summaryrefslogtreecommitdiff
path: root/board
diff options
context:
space:
mode:
Diffstat (limited to 'board')
-rw-r--r--board/birdland/bav335x/Kconfig10
-rw-r--r--board/eets/pdu001/Kconfig16
-rw-r--r--board/hisilicon/hikey/Kconfig7
-rw-r--r--board/tcl/sl50/Kconfig10
-rw-r--r--board/ti/am335x/Kconfig10
-rw-r--r--board/ti/am57xx/Kconfig9
-rw-r--r--board/ti/dra7xx/Kconfig9
-rw-r--r--board/vscom/baltos/Kconfig9
8 files changed, 0 insertions, 80 deletions
diff --git a/board/birdland/bav335x/Kconfig b/board/birdland/bav335x/Kconfig
index 3380ed39b2..40053665aa 100644
--- a/board/birdland/bav335x/Kconfig
+++ b/board/birdland/bav335x/Kconfig
@@ -12,16 +12,6 @@ config SYS_SOC
config SYS_CONFIG_NAME
default "bav335x"
-config CONS_INDEX
- int "UART used for console"
- range 1 6
- default 1
- help
- The AM335x SoC has a total of 6 UARTs (UART0 to UART5 as referenced
- in documentation, etc) available to it. Depending on your specific
- board you may want something other than UART0 as for example the IDK
- uses UART3 so enter 4 here.
-
config BAV_VERSION
int "BAV335x Version (1=A, 2=B)"
range 1 2
diff --git a/board/eets/pdu001/Kconfig b/board/eets/pdu001/Kconfig
index 6217a8f99b..f28ba6e7bf 100644
--- a/board/eets/pdu001/Kconfig
+++ b/board/eets/pdu001/Kconfig
@@ -17,22 +17,6 @@ config SYS_SOC
config SYS_CONFIG_NAME
default "pdu001"
-config CONS_INDEX
- int "UART used for console"
- range 1 6
- default 4
- help
- The AM335x SoC has a total of 6 UARTs (UART0 to UART5 as referenced
- in documentation, etc) available to it. The best choice for the
- PDU001 is UART3 as it is wired to the header K2; enter 4 here to
- use UART3. UART0 is connected to the EIA-485 transceiver. If you
- really need to use it, you are advised to remove the transceiver U14
- from the board. UART1 is wired to the backplane and therefore
- accessible from there or by the backplane connector K1 of the PDU.
- Any other UART then UART3 (enter 4 here), UART1 (enter 2 here) or
- UART0 (enter 1 here) are not sensible since they are not wired to
- any connector and therefore difficult to access.
-
choice
prompt "State of Run LED"
default PDU001_RUN_LED_RED
diff --git a/board/hisilicon/hikey/Kconfig b/board/hisilicon/hikey/Kconfig
index 9171502a19..f7f1055e17 100644
--- a/board/hisilicon/hikey/Kconfig
+++ b/board/hisilicon/hikey/Kconfig
@@ -12,11 +12,4 @@ config SYS_SOC
config SYS_CONFIG_NAME
default "hikey"
-config CONS_INDEX
- int "UART used for console"
- range 1 4
- default 4
- help
- The hi6220 SoC has 5 UARTs. For example to use UART0 enter 1 here.
-
endif
diff --git a/board/tcl/sl50/Kconfig b/board/tcl/sl50/Kconfig
index d0068d9324..1b3f5cfc61 100644
--- a/board/tcl/sl50/Kconfig
+++ b/board/tcl/sl50/Kconfig
@@ -12,14 +12,4 @@ config SYS_SOC
config SYS_CONFIG_NAME
default "am335x_sl50"
-config CONS_INDEX
- int "UART used for console"
- range 1 6
- default 1
- help
- The AM335x SoC has a total of 6 UARTs (UART0 to UART5 as referenced
- in documentation, etc) available to it. Depending on your specific
- board you may want something other than UART0 as for example the IDK
- uses UART3 so enter 4 here.
-
endif
diff --git a/board/ti/am335x/Kconfig b/board/ti/am335x/Kconfig
index 97374bdc12..b66ca1a579 100644
--- a/board/ti/am335x/Kconfig
+++ b/board/ti/am335x/Kconfig
@@ -12,16 +12,6 @@ config SYS_SOC
config SYS_CONFIG_NAME
default "am335x_evm"
-config CONS_INDEX
- int "UART used for console"
- range 1 6
- default 1
- help
- The AM335x SoC has a total of 6 UARTs (UART0 to UART5 as referenced
- in documentation, etc) available to it. Depending on your specific
- board you may want something other than UART0 as for example the IDK
- uses UART3 so enter 4 here.
-
config NOR
bool "Support for NOR flash"
help
diff --git a/board/ti/am57xx/Kconfig b/board/ti/am57xx/Kconfig
index cead0f4f04..0c56682015 100644
--- a/board/ti/am57xx/Kconfig
+++ b/board/ti/am57xx/Kconfig
@@ -9,15 +9,6 @@ config SYS_VENDOR
config SYS_CONFIG_NAME
default "am57xx_evm"
-config CONS_INDEX
- int "UART used for console"
- range 1 6
- default 3
- help
- The AM57x (and DRA7xx) SoC has a total of 6 UARTs available to it.
- Depending on your specific board you may want something other than UART3
- here.
-
source "board/ti/common/Kconfig"
endif
diff --git a/board/ti/dra7xx/Kconfig b/board/ti/dra7xx/Kconfig
index b642113b83..f6a8e07c5b 100644
--- a/board/ti/dra7xx/Kconfig
+++ b/board/ti/dra7xx/Kconfig
@@ -9,15 +9,6 @@ config SYS_VENDOR
config SYS_CONFIG_NAME
default "dra7xx_evm"
-config CONS_INDEX
- int "UART used for console"
- range 1 6
- default 1
- help
- The DRA7xx (and AM57x) SoC has a total of 6 UARTs available to it.
- Depending on your specific board you may want something other than UART1
- here.
-
source "board/ti/common/Kconfig"
endif
diff --git a/board/vscom/baltos/Kconfig b/board/vscom/baltos/Kconfig
index bc1edcf3a4..b721ed19d8 100644
--- a/board/vscom/baltos/Kconfig
+++ b/board/vscom/baltos/Kconfig
@@ -12,13 +12,4 @@ config SYS_SOC
config SYS_CONFIG_NAME
default "baltos"
-config CONS_INDEX
- int "UART used for console"
- range 1 6
- default 1
- help
- The AM335x SoC has a total of 6 UARTs (UART0 to UART5 as referenced
- in documentation, etc) available to it. Depending on your specific
- board you may want something other than UART0.
-
endif