diff options
Diffstat (limited to 'board')
-rw-r--r-- | board/mpr2/Kconfig | 9 | ||||
-rw-r--r-- | board/mpr2/MAINTAINERS | 6 | ||||
-rw-r--r-- | board/mpr2/Makefile | 19 | ||||
-rw-r--r-- | board/mpr2/lowlevel_init.S | 117 | ||||
-rw-r--r-- | board/mpr2/mpr2.c | 137 |
5 files changed, 0 insertions, 288 deletions
diff --git a/board/mpr2/Kconfig b/board/mpr2/Kconfig deleted file mode 100644 index 54176e8f6f..0000000000 --- a/board/mpr2/Kconfig +++ /dev/null @@ -1,9 +0,0 @@ -if TARGET_MPR2 - -config SYS_BOARD - default "mpr2" - -config SYS_CONFIG_NAME - default "mpr2" - -endif diff --git a/board/mpr2/MAINTAINERS b/board/mpr2/MAINTAINERS deleted file mode 100644 index beedf8dda6..0000000000 --- a/board/mpr2/MAINTAINERS +++ /dev/null @@ -1,6 +0,0 @@ -MPR2 BOARD -M: Mark Jonas <mark.jonas@de.bosch.com> -S: Maintained -F: board/mpr2/ -F: include/configs/mpr2.h -F: configs/mpr2_defconfig diff --git a/board/mpr2/Makefile b/board/mpr2/Makefile deleted file mode 100644 index 6a71803ac7..0000000000 --- a/board/mpr2/Makefile +++ /dev/null @@ -1,19 +0,0 @@ -# SPDX-License-Identifier: GPL-2.0+ -# -# Copyright (C) 2007 -# Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com> -# -# Copyright (C) 2007 -# Nobuhiro Iwamatsu <iwamatsu@nigauri.org> -# -# Copyright (C) 2007 -# Kenati Technologies, Inc. -# -# (C) Copyright 2008 -# Mark Jonas <mark.jonas@de.bosch.com> -# -# board/mpr2/Makefile -# - -obj-y := mpr2.o -extra-y += lowlevel_init.o diff --git a/board/mpr2/lowlevel_init.S b/board/mpr2/lowlevel_init.S deleted file mode 100644 index e34a7a9a17..0000000000 --- a/board/mpr2/lowlevel_init.S +++ /dev/null @@ -1,117 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0+ */ -/* - * (C) Copyright 2008 - * Mark Jonas <mark.jonas@de.bosch.com> - * - * (C) Copyright 2007 - * Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com> - * - * board/mpr2/lowlevel_init.S - */ -#include <asm/macro.h> - - .global lowlevel_init - - .text - .align 2 - -lowlevel_init: - -/* - * Set frequency multipliers and dividers in FRQCR. - */ - write16 WTCSR_A, WTCSR_D - - write16 WTCNT_A, WTCNT_D - - write16 FRQCR_A, FRQCR_D - -/* - * Setup CS0 (Flash). - */ - write32 CS0BCR_A, CS0BCR_D - - write32 CS0WCR_A, CS0WCR_D - -/* - * Setup CS3 (SDRAM). - */ - write32 CS3BCR_A, CS3BCR_D - - write32 CS3WCR_A, CS3WCR_D - - write32 SDCR_A, SDCR_D1 - - write32 RTCSR_A, RTCSR_D - - write32 RTCNT_A, RTCNT_D - - write32 RTCOR_A, RTCOR_D - - write32 SDCR_A, SDCR_D2 - - mov.l SDMR3_A, r1 - mov.l SDMR3_D, r0 - add r0, r1 - mov #0, r0 - mov.w r0, @r1 - - rts - nop - - .align 4 - -/* - * Configuration for MPR2 A.3 through A.7 - */ - -/* - * PLL Settings - */ -FRQCR_D: .word 0x1103 /* I:B:P=8:4:2 */ -WTCNT_D: .word 0x5A00 /* start counting at zero */ -WTCSR_D: .word 0xA507 /* divide by 4096 */ -.align 2 -/* - * Spansion S29GL256N11 @ 48 MHz - */ -/* 1 idle cycle inserted, normal space, 16 bit */ -CS0BCR_D: .long 0x12490400 -/* tSW=0.5ck, 6 wait cycles, NO external wait, tHW=0.5ck */ -CS0WCR_D: .long 0x00000340 - -/* - * Samsung K4S511632B-UL75 @ 48 MHz - * Micron MT48LC32M16A2-75 @ 48 MHz - */ -/* CS3BCR = 0x10004400, minimum idle cycles, SDRAM, 16 bit */ -CS3BCR_D: .long 0x10004400 -/* tRP=1ck, tRCD=1ck, CL=2, tRWL=2ck, tRC=4ck */ -CS3WCR_D: .long 0x00000091 -/* no refresh, 13 rows, 10 cols, NO bank active mode */ -SDCR_D1: .long 0x00000012 -SDCR_D2: .long 0x00000812 /* refresh */ -RTCSR_D: .long 0xA55A0008 /* 1/4, once */ -RTCNT_D: .long 0xA55A005D /* count 93 */ -RTCOR_D: .long 0xa55a005d /* count 93 */ -/* mode register CL2, burst read and SINGLE WRITE */ -SDMR3_D: .long 0x440 - -/* - * Registers - */ - -FRQCR_A: .long 0xA415FF80 -WTCNT_A: .long 0xA415FF84 -WTCSR_A: .long 0xA415FF86 - -#define BSC_BASE 0xA4FD0000 -CS0BCR_A: .long BSC_BASE + 0x04 -CS3BCR_A: .long BSC_BASE + 0x0C -CS0WCR_A: .long BSC_BASE + 0x24 -CS3WCR_A: .long BSC_BASE + 0x2C -SDCR_A: .long BSC_BASE + 0x44 -RTCSR_A: .long BSC_BASE + 0x48 -RTCNT_A: .long BSC_BASE + 0x4C -RTCOR_A: .long BSC_BASE + 0x50 -SDMR3_A: .long BSC_BASE + 0x5000 diff --git a/board/mpr2/mpr2.c b/board/mpr2/mpr2.c deleted file mode 100644 index 9eb04907a4..0000000000 --- a/board/mpr2/mpr2.c +++ /dev/null @@ -1,137 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0+ -/* - * Copyright (C) 2008 - * Mark Jonas <mark.jonas@de.bosch.com> - * - * board/mpr2/mpr2.c - */ - -#include <common.h> -#include <asm/io.h> -#include <asm/processor.h> - -int checkboard(void) -{ - puts("BOARD: MPR2\n"); - return 0; -} - -int board_init(void) -{ - /* - * For MPR2 A.3 through A.7 - */ - - /* CS2: Ethernet (0xA8000000 - 0xABFFFFFF) */ - __raw_writel(0x36db0400, CS2BCR); /* 4 idle cycles, normal space, 16 bit data bus */ - __raw_writel(0x000003c0, CS2WCR); /* (WR:8), no ext. wait */ - - /* CS4: CAN1 (0xB0000000 - 0xB3FFFFFF) */ - __raw_writel(0x00000200, CS4BCR); /* no idle cycles, normal space, 8 bit data bus */ - __raw_writel(0x00100981, CS4WCR); /* (SW:1.5 WR:3 HW:1.5), ext. wait */ - - /* CS5a: CAN2 (0xB4000000 - 0xB5FFFFFF) */ - __raw_writel(0x00000200, CS5ABCR); /* no idle cycles, normal space, 8 bit data bus */ - __raw_writel(0x00100981, CS5AWCR); /* (SW:1.5 WR:3 HW:1.5), ext. wait */ - - /* CS5b: CAN3 (0xB6000000 - 0xB7FFFFFF) */ - __raw_writel(0x00000200, CS5BBCR); /* no idle cycles, normal space, 8 bit data bus */ - __raw_writel(0x00100981, CS5BWCR); /* (SW:1.5 WR:3 HW:1.5), ext. wait */ - - /* CS6a: Rotary (0xB8000000 - 0xB9FFFFFF) */ - __raw_writel(0x00000200, CS6ABCR); /* no idle cycles, normal space, 8 bit data bus */ - __raw_writel(0x001009C1, CS6AWCR); /* (SW:1.5 WR:3 HW:1.5), no ext. wait */ - - /* set Pin Select Register A: /PCC_CD1, /PCC_CD2, PCC_BVD1, PCC_BVD2, /IOIS16, IRQ4, IRQ5, USB1d_SUSPEND */ - __raw_writew(0xAABC, PSELA); /* 10 10 10 10 10 11 11 00 */ - - /* set Pin Select Register B: /SCIF0_RTS, /SCIF0_CTS, LCD_VCPWC, LCD_VEPWC, IIC_SDA, IIC_SCL, Reserved */ - __raw_writew(0x3C00, PSELB); /* 0 0 11 11 0 0 00000000 */ - - /* set Pin Select Register C: SIOF1_SCK, SIOF1_RxD, SCIF1_RxD, SCIF1_TxD, Reserved */ - __raw_writew(0x0000, PSELC); /* 00 00 00 00 00000000 */ - - /* set Pin Select Register D: Reserved, SIOF1_TxD, Reserved, SIOF1_MCLK, Reserved, SIOF1_SYNC, Reserved, SCIF1_SCK, Reserved */ - __raw_writew(0x0000, PSELD); /* 0 00 00 00 00 00 00 00 0 */ - - /* OTH: (00) Other fuction - * GPO: (01) General Purpose Output - * GPI: (11) General Purpose Input - * GPI+: (10) General Purpose Input with internal pull-up - *------------------------------------------------------- - * A7 GPO(LED8); A6 GPO(LED7); A5 GPO(LED6); A4 GPO(LED5); - * A3 GPO(LED4); A2 GPO(LED3); A1 GPO(LED2); A0 GPO(LED1); */ - __raw_writew(0x5555, PACR); /* 01 01 01 01 01 01 01 01 */ - - /* B7 GPO(RST4); B6 GPO(RST3); B5 GPO(RST2); B4 GPO(RST1); - * B3 GPO(PB3); B2 GPO(PB2); B1 GPO(PB1); B0 GPO(PB0); */ - __raw_writew(0x5555, PBCR); /* 01 01 01 01 01 01 01 01 */ - - /* C7 GPO(PC7); C6 GPO(PC6); C5 GPO(PC5); C4 GPO(PC4); - * C3 LCD_DATA3; C2 LCD_DATA2; C1 LCD_DATA1; C0 LCD_DATA0; */ - __raw_writew(0x5500, PCCR); /* 01 01 01 01 00 00 00 00 */ - - /* D7 GPO(PD7); D6 GPO(PD6); D5 GPO(PD5); D4 GPO(PD4); - * D3 GPO(PD3); D2 GPO(PD2); D1 GPO(PD1); D0 GPO(PD0); */ - __raw_writew(0x5555, PDCR); /* 01 01 01 01 01 01 01 01 */ - - /* E7 (x); E6 GPI(nu); E5 GPI(nu); E4 LCD_M_DISP; - * E3 LCD_CL1; E2 LCD_CL2; E1 LCD_DON; E0 LCD_FLM; */ - __raw_writew(0x2800, PECR); /* 00 10 10 00 00 00 00 00 */ - - /* F7 (x); F6 DA1(VLCD); F5 DA0(nc); F4 AN3; - * F3 AN2(MID_AD); F2 AN1(EARTH_AD); F1 AN0(TEMP); F0 GPI+(nc); */ - __raw_writew(0x0002, PFCR); /* 00 00 00 00 00 00 00 10 */ - - /* G7 (x); G6 IRQ5(TOUCH_BUSY); G5 IRQ4(TOUCH_IRQ);G4 GPI(KEY2); - * G3 GPI(KEY1); G2 GPO(LED11); G1 GPO(LED10); G0 GPO(LED9); */ - __raw_writew(0x03D5, PGCR); /* 00 00 00 11 11 01 01 01 */ - - /* H7 (x); H6 /RAS(BRAS); H5 /CAS(BCAS); H4 CKE(BCKE); - * H3 GPO(EARTH_OFF); H2 GPO(EARTH_TEST); H1 USB2_PWR; H0 USB1_PWR; */ - __raw_writew(0x0050, PHCR); /* 00 00 00 00 01 01 00 00 */ - - /* J7 (x); J6 AUDCK; J5 ASEBRKAK; J4 AUDATA3; - * J3 AUDATA2; J2 AUDATA1; J1 AUDATA0; J0 AUDSYNC; */ - __raw_writew(0x0000, PJCR); /* 00 00 00 00 00 00 00 00 */ - - /* K7 (x); K6 (x); K5 (x); K4 (x) - * K3 PINT7(/PWR2); K2 PINT6(/PWR1); K1 PINT5(nc); K0 PINT4(FLASH_READY); */ - __raw_writew(0x00FB, PKCR); /* 00 00 00 00 11 11 10 11 */ - - /* L7 TRST; L6 TMS; L5 TDO; L4 TDI; - * L3 TCK; L2 (x); L1 (x); L0 (x); */ - __raw_writew(0x0000, PLCR); /* 00 00 00 00 00 00 00 00 */ - - /* M7 GPO(CURRENT_SINK);M6 GPO(PWR_SWITCH); M5 GPO(LAN_SPEED); M4 GPO(LAN_RESET); - * M3 GPO(BUZZER); M2 GPO(LCD_BL); M1 CS5B(CAN3_CS); M0 GPI+(nc); */ - __raw_writew(0x5552, PMCR); /* 01 01 01 01 01 01 00 10 */ - __raw_writeb(0xF0, PMDR); /* CURRENT_SINK=off, PWR_SWITCH=off, LAN_SPEED=100MBit, LAN_RESET=off, BUZZER=off, LCD_BL=off */ - - /* P7 (x); P6 (x); P5 (x); P4 GPO(on pullup); - * P3 IRQ3(LAN_IRQ); P2 IRQ2(CAN3_IRQ);P1 IRQ1(CAN2_IRQ); P0 IRQ0(CAN1_IRQ); */ - __raw_writew(0x0100, PPCR); /* 00 00 00 01 00 00 00 00 */ - __raw_writeb(0x10, PPDR); /* no current flow through pullup */ - - /* R7 A25; R6 A24; R5 A23; R4 A22; - * R3 A21; R2 A20; R1 A19; R0 A0; */ - __raw_writew(0x0000, PRCR); /* 00 00 00 00 00 00 00 00 */ - - /* S7 (x); S6 (x); S5 (x); S4 GPO(EEPROM_CS2); - * S3 GPO(EEPROM_CS1); S2 SIOF0_TXD; S1 SIOF0_RXD; S0 SIOF0_SCK; */ - __raw_writew(0x0140, PSCR); /* 00 00 00 01 01 00 00 00 */ - - /* T7 (x); T6 (x); T5 (x); T4 COM1_CTS; - * T3 COM1_RTS; T2 COM1_TXD; T1 COM1_RXD; T0 GPO(WDOG); */ - __raw_writew(0x0001, PTCR); /* 00 00 00 00 00 00 00 01 */ - - /* U7 (x); U6 (x); U5 (x); U4 GPI+(/AC_FAULT); - * U3 GPO(TOUCH_CS); U2 TOUCH_TXD; U1 TOUCH_RXD; U0 TOUCH_SCK; */ - __raw_writew(0x0240, PUCR); /* 00 00 00 10 01 00 00 00 */ - - /* V7 (x); V6 (x); V5 (x); V4 GPO(MID2); - * V3 GPO(MID1); V2 CARD_TxD; V1 CARD_RxD; V0 GPI+(/BAT_FAULT); */ - __raw_writew(0x0142, PVCR); /* 00 00 00 01 01 00 00 10 */ - - return 0; -} |