diff options
Diffstat (limited to 'board')
| -rw-r--r-- | board/st/stm32mp1/README | 23 |
1 files changed, 23 insertions, 0 deletions
diff --git a/board/st/stm32mp1/README b/board/st/stm32mp1/README index 1cd3534ae4..b0c8325061 100644 --- a/board/st/stm32mp1/README +++ b/board/st/stm32mp1/README @@ -37,6 +37,7 @@ Currently the following boards are supported: + stm32mp157c-ed1 + stm32mp157a-dk1 + stm32mp157c-dk2 ++ stm32mp157a-avenger96 3. Boot Sequences ================= @@ -84,6 +85,9 @@ the supported device trees for stm32mp157 are: + dk2: Discovery board = dk1 with a BT/WiFI combo and a DSI panel dts: stm32mp157c-dk2 ++ avenger96: Avenger96 board from Arrow Electronics + dts: stm32mp157a-avenger96 + 5. Build Procedure ================== @@ -140,6 +144,11 @@ the supported device trees for stm32mp157 are: # make stm32mp15_basic_defconfig # make DEVICE_TREE=stm32mp157c-dk2 all + d) basic boot on avenger96 + # export KBUILD_OUTPUT=stm32mp15_basic + # make stm32mp15_basic_defconfig + # make DEVICE_TREE=stm32mp157a-avenger96 all + 6. Output files BootRom and TF-A expect binaries with STM32 image header @@ -182,6 +191,20 @@ You can select the boot mode, on the board ed1 with the switch SW1 SD-Card 1 1 Recovery 0 0 +- Boot mode of Avenger96 can be selected using switch S3 + + ----------------------------------- + Boot Mode BOOT2 BOOT1 BOOT0 + ----------------------------------- + Recovery 0 0 0 + NOR 0 0 1 + SD-Card 1 0 1 + eMMC 0 1 0 + NAND 0 1 1 + Reserved 1 0 0 + Recovery 1 1 0 + SD-Card 1 1 1 + Recovery is a boot from serial link (UART/USB) and it is used with STM32CubeProgrammer tool to load executable in RAM and to update the flash devices available on the board (NOR/NAND/eMMC/SDCARD). |