summaryrefslogtreecommitdiff
path: root/board/ti/ti814x
diff options
context:
space:
mode:
Diffstat (limited to 'board/ti/ti814x')
-rw-r--r--board/ti/ti814x/Kconfig15
-rw-r--r--board/ti/ti814x/MAINTAINERS6
-rw-r--r--board/ti/ti814x/Makefile11
-rw-r--r--board/ti/ti814x/evm.c190
-rw-r--r--board/ti/ti814x/evm.h8
-rw-r--r--board/ti/ti814x/mux.c86
6 files changed, 0 insertions, 316 deletions
diff --git a/board/ti/ti814x/Kconfig b/board/ti/ti814x/Kconfig
deleted file mode 100644
index 2960099a8e..0000000000
--- a/board/ti/ti814x/Kconfig
+++ /dev/null
@@ -1,15 +0,0 @@
-if TARGET_TI814X_EVM
-
-config SYS_BOARD
- default "ti814x"
-
-config SYS_VENDOR
- default "ti"
-
-config SYS_SOC
- default "am33xx"
-
-config SYS_CONFIG_NAME
- default "ti814x_evm"
-
-endif
diff --git a/board/ti/ti814x/MAINTAINERS b/board/ti/ti814x/MAINTAINERS
deleted file mode 100644
index b2ee39e8a3..0000000000
--- a/board/ti/ti814x/MAINTAINERS
+++ /dev/null
@@ -1,6 +0,0 @@
-TI814X BOARD
-M: Tom Rini <trini@konsulko.com>
-S: Maintained
-F: board/ti/ti814x/
-F: include/configs/ti814x_evm.h
-F: configs/ti814x_evm_defconfig
diff --git a/board/ti/ti814x/Makefile b/board/ti/ti814x/Makefile
deleted file mode 100644
index c5ff8d0728..0000000000
--- a/board/ti/ti814x/Makefile
+++ /dev/null
@@ -1,11 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0+
-#
-# Makefile
-#
-# Copyright (C) 2013 Texas Instruments Incorporated - http://www.ti.com/
-
-ifdef CONFIG_SPL_BUILD
-obj-y := mux.o
-endif
-
-obj-y += evm.o
diff --git a/board/ti/ti814x/evm.c b/board/ti/ti814x/evm.c
deleted file mode 100644
index 8ed80d2f46..0000000000
--- a/board/ti/ti814x/evm.c
+++ /dev/null
@@ -1,190 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-/*
- * evm.c
- *
- * Board functions for TI814x EVM
- *
- * Copyright (C) 2011, Texas Instruments, Incorporated - http://www.ti.com/
- */
-
-#include <common.h>
-#include <cpsw.h>
-#include <env.h>
-#include <errno.h>
-#include <init.h>
-#include <net.h>
-#include <spl.h>
-#include <asm/arch/cpu.h>
-#include <asm/arch/hardware.h>
-#include <asm/arch/omap.h>
-#include <asm/arch/ddr_defs.h>
-#include <asm/arch/clock.h>
-#include <asm/arch/gpio.h>
-#include <asm/arch/mmc_host_def.h>
-#include <asm/arch/sys_proto.h>
-#include <asm/io.h>
-#include <asm/emif.h>
-#include <asm/gpio.h>
-#include "evm.h"
-
-DECLARE_GLOBAL_DATA_PTR;
-
-static struct ctrl_dev *cdev = (struct ctrl_dev *)CTRL_DEVICE_BASE;
-
-/* UART Defines */
-#ifdef CONFIG_SPL_BUILD
-static const struct cmd_control evm_ddr2_cctrl_data = {
- .cmd0csratio = 0x80,
- .cmd0iclkout = 0x00,
-
- .cmd1csratio = 0x80,
- .cmd1iclkout = 0x00,
-
- .cmd2csratio = 0x80,
- .cmd2iclkout = 0x00,
-};
-
-static const struct emif_regs evm_ddr2_emif0_regs = {
- .sdram_config = 0x40801ab2,
- .ref_ctrl = 0x10000c30,
- .sdram_tim1 = 0x0aaaf552,
- .sdram_tim2 = 0x043631d2,
- .sdram_tim3 = 0x00000327,
- .emif_ddr_phy_ctlr_1 = 0x00000007
-};
-
-static const struct emif_regs evm_ddr2_emif1_regs = {
- .sdram_config = 0x40801ab2,
- .ref_ctrl = 0x10000c30,
- .sdram_tim1 = 0x0aaaf552,
- .sdram_tim2 = 0x043631d2,
- .sdram_tim3 = 0x00000327,
- .emif_ddr_phy_ctlr_1 = 0x00000007
-};
-
-const struct dmm_lisa_map_regs evm_lisa_map_regs = {
- .dmm_lisa_map_0 = 0x00000000,
- .dmm_lisa_map_1 = 0x00000000,
- .dmm_lisa_map_2 = 0x806c0300,
- .dmm_lisa_map_3 = 0x806c0300,
-};
-
-static const struct ddr_data evm_ddr2_data = {
- .datardsratio0 = ((0x35<<10) | (0x35<<0)),
- .datawdsratio0 = ((0x20<<10) | (0x20<<0)),
- .datawiratio0 = ((0<<10) | (0<<0)),
- .datagiratio0 = ((0<<10) | (0<<0)),
- .datafwsratio0 = ((0x90<<10) | (0x90<<0)),
- .datawrsratio0 = ((0x50<<10) | (0x50<<0)),
-};
-
-void set_uart_mux_conf(void)
-{
- /* Set UART pins */
- enable_uart0_pin_mux();
-}
-
-void set_mux_conf_regs(void)
-{
- /* Set MMC pins */
- enable_mmc1_pin_mux();
-
- /* Set Ethernet pins */
- enable_enet_pin_mux();
-}
-
-void sdram_init(void)
-{
- config_dmm(&evm_lisa_map_regs);
-
- config_ddr(0, NULL, &evm_ddr2_data, &evm_ddr2_cctrl_data,
- &evm_ddr2_emif0_regs, 0);
- config_ddr(0, NULL, &evm_ddr2_data, &evm_ddr2_cctrl_data,
- &evm_ddr2_emif1_regs, 1);
-}
-#endif
-
-/*
- * Basic board specific setup. Pinmux has been handled already.
- */
-int board_init(void)
-{
- gd->bd->bi_boot_params = CONFIG_SYS_SDRAM_BASE + 0x100;
- return 0;
-}
-
-#if defined(CONFIG_MMC)
-int board_mmc_init(bd_t *bis)
-{
- omap_mmc_init(1, 0, 0, -1, -1);
-
- return 0;
-}
-#endif
-
-#ifdef CONFIG_DRIVER_TI_CPSW
-static void cpsw_control(int enabled)
-{
- /* VTP can be added here */
-
- return;
-}
-
-static struct cpsw_slave_data cpsw_slaves[] = {
- {
- .slave_reg_ofs = 0x50,
- .sliver_reg_ofs = 0x700,
- .phy_addr = 1,
- },
- {
- .slave_reg_ofs = 0x90,
- .sliver_reg_ofs = 0x740,
- .phy_addr = 0,
- },
-};
-
-static struct cpsw_platform_data cpsw_data = {
- .mdio_base = CPSW_MDIO_BASE,
- .cpsw_base = CPSW_BASE,
- .mdio_div = 0xff,
- .channels = 8,
- .cpdma_reg_ofs = 0x100,
- .slaves = 1,
- .slave_data = cpsw_slaves,
- .ale_reg_ofs = 0x600,
- .ale_entries = 1024,
- .host_port_reg_ofs = 0x28,
- .hw_stats_reg_ofs = 0x400,
- .bd_ram_ofs = 0x2000,
- .mac_control = (1 << 5),
- .control = cpsw_control,
- .host_port_num = 0,
- .version = CPSW_CTRL_VERSION_1,
-};
-#endif
-
-int board_eth_init(bd_t *bis)
-{
- uint8_t mac_addr[6];
- uint32_t mac_hi, mac_lo;
-
- if (!eth_env_get_enetaddr("ethaddr", mac_addr)) {
- printf("<ethaddr> not set. Reading from E-fuse\n");
- /* try reading mac address from efuse */
- mac_lo = readl(&cdev->macid0l);
- mac_hi = readl(&cdev->macid0h);
- mac_addr[0] = mac_hi & 0xFF;
- mac_addr[1] = (mac_hi & 0xFF00) >> 8;
- mac_addr[2] = (mac_hi & 0xFF0000) >> 16;
- mac_addr[3] = (mac_hi & 0xFF000000) >> 24;
- mac_addr[4] = mac_lo & 0xFF;
- mac_addr[5] = (mac_lo & 0xFF00) >> 8;
-
- if (is_valid_ethaddr(mac_addr))
- eth_env_set_enetaddr("ethaddr", mac_addr);
- else
- printf("Unable to read MAC address. Set <ethaddr>\n");
- }
-
- return cpsw_register(&cpsw_data);
-}
diff --git a/board/ti/ti814x/evm.h b/board/ti/ti814x/evm.h
deleted file mode 100644
index 6aebec62d4..0000000000
--- a/board/ti/ti814x/evm.h
+++ /dev/null
@@ -1,8 +0,0 @@
-#ifndef _EVM_H
-#define _EVM_H
-
-void enable_uart0_pin_mux(void);
-void enable_mmc1_pin_mux(void);
-void enable_enet_pin_mux(void);
-
-#endif /* _EVM_H */
diff --git a/board/ti/ti814x/mux.c b/board/ti/ti814x/mux.c
deleted file mode 100644
index fd9f364511..0000000000
--- a/board/ti/ti814x/mux.c
+++ /dev/null
@@ -1,86 +0,0 @@
-/*
- * mux.c
- *
- * Copyright (C) 2011 Texas Instruments Incorporated - http://www.ti.com/
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation version 2.
- *
- * This program is distributed "as is" WITHOUT ANY WARRANTY of any
- * kind, whether express or implied; without even the implied warranty
- * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- */
-
-#include <common.h>
-#include <asm/arch/sys_proto.h>
-#include <asm/arch/hardware.h>
-#include <asm/arch/mux.h>
-#include <asm/io.h>
-#include <i2c.h>
-#include "evm.h"
-
-static struct module_pin_mux uart0_pin_mux[] = {
- {OFFSET(pincntl70), PULLUP_EN | MODE(0x01)}, /* UART0_RXD */
- {OFFSET(pincntl71), PULLUP_EN | MODE(0x01)}, /* UART0_TXD */
- {-1},
-};
-
-static struct module_pin_mux mmc1_pin_mux[] = {
- {OFFSET(pincntl1), PULLUP_EN | MODE(0x01)}, /* SD1_CLK */
- {OFFSET(pincntl2), PULLUP_EN | MODE(0x01)}, /* SD1_CMD */
- {OFFSET(pincntl3), PULLUP_EN | MODE(0x01)}, /* SD1_DAT[0] */
- {OFFSET(pincntl4), PULLUP_EN | MODE(0x01)}, /* SD1_DAT[1] */
- {OFFSET(pincntl5), PULLUP_EN | MODE(0x01)}, /* SD1_DAT[2] */
- {OFFSET(pincntl6), PULLUP_EN | MODE(0x01)}, /* SD1_DAT[3] */
- {OFFSET(pincntl74), PULLUP_EN | MODE(0x40)}, /* SD1_POW */
- {OFFSET(pincntl75), MODE(0x40)}, /* SD1_SDWP */
- {OFFSET(pincntl80), PULLUP_EN | MODE(0x02)}, /* SD1_SDCD */
- {-1},
-};
-
-static struct module_pin_mux enet_pin_mux[] = {
- {OFFSET(pincntl232), MODE(0x01)}, /* EMAC_RMREFCLK */
- {OFFSET(pincntl233), PULLUP_EN | MODE(0x01)}, /* MDCLK */
- {OFFSET(pincntl234), PULLUP_EN | MODE(0x01)}, /* MDIO */
- {OFFSET(pincntl235), MODE(0x01)}, /* EMAC[0]_MTCLK */
- {OFFSET(pincntl236), MODE(0x01)}, /* EMAC[0]_MCOL */
- {OFFSET(pincntl237), MODE(0x01)}, /* EMAC[0]_MCRS */
- {OFFSET(pincntl238), MODE(0x01)}, /* EMAC[0]_MRXER */
- {OFFSET(pincntl239), MODE(0x01)}, /* EMAC[0]_MRCLK */
- {OFFSET(pincntl240), MODE(0x01)}, /* EMAC[0]_MRXD[0] */
- {OFFSET(pincntl241), MODE(0x01)}, /* EMAC[0]_MRXD[1] */
- {OFFSET(pincntl242), MODE(0x01)}, /* EMAC[0]_MRXD[2] */
- {OFFSET(pincntl243), MODE(0x01)}, /* EMAC[0]_MRXD[3] */
- {OFFSET(pincntl244), MODE(0x01)}, /* EMAC[0]_MRXD[4] */
- {OFFSET(pincntl245), MODE(0x01)}, /* EMAC[0]_MRXD[5] */
- {OFFSET(pincntl246), MODE(0x01)}, /* EMAC[0]_MRXD[6] */
- {OFFSET(pincntl247), MODE(0x01)}, /* EMAC[0]_MRXD[7] */
- {OFFSET(pincntl248), MODE(0x01)}, /* EMAC[0]_MRXDV */
- {OFFSET(pincntl249), MODE(0x01)}, /* EMAC[0]_GMTCLK */
- {OFFSET(pincntl250), MODE(0x01)}, /* EMAC[0]_MTXD[0] */
- {OFFSET(pincntl251), MODE(0x01)}, /* EMAC[0]_MTXD[1] */
- {OFFSET(pincntl252), MODE(0x01)}, /* EMAC[0]_MTXD[2] */
- {OFFSET(pincntl253), MODE(0x01)}, /* EMAC[0]_MTXD[3] */
- {OFFSET(pincntl254), MODE(0x01)}, /* EMAC[0]_MTXD[4] */
- {OFFSET(pincntl255), MODE(0x01)}, /* EMAC[0]_MTXD[5] */
- {OFFSET(pincntl256), MODE(0x01)}, /* EMAC[0]_MTXD[6] */
- {OFFSET(pincntl257), MODE(0x01)}, /* EMAC[0]_MTXD[7] */
- {OFFSET(pincntl258), MODE(0x01)}, /* EMAC[0]_MTXEN */
-};
-
-void enable_uart0_pin_mux(void)
-{
- configure_module_pin_mux(uart0_pin_mux);
-}
-
-void enable_mmc1_pin_mux(void)
-{
- configure_module_pin_mux(mmc1_pin_mux);
-}
-
-void enable_enet_pin_mux(void)
-{
- configure_module_pin_mux(enet_pin_mux);
-}