1 files changed, 0 insertions, 66 deletions
diff --git a/board/toradex/apalis-imx8/README b/board/toradex/apalis-imx8/README
deleted file mode 100644
index e6e3dcb367..0000000000
--- a/board/toradex/apalis-imx8/README
+++ /dev/null
@@ -1,66 +0,0 @@
-U-Boot for the Toradex Apalis iMX8QM V1.0B Module
-
-Quick Start
-===========
-
-- Build the ARM trusted firmware binary
-- Get scfw_tcm.bin and ahab-container.img
-- Build U-Boot
-- Load U-Boot binary using uuu
-- Flash U-Boot binary into the eMMC
-- Boot
-
-Get and Build the ARM Trusted Firmware
-======================================
-
-$ git clone -b imx_4.14.78_1.0.0_ga https://source.codeaurora.org/external/imx/imx-atf
-$ cd imx-atf/
-$ make PLAT=imx8qm bl31
-
-Get scfw_tcm.bin and ahab-container.img
-=======================================
-
-$ wget https://github.com/toradex/meta-fsl-bsp-release/blob/toradex-sumo-4.14.78-1.0.0_ga-bringup/imx/meta-bsp/recipes-bsp/imx-sc-firmware/files/mx8qm-apalis-scfw-tcm.bin?raw=true
-$ mv mx8qm-apalis-scfw-tcm.bin\?raw\=true mx8qm-apalis-scfw-tcm.bin
-$ wget https://www.nxp.com/lgfiles/NMG/MAD/YOCTO/firmware-imx-8.0.bin
-$ chmod +x firmware-imx-8.0.bin
-$ ./firmware-imx-8.0.bin
-
-Copy the following binaries to the U-Boot folder:
-
-$ cp imx-atf/build/imx8qm/release/bl31.bin .
-$ cp u-boot/u-boot.bin .
-
-Copy the following firmware to the U-Boot folder:
-
-$ cp firmware-imx-8.0/firmware/seco/ahab-container.img .
-
-Build U-Boot
-============
-
-$ make apalis-imx8qm_defconfig
-$ make u-boot-dtb.imx
-
-Load the U-Boot Binary Using UUU
-================================
-
-Get the latest version of the universal update utility (uuu) aka mfgtools 3.0:
-
-https://community.nxp.com/external-link.jspa?url=https%3A%2F%2Fgithub.com%2FNXPmicro%2Fmfgtools%2Freleases
-
-Put the module into USB recovery aka serial downloader mode, connect USB device
-to your host and execute uuu:
-
-sudo ./uuu u-boot/u-boot-dtb.imx
-
-Flash the U-Boot Binary into the eMMC
-=====================================
-
-Burn the u-boot-dtb.imx binary to the primary eMMC hardware boot area partition:
-
-load mmc 1:1 $loadaddr u-boot-dtb.imx
-setexpr blkcnt ${filesize} + 0x1ff && setexpr blkcnt ${blkcnt} / 0x200
-mmc dev 0 1
-mmc write ${loadaddr} 0x0 ${blkcnt}
-
-Boot