summaryrefslogtreecommitdiff
path: root/board
diff options
context:
space:
mode:
Diffstat (limited to 'board')
-rw-r--r--board/sunxi/board.c2
-rw-r--r--board/ti/am57xx/board.c106
-rw-r--r--board/ti/dra7xx/evm.c123
3 files changed, 39 insertions, 192 deletions
diff --git a/board/sunxi/board.c b/board/sunxi/board.c
index 8e20dc7e43..917f5b18f6 100644
--- a/board/sunxi/board.c
+++ b/board/sunxi/board.c
@@ -665,7 +665,7 @@ int g_dnl_board_usb_cable_connected(void)
struct phy phy;
int ret;
- ret = uclass_get_device(UCLASS_USB_DEV_GENERIC, 0, &dev);
+ ret = uclass_get_device(UCLASS_USB_GADGET_GENERIC, 0, &dev);
if (ret) {
pr_err("%s: Cannot find USB device\n", __func__);
return ret;
diff --git a/board/ti/am57xx/board.c b/board/ti/am57xx/board.c
index 177a3246c3..8dfb2eea43 100644
--- a/board/ti/am57xx/board.c
+++ b/board/ti/am57xx/board.c
@@ -675,6 +675,19 @@ out:
return;
}
+#if CONFIG_IS_ENABLED(DM_USB) && CONFIG_IS_ENABLED(OF_CONTROL)
+static int device_okay(const char *path)
+{
+ int node;
+
+ node = fdt_path_offset(gd->fdt_blob, path);
+ if (node < 0)
+ return 0;
+
+ return fdtdec_get_is_enabled(gd->fdt_blob, node);
+}
+#endif
+
int board_late_init(void)
{
setup_board_eeprom_env();
@@ -714,6 +727,12 @@ int board_late_init(void)
board_ti_set_ethaddr(2);
#endif
+#if CONFIG_IS_ENABLED(DM_USB) && CONFIG_IS_ENABLED(OF_CONTROL)
+ if (device_okay("/ocp/omap_dwc3_1@48880000"))
+ enable_usb_clocks(0);
+ if (device_okay("/ocp/omap_dwc3_2@488c0000"))
+ enable_usb_clocks(1);
+#endif
return 0;
}
@@ -864,93 +883,6 @@ int spl_start_uboot(void)
}
#endif
-#ifdef CONFIG_USB_DWC3
-static struct dwc3_device usb_otg_ss2 = {
- .maximum_speed = USB_SPEED_HIGH,
- .base = DRA7_USB_OTG_SS2_BASE,
- .tx_fifo_resize = false,
- .index = 1,
-};
-
-static struct dwc3_omap_device usb_otg_ss2_glue = {
- .base = (void *)DRA7_USB_OTG_SS2_GLUE_BASE,
- .utmi_mode = DWC3_OMAP_UTMI_MODE_SW,
- .index = 1,
-};
-
-static struct ti_usb_phy_device usb_phy2_device = {
- .usb2_phy_power = (void *)DRA7_USB2_PHY2_POWER,
- .index = 1,
-};
-
-int usb_gadget_handle_interrupts(int index)
-{
- u32 status;
-
- status = dwc3_omap_uboot_interrupt_status(index);
- if (status)
- dwc3_uboot_handle_interrupt(index);
-
- return 0;
-}
-#endif /* CONFIG_USB_DWC3 */
-
-#if defined(CONFIG_USB_DWC3) || defined(CONFIG_USB_XHCI_OMAP)
-int board_usb_init(int index, enum usb_init_type init)
-{
- enable_usb_clocks(index);
- switch (index) {
- case 0:
- if (init == USB_INIT_DEVICE) {
- printf("port %d can't be used as device\n", index);
- disable_usb_clocks(index);
- return -EINVAL;
- }
- break;
- case 1:
- if (init == USB_INIT_DEVICE) {
-#ifdef CONFIG_USB_DWC3
- usb_otg_ss2.dr_mode = USB_DR_MODE_PERIPHERAL;
- usb_otg_ss2_glue.vbus_id_status = OMAP_DWC3_VBUS_VALID;
- ti_usb_phy_uboot_init(&usb_phy2_device);
- dwc3_omap_uboot_init(&usb_otg_ss2_glue);
- dwc3_uboot_init(&usb_otg_ss2);
-#endif
- } else {
- printf("port %d can't be used as host\n", index);
- disable_usb_clocks(index);
- return -EINVAL;
- }
-
- break;
- default:
- printf("Invalid Controller Index\n");
- }
-
- return 0;
-}
-
-int board_usb_cleanup(int index, enum usb_init_type init)
-{
-#ifdef CONFIG_USB_DWC3
- switch (index) {
- case 0:
- case 1:
- if (init == USB_INIT_DEVICE) {
- ti_usb_phy_uboot_exit(index);
- dwc3_uboot_exit(index);
- dwc3_omap_uboot_exit(index);
- }
- break;
- default:
- printf("Invalid Controller Index\n");
- }
-#endif
- disable_usb_clocks(index);
- return 0;
-}
-#endif /* defined(CONFIG_USB_DWC3) || defined(CONFIG_USB_XHCI_OMAP) */
-
#ifdef CONFIG_DRIVER_TI_CPSW
/* Delay value to add to calibrated value */
diff --git a/board/ti/dra7xx/evm.c b/board/ti/dra7xx/evm.c
index bbe54450ae..d69641e3a0 100644
--- a/board/ti/dra7xx/evm.c
+++ b/board/ti/dra7xx/evm.c
@@ -646,6 +646,19 @@ int dram_init_banksize(void)
return 0;
}
+#if CONFIG_IS_ENABLED(DM_USB) && CONFIG_IS_ENABLED(OF_CONTROL)
+static int device_okay(const char *path)
+{
+ int node;
+
+ node = fdt_path_offset(gd->fdt_blob, path);
+ if (node < 0)
+ return 0;
+
+ return fdtdec_get_is_enabled(gd->fdt_blob, node);
+}
+#endif
+
int board_late_init(void)
{
#ifdef CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG
@@ -685,6 +698,12 @@ int board_late_init(void)
if (board_is_dra71x_evm())
palmas_i2c_write_u8(LP873X_I2C_SLAVE_ADDR, 0x9, 0x7);
#endif
+#if CONFIG_IS_ENABLED(DM_USB) && CONFIG_IS_ENABLED(OF_CONTROL)
+ if (device_okay("/ocp/omap_dwc3_1@48880000"))
+ enable_usb_clocks(0);
+ if (device_okay("/ocp/omap_dwc3_2@488c0000"))
+ enable_usb_clocks(1);
+#endif
return 0;
}
@@ -896,110 +915,6 @@ const struct mmc_platform_fixups *platform_fixups_mmc(uint32_t addr)
}
#endif
-#ifdef CONFIG_USB_DWC3
-static struct dwc3_device usb_otg_ss1 = {
- .maximum_speed = USB_SPEED_SUPER,
- .base = DRA7_USB_OTG_SS1_BASE,
- .tx_fifo_resize = false,
- .index = 0,
-};
-
-static struct dwc3_omap_device usb_otg_ss1_glue = {
- .base = (void *)DRA7_USB_OTG_SS1_GLUE_BASE,
- .utmi_mode = DWC3_OMAP_UTMI_MODE_SW,
- .index = 0,
-};
-
-static struct ti_usb_phy_device usb_phy1_device = {
- .pll_ctrl_base = (void *)DRA7_USB3_PHY1_PLL_CTRL,
- .usb2_phy_power = (void *)DRA7_USB2_PHY1_POWER,
- .usb3_phy_power = (void *)DRA7_USB3_PHY1_POWER,
- .index = 0,
-};
-
-static struct dwc3_device usb_otg_ss2 = {
- .maximum_speed = USB_SPEED_SUPER,
- .base = DRA7_USB_OTG_SS2_BASE,
- .tx_fifo_resize = false,
- .index = 1,
-};
-
-static struct dwc3_omap_device usb_otg_ss2_glue = {
- .base = (void *)DRA7_USB_OTG_SS2_GLUE_BASE,
- .utmi_mode = DWC3_OMAP_UTMI_MODE_SW,
- .index = 1,
-};
-
-static struct ti_usb_phy_device usb_phy2_device = {
- .usb2_phy_power = (void *)DRA7_USB2_PHY2_POWER,
- .index = 1,
-};
-
-int board_usb_init(int index, enum usb_init_type init)
-{
- enable_usb_clocks(index);
- switch (index) {
- case 0:
- if (init == USB_INIT_DEVICE) {
- usb_otg_ss1.dr_mode = USB_DR_MODE_PERIPHERAL;
- usb_otg_ss1_glue.vbus_id_status = OMAP_DWC3_VBUS_VALID;
- } else {
- usb_otg_ss1.dr_mode = USB_DR_MODE_HOST;
- usb_otg_ss1_glue.vbus_id_status = OMAP_DWC3_ID_GROUND;
- }
-
- ti_usb_phy_uboot_init(&usb_phy1_device);
- dwc3_omap_uboot_init(&usb_otg_ss1_glue);
- dwc3_uboot_init(&usb_otg_ss1);
- break;
- case 1:
- if (init == USB_INIT_DEVICE) {
- usb_otg_ss2.dr_mode = USB_DR_MODE_PERIPHERAL;
- usb_otg_ss2_glue.vbus_id_status = OMAP_DWC3_VBUS_VALID;
- } else {
- usb_otg_ss2.dr_mode = USB_DR_MODE_HOST;
- usb_otg_ss2_glue.vbus_id_status = OMAP_DWC3_ID_GROUND;
- }
-
- ti_usb_phy_uboot_init(&usb_phy2_device);
- dwc3_omap_uboot_init(&usb_otg_ss2_glue);
- dwc3_uboot_init(&usb_otg_ss2);
- break;
- default:
- printf("Invalid Controller Index\n");
- }
-
- return 0;
-}
-
-int board_usb_cleanup(int index, enum usb_init_type init)
-{
- switch (index) {
- case 0:
- case 1:
- ti_usb_phy_uboot_exit(index);
- dwc3_uboot_exit(index);
- dwc3_omap_uboot_exit(index);
- break;
- default:
- printf("Invalid Controller Index\n");
- }
- disable_usb_clocks(index);
- return 0;
-}
-
-int usb_gadget_handle_interrupts(int index)
-{
- u32 status;
-
- status = dwc3_omap_uboot_interrupt_status(index);
- if (status)
- dwc3_uboot_handle_interrupt(index);
-
- return 0;
-}
-#endif
-
#if defined(CONFIG_SPL_BUILD) && defined(CONFIG_SPL_OS_BOOT)
int spl_start_uboot(void)
{
generated by cgit (git 2.34.1) at 2025-01-24 22:03:54 +0000