalAgent3 - priotity for external#3 agent. -* PCI_AGENT_PRIO externalAgent4 - priotity for external#4 agent. -* PCI_AGENT_PRIO externalAgent5 - priotity for external#5 agent. -* Returns: true -*********************************************************************/ -bool pciSetArbiterAgentsPriority (PCI_HOST host, PCI_AGENT_PRIO internalAgent, - PCI_AGENT_PRIO externalAgent0, - PCI_AGENT_PRIO externalAgent1, - PCI_AGENT_PRIO externalAgent2, - PCI_AGENT_PRIO externalAgent3, - PCI_AGENT_PRIO externalAgent4, - PCI_AGENT_PRIO externalAgent5) -{ - unsigned int regData; - unsigned int writeData; - - GT_REG_READ (pci_arbiter_control[host], ®Data); - writeData = (internalAgent << 7) + (externalAgent0 << 8) + - (externalAgent1 << 9) + (externalAgent2 << 10) + - (externalAgent3 << 11) + (externalAgent4 << 12) + - (externalAgent5 << 13); - regData = (regData & 0xffffc07f) | writeData; - GT_REG_WRITE (pci_arbiter_control[host], regData & regData); - return true; -} - -/******************************************************************** -* pciParkingDisable - Park on last option disable, with this function you can -* disable the park on last mechanism for each agent. -* disabling this option for all agents results parking -* on the internal master. -* -* Inputs: PCI_AGENT_PARK internalAgent - parking Disable for internal agent. -* PCI_AGENT_PARK externalAgent0 - parking Disable for external#0 agent. -* PCI_AGENT_PARK externalAgent1 - parking Disable for external#1 agent. -* PCI_AGENT_PARK externalAgent2 - parking Disable for external#2 agent. -* PCI_AGENT_PARK externalAgent3 - parking Disable for external#3 agent. -* PCI_AGENT_PARK externalAgent4 - parking Disable for external#4 agent. -* PCI_AGENT_PARK externalAgent5 - parking Disable for external#5 agent. -* Returns: true -*********************************************************************/ -bool pciParkingDisable (PCI_HOST host, PCI_AGENT_PARK internalAgent, - PCI_AGENT_PARK externalAgent0, - PCI_AGENT_PARK externalAgent1, - PCI_AGENT_PARK externalAgent2, - PCI_AGENT_PARK externalAgent3, - PCI_AGENT_PARK externalAgent4, - PCI_AGENT_PARK externalAgent5) -{ - unsigned int regData; - unsigned int writeData; - - GT_REG_READ (pci_arbiter_control[host], ®Data); - writeData = (internalAgent << 14) + (externalAgent0 << 15) + - (externalAgent1 << 16) + (externalAgent2 << 17) + - (externalAgent3 << 18) + (externalAgent4 << 19) + - (externalAgent5 << 20); - regData = (regData & ~(0x7f << 14)) | writeData; - GT_REG_WRITE (pci_arbiter_control[host], regData); - return true; -} - -/******************************************************************** -* pciEnableBrokenAgentDetection - A master is said to be broken if it fails to -* respond to grant assertion within a window specified in -* the input value: 'brokenValue'. -* -* Inputs: unsigned char brokenValue - A value which limits the Master to hold the -* grant without asserting frame. -* Returns: Error for illegal broken value otherwise true. -*********************************************************************/ -bool pciEnableBrokenAgentDetection (PCI_HOST host, unsigned char brokenValue) -{ - unsigned int data; - unsigned int regData; - - if (brokenValue > 0xf) - return false; /* brokenValue must be 4 bit */ - data = brokenValue << 3; - GT_REG_READ (pci_arbiter_control[host], ®Data); - regData = (regData & 0xffffff87) | data; - GT_REG_WRITE (pci_arbiter_control[host], regData | BIT1); - return true; -} - -/******************************************************************** -* pciDisableBrokenAgentDetection - This function disable the Broken agent -* Detection mechanism. -* NOTE: This operation may cause a dead lock on the -* pci0 arbitration. -* -* Inputs: N/A -* Returns: true. -*********************************************************************/ -bool pciDisableBrokenAgentDetection (PCI_HOST host) -{ - unsigned int regData; - - GT_REG_READ (pci_arbiter_control[host], ®Data); - regData = regData & 0xfffffffd; - GT_REG_WRITE (pci_arbiter_control[host], regData); - return true; -} - -/******************************************************************** -* pciP2PConfig - This function set the PCI_n P2P configurate. -* For more information on the P2P read PCI spec. -* -* Inputs: unsigned int SecondBusLow - Secondery PCI interface Bus Range Lower -* Boundry. -* unsigned int SecondBusHigh - Secondry PCI interface Bus Range upper -* Boundry. -* unsigned int busNum - The CPI bus number to which the PCI interface -* is connected. -* unsigned int devNum - The PCI interface's device number. -* -* Returns: true. -*********************************************************************/ -bool pciP2PConfig (PCI_HOST host, unsigned int SecondBusLow, - unsigned int SecondBusHigh, - unsigned int busNum, unsigned int devNum) -{ - unsigned int regData; - - regData = (SecondBusLow & 0xff) | ((SecondBusHigh & 0xff) << 8) | - ((busNum & 0xff) << 16) | ((devNum & 0x1f) << 24); - GT_REG_WRITE (pci_p2p_configuration[host], regData); - return true; -} - -/******************************************************************** -* pciSetRegionSnoopMode - This function modifys one of the 4 regions which -* supports Cache Coherency in the PCI_n interface. -* Inputs: region - One of the four regions. -* snoopType - There is four optional Types: -* 1. No Snoop. -* 2. Snoop to WT region. -* 3. Snoop to WB region. -* 4. Snoop & Invalidate to WB region. -* baseAddress - Base Address of this region. -* regionLength - Region length. -* Returns: false if one of the parameters is wrong otherwise return true. -*********************************************************************/ -bool pciSetRegionSnoopMode (PCI_HOST host, PCI_SNOOP_REGION region, - PCI_SNOOP_TYPE snoopType, - unsigned int baseAddress, - unsigned int regionLength) -{ - unsigned int snoopXbaseAddress; - unsigned int snoopXtopAddress; - unsigned int data; - unsigned int snoopHigh = baseAddress + regionLength; - - if ((region > PCI_SNOOP_REGION3) || (snoopType > PCI_SNOOP_WB)) - return false; - snoopXbaseAddress = - pci_snoop_control_base_0_low[host] + 0x10 * region; - snoopXtopAddress = pci_snoop_control_top_0[host] + 0x10 * region; - if (regionLength == 0) { /* closing the region */ - GT_REG_WRITE (snoopXbaseAddress, 0x0000ffff); - GT_REG_WRITE (snoopXtopAddress, 0); - return true; - } - baseAddress = baseAddress & 0xfff00000; /* Granularity of 1MByte */ - data = (baseAddress >> 20) | snoopType << 12; - GT_REG_WRITE (snoopXbaseAddress, data); - snoopHigh = (snoopHigh & 0xfff00000) >> 20; - GT_REG_WRITE (snoopXtopAddress, snoopHigh - 1); - return true; -} - -static int gt_read_config_dword (struct pci_controller *hose, - pci_dev_t dev, int offset, u32 * value) -{ - int bus = PCI_BUS (dev); - - if ((bus == local_buses[0]) || (bus == local_buses[1])) { - *value = pciReadConfigReg ((PCI_HOST) hose->cfg_addr, offset, - PCI_DEV (dev)); - } else { - *value = pciOverBridgeReadConfigReg ((PCI_HOST) hose-> - cfg_addr, offset, - PCI_DEV (dev), bus); - } - - return 0; -} - -static int gt_write_config_dword (struct pci_controller *hose, - pci_dev_t dev, int offset, u32 value) -{ - int bus = PCI_BUS (dev); - - if ((bus == local_buses[0]) || (bus == local_buses[1])) { - pciWriteConfigReg ((PCI_HOST) hose->cfg_addr, offset, - PCI_DEV (dev), value); - } else { - pciOverBridgeWriteConfigReg ((PCI_HOST) hose->cfg_addr, - offset, PCI_DEV (dev), bus, - value); - } - return 0; -} - - -static void gt_setup_ide (struct pci_controller *hose, - pci_dev_t dev, struct pci_config_table *entry) -{ - static const int ide_bar[] = { 8, 4, 8, 4, 0, 0 }; - u32 bar_response, bar_value; - int bar; - - for (bar = 0; bar < 6; bar++) { - /*ronen different function for 3rd bank. */ - unsigned int offset = - (bar < 2) ? bar * 8 : 0x100 + (bar - 2) * 8; - - pci_hose_write_config_dword (hose, dev, PCI_BASE_ADDRESS_0 + offset, - 0x0); - pci_hose_read_config_dword (hose, dev, PCI_BASE_ADDRESS_0 + offset, - &bar_response); - - pciauto_region_allocate (bar_response & - PCI_BASE_ADDRESS_SPACE_IO ? hose-> - pci_io : hose->pci_mem, ide_bar[bar], - &bar_value); - - pci_hose_write_config_dword (hose, dev, PCI_BASE_ADDRESS_0 + bar * 4, - bar_value); - } -} - -#ifdef CONFIG_USE_CPCIDVI -static void gt_setup_cpcidvi (struct pci_controller *hose, - pci_dev_t dev, struct pci_config_table *entry) -{ - u32 bar_value, pci_response; - - pci_hose_read_config_dword (hose, dev, PCI_COMMAND, &pci_response); - pci_hose_write_config_dword (hose, dev, PCI_BASE_ADDRESS_0, 0xffffffff); - pci_hose_read_config_dword (hose, dev, PCI_BASE_ADDRESS_0, &pci_response); - pciauto_region_allocate (hose->pci_mem, 0x01000000, &bar_value); - pci_hose_write_config_dword (hose, dev, PCI_BASE_ADDRESS_0, (bar_value & 0xffffff00)); - pci_hose_write_config_dword (hose, dev, PCI_ROM_ADDRESS, 0x0); - pciauto_region_allocate (hose->pci_mem, 0x40000, &bar_value); - pci_hose_write_config_dword (hose, dev, PCI_ROM_ADDRESS, (bar_value & 0xffffff00) | 0x01); - gt_cpcidvi_rom.base = bar_value & 0xffffff00; - gt_cpcidvi_rom.init = 1; -} - -unsigned char gt_cpcidvi_in8(unsigned int offset) -{ - unsigned char data; - - if (gt_cpcidvi_rom.init == 0) { - return(0); - } - data = in8((offset & 0x04) + 0x3f000 + gt_cpcidvi_rom.base); - return(data); -} - -void gt_cpcidvi_out8(unsigned int offset, unsigned char data) -{ - unsigned int off; - - if (gt_cpcidvi_rom.init == 0) { - return; - } - off = data; - off = ((off << 3) & 0x7f8) + (offset & 0x4) + 0x3e000 + gt_cpcidvi_rom.base; - in8(off); - return; -} -#endif - -/* TODO BJW: Change this for DB64360. This was pulled from the EV64260 */ -/* and is curently not called *. */ -#if 0 -static void gt_fixup_irq (struct pci_controller *hose, pci_dev_t dev) -{ - unsigned char pin, irq; - - pci_read_config_byte (dev, PCI_INTERRUPT_PIN, &pin); - - if (pin == 1) { /* only allow INT A */ - irq = pci_irq_swizzle[(PCI_HOST) hose-> - cfg_addr][PCI_DEV (dev)]; - if (irq) - pci_write_config_byte (dev, PCI_INTERRUPT_LINE, irq); - } -} -#endif - -struct pci_config_table gt_config_table[] = { -#ifdef CONFIG_USE_CPCIDVI - {PCI_VENDOR_ID_CT, PCI_DEVICE_ID_CT_69030, PCI_CLASS_DISPLAY_VGA, - PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID, gt_setup_cpcidvi}, -#endif - {PCI_ANY_ID, PCI_ANY_ID, PCI_CLASS_STORAGE_IDE, - PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID, gt_setup_ide}, - {} -}; - -struct pci_controller pci0_hose = { -/* fixup_irq: gt_fixup_irq, */ - config_table:gt_config_table, -}; - -struct pci_controller pci1_hose = { -/* fixup_irq: gt_fixup_irq, */ - config_table:gt_config_table, -}; - -void pci_init_board (void) -{ - unsigned int command; -#ifdef CONFIG_PCI_PNP - unsigned int bar; -#endif -#ifdef DEBUG - gt_pci_bus_mode_display (PCI_HOST0); -#endif -#ifdef CONFIG_USE_CPCIDVI - gt_cpcidvi_rom.init = 0; - gt_cpcidvi_rom.base = 0; -#endif - - pci0_hose.config_table = gt_config_table; - pci1_hose.config_table = gt_config_table; - -#ifdef CONFIG_USE_CPCIDVI - gt_config_table[0].config_device = gt_setup_cpcidvi; -#endif - gt_config_table[1].config_device = gt_setup_ide; - - pci0_hose.first_busno = 0; - pci0_hose.last_busno = 0xff; - local_buses[0] = pci0_hose.first_busno; - - /* PCI memory space */ - pci_set_region (pci0_hose.regions + 0, - CONFIG_SYS_PCI0_0_MEM_SPACE, - CONFIG_SYS_PCI0_0_MEM_SPACE, - CONFIG_SYS_PCI0_MEM_SIZE, PCI_REGION_MEM); - - /* PCI I/O space */ - pci_set_region (pci0_hose.regions + 1, - CONFIG_SYS_PCI0_IO_SPACE_PCI, - CONFIG_SYS_PCI0_IO_SPACE, CONFIG_SYS_PCI0_IO_SIZE, PCI_REGION_IO); - - pci_set_ops (&pci0_hose, - pci_hose_read_config_byte_via_dword, - pci_hose_read_config_word_via_dword, - gt_read_config_dword, - pci_hose_write_config_byte_via_dword, - pci_hose_write_config_word_via_dword, - gt_write_config_dword); - pci0_hose.region_count = 2; - - pci0_hose.cfg_addr = (unsigned int *) PCI_HOST0; - - pci_register_hose (&pci0_hose); - pciArbiterDisable(PCI_HOST0); /* on PMC modules no arbiter is used */ - pciParkingDisable (PCI_HOST0, 1, 1, 1, 1, 1, 1, 1); - command = pciReadConfigReg (PCI_HOST0, PCI_COMMAND, SELF); - command |= PCI_COMMAND_MASTER; - pciWriteConfigReg (PCI_HOST0, PCI_COMMAND, SELF, command); - command = pciReadConfigReg (PCI_HOST0, PCI_COMMAND, SELF); - command |= PCI_COMMAND_MEMORY; - pciWriteConfigReg (PCI_HOST0, PCI_COMMAND, SELF, command); - -#ifdef CONFIG_PCI_PNP - pciauto_config_init(&pci0_hose); - pciauto_region_allocate(pci0_hose.pci_io, 0x400, &bar); -#endif -#ifdef CONFIG_PCI_SCAN_SHOW - printf("PCI: Bus Dev VenId DevId Class Int\n"); -#endif - pci0_hose.last_busno = pci_hose_scan_bus (&pci0_hose, pci0_hose.first_busno); - -#ifdef DEBUG - gt_pci_bus_mode_display (PCI_HOST1); -#endif - pci1_hose.first_busno = pci0_hose.last_busno + 1; - pci1_hose.last_busno = 0xff; - pci1_hose.current_busno = pci1_hose.first_busno; - local_buses[1] = pci1_hose.first_busno; - - /* PCI memory space */ - pci_set_region (pci1_hose.regions + 0, - CONFIG_SYS_PCI1_0_MEM_SPACE, - CONFIG_SYS_PCI1_0_MEM_SPACE, - CONFIG_SYS_PCI1_MEM_SIZE, PCI_REGION_MEM); - - /* PCI I/O space */ - pci_set_region (pci1_hose.regions + 1, - CONFIG_SYS_PCI1_IO_SPACE_PCI, - CONFIG_SYS_PCI1_IO_SPACE, CONFIG_SYS_PCI1_IO_SIZE, PCI_REGION_IO); - - pci_set_ops (&pci1_hose, - pci_hose_read_config_byte_via_dword, - pci_hose_read_config_word_via_dword, - gt_read_config_dword, - pci_hose_write_config_byte_via_dword, - pci_hose_write_config_word_via_dword, - gt_write_config_dword); - - pci1_hose.region_count = 2; - - pci1_hose.cfg_addr = (unsigned int *) PCI_HOST1; - - pci_register_hose (&pci1_hose); - - pciArbiterEnable (PCI_HOST1); - pciParkingDisable (PCI_HOST1, 1, 1, 1, 1, 1, 1, 1); - - command = pciReadConfigReg (PCI_HOST1, PCI_COMMAND, SELF); - command |= PCI_COMMAND_MASTER; - pciWriteConfigReg (PCI_HOST1, PCI_COMMAND, SELF, command); - -#ifdef CONFIG_PCI_PNP - pciauto_config_init(&pci1_hose); - pciauto_region_allocate(pci1_hose.pci_io, 0x400, &bar); -#endif - pci1_hose.last_busno = pci_hose_scan_bus (&pci1_hose, pci1_hose.first_busno); - - command = pciReadConfigReg (PCI_HOST1, PCI_COMMAND, SELF); - command |= PCI_COMMAND_MEMORY; - pciWriteConfigReg (PCI_HOST1, PCI_COMMAND, SELF, command); - -} -#endif /* of CONFIG_PCI */ diff --git a/board/prodrive/p3mx/sdram_init.c b/board/prodrive/p3mx/sdram_init.c deleted file mode 100644 index 4220930bc5..0000000000 --- a/board/prodrive/p3mx/sdram_init.c +++ /dev/null @@ -1,418 +0,0 @@ -/* - * (C) Copyright 2001 - * Josh Huber <huber@mclx.com>, Mission Critical Linux, Inc. - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -/************************************************************************* - * adaption for the Marvell DB64460 Board - * Ingo Assmus (ingo.assmus@keymile.com) - *************************************************************************/ - -/* sdram_init.c - automatic memory sizing */ - -#include <common.h> -#include <74xx_7xx.h> -#include "../../Marvell/include/memory.h" -#include "../../Marvell/include/pci.h" -#include "../../Marvell/include/mv_gen_reg.h" -#include <net.h> - -#include "eth.h" -#include "mpsc.h" -#include "../../Marvell/common/i2c.h" -#include "64460.h" -#include "mv_regs.h" - -DECLARE_GLOBAL_DATA_PTR; - -#undef DEBUG -#define MAP_PCI - -#ifdef DEBUG -#define DP(x) x -#else -#define DP(x) -#endif - -int set_dfcdlInit (void); /* setup delay line of Mv64460 */ -int mvDmaIsChannelActive (int); -int mvDmaSetMemorySpace (ulong, ulong, ulong, ulong, ulong); -int mvDmaTransfer (int, ulong, ulong, ulong, ulong); - -#define D_CACHE_FLUSH_LINE(addr, offset) \ - { \ - __asm__ __volatile__ ("dcbf %0,%1" : : "r" (addr), "r" (offset)); \ - } - -int memory_map_bank (unsigned int bankNo, - unsigned int bankBase, unsigned int bankLength) -{ -#if defined (MAP_PCI) && defined (CONFIG_PCI) - PCI_HOST host; -#endif - -#ifdef DEBUG - if (bankLength > 0) { - printf ("mapping bank %d at %08x - %08x\n", - bankNo, bankBase, bankBase + bankLength - 1); - } else { - printf ("unmapping bank %d\n", bankNo); - } -#endif - - memoryMapBank (bankNo, bankBase, bankLength); - -#if defined (MAP_PCI) && defined (CONFIG_PCI) - for (host = PCI_HOST0; host <= PCI_HOST1; host++) { - const int features = - PREFETCH_ENABLE | - DELAYED_READ_ENABLE | - AGGRESSIVE_PREFETCH | - READ_LINE_AGGRESSIVE_PREFETCH | - READ_MULTI_AGGRESSIVE_PREFETCH | - MAX_BURST_4 | PCI_NO_SWAP; - - pciMapMemoryBank (host, bankNo, bankBase, bankLength); - - pciSetRegionSnoopMode (host, bankNo, PCI_SNOOP_WB, bankBase, - bankLength); - - pciSetRegionFeatures (host, bankNo, features, bankBase, - bankLength); - } -#endif - - return 0; -} - -/* - * Check memory range for valid RAM. A simple memory test determines - * the actually available RAM size between addresses `base' and - * `base + maxsize'. Some (not all) hardware errors are detected: - * - short between address lines - * - short between data lines - */ -long int dram_size (long int *base, long int maxsize) -{ - volatile long int *addr, *b = base; - long int cnt, val, save1, save2; - -#define STARTVAL (1<<20) /* start test at 1M */ - for (cnt = STARTVAL / sizeof (long); cnt < maxsize / sizeof (long); - cnt <<= 1) { - addr = base + cnt; /* pointer arith! */ - - save1 = *addr; /* save contents of addr */ - save2 = *b; /* save contents of base */ - - *addr = cnt; /* write cnt to addr */ - *b = 0; /* put null at base */ - - /* check at base address */ - if ((*b) != 0) { - *addr = save1; /* restore *addr */ - *b = save2; /* restore *b */ - return (0); - } - val = *addr; /* read *addr */ - val = *addr; /* read *addr */ - - *addr = save1; - *b = save2; - - if (val != cnt) { - DP (printf - ("Found %08x at Address %08x (failure)\n", - (unsigned int) val, (unsigned int) addr)); - /* fix boundary condition.. STARTVAL means zero */ - if (cnt == STARTVAL / sizeof (long)) - cnt = 0; - return (cnt * sizeof (long)); - } - } - - return maxsize; -} - -#define SDRAM_NORMAL 0x0 -#define SDRAM_PRECHARGE_ALL 0x1 -#define SDRAM_REFRESH_ALL 0x2 -#define SDRAM_MODE_REG_SETUP 0x3 -#define SDRAM_XTEN_MODE_REG_SETUP 0x4 -#define SDRAM_NOP 0x5 -#define SDRAM_SELF_REFRESH 0x7 - -phys_size_t initdram (int board_type) -{ - int tmp; - int start; - ulong size; - ulong memSpaceAttr; - ulong dest; - - /* first disable all banks */ - memory_map_bank(0, 0, 0); - memory_map_bank(1, 0, 0); - memory_map_bank(2, 0, 0); - memory_map_bank(3, 0, 0); - - /* calibrate delay lines */ - set_dfcdlInit(); - - GT_REG_WRITE(MV64460_SDRAM_OPERATION, SDRAM_NOP); /* 0x1418 */ - do { - tmp = GTREGREAD(MV64460_SDRAM_OPERATION); - } while(tmp != 0x0); - - /* SDRAM controller configuration */ -#ifdef CONFIG_MV64460_ECC - GT_REG_WRITE(MV64460_SDRAM_CONFIG, 0x58201400); /* 0x1400 */ -#else - GT_REG_WRITE(MV64460_SDRAM_CONFIG, 0x58200400); /* 0x1400 */ -#endif - GT_REG_WRITE(MV64460_D_UNIT_CONTROL_LOW, 0xC3000540); /* 0x1404 */ - GT_REG_WRITE(MV64460_D_UNIT_CONTROL_HIGH, 0x0300F777); /* 0x1424 */ - GT_REG_WRITE(MV64460_SDRAM_TIMING_CONTROL_LOW, 0x01712220); /* 0x1408 */ - GT_REG_WRITE(MV64460_SDRAM_TIMING_CONTROL_HIGH, 0x0000005D); /* 0x140C */ - GT_REG_WRITE(MV64460_SDRAM_ADDR_CONTROL, 0x00000012); /* 0x1410 */ - GT_REG_WRITE(MV64460_SDRAM_OPEN_PAGES_CONTROL, 0x00000001); /* 0x1414 */ - - /* SDRAM drive strength */ - GT_REG_WRITE(MV64460_SDRAM_ADDR_CTRL_PADS_CALIBRATION, 0x80000000); /* 0x14C0 */ - GT_REG_WRITE(MV64460_SDRAM_ADDR_CTRL_PADS_CALIBRATION, 0x80000008); /* 0x14C0 */ - GT_REG_WRITE(MV64460_SDRAM_DATA_PADS_CALIBRATION, 0x80000000); /* 0x14C4 */ - GT_REG_WRITE(MV64460_SDRAM_DATA_PADS_CALIBRATION, 0x80000008); /* 0x14C4 */ - - /* setup SDRAM device registers */ - - /* precharge all */ - GT_REG_WRITE(MV64460_SDRAM_OPERATION, SDRAM_PRECHARGE_ALL); /* 0x1418 */ - do { - tmp = GTREGREAD(MV64460_SDRAM_OPERATION); - } while(tmp != 0x0); - - /* enable DLL */ - GT_REG_WRITE(MV64460_EXTENDED_DRAM_MODE, 0x00000000); /* 0x1420 */ - GT_REG_WRITE(MV64460_SDRAM_OPERATION, SDRAM_XTEN_MODE_REG_SETUP); /* 0x1418 */ - do { - tmp = GTREGREAD(MV64460_SDRAM_OPERATION); - } while(tmp != 0x0); - - /* reset DLL */ - GT_REG_WRITE(MV64460_SDRAM_MODE, 0x00000132); /* 0x141C */ - GT_REG_WRITE(MV64460_SDRAM_OPERATION, SDRAM_MODE_REG_SETUP); /* 0x1418 */ - do { - tmp = GTREGREAD(MV64460_SDRAM_OPERATION); - } while(tmp != 0x0); - - /* precharge all */ - GT_REG_WRITE(MV64460_SDRAM_OPERATION, SDRAM_PRECHARGE_ALL); /* 0x1418 */ - do { - tmp = GTREGREAD(MV64460_SDRAM_OPERATION); - } while(tmp != 0x0); - - /* wait for 2 auto refresh commands */ - udelay(20); - - /* un-reset DLL */ - GT_REG_WRITE(MV64460_SDRAM_MODE, 0x00000032); /* 0x141C */ - GT_REG_WRITE(MV64460_SDRAM_OPERATION, SDRAM_MODE_REG_SETUP); /* 0x1418 */ - do { - tmp = GTREGREAD(MV64460_SDRAM_OPERATION); - } while(tmp != 0x0); - - /* wait 200 cycles */ - udelay(2); /* FIXME make this dynamic for the system clock */ - - /* SDRAM init done */ - memory_map_bank(0, CONFIG_SYS_SDRAM_BASE, (256 << 20)); -#ifdef CONFIG_SYS_SDRAM1_BASE - memory_map_bank(1, CONFIG_SYS_SDRAM1_BASE, (256 << 20)); -#endif - - /* DUNIT_MMASK: enable SnoopHitEn bit to avoid errata CPU-#4 - */ - tmp = GTREGREAD(MV64460_D_UNIT_MMASK); /* 0x14B0 */ - GT_REG_WRITE(MV64460_D_UNIT_MMASK, tmp | 0x2); - - start = (0 << 20); -#ifdef CONFIG_P3M750 - size = (512 << 20); -#elif defined (CONFIG_P3M7448) - size = (128 << 20); -#endif - -#ifdef CONFIG_MV64460_ECC - memSpaceAttr = ((~(BIT0 << 0)) & 0xf) << 8; - mvDmaSetMemorySpace (0, 0, memSpaceAttr, start, size); - for (dest = start; dest < start + size; dest += _8M) { - mvDmaTransfer (0, start, dest, _8M, - BIT8 /*DMA_DTL_128BYTES */ | - BIT3 /*DMA_HOLD_SOURCE_ADDR */ | - BIT11 /*DMA_BLOCK_TRANSFER_MODE */ ); - while (mvDmaIsChannelActive (0)); - } -#endif - - return (size); -} - -void board_add_ram_info(int use_default) -{ - u32 val; - - puts(" (CL="); - switch ((GTREGREAD(MV64460_SDRAM_MODE) >> 4) & 0x7) { - case 0x2: - puts("2"); - break; - case 0x3: - puts("3"); - break; - case 0x5: - puts("1.5"); - break; - case 0x6: - puts("2.5"); - break; - } - - val = GTREGREAD(MV64460_SDRAM_CONFIG); - - puts(", ECC "); - if (val & 0x00001000) - puts("enabled)"); - else - puts("not enabled)"); -} - -/* - * mvDmaIsChannelActive - Check if IDMA channel is active - * - * channel = IDMA channel number from 0 to 7 - */ -int mvDmaIsChannelActive (int channel) -{ - ulong data; - - data = GTREGREAD (MV64460_DMA_CHANNEL0_CONTROL + 4 * channel); - if (data & BIT14) /* activity status */ - return 1; - - return 0; -} - -/* - * mvDmaSetMemorySpace - Set a DMA memory window for the DMA's address decoding - * map. - * - * memSpace = IDMA memory window number from 0 to 7 - * trg_if = Target interface: - * 0x0 DRAM - * 0x1 Device Bus - * 0x2 Integrated SDRAM (or CPU bus 60x only) - * 0x3 PCI0 - * 0x4 PCI1 - * attr = IDMA attributes (see MV datasheet) - * base_addr = Sets up memory window for transfers - * - */ -int mvDmaSetMemorySpace (ulong memSpace, - ulong trg_if, - ulong attr, ulong base_addr, ulong size) -{ - ulong temp; - - /* The base address must be aligned to the size. */ - if (base_addr % size != 0) - return 0; - - if (size >= 0x10000) { /* 64K */ - size &= 0xffff0000; - base_addr = (base_addr & 0xffff0000); - /* Set the new attributes */ - GT_REG_WRITE (MV64460_DMA_BASE_ADDR_REG0 + memSpace * 8, - (base_addr | trg_if | attr)); - GT_REG_WRITE ((MV64460_DMA_SIZE_REG0 + memSpace * 8), - (size - 1) & 0xffff0000); - temp = GTREGREAD (MV64460_DMA_BASE_ADDR_ENABLE_REG); - GT_REG_WRITE (DMA_BASE_ADDR_ENABLE_REG, - (temp & ~(BIT0 << memSpace))); - return 1; - } - - return 0; -} - -/* - * mvDmaTransfer - Transfer data from src_addr to dst_addr on one of the 4 - * DMA channels. - * - * channel = IDMA channel number from 0 to 3 - * destAddr = Destination address - * sourceAddr = Source address - * size = Size in bytes - * command = See MV datasheet - * - */ -int mvDmaTransfer (int channel, ulong sourceAddr, - ulong destAddr, ulong size, ulong command) -{ - ulong engOffReg = 0; /* Engine Offset Register */ - - if (size > 0xffff) - command = command | BIT31; /* DMA_16M_DESCRIPTOR_MODE */ - command = command | ((command >> 6) & 0x7); - engOffReg = channel * 4; - GT_REG_WRITE (MV64460_DMA_CHANNEL0_BYTE_COUNT + engOffReg, size); - GT_REG_WRITE (MV64460_DMA_CHANNEL0_SOURCE_ADDR + engOffReg, sourceAddr); - GT_REG_WRITE (MV64460_DMA_CHANNEL0_DESTINATION_ADDR + engOffReg, destAddr); - command = command | - BIT12 | /* DMA_CHANNEL_ENABLE */ - BIT9; /* DMA_NON_CHAIN_MODE */ - /* Activate DMA channel By writting to mvDmaControlRegister */ - GT_REG_WRITE (MV64460_DMA_CHANNEL0_CONTROL + engOffReg, command); - return 1; -} - -/**************************************************************************************** - * SDRAM INIT * - * This procedure detect all Sdram types: 64, 128, 256, 512 Mbit, 1Gbit and 2Gb * - * This procedure fits only the Atlantis * - * * - ***************************************************************************************/ - -/**************************************************************************************** - * DFCDL initialize MV643xx Design Considerations * - * * - ***************************************************************************************/ -int set_dfcdlInit (void) -{ - int i; - - /* Values from MV64460 User Manual */ - unsigned int dfcdl_tbl[] = { 0x00000000, 0x00000001, 0x00000042, 0x00000083, - 0x000000c4, 0x00000105, 0x00000146, 0x00000187, - 0x000001c8, 0x00000209, 0x0000024a, 0x0000028b, - 0x000002cc, 0x0000030d, 0x0000034e, 0x0000038f, - 0x000003d0, 0x00000411, 0x00000452, 0x00000493, - 0x000004d4, 0x00000515, 0x00000556, 0x00000597, - 0x000005d8, 0x00000619, 0x0000065a, 0x0000069b, - 0x000006dc, 0x0000071d, 0x0000075e, 0x0000079f, - 0x000007e0, 0x00000821, 0x00000862, 0x000008a3, - 0x000008e4, 0x00000925, 0x00000966, 0x000009a7, - 0x000009e8, 0x00000a29, 0x00000a6a, 0x00000aab, - 0x00000aec, 0x00000b2d, 0x00000b6e, 0x00000baf, - 0x00000bf0, 0x00000c31, 0x00000c72, 0x00000cb3, - 0x00000cf4, 0x00000d35, 0x00000d76, 0x00000db7, - 0x00000df8, 0x00000e39, 0x00000e7a, 0x00000ebb, - 0x00000efc, 0x00000f3d, 0x00000f7e, 0x00000fbf }; - - for (i = 0; i < 64; i++) - GT_REG_WRITE (SRAM_DATA0, dfcdl_tbl[i]); - GT_REG_WRITE (DFCDL_CONFIG0, 0x00300000); /* enable dynamic delay line updating */ - - return (0); -} diff --git a/board/prodrive/p3mx/serial.c b/board/prodrive/p3mx/serial.c deleted file mode 100644 index 5b7b989860..0000000000 --- a/board/prodrive/p3mx/serial.c +++ /dev/null @@ -1,106 +0,0 @@ -/* - * (C) Copyright 2001 - * Josh Huber <huber@mclx.com>, Mission Critical Linux, Inc. - * - * modified for marvell db64360 eval board by - * Ingo Assmus <ingo.assmus@keymile.com> - * - * modified for cpci750 board by - * Reinhard Arlt <reinhard.arlt@esd-electronics.com> - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -/* - * serial.c - serial support for esd cpci750 board - */ - -/* supports the MPSC */ - -#include <common.h> -#include <command.h> -#include <serial.h> -#include <linux/compiler.h> - -#include "../../Marvell/include/memory.h" - -#include "mpsc.h" - -DECLARE_GLOBAL_DATA_PTR; - -static int p3mx_serial_init(void) -{ - mpsc_init (gd->baudrate); - - return (0); -} - -static void p3mx_serial_putc(const char c) -{ - if (c == '\n') - mpsc_putchar ('\r'); - - mpsc_putchar (c); -} - -static int p3mx_serial_getc(void) -{ - return mpsc_getchar (); -} - -static int p3mx_serial_tstc(void) -{ - return mpsc_test_char (); -} - -static void p3mx_serial_setbrg(void) -{ - galbrg_set_baudrate (CONFIG_MPSC_PORT, gd->baudrate); -} - -static struct serial_device p3mx_serial_drv = { - .name = "p3mx_serial", - .start = p3mx_serial_init, - .stop = NULL, - .setbrg = p3mx_serial_setbrg, - .putc = p3mx_serial_putc, - .puts = default_serial_puts, - .getc = p3mx_serial_getc, - .tstc = p3mx_serial_tstc, -}; - -void p3mx_serial_initialize(void) -{ - serial_register(&p3mx_serial_drv); -} - -__weak struct serial_device *default_serial_console(void) -{ - return &p3mx_serial_drv; -} - -#if defined(CONFIG_CMD_KGDB) -void kgdb_serial_init (void) -{ -} - -void putDebugChar (int c) -{ - serial_putc (c); -} - -void putDebugStr (const char *str) -{ - serial_puts (str); -} - -int getDebugChar (void) -{ - return serial_getc (); -} - -void kgdb_interruptible (int yes) -{ - return; -} -#endif |