6 files changed, 19 insertions, 22 deletions
diff --git a/board/bf609-ezkit/bf609-ezkit.c b/board/bf609-ezkit/bf609-ezkit.c
index cfc64fe51d..43a43306bb 100644
--- a/board/bf609-ezkit/bf609-ezkit.c
+++ b/board/bf609-ezkit/bf609-ezkit.c
@@ -41,12 +41,12 @@ int board_eth_init(bd_t *bis)
 	if (CONFIG_DW_PORTS & 1) {
 		static const unsigned short pins[] = P_RMII0;
 		if (!peripheral_request_list(pins, "emac0"))
-			ret += designware_initialize(0, EMAC0_MACCFG, 1, 0);
+			ret += designware_initialize(EMAC0_MACCFG, 0);
 	}
 	if (CONFIG_DW_PORTS & 2) {
 		static const unsigned short pins[] = P_RMII1;
 		if (!peripheral_request_list(pins, "emac1"))
-			ret += designware_initialize(1, EMAC1_MACCFG, 1, 0);
+			ret += designware_initialize(EMAC1_MACCFG, 0);
 	}
 
 	return ret;
diff --git a/board/spear/spear300/spear300.c b/board/spear/spear300/spear300.c
index e25aba2f28..6b6bd9f29d 100644
--- a/board/spear/spear300/spear300.c
+++ b/board/spear/spear300/spear300.c
@@ -53,8 +53,7 @@ int board_eth_init(bd_t *bis)
 
 #if defined(CONFIG_DESIGNWARE_ETH)
 	u32 interface = PHY_INTERFACE_MODE_MII;
-	if (designware_initialize(0, CONFIG_SPEAR_ETHBASE, CONFIG_DW0_PHY,
-				interface) >= 0)
+	if (designware_initialize(CONFIG_SPEAR_ETHBASE, interface) >= 0)
 		ret++;
 #endif
 	return ret;
diff --git a/board/spear/spear310/spear310.c b/board/spear/spear310/spear310.c
index 70f9aa16ea..a4c6a8edb0 100644
--- a/board/spear/spear310/spear310.c
+++ b/board/spear/spear310/spear310.c
@@ -54,8 +54,7 @@ int board_eth_init(bd_t *bis)
 
 #if defined(CONFIG_DESIGNWARE_ETH)
 	u32 interface = PHY_INTERFACE_MODE_MII;
-	if (designware_initialize(0, CONFIG_SPEAR_ETHBASE, CONFIG_DW0_PHY,
-				interface) >= 0)
+	if (designware_initialize(CONFIG_SPEAR_ETHBASE, interface) >= 0)
 		ret++;
 #endif
 #if defined(CONFIG_MACB)
diff --git a/board/spear/spear320/spear320.c b/board/spear/spear320/spear320.c
index f6b1fdd0e6..ab732a724c 100644
--- a/board/spear/spear320/spear320.c
+++ b/board/spear/spear320/spear320.c
@@ -65,8 +65,7 @@ int board_eth_init(bd_t *bis)
 
 #if defined(CONFIG_DESIGNWARE_ETH)
 	u32 interface = PHY_INTERFACE_MODE_MII;
-	if (designware_initialize(0, CONFIG_SPEAR_ETHBASE, CONFIG_DW0_PHY,
-				interface) >= 0)
+	if (designware_initialize(CONFIG_SPEAR_ETHBASE, interface) >= 0)
 		ret++;
 #endif
 #if defined(CONFIG_MACB)
diff --git a/board/spear/spear600/spear600.c b/board/spear/spear600/spear600.c
index e996a0e381..8472002f74 100644
--- a/board/spear/spear600/spear600.c
+++ b/board/spear/spear600/spear600.c
@@ -51,8 +51,7 @@ int board_eth_init(bd_t *bis)
 #if defined(CONFIG_DW_AUTONEG)
 	interface = PHY_INTERFACE_MODE_GMII;
 #endif
-	if (designware_initialize(0, CONFIG_SPEAR_ETHBASE, CONFIG_DW0_PHY,
-				interface) >= 0)
+	if (designware_initialize(CONFIG_SPEAR_ETHBASE, interface) >= 0)
 		ret++;
 #endif
 	return ret;
diff --git a/board/spear/x600/x600.c b/board/spear/x600/x600.c
index 044d2049ef..b8edfcd071 100644
--- a/board/spear/x600/x600.c
+++ b/board/spear/x600/x600.c
@@ -67,31 +67,32 @@ void board_nand_init(void)
 		fsmc_nand_init(nand);
 }
 
-int designware_board_phy_init(struct eth_device *dev, int phy_addr,
-	int (*mii_write)(struct eth_device *, u8, u8, u16),
-	int dw_reset_phy(struct eth_device *))
+int board_phy_config(struct phy_device *phydev)
 {
 	/* Extended PHY control 1, select GMII */
-	mii_write(dev, phy_addr, 23, 0x0020);
+	phy_write(phydev, MDIO_DEVAD_NONE, 23, 0x0020);
 
 	/* Software reset necessary after GMII mode selction */
-	dw_reset_phy(dev);
+	phy_reset(phydev);
 
 	/* Enable extended page register access */
-	mii_write(dev, phy_addr, 31, 0x0001);
+	phy_write(phydev, MDIO_DEVAD_NONE, 31, 0x0001);
 
 	/* 17e: Enhanced LED behavior, needs to be written twice */
-	mii_write(dev, phy_addr, 17, 0x09ff);
-	mii_write(dev, phy_addr, 17, 0x09ff);
+	phy_write(phydev, MDIO_DEVAD_NONE, 17, 0x09ff);
+	phy_write(phydev, MDIO_DEVAD_NONE, 17, 0x09ff);
 
 	/* 16e: Enhanced LED method select */
-	mii_write(dev, phy_addr, 16, 0xe0ea);
+	phy_write(phydev, MDIO_DEVAD_NONE, 16, 0xe0ea);
 
 	/* Disable extended page register access */
-	mii_write(dev, phy_addr, 31, 0x0000);
+	phy_write(phydev, MDIO_DEVAD_NONE, 31, 0x0000);
 
 	/* Enable clock output pin */
-	mii_write(dev, phy_addr, 18, 0x0049);
+	phy_write(phydev, MDIO_DEVAD_NONE, 18, 0x0049);
+
+	if (phydev->drv->config)
+		phydev->drv->config(phydev);
 
 	return 0;
 }
@@ -100,7 +101,7 @@ int board_eth_init(bd_t *bis)
 {
 	int ret = 0;
 
-	if (designware_initialize(0, CONFIG_SPEAR_ETHBASE, CONFIG_PHY_ADDR,
+	if (designware_initialize(CONFIG_SPEAR_ETHBASE,
 				  PHY_INTERFACE_MODE_GMII) >= 0)
 		ret++;