summaryrefslogtreecommitdiff
path: root/board
diff options
context:
space:
mode:
Diffstat (limited to 'board')
-rw-r--r--board/gdsys/common/Makefile1
-rw-r--r--board/gdsys/common/dp501.c107
-rw-r--r--board/gdsys/common/dp501.h30
-rw-r--r--board/gdsys/p1022/Makefile37
-rw-r--r--board/gdsys/p1022/controlcenterd-id.c1224
-rw-r--r--board/gdsys/p1022/controlcenterd-id.h29
-rw-r--r--board/gdsys/p1022/controlcenterd.c425
-rw-r--r--board/gdsys/p1022/ddr.c71
-rw-r--r--board/gdsys/p1022/diu.c87
-rw-r--r--board/gdsys/p1022/law.c20
-rw-r--r--board/gdsys/p1022/sdhc_boot.c63
-rw-r--r--board/gdsys/p1022/tlb.c77
12 files changed, 2171 insertions, 0 deletions
diff --git a/board/gdsys/common/Makefile b/board/gdsys/common/Makefile
index 05dd65df7a..13a9c5dc73 100644
--- a/board/gdsys/common/Makefile
+++ b/board/gdsys/common/Makefile
@@ -33,6 +33,7 @@ COBJS-$(CONFIG_IO) += miiphybb.o
COBJS-$(CONFIG_IO64) += miiphybb.o
COBJS-$(CONFIG_IOCON) += osd.o
COBJS-$(CONFIG_DLVISION_10G) += osd.o
+COBJS-$(CONFIG_CONTROLCENTERD) += dp501.o
COBJS := $(COBJS-y)
SOBJS =
diff --git a/board/gdsys/common/dp501.c b/board/gdsys/common/dp501.c
new file mode 100644
index 0000000000..9aa4e3f4bd
--- /dev/null
+++ b/board/gdsys/common/dp501.c
@@ -0,0 +1,107 @@
+/*
+ * (C) Copyright 2012
+ * Dirk Eibach, Guntermann & Drunck GmbH, dirk.eibach@gdsys.cc
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+/* Parade Technologies Inc. DP501 DisplayPort DVI/HDMI Transmitter */
+
+#include <common.h>
+#include <asm/io.h>
+#include <errno.h>
+#include <i2c.h>
+
+static void dp501_setbits(u8 addr, u8 reg, u8 mask)
+{
+ u8 val;
+
+ val = i2c_reg_read(addr, reg);
+ setbits_8(&val, mask);
+ i2c_reg_write(addr, reg, val);
+}
+
+static void dp501_clrbits(u8 addr, u8 reg, u8 mask)
+{
+ u8 val;
+
+ val = i2c_reg_read(addr, reg);
+ clrbits_8(&val, mask);
+ i2c_reg_write(addr, reg, val);
+}
+
+static int dp501_detect_cable_adapter(u8 addr)
+{
+ u8 val = i2c_reg_read(addr, 0x00);
+
+ return !(val & 0x04);
+}
+
+static void dp501_link_training(u8 addr)
+{
+ u8 val;
+
+ val = i2c_reg_read(addr, 0x51);
+ i2c_reg_write(addr, 0x5d, val); /* set link_bw */
+ val = i2c_reg_read(addr, 0x52);
+ i2c_reg_write(addr, 0x5e, val); /* set lane_cnt */
+ val = i2c_reg_read(addr, 0x53);
+ i2c_reg_write(addr, 0x5c, val); /* set downspread_ctl */
+
+ i2c_reg_write(addr, 0x5f, 0x0d); /* start training */
+}
+
+void dp501_powerup(u8 addr)
+{
+ dp501_clrbits(addr, 0x0a, 0x30); /* power on encoder */
+ i2c_reg_write(addr, 0x27, 0x30); /* Hardware auto detect DVO timing */
+ dp501_setbits(addr, 0x72, 0x80); /* DPCD read enable */
+ dp501_setbits(addr, 0x30, 0x20); /* RS polynomial select */
+ i2c_reg_write(addr, 0x71, 0x20); /* Enable Aux burst write */
+ dp501_setbits(addr, 0x78, 0x30); /* Disable HPD2 IRQ */
+ dp501_clrbits(addr, 0x2f, 0x40); /* Link FIFO reset selection */
+ i2c_reg_write(addr, 0x24, 0xc0); /* SDR mode 0, ext. H/VSYNC */
+ i2c_reg_write(addr + 2, 0x24, 0x02); /* clock input single ended */
+
+ if (dp501_detect_cable_adapter(addr)) {
+ printf("DVI/HDMI cable adapter detected\n");
+ i2c_reg_write(addr, 0x5e, 0x04); /* enable 4 channel */
+ dp501_clrbits(addr, 0x00, 0x08); /* DVI/HDMI HDCP operation */
+ } else {
+ printf("no DVI/HDMI cable adapter detected\n");
+ i2c_reg_write(addr + 2, 0x00, 0x18); /* driving strength */
+ i2c_reg_write(addr + 2, 0x03, 0x06); /* driving strength */
+ i2c_reg_write(addr, 0x2c, 0x00); /* configure N value */
+ i2c_reg_write(addr, 0x2d, 0x00); /* configure N value */
+ i2c_reg_write(addr, 0x2e, 0x0c); /* configure N value */
+ i2c_reg_write(addr, 0x76, 0xff); /* clear all interrupt */
+ dp501_setbits(addr, 0x78, 0x03); /* clear all interrupt */
+ i2c_reg_write(addr, 0x75, 0xf8); /* aux channel reset */
+ i2c_reg_write(addr, 0x75, 0x00); /* clear aux channel reset */
+ i2c_reg_write(addr, 0x87, 0x70); /* set retry counter as 7 */
+ dp501_setbits(addr, 0x00, 0x08); /* for DP HDCP operation */
+
+ dp501_link_training(addr);
+ }
+}
+
+void dp501_powerdown(u8 addr)
+{
+ dp501_setbits(addr, 0x0a, 0x30); /* power down encoder, standby mode */
+}
diff --git a/board/gdsys/common/dp501.h b/board/gdsys/common/dp501.h
new file mode 100644
index 0000000000..8dc3215dcf
--- /dev/null
+++ b/board/gdsys/common/dp501.h
@@ -0,0 +1,30 @@
+/*
+ * (C) Copyright 2012
+ * Dirk Eibach, Guntermann & Drunck GmbH, dirk.eibach@gdsys.cc
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef _DP501_H_
+#define _DP501_H_
+
+void dp501_powerup(u8 addr);
+void dp501_powerdown(u8 addr);
+
+#endif
diff --git a/board/gdsys/p1022/Makefile b/board/gdsys/p1022/Makefile
new file mode 100644
index 0000000000..17f602f7ef
--- /dev/null
+++ b/board/gdsys/p1022/Makefile
@@ -0,0 +1,37 @@
+#
+# Copyright 2010 Freescale Semiconductor, Inc.
+#
+# This program is free software; you can redistribute it and/or modify it
+# under the terms of the GNU General Public License as published by the Free
+# Software Foundation; either version 2 of the License, or (at your option)
+# any later version.
+#
+
+include $(TOPDIR)/config.mk
+
+LIB = $(obj)lib$(BOARD).o
+
+# COBJS-y += $(BOARD).o
+COBJS-y += law.o
+COBJS-y += ddr.o
+COBJS-y += tlb.o
+COBJS-y += sdhc_boot.o
+COBJS-$(CONFIG_CONTROLCENTERD) += controlcenterd.o controlcenterd-id.o
+
+COBJS-$(CONFIG_FSL_DIU_FB) += diu.o
+
+SRCS := $(SOBJS:.o=.S) $(COBJS-y:.o=.c)
+OBJS := $(addprefix $(obj),$(COBJS-y))
+SOBJS := $(addprefix $(obj),$(SOBJS))
+
+$(LIB): $(OBJS) $(SOBJS)
+ $(call cmd_link_o_target, $(OBJS))
+
+#########################################################################
+
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
+
+sinclude $(obj).depend
+
+#########################################################################
diff --git a/board/gdsys/p1022/controlcenterd-id.c b/board/gdsys/p1022/controlcenterd-id.c
new file mode 100644
index 0000000000..3fca3c53b2
--- /dev/null
+++ b/board/gdsys/p1022/controlcenterd-id.c
@@ -0,0 +1,1224 @@
+/*
+ * (C) Copyright 2013
+ * Reinhard Pfau, Guntermann & Drunck GmbH, reinhard.pfau@gdsys.cc
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the Free
+ * Software Foundation; either version 2 of the License, or (at your option)
+ * any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
+ * MA 02110-1301, USA.
+ */
+
+/* TODO: some more #ifdef's to avoid unneeded code for stage 1 / stage 2 */
+
+#ifdef CCDM_ID_DEBUG
+#define DEBUG
+#endif
+
+#include <common.h>
+#include <malloc.h>
+#include <fs.h>
+#include <i2c.h>
+#include <mmc.h>
+#include <tpm.h>
+#include <sha1.h>
+#include <asm/byteorder.h>
+#include <asm/unaligned.h>
+#include <pca9698.h>
+
+#undef CCDM_FIRST_STAGE
+#undef CCDM_SECOND_STAGE
+#undef CCDM_AUTO_FIRST_STAGE
+
+#ifdef CONFIG_DEVELOP
+#define CCDM_DEVELOP
+#endif
+
+#ifdef CONFIG_TRAILBLAZER
+#define CCDM_FIRST_STAGE
+#undef CCDM_SECOND_STAGE
+#else
+#undef CCDM_FIRST_STAGE
+#define CCDM_SECOND_STAGE
+#endif
+
+#if defined(CCDM_DEVELOP) && defined(CCDM_SECOND_STAGE) && \
+ !defined(CCCM_FIRST_STAGE)
+#define CCDM_AUTO_FIRST_STAGE
+#endif
+
+/* enums from TCG specs */
+enum {
+ /* capability areas */
+ TPM_CAP_NV_INDEX = 0x00000011,
+ TPM_CAP_HANDLE = 0x00000014,
+ /* resource types */
+ TPM_RT_KEY = 0x00000001,
+};
+
+/* CCDM specific contants */
+enum {
+ /* NV indices */
+ NV_COMMON_DATA_INDEX = 0x40000001,
+ /* magics for key blob chains */
+ MAGIC_KEY_PROGRAM = 0x68726500,
+ MAGIC_HMAC = 0x68616300,
+ MAGIC_END_OF_CHAIN = 0x00000000,
+ /* sizes */
+ NV_COMMON_DATA_MIN_SIZE = 3 * sizeof(uint64_t) + 2 * sizeof(uint16_t),
+};
+
+/* other constants */
+enum {
+ ESDHC_BOOT_IMAGE_SIG_OFS = 0x40,
+ ESDHC_BOOT_IMAGE_SIZE_OFS = 0x48,
+ ESDHC_BOOT_IMAGE_ADDR_OFS = 0x50,
+ ESDHC_BOOT_IMAGE_TARGET_OFS = 0x58,
+ ESDHC_BOOT_IMAGE_ENTRY_OFS = 0x60,
+};
+
+struct key_program {
+ uint32_t magic;
+ uint32_t code_crc;
+ uint32_t code_size;
+ uint8_t code[];
+};
+
+struct h_reg {
+ bool valid;
+ uint8_t digest[20];
+};
+
+
+enum access_mode {
+ HREG_NONE = 0,
+ HREG_RD = 1,
+ HREG_WR = 2,
+ HREG_RDWR = 3,
+};
+
+/* register constants */
+enum {
+ FIX_HREG_DEVICE_ID_HASH = 0,
+ FIX_HREG_SELF_HASH = 1,
+ FIX_HREG_STAGE2_HASH = 2,
+ FIX_HREG_VENDOR = 3,
+ COUNT_FIX_HREGS
+};
+
+
+/* hre opcodes */
+enum {
+ /* opcodes w/o data */
+ HRE_NOP = 0x00,
+ HRE_SYNC = HRE_NOP,
+ HRE_CHECK0 = 0x01,
+ /* opcodes w/o data, w/ sync dst */
+ /* opcodes w/ data */
+ HRE_LOAD = 0x81,
+ /* opcodes w/data, w/sync dst */
+ HRE_XOR = 0xC1,
+ HRE_AND = 0xC2,
+ HRE_OR = 0xC3,
+ HRE_EXTEND = 0xC4,
+ HRE_LOADKEY = 0xC5,
+};
+
+/* hre errors */
+enum {
+ HRE_E_OK = 0,
+ HRE_E_TPM_FAILURE,
+ HRE_E_INVALID_HREG,
+};
+
+static uint64_t device_id;
+static uint64_t device_cl;
+static uint64_t device_type;
+
+static uint32_t platform_key_handle;
+
+static void(*bl2_entry)(void);
+
+static struct h_reg pcr_hregs[24];
+static struct h_reg fix_hregs[COUNT_FIX_HREGS];
+static struct h_reg var_hregs[8];
+static uint32_t hre_tpm_err;
+static int hre_err = HRE_E_OK;
+
+#define IS_PCR_HREG(spec) ((spec) & 0x20)
+#define IS_FIX_HREG(spec) (((spec) & 0x38) == 0x08)
+#define IS_VAR_HREG(spec) (((spec) & 0x38) == 0x10)
+#define HREG_IDX(spec) ((spec) & (IS_PCR_HREG(spec) ? 0x1f : 0x7))
+
+
+static const uint8_t prg_stage1_prepare[] = {
+ 0x00, 0x20, 0x00, 0x00, /* opcode: SYNC f0 */
+ 0x00, 0x24, 0x00, 0x00, /* opcode: SYNC f1 */
+ 0x01, 0x80, 0x00, 0x00, /* opcode: CHECK0 PCR0 */
+ 0x81, 0x22, 0x00, 0x00, /* opcode: LOAD PCR0, f0 */
+ 0x01, 0x84, 0x00, 0x00, /* opcode: CHECK0 PCR1 */
+ 0x81, 0x26, 0x10, 0x00, /* opcode: LOAD PCR1, f1 */
+ 0x01, 0x88, 0x00, 0x00, /* opcode: CHECK0 PCR2 */
+ 0x81, 0x2a, 0x20, 0x00, /* opcode: LOAD PCR2, f2 */
+ 0x01, 0x8c, 0x00, 0x00, /* opcode: CHECK0 PCR3 */
+ 0x81, 0x2e, 0x30, 0x00, /* opcode: LOAD PCR3, f3 */
+};
+
+static const uint8_t prg_stage2_prepare[] = {
+ 0x00, 0x80, 0x00, 0x00, /* opcode: SYNC PCR0 */
+ 0x00, 0x84, 0x00, 0x00, /* opcode: SYNC PCR1 */
+ 0x00, 0x88, 0x00, 0x00, /* opcode: SYNC PCR2 */
+ 0x00, 0x8c, 0x00, 0x00, /* opcode: SYNC PCR3 */
+ 0x00, 0x90, 0x00, 0x00, /* opcode: SYNC PCR4 */
+};
+
+static const uint8_t prg_stage2_success[] = {
+ 0x81, 0x02, 0x40, 0x14, /* opcode: LOAD PCR4, #<20B data> */
+ 0x48, 0xfd, 0x95, 0x17, 0xe7, 0x54, 0x6b, 0x68, /* data */
+ 0x92, 0x31, 0x18, 0x05, 0xf8, 0x58, 0x58, 0x3c, /* data */
+ 0xe4, 0xd2, 0x81, 0xe0, /* data */
+};
+
+static const uint8_t prg_stage_fail[] = {
+ 0x81, 0x01, 0x00, 0x14, /* opcode: LOAD v0, #<20B data> */
+ 0xc0, 0x32, 0xad, 0xc1, 0xff, 0x62, 0x9c, 0x9b, /* data */
+ 0x66, 0xf2, 0x27, 0x49, 0xad, 0x66, 0x7e, 0x6b, /* data */
+ 0xea, 0xdf, 0x14, 0x4b, /* data */
+ 0x81, 0x42, 0x30, 0x00, /* opcode: LOAD PCR3, v0 */
+ 0x81, 0x42, 0x40, 0x00, /* opcode: LOAD PCR4, v0 */
+};
+
+static const uint8_t vendor[] = "Guntermann & Drunck";
+
+
+/**
+ * @brief read a bunch of data from MMC into memory.
+ *
+ * @param mmc pointer to the mmc structure to use.
+ * @param src offset where the data starts on MMC/SD device (in bytes).
+ * @param dst pointer to the location where the read data should be stored.
+ * @param size number of bytes to read from the MMC/SD device.
+ * @return number of bytes read or -1 on error.
+ */
+static int ccdm_mmc_read(struct mmc *mmc, u64 src, u8 *dst, int size)
+{
+ int result = 0;
+ u32 blk_len, ofs;
+ ulong block_no, n, cnt;
+ u8 *tmp_buf = NULL;
+
+ if (size <= 0)
+ goto end;
+
+ blk_len = mmc->read_bl_len;
+ tmp_buf = malloc(blk_len);
+ if (!tmp_buf)
+ goto failure;
+ block_no = src / blk_len;
+ ofs = src % blk_len;
+
+ if (ofs) {
+ n = mmc->block_dev.block_read(mmc->block_dev.dev, block_no++, 1,
+ tmp_buf);
+ if (!n)
+ goto failure;
+ result = min(size, blk_len - ofs);
+ memcpy(dst, tmp_buf + ofs, result);
+ dst += result;
+ size -= result;
+ }
+ cnt = size / blk_len;
+ if (cnt) {
+ n = mmc->block_dev.block_read(mmc->block_dev.dev, block_no, cnt,
+ dst);
+ if (n != cnt)
+ goto failure;
+ size -= cnt * blk_len;
+ result += cnt * blk_len;
+ dst += cnt * blk_len;
+ block_no += cnt;
+ }
+ if (size) {
+ n = mmc->block_dev.block_read(mmc->block_dev.dev, block_no++, 1,
+ tmp_buf);
+ if (!n)
+ goto failure;
+ memcpy(dst, tmp_buf, size);
+ result += size;
+ }
+ goto end;
+failure:
+ result = -1;
+end:
+ if (tmp_buf)
+ free(tmp_buf);
+ return result;
+}
+
+/**
+ * @brief returns a location where the 2nd stage bootloader can be(/ is) placed.
+ *
+ * @return pointer to the location for/of the 2nd stage bootloader
+ */
+static u8 *get_2nd_stage_bl_location(ulong target_addr)
+{
+ ulong addr;
+#ifdef CCDM_SECOND_STAGE
+ addr = getenv_ulong("loadaddr", 16, CONFIG_LOADADDR);
+#else
+ addr = target_addr;
+#endif
+ return (u8 *)(addr);
+}
+
+
+#ifdef CCDM_SECOND_STAGE
+/**
+ * @brief returns a location where the image can be(/ is) placed.
+ *
+ * @return pointer to the location for/of the image
+ */
+static u8 *get_image_location(void)
+{
+ ulong addr;
+ /* TODO use other area? */
+ addr = getenv_ulong("loadaddr", 16, CONFIG_LOADADDR);
+ return (u8 *)(addr);
+}
+#endif
+
+/**
+ * @brief get the size of a given (TPM) NV area
+ * @param index NV index of the area to get size for
+ * @param size pointer to the size
+ * @return 0 on success, != 0 on error
+ */
+static int get_tpm_nv_size(uint32_t index, uint32_t *size)
+{
+ uint32_t err;
+ uint8_t info[72];
+ uint8_t *ptr;
+ uint16_t v16;
+
+ err = tpm_get_capability(TPM_CAP_NV_INDEX, index,
+ info, sizeof(info));
+ if (err) {
+ printf("tpm_get_capability(CAP_NV_INDEX, %08x) failed: %u\n",
+ index, err);
+ return 1;
+ }
+
+ /* skip tag and nvIndex */
+ ptr = info + 6;
+ /* skip 2 pcr info fields */
+ v16 = get_unaligned_be16(ptr);
+ ptr += 2 + v16 + 1 + 20;
+ v16 = get_unaligned_be16(ptr);
+ ptr += 2 + v16 + 1 + 20;
+ /* skip permission and flags */
+ ptr += 6 + 3;
+
+ *size = get_unaligned_be32(ptr);
+ return 0;
+}
+
+/**
+ * @brief search for a key by usage auth and pub key hash.
+ * @param auth usage auth of the key to search for
+ * @param pubkey_digest (SHA1) hash of the pub key structure of the key
+ * @param[out] handle the handle of the key iff found
+ * @return 0 if key was found in TPM; != 0 if not.
+ */
+static int find_key(const uint8_t auth[20], const uint8_t pubkey_digest[20],
+ uint32_t *handle)
+{
+ uint16_t key_count;
+ uint32_t key_handles[10];
+ uint8_t buf[288];
+ uint8_t *ptr;
+ uint32_t err;
+ uint8_t digest[20];
+ size_t buf_len;
+ unsigned int i;
+
+ /* fetch list of already loaded keys in the TPM */
+ err = tpm_get_capability(TPM_CAP_HANDLE, TPM_RT_KEY, buf, sizeof(buf));
+ if (err)
+ return -1;
+ key_count = get_unaligned_be16(buf);
+ ptr = buf + 2;
+ for (i = 0; i < key_count; ++i, ptr += 4)
+ key_handles[i] = get_unaligned_be32(ptr);
+
+ /* now search a(/ the) key which we can access with the given auth */
+ for (i = 0; i < key_count; ++i) {
+ buf_len = sizeof(buf);
+ err = tpm_get_pub_key_oiap(key_handles[i], auth, buf, &buf_len);
+ if (err && err != TPM_AUTHFAIL)
+ return -1;
+ if (err)
+ continue;
+ sha1_csum(buf, buf_len, digest);
+ if (!memcmp(digest, pubkey_digest, 20)) {
+ *handle = key_handles[i];
+ return 0;
+ }
+ }
+ return 1;
+}
+
+/**
+ * @brief read CCDM common data from TPM NV
+ * @return 0 if CCDM common data was found and read, !=0 if something failed.
+ */
+static int read_common_data(void)
+{
+ uint32_t size;
+ uint32_t err;
+ uint8_t buf[256];
+ sha1_context ctx;
+
+ if (get_tpm_nv_size(NV_COMMON_DATA_INDEX, &size) ||
+ size < NV_COMMON_DATA_MIN_SIZE)
+ return 1;
+ err = tpm_nv_read_value(NV_COMMON_DATA_INDEX,
+ buf, min(sizeof(buf), size));
+ if (err) {
+ printf("tpm_nv_read_value() failed: %u\n", err);
+ return 1;
+ }
+
+ device_id = get_unaligned_be64(buf);
+ device_cl = get_unaligned_be64(buf + 8);
+ device_type = get_unaligned_be64(buf + 16);
+
+ sha1_starts(&ctx);
+ sha1_update(&ctx, buf, 24);
+ sha1_finish(&ctx, fix_hregs[FIX_HREG_DEVICE_ID_HASH].digest);
+ fix_hregs[FIX_HREG_DEVICE_ID_HASH].valid = true;
+
+ platform_key_handle = get_unaligned_be32(buf + 24);
+
+ return 0;
+}
+
+/**
+ * @brief compute hash of bootloader itself.
+ * @param[out] dst hash register where the hash should be stored
+ * @return 0 on success, != 0 on failure.
+ *
+ * @note MUST be called at a time where the boot loader is accessible at the
+ * configured location (; so take care when code is reallocated).
+ */
+static int compute_self_hash(struct h_reg *dst)
+{
+ sha1_csum((const uint8_t *)CONFIG_SYS_MONITOR_BASE,
+ CONFIG_SYS_MONITOR_LEN, dst->digest);
+ dst->valid = true;
+ return 0;
+}
+
+int ccdm_compute_self_hash(void)
+{
+ if (!fix_hregs[FIX_HREG_SELF_HASH].valid)
+ compute_self_hash(&fix_hregs[FIX_HREG_SELF_HASH]);
+ return 0;
+}
+
+/**
+ * @brief compute the hash of the 2nd stage boot loader (on SD card)
+ * @param[out] dst hash register to store the computed hash
+ * @return 0 on success, != 0 on failure
+ *
+ * Determines the size and location of the 2nd stage boot loader on SD card,
+ * loads the 2nd stage boot loader and computes the (SHA1) hash value.
+ * Within the 1st stage boot loader, the 2nd stage boot loader is loaded at
+ * the desired memory location and the variable @a bl2_entry is set.
+ *
+ * @note This sets the variable @a bl2_entry to the entry point when the
+ * 2nd stage boot loader is loaded at its configured memory location.
+ */
+static int compute_second_stage_hash(struct h_reg *dst)
+{
+ int result = 0;
+ u32 code_len, code_offset, target_addr, exec_entry;
+ struct mmc *mmc;
+ u8 *load_addr = NULL;
+ u8 buf[128];
+
+ mmc = find_mmc_device(0);
+ if (!mmc)
+ goto failure;
+ mmc_init(mmc);
+
+ if (ccdm_mmc_read(mmc, 0, buf, sizeof(buf)) < 0)
+ goto failure;
+
+ code_offset = *(u32 *)(buf + ESDHC_BOOT_IMAGE_ADDR_OFS);
+ code_len = *(u32 *)(buf + ESDHC_BOOT_IMAGE_SIZE_OFS);
+ target_addr = *(u32 *)(buf + ESDHC_BOOT_IMAGE_TARGET_OFS);
+ exec_entry = *(u32 *)(buf + ESDHC_BOOT_IMAGE_ENTRY_OFS);
+
+ load_addr = get_2nd_stage_bl_location(target_addr);
+ if (load_addr == (u8 *)target_addr)
+ bl2_entry = (void(*)(void))exec_entry;
+
+ if (ccdm_mmc_read(mmc, code_offset, load_addr, code_len) < 0)
+ goto failure;
+
+ sha1_csum(load_addr, code_len, dst->digest);
+ dst->valid = true;
+
+ goto end;
+failure:
+ result = 1;
+ bl2_entry = NULL;
+end:
+ return result;
+}
+
+/**
+ * @brief get pointer to hash register by specification
+ * @param spec specification of a hash register
+ * @return pointer to hash register or NULL if @a spec does not qualify a
+ * valid hash register; NULL else.
+ */
+static struct h_reg *get_hreg(uint8_t spec)
+{
+ uint8_t idx;
+
+ idx = HREG_IDX(spec);
+ if (IS_FIX_HREG(spec)) {
+ if (idx < ARRAY_SIZE(fix_hregs))
+ return fix_hregs + idx;
+ hre_err = HRE_E_INVALID_HREG;
+ } else if (IS_PCR_HREG(spec)) {
+ if (idx < ARRAY_SIZE(pcr_hregs))
+ return pcr_hregs + idx;
+ hre_err = HRE_E_INVALID_HREG;
+ } else if (IS_VAR_HREG(spec)) {
+ if (idx < ARRAY_SIZE(var_hregs))
+ return var_hregs + idx;
+ hre_err = HRE_E_INVALID_HREG;
+ }
+ return NULL;
+}
+
+/**
+ * @brief get pointer of a hash register by specification and usage.
+ * @param spec specification of a hash register
+ * @param mode access mode (read or write or read/write)
+ * @return pointer to hash register if found and valid; NULL else.
+ *
+ * This func uses @a get_reg() to determine the hash register for a given spec.
+ * If a register is found it is validated according to the desired access mode.
+ * The value of automatic registers (PCR register and fixed registers) is
+ * loaded or computed on read access.
+ */
+static struct h_reg *access_hreg(uint8_t spec, enum access_mode mode)
+{
+ struct h_reg *result;
+
+ result = get_hreg(spec);
+ if (!result)
+ return NULL;
+
+ if (mode & HREG_WR) {
+ if (IS_FIX_HREG(spec)) {
+ hre_err = HRE_E_INVALID_HREG;
+ return NULL;
+ }
+ }
+ if (mode & HREG_RD) {
+ if (!result->valid) {
+ if (IS_PCR_HREG(spec)) {
+ hre_tpm_err = tpm_pcr_read(HREG_IDX(spec),
+ result->digest, 20);
+ result->valid = (hre_tpm_err == TPM_SUCCESS);
+ } else if (IS_FIX_HREG(spec)) {
+ switch (HREG_IDX(spec)) {
+ case FIX_HREG_DEVICE_ID_HASH:
+ read_common_data();
+ break;
+ case FIX_HREG_SELF_HASH:
+ ccdm_compute_self_hash();
+ break;
+ case FIX_HREG_STAGE2_HASH:
+ compute_second_stage_hash(result);
+ break;
+ case FIX_HREG_VENDOR:
+ memcpy(result->digest, vendor, 20);
+ result->valid = true;
+ break;
+ }
+ } else {
+ result->valid = true;
+ }
+ }
+ if (!result->valid) {
+ hre_err = HRE_E_INVALID_HREG;
+ return NULL;
+ }
+ }
+
+ return result;
+}
+
+static void *compute_and(void *_dst, const void *_src, size_t n)
+{
+ uint8_t *dst = _dst;
+ const uint8_t *src = _src;
+ size_t i;
+
+ for (i = n; i-- > 0; )
+ *dst++ &= *src++;
+
+ return _dst;
+}
+
+static void *compute_or(void *_dst, const void *_src, size_t n)
+{
+ uint8_t *dst = _dst;
+ const uint8_t *src = _src;
+ size_t i;
+
+ for (i = n; i-- > 0; )
+ *dst++ |= *src++;
+
+ return _dst;
+}
+
+static void *compute_xor(void *_dst, const void *_src, size_t n)
+{
+ uint8_t *dst = _dst;
+ const uint8_t *src = _src;
+ size_t i;
+
+ for (i = n; i-- > 0; )
+ *dst++ ^= *src++;
+
+ return _dst;
+}
+
+static void *compute_extend(void *_dst, const void *_src, size_t n)
+{
+ uint8_t digest[20];
+ sha1_context ctx;
+
+ sha1_starts(&ctx);
+ sha1_update(&ctx, _dst, n);
+ sha1_update(&ctx, _src, n);
+ sha1_finish(&ctx, digest);
+ memcpy(_dst, digest, min(n, sizeof(digest)));
+
+ return _dst;
+}
+
+static int hre_op_loadkey(struct h_reg *src_reg, struct h_reg *dst_reg,
+ const void *key, size_t key_size)
+{
+ uint32_t parent_handle;
+ uint32_t key_handle;
+
+ if (!src_reg || !dst_reg || !src_reg->valid || !dst_reg->valid)
+ return -1;
+ if (find_key(src_reg->digest, dst_reg->digest, &parent_handle))
+ return -1;
+ hre_tpm_err = tpm_load_key2_oiap(parent_handle, key, key_size,
+ src_reg->digest, &key_handle);
+ if (hre_tpm_err) {
+ hre_err = HRE_E_TPM_FAILURE;
+ return -1;
+ }
+ /* TODO remember key handle somehow? */
+
+ return 0;
+}
+
+/**
+ * @brief executes the next opcode on the hash register engine.
+ * @param[in,out] ip pointer to the opcode (instruction pointer)
+ * @param[in,out] code_size (remaining) size of the code
+ * @return new instruction pointer on success, NULL on error.
+ */
+static const uint8_t *hre_execute_op(const uint8_t **ip, size_t *code_size)
+{
+ bool dst_modified = false;
+ uint32_t ins;
+ uint8_t opcode;
+ uint8_t src_spec;
+ uint8_t dst_spec;
+ uint16_t data_size;
+ struct h_reg *src_reg, *dst_reg;
+ uint8_t buf[20];
+ const uint8_t *src_buf, *data;
+ uint8_t *ptr;
+ int i;
+ void * (*bin_func)(void *, const void *, size_t);
+
+ if (*code_size < 4)
+ return NULL;
+
+ ins = get_unaligned_be32(*ip);
+ opcode = **ip;
+ data = *ip + 4;
+ src_spec = (ins >> 18) & 0x3f;
+ dst_spec = (ins >> 12) & 0x3f;
+ data_size = (ins & 0x7ff);
+
+ debug("HRE: ins=%08x (op=%02x, s=%02x, d=%02x, L=%d)\n", ins,
+ opcode, src_spec, dst_spec, data_size);
+
+ if ((opcode & 0x80) && (data_size + 4) > *code_size)
+ return NULL;
+
+ src_reg = access_hreg(src_spec, HREG_RD);
+ if (hre_err || hre_tpm_err)
+ return NULL;
+ dst_reg = access_hreg(dst_spec, (opcode & 0x40) ? HREG_RDWR : HREG_WR);
+ if (hre_err || hre_tpm_err)
+ return NULL;
+
+ switch (opcode) {
+ case HRE_NOP:
+ goto end;
+ case HRE_CHECK0:
+ if (src_reg) {
+ for (i = 0; i < 20; ++i) {
+ if (src_reg->digest[i])
+ return NULL;
+ }
+ }
+ break;
+ case HRE_LOAD:
+ bin_func = memcpy;
+ goto do_bin_func;
+ case HRE_XOR:
+ bin_func = compute_xor;
+ goto do_bin_func;
+ case HRE_AND:
+ bin_func = compute_and;
+ goto do_bin_func;
+ case HRE_OR:
+ bin_func = compute_or;
+ goto do_bin_func;
+ case HRE_EXTEND:
+ bin_func = compute_extend;
+do_bin_func:
+ if (!dst_reg)
+ return NULL;
+ if (src_reg) {
+ src_buf = src_reg->digest;
+ } else {
+ if (!data_size) {
+ memset(buf, 0, 20);
+ src_buf = buf;
+ } else if (data_size == 1) {
+ memset(buf, *data, 20);
+ src_buf = buf;
+ } else if (data_size >= 20) {
+ src_buf = data;
+ } else {
+ src_buf = buf;
+ for (ptr = (uint8_t *)src_buf, i = 20; i > 0;
+ i -= data_size, ptr += data_size)
+ memcpy(ptr, data, min(i, data_size));
+ }
+ }
+ bin_func(dst_reg->digest, src_buf, 20);
+ dst_reg->valid = true;
+ dst_modified = true;
+ break;
+ case HRE_LOADKEY:
+ if (hre_op_loadkey(src_reg, dst_reg, data, data_size))
+ return NULL;
+ break;
+ default:
+ return NULL;
+ }
+
+ if (dst_reg && dst_modified && IS_PCR_HREG(dst_spec)) {
+ hre_tpm_err = tpm_extend(HREG_IDX(dst_spec), dst_reg->digest,
+ dst_reg->digest);
+ if (hre_tpm_err) {
+ hre_err = HRE_E_TPM_FAILURE;
+ return NULL;
+ }
+ }
+end:
+ *ip += 4;
+ *code_size -= 4;
+ if (opcode & 0x80) {
+ *ip += data_size;
+ *code_size -= data_size;
+ }
+
+ return *ip;
+}
+
+/**
+ * @brief runs a program on the hash register engine.
+ * @param code pointer to the (HRE) code.
+ * @param code_size size of the code (in bytes).
+ * @return 0 on success, != 0 on failure.
+ */
+static int hre_run_program(const uint8_t *code, size_t code_size)
+{
+ size_t code_left;
+ const uint8_t *ip = code;
+
+ code_left = code_size;
+ hre_tpm_err = 0;
+ hre_err = HRE_E_OK;
+ while (code_left > 0)
+ if (!hre_execute_op(&ip, &code_left))
+ return -1;
+
+ return hre_err;
+}
+
+static int check_hmac(struct key_program *hmac,
+ const uint8_t *data, size_t data_size)
+{
+ uint8_t key[20], computed_hmac[20];
+ uint32_t type;
+
+ type = get_unaligned_be32(hmac->code);
+ if (type != 0)
+ return 1;
+ memset(key, 0, sizeof(key));
+ compute_extend(key, pcr_hregs[1].digest, 20);
+ compute_extend(key, pcr_hregs[2].digest, 20);
+ compute_extend(key, pcr_hregs[3].digest, 20);
+ compute_extend(key, pcr_hregs[4].digest, 20);
+
+ sha1_hmac(key, sizeof(key), data, data_size, computed_hmac);
+
+ return memcmp(computed_hmac, hmac->code + 4, 20);
+}
+
+static int verify_program(struct key_program *prg)
+{
+ uint32_t crc;
+ crc = crc32(0, prg->code, prg->code_size);
+
+ if (crc != prg->code_crc) {
+ printf("HRC crc mismatch: %08x != %08x\n",
+ crc, prg->code_crc);
+ return 1;
+ }
+ return 0;
+}
+
+#if defined(CCDM_FIRST_STAGE) || (defined CCDM_AUTO_FIRST_STAGE)
+static struct key_program *load_sd_key_program(void)
+{
+ u32 code_len, code_offset;
+ struct mmc *mmc;
+ u8 buf[128];
+ struct key_program *result = NULL, *hmac = NULL;
+ struct key_program header;
+
+ mmc = find_mmc_device(0);
+ if (!mmc)
+ return NULL;
+ mmc_init(mmc);
+
+ if (ccdm_mmc_read(mmc, 0, buf, sizeof(buf)) <= 0)
+ goto failure;
+
+ code_offset = *(u32 *)(buf + ESDHC_BOOT_IMAGE_ADDR_OFS);
+ code_len = *(u32 *)(buf + ESDHC_BOOT_IMAGE_SIZE_OFS);
+
+ code_offset += code_len;
+ /* TODO: the following needs to be the size of the 2nd stage env */
+ code_offset += CONFIG_ENV_SIZE;
+
+ if (ccdm_mmc_read(mmc, code_offset, buf, 4*3) < 0)
+ goto failure;
+
+ header.magic = get_unaligned_be32(buf);
+ header.code_crc = get_unaligned_be32(buf + 4);
+ header.code_size = get_unaligned_be32(buf + 8);
+
+ if (header.magic != MAGIC_KEY_PROGRAM)
+ goto failure;
+
+ result = malloc(sizeof(struct key_program) + header.code_size);
+ if (!result)
+ goto failure;
+ *result = header;
+
+ printf("load key program chunk from SD card (%u bytes) ",
+ header.code_size);
+ code_offset += 12;
+ if (ccdm_mmc_read(mmc, code_offset, result->code, header.code_size)
+ < 0)
+ goto failure;
+ code_offset += header.code_size;
+ puts("\n");
+
+ if (verify_program(result))
+ goto failure;
+
+ if (ccdm_mmc_read(mmc, code_offset, buf, 4*3) < 0)
+ goto failure;
+
+ header.magic = get_unaligned_be32(buf);
+ header.code_crc = get_unaligned_be32(buf + 4);
+ header.code_size = get_unaligned_be32(buf + 8);
+
+ if (header.magic == MAGIC_HMAC) {
+ puts("check integrity\n");
+ hmac = malloc(sizeof(struct key_program) + header.code_size);
+ if (!hmac)
+ goto failure;
+ *hmac = header;
+ code_offset += 12;
+ if (ccdm_mmc_read(mmc, code_offset, hmac->code,
+ hmac->code_size) < 0)
+ goto failure;
+ if (verify_program(hmac))
+ goto failure;
+ if (check_hmac(hmac, result->code, result->code_size)) {
+ puts("key program integrity could not be verified\n");
+ goto failure;
+ }
+ puts("key program verified\n");
+ }
+
+ goto end;
+failure:
+ if (result)
+ free(result);
+ result = NULL;
+end:
+ if (hmac)
+ free(hmac);
+
+ return result;
+}
+#endif
+
+#ifdef CCDM_SECOND_STAGE
+/**
+ * @brief load a key program from file system.
+ * @param ifname interface of the file system
+ * @param dev_part_str device part of the file system
+ * @param fs_type tyep of the file system
+ * @param path path of the file to load.
+ * @return the loaded structure or NULL on failure.
+ */
+static struct key_program *load_key_chunk(const char *ifname,
+ const char *dev_part_str, int fs_type,
+ const char *path)
+{
+ struct key_program *result = NULL;
+ struct key_program header;
+ uint32_t crc;
+ uint8_t buf[12];
+ int i;
+
+ if (fs_set_blk_dev(ifname, dev_part_str, fs_type))
+ goto failure;
+ i = fs_read(path, (ulong)buf, 0, 12);
+ if (i < 12)
+ goto failure;
+ header.magic = get_unaligned_be32(buf);
+ header.code_crc = get_unaligned_be32(buf + 4);
+ header.code_size = get_unaligned_be32(buf + 8);
+
+ if (header.magic != MAGIC_HMAC && header.magic != MAGIC_KEY_PROGRAM)
+ goto failure;
+
+ result = malloc(sizeof(struct key_program) + header.code_size);
+ if (!result)
+ goto failure;
+ if (fs_set_blk_dev(ifname, dev_part_str, fs_type))
+ goto failure;
+ i = fs_read(path, (ulong)result, 0,
+ sizeof(struct key_program) + header.code_size);
+ if (i <= 0)
+ goto failure;
+ *result = header;
+
+ crc = crc32(0, result->code, result->code_size);
+
+ if (crc != result->code_crc) {
+ printf("%s: HRC crc mismatch: %08x != %08x\n",
+ path, crc, result->code_crc);
+ goto failure;
+ }
+ goto end;
+failure:
+ if (result) {
+ free(result);
+ result = NULL;
+ }
+end:
+ return result;
+}
+#endif
+
+#if defined(CCDM_FIRST_STAGE) || (defined CCDM_AUTO_FIRST_STAGE)
+static int first_stage_actions(void)
+{
+ int result = 0;
+ struct key_program *sd_prg = NULL;
+
+ puts("CCDM S1: start actions\n");
+#ifndef CCDM_SECOND_STAGE
+ if (tpm_continue_self_test())
+ goto failure;
+#else
+ tpm_continue_self_test();
+#endif
+ mdelay(37);
+
+ if (hre_run_program(prg_stage1_prepare, sizeof(prg_stage1_prepare)))
+ goto failure;
+
+ sd_prg = load_sd_key_program();
+ if (sd_prg) {
+ if (hre_run_program(sd_prg->code, sd_prg->code_size))
+ goto failure;
+ puts("SD code run successfully\n");
+ } else {
+ puts("no key program found on SD\n");
+ goto failure;
+ }
+ goto end;
+failure:
+ result = 1;
+end:
+ if (sd_prg)
+ free(sd_prg);
+ printf("CCDM S1: actions done (%d)\n", result);
+ return result;
+}
+#endif
+
+#ifdef CCDM_FIRST_STAGE
+static int first_stage_init(void)
+{
+ int res = 0;
+ puts("CCDM S1\n");
+ if (tpm_init() || tpm_startup(TPM_ST_CLEAR))
+ return 1;
+ res = first_stage_actions();
+#ifndef CCDM_SECOND_STAGE
+ if (!res) {
+ if (bl2_entry)
+ (*bl2_entry)();
+ res = 1;
+ }
+#endif
+ return res;
+}
+#endif
+
+#ifdef CCDM_SECOND_STAGE
+static int second_stage_init(void)
+{
+ static const char mac_suffix[] = ".mac";
+ bool did_first_stage_run = true;
+ int result = 0;
+ char *cptr, *mmcdev = NULL;
+ struct key_program *hmac_blob = NULL;
+ const char *image_path = "/ccdm.itb";
+ char *mac_path = NULL;
+ ulong image_addr;
+ size_t image_size;
+ uint32_t err;
+
+ printf("CCDM S2\n");
+ if (tpm_init())
+ return 1;
+ err = tpm_startup(TPM_ST_CLEAR);
+ if (err != TPM_INVALID_POSTINIT)
+ did_first_stage_run = false;
+
+#ifdef CCDM_AUTO_FIRST_STAGE
+ if (!did_first_stage_run && first_stage_actions())
+ goto failure;
+#else
+ if (!did_first_stage_run)
+ goto failure;
+#endif
+
+ if (hre_run_program(prg_stage2_prepare, sizeof(prg_stage2_prepare)))
+ goto failure;
+
+ /* run "prepboot" from env to get "mmcdev" set */
+ cptr = getenv("prepboot");
+ if (cptr && !run_command(cptr, 0))
+ mmcdev = getenv("mmcdev");
+ if (!mmcdev)
+ goto failure;
+
+ cptr = getenv("ramdiskimage");
+ if (cptr)
+ image_path = cptr;
+
+ mac_path = malloc(strlen(image_path) + strlen(mac_suffix) + 1);
+ if (mac_path == NULL)
+ goto failure;
+ strcpy(mac_path, image_path);
+ strcat(mac_path, mac_suffix);
+
+ /* read image from mmcdev (ccdm.itb) */
+ image_addr = (ulong)get_image_location();
+ if (fs_set_blk_dev("mmc", mmcdev, FS_TYPE_EXT))
+ goto failure;
+ image_size = fs_read(image_path, image_addr, 0, 0);
+ if (image_size <= 0)
+ goto failure;
+ printf("CCDM image found on %s, %d bytes\n", mmcdev, image_size);
+
+ hmac_blob = load_key_chunk("mmc", mmcdev, FS_TYPE_EXT, mac_path);
+ if (!hmac_blob) {
+ puts("failed to load mac file\n");
+ goto failure;
+ }
+ if (verify_program(hmac_blob)) {
+ puts("corrupted mac file\n");
+ goto failure;
+ }
+ if (check_hmac(hmac_blob, (u8 *)image_addr, image_size)) {
+ puts("image integrity could not be verified\n");
+ goto failure;
+ }
+ puts("CCDM image OK\n");
+
+ hre_run_program(prg_stage2_success, sizeof(prg_stage2_success));
+
+ goto end;
+failure:
+ result = 1;
+ hre_run_program(prg_stage_fail, sizeof(prg_stage_fail));
+end:
+ if (hmac_blob)
+ free(hmac_blob);
+ if (mac_path)
+ free(mac_path);
+
+ return result;
+}
+#endif
+
+int show_self_hash(void)
+{
+ struct h_reg *hash_ptr;
+#ifdef CCDM_SECOND_STAGE
+ struct h_reg hash;
+
+ hash_ptr = &hash;
+ if (compute_self_hash(hash_ptr))
+ return 1;
+#else
+ hash_ptr = &fix_hregs[FIX_HREG_SELF_HASH];
+#endif
+ puts("self hash: ");
+ if (hash_ptr && hash_ptr->valid)
+ print_buffer(0, hash_ptr->digest, 1, 20, 20);
+ else
+ puts("INVALID\n");
+
+ return 0;
+}
+
+/**
+ * @brief let the system hang.
+ *
+ * Called on error.
+ * Will stop the boot process; display a message and signal the error condition
+ * by blinking the "status" and the "finder" LED of the controller board.
+ *
+ * @note the develop version runs the blink cycle 2 times and then returns.
+ * The release version never returns.
+ */
+static void ccdm_hang(void)
+{
+ static const u64 f0 = 0x0ba3bb8ba2e880; /* blink code "finder" LED */
+ static const u64 s0 = 0x00f0f0f0f0f0f0; /* blink code "status" LED */
+ u64 f, s;
+ int i;
+#ifdef CCDM_DEVELOP
+ int j;
+#endif
+
+ I2C_SET_BUS(0);
+ pca9698_direction_output(0x22, 0, 0); /* Finder */
+ pca9698_direction_output(0x22, 4, 0); /* Status */
+
+ puts("### ERROR ### Please RESET the board ###\n");
+ bootstage_error(BOOTSTAGE_ID_NEED_RESET);
+#ifdef CCDM_DEVELOP
+ puts("*** ERROR ******** THIS WOULD HANG ******** ERROR ***\n");
+ puts("** but we continue since this is a DEVELOP version **\n");
+ puts("*** ERROR ******** THIS WOULD HANG ******** ERROR ***\n");
+ for (j = 2; j-- > 0;) {
+ putc('#');
+#else
+ for (;;) {
+#endif
+ f = f0;
+ s = s0;
+ for (i = 54; i-- > 0;) {
+ pca9698_set_value(0x22, 0, !(f & 1));
+ pca9698_set_value(0x22, 4, (s & 1));
+ f >>= 1;
+ s >>= 1;
+ mdelay(120);
+ }
+ }
+ puts("\ncontinue...\n");
+}
+
+int startup_ccdm_id_module(void)
+{
+ int result = 0;
+ unsigned int orig_i2c_bus;
+
+ orig_i2c_bus = I2C_GET_BUS();
+ I2C_SET_BUS(1);
+
+ /* goto end; */
+
+#ifdef CCDM_DEVELOP
+ show_self_hash();
+#endif
+#ifdef CCDM_FIRST_STAGE
+ result = first_stage_init();
+ if (result) {
+ puts("1st stage init failed\n");
+ goto failure;
+ }
+#endif
+#ifdef CCDM_SECOND_STAGE
+ result = second_stage_init();
+ if (result) {
+ puts("2nd stage init failed\n");
+ goto failure;
+ }
+#endif
+
+ goto end;
+failure:
+ result = 1;
+end:
+ I2C_SET_BUS(orig_i2c_bus);
+ if (result)
+ ccdm_hang();
+
+ return result;
+}
diff --git a/board/gdsys/p1022/controlcenterd-id.h b/board/gdsys/p1022/controlcenterd-id.h
new file mode 100644
index 0000000000..de4770ac8d
--- /dev/null
+++ b/board/gdsys/p1022/controlcenterd-id.h
@@ -0,0 +1,29 @@
+/*
+ * (C) Copyright 2013
+ * Reinhard Pfau, Guntermann & Drunck GmbH, reinhard.pfau@gdsys.cc
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the Free
+ * Software Foundation; either version 2 of the License, or (at your option)
+ * any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
+ * MA 02110-1301, USA.
+ */
+
+#ifndef __CONTROLCENTER_ID_H
+#define __CONTROLCENTER_ID_H
+
+int ccdm_compute_self_hash(void);
+int startup_ccdm_id_module(void);
+
+int show_self_hash(void);
+
+#endif /* __CONTROLCENTER_ID_H */
diff --git a/board/gdsys/p1022/controlcenterd.c b/board/gdsys/p1022/controlcenterd.c
new file mode 100644
index 0000000000..81c22bc94c
--- /dev/null
+++ b/board/gdsys/p1022/controlcenterd.c
@@ -0,0 +1,425 @@
+/*
+ * (C) Copyright 2013
+ * Dirk Eibach, Guntermann & Drunck GmbH, dirk.eibach@gdsys.cc
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <command.h>
+#include <pci.h>
+#include <asm/processor.h>
+#include <asm/mmu.h>
+#include <asm/cache.h>
+#include <asm/immap_85xx.h>
+#include <asm/fsl_pci.h>
+#include <asm/fsl_ddr_sdram.h>
+#include <asm/fsl_serdes.h>
+#include <asm/io.h>
+#include <libfdt.h>
+#include <fdt_support.h>
+#include <fsl_mdio.h>
+#include <tsec.h>
+#include <asm/fsl_law.h>
+#include <netdev.h>
+#include <i2c.h>
+#include <pca9698.h>
+#include <watchdog.h>
+#include "../common/dp501.h"
+#include "controlcenterd-id.h"
+
+DECLARE_GLOBAL_DATA_PTR;
+
+enum {
+ HWVER_100 = 0,
+ HWVER_110 = 1,
+ HWVER_120 = 2,
+};
+
+struct ihs_fpga {
+ u32 reflection_low; /* 0x0000 */
+ u32 versions; /* 0x0004 */
+ u32 fpga_version; /* 0x0008 */
+ u32 fpga_features; /* 0x000c */
+};
+
+#ifndef CONFIG_TRAILBLAZER
+static struct pci_device_id hydra_supported[] = {
+ { 0x6d5e, 0xcdc0 },
+ {}
+};
+
+static void hydra_initialize(void);
+#endif
+
+int board_early_init_f(void)
+{
+ ccsr_gur_t *gur = (void *)CONFIG_SYS_MPC85xx_GUTS_ADDR;
+ ccsr_gpio_t *pgpio = (void *)(CONFIG_SYS_MPC85xx_GPIO3_ADDR);
+
+ /* Reset eLBC_DIU and SPI_eLBC in case we are booting from SD */
+ clrsetbits_be32(&gur->pmuxcr, 0x00600000, 0x80000000);
+
+ /* Set pmuxcr to allow both i2c1 and i2c2 */
+ setbits_be32(&gur->pmuxcr, 0x00001000);
+
+ /* Set pmuxcr to enable GPIO 3_11-3_13 */
+ setbits_be32(&gur->pmuxcr, 0x00000010);
+
+ /* Set pmuxcr to enable GPIO 2_31,3_9+10 */
+ setbits_be32(&gur->pmuxcr, 0x00000020);
+
+ /* Set pmuxcr to enable GPIO 2_28-2_30 */
+ setbits_be32(&gur->pmuxcr, 0x000000c0);
+
+ /* Set pmuxcr to enable GPIO 3_20-3_22 */
+ setbits_be32(&gur->pmuxcr2, 0x03000000);
+
+ /* Set pmuxcr to enable IRQ0-2 */
+ clrbits_be32(&gur->pmuxcr, 0x00000300);
+
+ /* Set pmuxcr to disable IRQ3-11 */
+ setbits_be32(&gur->pmuxcr, 0x000000F0);
+
+ /* Read back the register to synchronize the write. */
+ in_be32(&gur->pmuxcr);
+
+ /* Set the pin muxing to enable ETSEC2. */
+ clrbits_be32(&gur->pmuxcr2, 0x001F8000);
+
+#ifdef CONFIG_TRAILBLAZER
+ /*
+ * GPIO3_10 SPERRTRIGGER
+ */
+ setbits_be32(&pgpio->gpdir, 0x00200000);
+ clrbits_be32(&pgpio->gpdat, 0x00200000);
+ udelay(100);
+ setbits_be32(&pgpio->gpdat, 0x00200000);
+ udelay(100);
+ clrbits_be32(&pgpio->gpdat, 0x00200000);
+#endif
+
+ /*
+ * GPIO3_11 CPU-TO-FPGA-RESET#
+ */
+ setbits_be32(&pgpio->gpdir, 0x00100000);
+ clrbits_be32(&pgpio->gpdat, 0x00100000);
+
+ /*
+ * GPIO3_21 CPU-STATUS-WATCHDOG-TRIGGER#
+ */
+ setbits_be32(&pgpio->gpdir, 0x00000400);
+
+ return 0;
+}
+
+int checkboard(void)
+{
+ printf("Board: ControlCenter DIGITAL\n");
+
+ return 0;
+}
+
+int misc_init_r(void)
+{
+ return 0;
+}
+
+/*
+ * A list of PCI and SATA slots
+ */
+enum slot_id {
+ SLOT_PCIE1 = 1,
+ SLOT_PCIE2,
+ SLOT_PCIE3,
+ SLOT_PCIE4,
+ SLOT_PCIE5,
+ SLOT_SATA1,
+ SLOT_SATA2
+};
+
+/*
+ * This array maps the slot identifiers to their names on the P1022DS board.
+ */
+static const char * const slot_names[] = {
+ [SLOT_PCIE1] = "Slot 1",
+ [SLOT_PCIE2] = "Slot 2",
+ [SLOT_PCIE3] = "Slot 3",
+ [SLOT_PCIE4] = "Slot 4",
+ [SLOT_PCIE5] = "Mini-PCIe",
+ [SLOT_SATA1] = "SATA 1",
+ [SLOT_SATA2] = "SATA 2",
+};
+
+/*
+ * This array maps a given SERDES configuration and SERDES device to the PCI or
+ * SATA slot that it connects to. This mapping is hard-coded in the FPGA.
+ */
+static u8 serdes_dev_slot[][SATA2 + 1] = {
+ [0x01] = { [PCIE3] = SLOT_PCIE4, [PCIE2] = SLOT_PCIE5 },
+ [0x02] = { [SATA1] = SLOT_SATA1, [SATA2] = SLOT_SATA2 },
+ [0x09] = { [PCIE1] = SLOT_PCIE1, [PCIE3] = SLOT_PCIE4,
+ [PCIE2] = SLOT_PCIE5 },
+ [0x16] = { [PCIE1] = SLOT_PCIE1, [PCIE3] = SLOT_PCIE2,
+ [PCIE2] = SLOT_PCIE3,
+ [SATA1] = SLOT_SATA1, [SATA2] = SLOT_SATA2 },
+ [0x17] = { [PCIE1] = SLOT_PCIE1, [PCIE3] = SLOT_PCIE2,
+ [PCIE2] = SLOT_PCIE3 },
+ [0x1a] = { [PCIE1] = SLOT_PCIE1, [PCIE2] = SLOT_PCIE3,
+ [PCIE2] = SLOT_PCIE3,
+ [SATA1] = SLOT_SATA1, [SATA2] = SLOT_SATA2 },
+ [0x1c] = { [PCIE1] = SLOT_PCIE1,
+ [SATA1] = SLOT_SATA1, [SATA2] = SLOT_SATA2 },
+ [0x1e] = { [PCIE1] = SLOT_PCIE1, [PCIE3] = SLOT_PCIE3 },
+ [0x1f] = { [PCIE1] = SLOT_PCIE1 },
+};
+
+
+/*
+ * Returns the name of the slot to which the PCIe or SATA controller is
+ * connected
+ */
+const char *board_serdes_name(enum srds_prtcl device)
+{
+ ccsr_gur_t *gur = (void *)CONFIG_SYS_MPC85xx_GUTS_ADDR;
+ u32 pordevsr = in_be32(&gur->pordevsr);
+ unsigned int srds_cfg = (pordevsr & MPC85xx_PORDEVSR_IO_SEL) >>
+ MPC85xx_PORDEVSR_IO_SEL_SHIFT;
+ enum slot_id slot = serdes_dev_slot[srds_cfg][device];
+ const char *name = slot_names[slot];
+
+ if (name)
+ return name;
+ else
+ return "Nothing";
+}
+
+void hw_watchdog_reset(void)
+{
+ ccsr_gpio_t *pgpio = (void *)(CONFIG_SYS_MPC85xx_GPIO3_ADDR);
+
+ clrbits_be32(&pgpio->gpdat, 0x00000400);
+ setbits_be32(&pgpio->gpdat, 0x00000400);
+}
+
+#ifdef CONFIG_TRAILBLAZER
+int do_bootd(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
+{
+ int rcode = 0;
+
+ if (run_command(getenv("bootcmd"), flag) < 0)
+ rcode = 1;
+ return rcode;
+}
+
+int board_early_init_r(void)
+{
+ ccsr_gpio_t *pgpio = (void *)(CONFIG_SYS_MPC85xx_GPIO3_ADDR);
+
+ /*
+ * GPIO3_12 PPC_SYSTEMREADY#
+ */
+ setbits_be32(&pgpio->gpdir, 0x00080000);
+ setbits_be32(&pgpio->gpodr, 0x00080000);
+ clrbits_be32(&pgpio->gpdat, 0x00080000);
+
+ return ccdm_compute_self_hash();
+}
+
+int last_stage_init(void)
+{
+ startup_ccdm_id_module();
+ return 0;
+}
+
+#else
+void pci_init_board(void)
+{
+ fsl_pcie_init_board(0);
+
+ hydra_initialize();
+}
+
+int board_early_init_r(void)
+{
+ unsigned int k = 0;
+ ccsr_gpio_t *pgpio = (void *)(CONFIG_SYS_MPC85xx_GPIO3_ADDR);
+
+ /* wait for FPGA configuration to finish */
+ while (!pca9698_get_value(0x22, 11) && (k++ < 30))
+ udelay(100000);
+
+ if (k > 30) {
+ puts("FPGA configuration timed out.\n");
+ } else {
+ /* clear FPGA reset */
+ udelay(1000);
+ setbits_be32(&pgpio->gpdat, 0x00100000);
+ }
+
+ /* give time for PCIe link training */
+ udelay(100000);
+
+ /*
+ * GPIO3_12 PPC_SYSTEMREADY#
+ */
+ setbits_be32(&pgpio->gpdir, 0x00080000);
+ setbits_be32(&pgpio->gpodr, 0x00080000);
+ clrbits_be32(&pgpio->gpdat, 0x00080000);
+
+ return 0;
+}
+
+int last_stage_init(void)
+{
+ /* Turn on Parade DP501 */
+ pca9698_direction_output(0x22, 7, 1);
+ udelay(500000);
+
+ dp501_powerup(0x08);
+
+ startup_ccdm_id_module();
+
+ return 0;
+}
+
+/*
+ * Initialize on-board and/or PCI Ethernet devices
+ *
+ * Returns:
+ * <0, error
+ * 0, no ethernet devices found
+ * >0, number of ethernet devices initialized
+ */
+int board_eth_init(bd_t *bis)
+{
+ struct fsl_pq_mdio_info mdio_info;
+ struct tsec_info_struct tsec_info[2];
+ unsigned int num = 0;
+
+#ifdef CONFIG_TSEC1
+ SET_STD_TSEC_INFO(tsec_info[num], 1);
+ num++;
+#endif
+#ifdef CONFIG_TSEC2
+ SET_STD_TSEC_INFO(tsec_info[num], 2);
+ num++;
+#endif
+
+ mdio_info.regs = (struct tsec_mii_mng *)CONFIG_SYS_MDIO_BASE_ADDR;
+ mdio_info.name = DEFAULT_MII_NAME;
+ fsl_pq_mdio_init(bis, &mdio_info);
+
+ return tsec_eth_init(bis, tsec_info, num) + pci_eth_init(bis);
+}
+
+#ifdef CONFIG_OF_BOARD_SETUP
+void ft_board_setup(void *blob, bd_t *bd)
+{
+ phys_addr_t base;
+ phys_size_t size;
+
+ ft_cpu_setup(blob, bd);
+
+ base = getenv_bootm_low();
+ size = getenv_bootm_size();
+
+ fdt_fixup_memory(blob, (u64)base, (u64)size);
+
+#ifdef CONFIG_HAS_FSL_DR_USB
+ fdt_fixup_dr_usb(blob, bd);
+#endif
+
+ FT_FSL_PCI_SETUP;
+}
+#endif
+
+static void hydra_initialize(void)
+{
+ unsigned int i;
+ pci_dev_t devno;
+
+ /* Find and probe all the matching PCI devices */
+ for (i = 0; (devno = pci_find_devices(hydra_supported, i)) >= 0; i++) {
+ u32 val;
+ struct ihs_fpga *fpga;
+ u32 versions;
+ u32 fpga_version;
+ u32 fpga_features;
+
+ unsigned hardware_version;
+ unsigned feature_uart_channels;
+ unsigned feature_sb_channels;
+
+ /* Try to enable I/O accesses and bus-mastering */
+ val = PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER;
+ pci_write_config_dword(devno, PCI_COMMAND, val);
+
+ /* Make sure it worked */
+ pci_read_config_dword(devno, PCI_COMMAND, &val);
+ if (!(val & PCI_COMMAND_MEMORY)) {
+ puts("Can't enable I/O memory\n");
+ continue;
+ }
+ if (!(val & PCI_COMMAND_MASTER)) {
+ puts("Can't enable bus-mastering\n");
+ continue;
+ }
+
+ /* read FPGA details */
+ fpga = pci_map_bar(devno, PCI_BASE_ADDRESS_0,
+ PCI_REGION_MEM);
+
+ versions = readl(fpga->versions);
+ fpga_version = readl(fpga->fpga_version);
+ fpga_features = readl(fpga->fpga_features);
+
+ hardware_version = versions & 0xf;
+ feature_uart_channels = (fpga_features >> 6) & 0x1f;
+ feature_sb_channels = fpga_features & 0x1f;
+
+ printf("FPGA%d: ", i);
+
+ switch (hardware_version) {
+ case HWVER_100:
+ printf("HW-Ver 1.00\n");
+ break;
+
+ case HWVER_110:
+ printf("HW-Ver 1.10\n");
+ break;
+
+ case HWVER_120:
+ printf("HW-Ver 1.20\n");
+ break;
+
+ default:
+ printf("HW-Ver %d(not supported)\n",
+ hardware_version);
+ break;
+ }
+
+ printf(" FPGA V %d.%02d, features:",
+ fpga_version / 100, fpga_version % 100);
+
+ printf(" %d uart channel(s)", feature_uart_channels);
+ printf(" %d sideband channel(s)\n", feature_sb_channels);
+ }
+}
+#endif
diff --git a/board/gdsys/p1022/ddr.c b/board/gdsys/p1022/ddr.c
new file mode 100644
index 0000000000..4a652de430
--- /dev/null
+++ b/board/gdsys/p1022/ddr.c
@@ -0,0 +1,71 @@
+/*
+ * Copyright 2010 Freescale Semiconductor, Inc.
+ * Authors: Srikanth Srinivasan <srikanth.srinivasan@freescale.com>
+ * Timur Tabi <timur@freescale.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the Free
+ * Software Foundation; either version 2 of the License, or (at your option)
+ * any later version.
+ */
+
+#include <common.h>
+#include <i2c.h>
+
+#include <asm/fsl_ddr_sdram.h>
+#include <asm/fsl_ddr_dimm_params.h>
+
+void fsl_ddr_board_options(memctl_options_t *popts, dimm_params_t *pdimm,
+ unsigned int ctrl_num)
+{
+ unsigned int i;
+
+ if (ctrl_num) {
+ printf("Wrong parameter for controller number %d", ctrl_num);
+ return;
+ }
+ if (!pdimm->n_ranks)
+ return;
+
+ /* set odt_rd_cfg and odt_wr_cfg. */
+ for (i = 0; i < CONFIG_CHIP_SELECTS_PER_CTRL; i++) {
+ popts->cs_local_opts[i].odt_rd_cfg = 0;
+ popts->cs_local_opts[i].odt_wr_cfg = 1;
+ }
+
+ popts->clk_adjust = 5;
+ popts->cpo_override = 0x1f;
+ popts->write_data_delay = 2;
+ popts->half_strength_driver_enable = 1;
+
+ /* Per AN4039, enable ZQ calibration. */
+ popts->zq_en = 1;
+}
+
+#ifdef CONFIG_SPD_EEPROM
+/*
+ * we only have a "fake" SPD-EEPROM here, which has 16 bit addresses
+ */
+void get_spd(generic_spd_eeprom_t *spd, u8 i2c_address)
+{
+ int ret = i2c_read(i2c_address, 0, 2, (uchar *)spd,
+ sizeof(generic_spd_eeprom_t));
+
+ if (ret) {
+ if (i2c_address ==
+#ifdef SPD_EEPROM_ADDRESS
+ SPD_EEPROM_ADDRESS
+#elif defined(SPD_EEPROM_ADDRESS1)
+ SPD_EEPROM_ADDRESS1
+#endif
+ ) {
+ printf("DDR: failed to read SPD from address %u\n",
+ i2c_address);
+ } else {
+ debug("DDR: failed to read SPD from address %u\n",
+ i2c_address);
+ }
+ memset(spd, 0, sizeof(generic_spd_eeprom_t));
+ }
+}
+#endif
diff --git a/board/gdsys/p1022/diu.c b/board/gdsys/p1022/diu.c
new file mode 100644
index 0000000000..52ac1e6ecc
--- /dev/null
+++ b/board/gdsys/p1022/diu.c
@@ -0,0 +1,87 @@
+/*
+ * Copyright 2010-2011 Freescale Semiconductor, Inc.
+ * Authors: Timur Tabi <timur@freescale.com>
+ *
+ * FSL DIU Framebuffer driver
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the Free
+ * Software Foundation; either version 2 of the License, or (at your option)
+ * any later version.
+ */
+
+#include <common.h>
+#include <command.h>
+#include <linux/ctype.h>
+#include <asm/io.h>
+#include <stdio_dev.h>
+#include <video_fb.h>
+#include <fsl_diu_fb.h>
+
+#define PMUXCR_ELBCDIU_MASK 0xc0000000
+#define PMUXCR_ELBCDIU_NOR16 0x80000000
+#define PMUXCR_ELBCDIU_DIU 0x40000000
+
+/*
+ * DIU Area Descriptor
+ *
+ * Note that we need to byte-swap the value before it's written to the AD
+ * register. So even though the registers don't look like they're in the same
+ * bit positions as they are on the MPC8610, the same value is written to the
+ * AD register on the MPC8610 and on the P1022.
+ */
+#define AD_BYTE_F 0x10000000
+#define AD_ALPHA_C_SHIFT 25
+#define AD_BLUE_C_SHIFT 23
+#define AD_GREEN_C_SHIFT 21
+#define AD_RED_C_SHIFT 19
+#define AD_PIXEL_S_SHIFT 16
+#define AD_COMP_3_SHIFT 12
+#define AD_COMP_2_SHIFT 8
+#define AD_COMP_1_SHIFT 4
+#define AD_COMP_0_SHIFT 0
+
+/*
+ * Variables used by the DIU/LBC switching code. It's safe to makes these
+ * global, because the DIU requires DDR, so we'll only run this code after
+ * relocation.
+ */
+static u32 pmuxcr;
+
+void diu_set_pixel_clock(unsigned int pixclock)
+{
+ ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
+ unsigned long speed_ccb, temp;
+ u32 pixval;
+
+ speed_ccb = get_bus_freq(0);
+ temp = 1000000000 / pixclock;
+ temp *= 1000;
+ pixval = speed_ccb / temp;
+ debug("DIU pixval = %u\n", pixval);
+
+ /* Modify PXCLK in GUTS CLKDVDR */
+ temp = in_be32(&gur->clkdvdr) & 0x2000FFFF;
+ out_be32(&gur->clkdvdr, temp); /* turn off clock */
+ out_be32(&gur->clkdvdr, temp | 0x80000000 | ((pixval & 0x1F) << 16));
+}
+
+int platform_diu_init(unsigned int xres, unsigned int yres, const char *port)
+{
+ ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
+ u32 pixel_format;
+
+ pixel_format = cpu_to_le32(AD_BYTE_F | (3 << AD_ALPHA_C_SHIFT) |
+ (0 << AD_BLUE_C_SHIFT) | (1 << AD_GREEN_C_SHIFT) |
+ (2 << AD_RED_C_SHIFT) | (8 << AD_COMP_3_SHIFT) |
+ (8 << AD_COMP_2_SHIFT) | (8 << AD_COMP_1_SHIFT) |
+ (8 << AD_COMP_0_SHIFT) | (3 << AD_PIXEL_S_SHIFT));
+
+ printf("DIU: Switching to %ux%u\n", xres, yres);
+
+ /* Set PMUXCR to switch the muxed pins from the LBC to the DIU */
+ clrsetbits_be32(&gur->pmuxcr, PMUXCR_ELBCDIU_MASK, PMUXCR_ELBCDIU_DIU);
+ pmuxcr = in_be32(&gur->pmuxcr);
+
+ return fsl_diu_init(xres, yres, pixel_format, 0);
+}
diff --git a/board/gdsys/p1022/law.c b/board/gdsys/p1022/law.c
new file mode 100644
index 0000000000..96f38f7c6f
--- /dev/null
+++ b/board/gdsys/p1022/law.c
@@ -0,0 +1,20 @@
+/*
+ * Copyright 2010 Freescale Semiconductor, Inc.
+ * Authors: Srikanth Srinivasan <srikanth.srinivasan@freescale.com>
+ * Timur Tabi <timur@freescale.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the Free
+ * Software Foundation; either version 2 of the License, or (at your option)
+ * any later version.
+ */
+
+#include <common.h>
+#include <asm/fsl_law.h>
+#include <asm/mmu.h>
+
+struct law_entry law_table[] = {
+ SET_LAW(CONFIG_SYS_ELBC_BASE_PHYS, LAW_SIZE_1M, LAW_TRGT_IF_LBC),
+};
+
+int num_law_entries = ARRAY_SIZE(law_table);
diff --git a/board/gdsys/p1022/sdhc_boot.c b/board/gdsys/p1022/sdhc_boot.c
new file mode 100644
index 0000000000..e4323181fc
--- /dev/null
+++ b/board/gdsys/p1022/sdhc_boot.c
@@ -0,0 +1,63 @@
+/*
+ * Copyright 2011 Freescale Semiconductor, Inc.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <mmc.h>
+#include <malloc.h>
+
+/*
+ * The environment variables are written to just after the u-boot image
+ * on SDCard, so we must read the MBR to get the start address and code
+ * length of the u-boot image, then calculate the address of the env.
+ */
+#define ESDHC_BOOT_IMAGE_SIZE 0x48
+#define ESDHC_BOOT_IMAGE_ADDR 0x50
+
+int mmc_get_env_addr(struct mmc *mmc, u32 *env_addr)
+{
+ u8 *tmp_buf;
+ u32 blklen, code_offset, code_len, n;
+
+ blklen = mmc->read_bl_len;
+ tmp_buf = malloc(blklen);
+ if (!tmp_buf)
+ return 1;
+
+ /* read out the first block, get the config data information */
+ n = mmc->block_dev.block_read(mmc->block_dev.dev, 0, 1, tmp_buf);
+ if (!n) {
+ free(tmp_buf);
+ return 1;
+ }
+
+ /* Get the Source Address, from offset 0x50 */
+ code_offset = *(u32 *)(tmp_buf + ESDHC_BOOT_IMAGE_ADDR);
+
+ /* Get the code size from offset 0x48 */
+ code_len = *(u32 *)(tmp_buf + ESDHC_BOOT_IMAGE_SIZE);
+
+ *env_addr = code_offset + code_len;
+
+ free(tmp_buf);
+
+ return 0;
+}
diff --git a/board/gdsys/p1022/tlb.c b/board/gdsys/p1022/tlb.c
new file mode 100644
index 0000000000..9cad692783
--- /dev/null
+++ b/board/gdsys/p1022/tlb.c
@@ -0,0 +1,77 @@
+/*
+ * Copyright 2010 Freescale Semiconductor, Inc.
+ * Authors: Srikanth Srinivasan <srikanth.srinivasan@freescale.com>
+ * Timur Tabi <timur@freescale.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the Free
+ * Software Foundation; either version 2 of the License, or (at your option)
+ * any later version.
+ */
+
+#include <common.h>
+#include <asm/mmu.h>
+
+struct fsl_e_tlb_entry tlb_table[] = {
+ /* TLB 0 - for temp stack in cache */
+ SET_TLB_ENTRY(0, CONFIG_SYS_INIT_RAM_ADDR, CONFIG_SYS_INIT_RAM_ADDR,
+ MAS3_SX|MAS3_SW|MAS3_SR, 0,
+ 0, 0, BOOKE_PAGESZ_4K, 0),
+ SET_TLB_ENTRY(0, CONFIG_SYS_INIT_RAM_ADDR + 4 * 1024,
+ CONFIG_SYS_INIT_RAM_ADDR + 4 * 1024,
+ MAS3_SX|MAS3_SW|MAS3_SR, 0,
+ 0, 0, BOOKE_PAGESZ_4K, 0),
+ SET_TLB_ENTRY(0, CONFIG_SYS_INIT_RAM_ADDR + 8 * 1024,
+ CONFIG_SYS_INIT_RAM_ADDR + 8 * 1024,
+ MAS3_SX|MAS3_SW|MAS3_SR, 0,
+ 0, 0, BOOKE_PAGESZ_4K, 0),
+ SET_TLB_ENTRY(0, CONFIG_SYS_INIT_RAM_ADDR + 12 * 1024,
+ CONFIG_SYS_INIT_RAM_ADDR + 12 * 1024,
+ MAS3_SX|MAS3_SW|MAS3_SR, 0,
+ 0, 0, BOOKE_PAGESZ_4K, 0),
+
+ /* TLB 1 */
+ /* *I*** - Covers boot page */
+ SET_TLB_ENTRY(1, 0xfffff000, 0xfffff000,
+ MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I,
+ 0, 0, BOOKE_PAGESZ_4K, 1),
+
+ /* *I*G* - CCSRBAR */
+ SET_TLB_ENTRY(1, CONFIG_SYS_CCSRBAR, CONFIG_SYS_CCSRBAR_PHYS,
+ MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
+ 0, 1, BOOKE_PAGESZ_1M, 1),
+
+ /* *I*G* - eLBC */
+ SET_TLB_ENTRY(1, CONFIG_SYS_ELBC_BASE, CONFIG_SYS_ELBC_BASE_PHYS,
+ MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
+ 0, 2, BOOKE_PAGESZ_1M, 1),
+
+#if defined(CONFIG_TRAILBLAZER)
+ /* *I*G - L2SRAM */
+ SET_TLB_ENTRY(1, CONFIG_SYS_INIT_L2_ADDR, CONFIG_SYS_INIT_L2_ADDR_PHYS,
+ MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
+ 0, 9, BOOKE_PAGESZ_256K, 1),
+#else
+ /* *I*G* - PCI */
+ SET_TLB_ENTRY(1, CONFIG_SYS_PCIE1_MEM_VIRT, CONFIG_SYS_PCIE1_MEM_PHYS,
+ MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
+ 0, 3, BOOKE_PAGESZ_256M, 1),
+ SET_TLB_ENTRY(1, CONFIG_SYS_PCIE1_MEM_VIRT + 0x10000000,
+ CONFIG_SYS_PCIE1_MEM_PHYS + 0x10000000,
+ MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
+ 0, 4, BOOKE_PAGESZ_256M, 1),
+
+ /* *I*G* - PCI I/O */
+ SET_TLB_ENTRY(1, CONFIG_SYS_PCIE1_IO_VIRT, CONFIG_SYS_PCIE1_IO_PHYS,
+ MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
+ 0, 5, BOOKE_PAGESZ_256K, 1),
+
+#ifdef CONFIG_SYS_RAMBOOT
+ SET_TLB_ENTRY(1, CONFIG_SYS_DDR_SDRAM_BASE, CONFIG_SYS_DDR_SDRAM_BASE,
+ MAS3_SX|MAS3_SW|MAS3_SR, 0,
+ 0, 6, BOOKE_PAGESZ_1G, 1),
+#endif
+#endif
+};
+
+int num_tlb_entries = ARRAY_SIZE(tlb_table);
generated by cgit (git 2.34.1) at 2024-12-26 04:01:43 +0000