diff options
Diffstat (limited to 'board')
-rw-r--r-- | board/esd/ash405/Makefile | 4 | ||||
-rw-r--r-- | board/esd/ash405/ash405.c | 43 | ||||
-rw-r--r-- | board/esd/cms700/Makefile | 5 | ||||
-rw-r--r-- | board/esd/cms700/cms700.c | 39 | ||||
-rw-r--r-- | board/esd/hh405/Makefile | 5 | ||||
-rw-r--r-- | board/esd/hh405/hh405.c | 22 | ||||
-rw-r--r-- | board/esd/hub405/Makefile | 4 | ||||
-rw-r--r-- | board/esd/hub405/hub405.c | 34 | ||||
-rw-r--r-- | board/esd/plu405/Makefile | 5 | ||||
-rw-r--r-- | board/esd/plu405/plu405.c | 56 | ||||
-rw-r--r-- | board/esd/voh405/Makefile | 4 | ||||
-rw-r--r-- | board/esd/voh405/voh405.c | 20 | ||||
-rw-r--r-- | board/esd/wuh405/Makefile | 4 | ||||
-rw-r--r-- | board/esd/wuh405/wuh405.c | 33 |
14 files changed, 53 insertions, 225 deletions
diff --git a/board/esd/ash405/Makefile b/board/esd/ash405/Makefile index 4d75868ea8..308f752d09 100644 --- a/board/esd/ash405/Makefile +++ b/board/esd/ash405/Makefile @@ -28,7 +28,9 @@ endif LIB = $(obj)lib$(BOARD).a -COBJS = $(BOARD).o flash.o ../common/misc.o +COBJS = $(BOARD).o flash.o \ + ../common/misc.o \ + ../common/esd405ep_nand.o \ SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) OBJS := $(addprefix $(obj),$(COBJS)) diff --git a/board/esd/ash405/ash405.c b/board/esd/ash405/ash405.c index 84fc3a01dc..0151d740c7 100644 --- a/board/esd/ash405/ash405.c +++ b/board/esd/ash405/ash405.c @@ -23,6 +23,7 @@ #include <common.h> #include <asm/processor.h> +#include <asm/io.h> #include <command.h> #include <malloc.h> @@ -33,6 +34,7 @@ #endif extern int do_reset (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]); +extern void lxt971_no_sleep(void); /* fpga configuration data - gzip compressed and generated by bin2c */ const unsigned char fpgadata[] = @@ -164,18 +166,12 @@ int misc_init_r (void) /* * Reset external DUARTs */ - out32(GPIO0_OR, in32(GPIO0_OR) | CFG_DUART_RST); /* set reset to high */ + out_be32((void *)GPIO0_OR, in_be32((void *)GPIO0_OR) | CFG_DUART_RST); udelay(10); /* wait 10us */ - out32(GPIO0_OR, in32(GPIO0_OR) & ~CFG_DUART_RST); /* set reset to low */ + out_be32((void *)GPIO0_OR, in_be32((void *)GPIO0_OR) & ~CFG_DUART_RST); udelay(1000); /* wait 1ms */ /* - * Set NAND-FLASH GPIO signals to default - */ - out32(GPIO0_OR, in32(GPIO0_OR) & ~(CFG_NAND_CLE | CFG_NAND_ALE)); - out32(GPIO0_OR, in32(GPIO0_OR) | CFG_NAND_CE); - - /* * Enable interrupts in exar duart mcr[3] */ *duart0_mcr = 0x08; @@ -218,35 +214,18 @@ long int initdram (int board_type) mtdcr(memcfga, mem_mb0cf); val = mfdcr(memcfgd); -#if 0 - printf("\nmb0cf=%x\n", val); /* test-only */ - printf("strap=%x\n", mfdcr(strap)); /* test-only */ -#endif - return (4*1024*1024 << ((val & 0x000e0000) >> 17)); } /* ------------------------------------------------------------------------- */ -int testdram (void) +void reset_phy(void) { - /* TODO: XXX XXX XXX */ - printf ("test: 16 MB - ok\n"); - - return (0); -} +#ifdef CONFIG_LXT971_NO_SLEEP -/* ------------------------------------------------------------------------- */ - -#if (CONFIG_COMMANDS & CFG_CMD_NAND) -#include <linux/mtd/nand_legacy.h> -extern struct nand_chip nand_dev_desc[CFG_MAX_NAND_DEVICE]; - -void nand_init(void) -{ - nand_probe(CFG_NAND_BASE); - if (nand_dev_desc[0].ChipID != NAND_ChipID_UNKNOWN) { - print_size(nand_dev_desc[0].totlen, "\n"); - } -} + /* + * Disable sleep mode in LXT971 + */ + lxt971_no_sleep(); #endif +} diff --git a/board/esd/cms700/Makefile b/board/esd/cms700/Makefile index df487662fd..0d4ab2d13a 100644 --- a/board/esd/cms700/Makefile +++ b/board/esd/cms700/Makefile @@ -33,7 +33,10 @@ CPLD = ../common/xilinx_jtag/lenval.o \ ../common/xilinx_jtag/micro.o \ ../common/xilinx_jtag/ports.o -COBJS = $(BOARD).o flash.o ../common/misc.o $(CPLD) +COBJS = $(BOARD).o flash.o \ + ../common/misc.o \ + $(CPLD) \ + ../common/esd405ep_nand.o \ SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) OBJS := $(addprefix $(obj),$(COBJS)) diff --git a/board/esd/cms700/cms700.c b/board/esd/cms700/cms700.c index cb04710737..2cdd7be360 100644 --- a/board/esd/cms700/cms700.c +++ b/board/esd/cms700/cms700.c @@ -1,5 +1,5 @@ /* - * (C) Copyright 2005 + * (C) Copyright 2005-2007 * Matthias Fuchs, esd gmbh germany, matthias.fuchs@esd-electronics.com * * See file CREDITS for list of people who contributed to this @@ -23,6 +23,7 @@ #include <common.h> #include <asm/processor.h> +#include <asm/io.h> #include <command.h> #include <malloc.h> @@ -68,9 +69,9 @@ int board_early_init_f (void) /* * Reset CPLD via GPIO12 (CS3) pin */ - out32(GPIO0_OR, in32(GPIO0_OR) & ~CFG_PLD_RESET); + out_be32((void *)GPIO0_OR, in_be32((void *)GPIO0_OR) & ~CFG_PLD_RESET); udelay(1000); /* wait 1ms */ - out32(GPIO0_OR, in32(GPIO0_OR) | CFG_PLD_RESET); + out_be32((void *)GPIO0_OR, in_be32((void *)GPIO0_OR) | CFG_PLD_RESET); udelay(1000); /* wait 1ms */ return 0; @@ -94,13 +95,7 @@ int misc_init_r (void) /* * Setup and enable EEPROM write protection */ - out32(GPIO0_OR, in32(GPIO0_OR) | CFG_EEPROM_WP); - - /* - * Set NAND-FLASH GPIO signals to default - */ - out32(GPIO0_OR, in32(GPIO0_OR) & ~(CFG_NAND_CLE | CFG_NAND_ALE)); - out32(GPIO0_OR, in32(GPIO0_OR) | CFG_NAND_CE); + out_be32((void *)GPIO0_OR, in_be32((void *)GPIO0_OR) | CFG_EEPROM_WP); return (0); } @@ -153,11 +148,6 @@ long int initdram (int board_type) mtdcr(memcfga, mem_mb0cf); val = mfdcr(memcfgd); -#if 0 - printf("\nmb0cf=%x\n", val); /* test-only */ - printf("strap=%x\n", mfdcr(strap)); /* test-only */ -#endif - return (4*1024*1024 << ((val & 0x000e0000) >> 17)); } @@ -180,17 +170,17 @@ int eeprom_write_enable (unsigned dev_addr, int state) switch (state) { case 1: /* Enable write access, clear bit GPIO_SINT2. */ - out32(GPIO0_OR, in32(GPIO0_OR) & ~CFG_EEPROM_WP); + out_be32((void *)GPIO0_OR, in_be32((void *)GPIO0_OR) & ~CFG_EEPROM_WP); state = 0; break; case 0: /* Disable write access, set bit GPIO_SINT2. */ - out32(GPIO0_OR, in32(GPIO0_OR) | CFG_EEPROM_WP); + out_be32((void *)GPIO0_OR, in_be32((void *)GPIO0_OR) | CFG_EEPROM_WP); state = 0; break; default: /* Read current status back. */ - state = (0 == (in32(GPIO0_OR) & CFG_EEPROM_WP)); + state = (0 == (in_be32((void *)GPIO0_OR) & CFG_EEPROM_WP)); break; } } @@ -235,19 +225,6 @@ U_BOOT_CMD(eepwren, 2, 0, do_eep_wren, /* ------------------------------------------------------------------------- */ -#if (CONFIG_COMMANDS & CFG_CMD_NAND) -#include <linux/mtd/nand_legacy.h> -extern struct nand_chip nand_dev_desc[CFG_MAX_NAND_DEVICE]; - -void nand_init(void) -{ - nand_probe(CFG_NAND_BASE); - if (nand_dev_desc[0].ChipID != NAND_ChipID_UNKNOWN) { - print_size(nand_dev_desc[0].totlen, "\n"); - } -} -#endif - void reset_phy(void) { #ifdef CONFIG_LXT971_NO_SLEEP diff --git a/board/esd/hh405/Makefile b/board/esd/hh405/Makefile index ce7876c414..0e5e57a5ad 100644 --- a/board/esd/hh405/Makefile +++ b/board/esd/hh405/Makefile @@ -28,7 +28,10 @@ endif LIB = $(obj)lib$(BOARD).a -COBJS = $(BOARD).o flash.o ../common/misc.o ../common/auto_update.o +COBJS = $(BOARD).o flash.o \ + ../common/misc.o \ + ../common/esd405ep_nand.o \ + ../common/auto_update.o SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) OBJS := $(addprefix $(obj),$(COBJS)) diff --git a/board/esd/hh405/hh405.c b/board/esd/hh405/hh405.c index ea344c0f26..67b5d5406d 100644 --- a/board/esd/hh405/hh405.c +++ b/board/esd/hh405/hh405.c @@ -5,7 +5,7 @@ * (C) Copyright 2005 * Stefan Roese, DENX Software Engineering, sr@denx.de. * - * (C) Copyright 2006 + * (C) Copyright 2006-2007 * Matthias Fuchs, esd GmbH, matthias.fuchs@esd-electronics.com * * See file CREDITS for list of people who contributed to this @@ -477,12 +477,6 @@ int misc_init_r (void) out32(GPIO0_OR, in32(GPIO0_OR) | CFG_EEPROM_WP); /* - * Set NAND-FLASH GPIO signals to default - */ - out32(GPIO0_OR, in32(GPIO0_OR) & ~(CFG_NAND_CLE | CFG_NAND_ALE)); - out32(GPIO0_OR, in32(GPIO0_OR) | CFG_NAND_CE); - - /* * Reset touch-screen controller */ out32(GPIO0_OR, in32(GPIO0_OR) & ~CFG_TOUCH_RST); @@ -690,20 +684,6 @@ void ide_set_reset(int on) #endif /* CONFIG_IDE_RESET */ -#if (CONFIG_COMMANDS & CFG_CMD_NAND) -#include <linux/mtd/nand_legacy.h> -extern struct nand_chip nand_dev_desc[CFG_MAX_NAND_DEVICE]; - -void nand_init(void) -{ - nand_probe(CFG_NAND_BASE); - if (nand_dev_desc[0].ChipID != NAND_ChipID_UNKNOWN) { - print_size(nand_dev_desc[0].totlen, "\n"); - } -} -#endif - - #if defined(CFG_EEPROM_WREN) /* Input: <dev_addr> I2C address of EEPROM device to enable. * <state> -1: deliver current state diff --git a/board/esd/hub405/Makefile b/board/esd/hub405/Makefile index 4d75868ea8..308f752d09 100644 --- a/board/esd/hub405/Makefile +++ b/board/esd/hub405/Makefile @@ -28,7 +28,9 @@ endif LIB = $(obj)lib$(BOARD).a -COBJS = $(BOARD).o flash.o ../common/misc.o +COBJS = $(BOARD).o flash.o \ + ../common/misc.o \ + ../common/esd405ep_nand.o \ SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) OBJS := $(addprefix $(obj),$(COBJS)) diff --git a/board/esd/hub405/hub405.c b/board/esd/hub405/hub405.c index 1e0accbe0e..25c8068fde 100644 --- a/board/esd/hub405/hub405.c +++ b/board/esd/hub405/hub405.c @@ -153,12 +153,6 @@ int misc_init_r (void) out32(GPIO0_OR, val); /* - * Set NAND-FLASH GPIO signals to default - */ - out32(GPIO0_OR, in32(GPIO0_OR) & ~(CFG_NAND_CLE | CFG_NAND_ALE)); - out32(GPIO0_OR, in32(GPIO0_OR) | CFG_NAND_CE); - - /* * check board type and setup AP power */ str = getenv("bd_type"); /* this is only set on non prototype hardware */ @@ -242,33 +236,5 @@ long int initdram (int board_type) mtdcr(memcfga, mem_mb0cf); val = mfdcr(memcfgd); -#if 0 - printf("\nmb0cf=%x\n", val); /* test-only */ - printf("strap=%x\n", mfdcr(strap)); /* test-only */ -#endif - return (4*1024*1024 << ((val & 0x000e0000) >> 17)); } - - -int testdram (void) -{ - /* TODO: XXX XXX XXX */ - printf ("test: 16 MB - ok\n"); - - return (0); -} - - -#if (CONFIG_COMMANDS & CFG_CMD_NAND) -#include <linux/mtd/nand_legacy.h> -extern struct nand_chip nand_dev_desc[CFG_MAX_NAND_DEVICE]; - -void nand_init(void) -{ - nand_probe(CFG_NAND_BASE); - if (nand_dev_desc[0].ChipID != NAND_ChipID_UNKNOWN) { - print_size(nand_dev_desc[0].totlen, "\n"); - } -} -#endif diff --git a/board/esd/plu405/Makefile b/board/esd/plu405/Makefile index ce7876c414..0e5e57a5ad 100644 --- a/board/esd/plu405/Makefile +++ b/board/esd/plu405/Makefile @@ -28,7 +28,10 @@ endif LIB = $(obj)lib$(BOARD).a -COBJS = $(BOARD).o flash.o ../common/misc.o ../common/auto_update.o +COBJS = $(BOARD).o flash.o \ + ../common/misc.o \ + ../common/esd405ep_nand.o \ + ../common/auto_update.o SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) OBJS := $(addprefix $(obj),$(COBJS)) diff --git a/board/esd/plu405/plu405.c b/board/esd/plu405/plu405.c index 59171f8f4c..f026a7ac3b 100644 --- a/board/esd/plu405/plu405.c +++ b/board/esd/plu405/plu405.c @@ -23,6 +23,7 @@ #include <common.h> #include <asm/processor.h> +#include <asm/io.h> #include <command.h> #include <malloc.h> @@ -31,6 +32,8 @@ #define FPGA_DEBUG #endif +DECLARE_GLOBAL_DATA_PTR; + extern int do_reset (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]); extern void lxt971_no_sleep(void); @@ -114,6 +117,10 @@ int misc_init_r (void) int index; int i; + /* adjust flash start and offset */ + gd->bd->bi_flashstart = 0 - gd->bd->bi_flashsize; + gd->bd->bi_flashoffset = 0; + dst = malloc(CFG_FPGA_MAX_SIZE); if (gunzip (dst, CFG_FPGA_MAX_SIZE, (uchar *)fpgadata, &len) != 0) { printf ("GUNZIP ERROR - must RESET board to recover\n"); @@ -177,18 +184,12 @@ int misc_init_r (void) /* * Reset external DUARTs */ - out32(GPIO0_OR, in32(GPIO0_OR) | CFG_DUART_RST); /* set reset to high */ + out_be32((void *)GPIO0_OR, in_be32((void *)GPIO0_OR) | CFG_DUART_RST); udelay(10); /* wait 10us */ - out32(GPIO0_OR, in32(GPIO0_OR) & ~CFG_DUART_RST); /* set reset to low */ + out_be32((void *)GPIO0_OR, in_be32((void *)GPIO0_OR) & ~CFG_DUART_RST); udelay(1000); /* wait 1ms */ /* - * Set NAND-FLASH GPIO signals to default - */ - out32(GPIO0_OR, in32(GPIO0_OR) & ~(CFG_NAND_CLE | CFG_NAND_ALE)); - out32(GPIO0_OR, in32(GPIO0_OR) | CFG_NAND_CE); - - /* * Enable interrupts in exar duart mcr[3] */ *duart0_mcr = 0x08; @@ -226,24 +227,10 @@ long int initdram (int board_type) mtdcr(memcfga, mem_mb0cf); val = mfdcr(memcfgd); -#if 0 - printf("\nmb0cf=%x\n", val); /* test-only */ - printf("strap=%x\n", mfdcr(strap)); /* test-only */ -#endif - return (4*1024*1024 << ((val & 0x000e0000) >> 17)); } -int testdram (void) -{ - /* TODO: XXX XXX XXX */ - printf ("test: 16 MB - ok\n"); - - return (0); -} - - #ifdef CONFIG_IDE_RESET void ide_set_reset(int on) { @@ -262,31 +249,6 @@ void ide_set_reset(int on) #endif /* CONFIG_IDE_RESET */ -#if (CONFIG_COMMANDS & CFG_CMD_NAND) -#include <linux/mtd/nand_legacy.h> -extern struct nand_chip nand_dev_desc[CFG_MAX_NAND_DEVICE]; - -void nand_init(void) -{ - nand_probe(CFG_NAND_BASE); - if (nand_dev_desc[0].ChipID != NAND_ChipID_UNKNOWN) { - print_size(nand_dev_desc[0].totlen, "\n"); - } -} -#endif - - -#ifdef CONFIG_AUTO_UPDATE_SHOW -void board_auto_update_show(int au_active) -{ - if (au_active) { - printf("\n Dies ist die board-funktion: Updating!!!\n"); - } else { - printf("\n Dies ist die board-funktion: Updating done!!!\n"); - } -} -#endif - void reset_phy(void) { #ifdef CONFIG_LXT971_NO_SLEEP diff --git a/board/esd/voh405/Makefile b/board/esd/voh405/Makefile index 4d75868ea8..308f752d09 100644 --- a/board/esd/voh405/Makefile +++ b/board/esd/voh405/Makefile @@ -28,7 +28,9 @@ endif LIB = $(obj)lib$(BOARD).a -COBJS = $(BOARD).o flash.o ../common/misc.o +COBJS = $(BOARD).o flash.o \ + ../common/misc.o \ + ../common/esd405ep_nand.o \ SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) OBJS := $(addprefix $(obj),$(COBJS)) diff --git a/board/esd/voh405/voh405.c b/board/esd/voh405/voh405.c index 22995b5020..2857a0bef5 100644 --- a/board/esd/voh405/voh405.c +++ b/board/esd/voh405/voh405.c @@ -195,12 +195,6 @@ int misc_init_r (void) udelay(1000); /* wait 1ms */ /* - * Set NAND-FLASH GPIO signals to default - */ - out32(GPIO0_OR, in32(GPIO0_OR) & ~(CFG_NAND_CLE | CFG_NAND_ALE)); - out32(GPIO0_OR, in32(GPIO0_OR) | CFG_NAND_CE); - - /* * Enable interrupts in exar duart mcr[3] */ *duart0_mcr = 0x08; @@ -340,17 +334,3 @@ void ide_set_reset(int on) } } #endif /* CONFIG_IDE_RESET */ - - -#if (CONFIG_COMMANDS & CFG_CMD_NAND) -#include <linux/mtd/nand_legacy.h> -extern struct nand_chip nand_dev_desc[CFG_MAX_NAND_DEVICE]; - -void nand_init(void) -{ - nand_probe(CFG_NAND_BASE); - if (nand_dev_desc[0].ChipID != NAND_ChipID_UNKNOWN) { - print_size(nand_dev_desc[0].totlen, "\n"); - } -} -#endif diff --git a/board/esd/wuh405/Makefile b/board/esd/wuh405/Makefile index 4d75868ea8..308f752d09 100644 --- a/board/esd/wuh405/Makefile +++ b/board/esd/wuh405/Makefile @@ -28,7 +28,9 @@ endif LIB = $(obj)lib$(BOARD).a -COBJS = $(BOARD).o flash.o ../common/misc.o +COBJS = $(BOARD).o flash.o \ + ../common/misc.o \ + ../common/esd405ep_nand.o \ SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) OBJS := $(addprefix $(obj),$(COBJS)) diff --git a/board/esd/wuh405/wuh405.c b/board/esd/wuh405/wuh405.c index 5a1a3f3e8e..0b53062351 100644 --- a/board/esd/wuh405/wuh405.c +++ b/board/esd/wuh405/wuh405.c @@ -170,12 +170,6 @@ int misc_init_r (void) udelay(1000); /* wait 1ms */ /* - * Set NAND-FLASH GPIO signals to default - */ - out32(GPIO0_OR, in32(GPIO0_OR) & ~(CFG_NAND_CLE | CFG_NAND_ALE)); - out32(GPIO0_OR, in32(GPIO0_OR) | CFG_NAND_CE); - - /* * Enable interrupts in exar duart mcr[3] */ *duart0_mcr = 0x08; @@ -218,35 +212,8 @@ long int initdram (int board_type) mtdcr(memcfga, mem_mb0cf); val = mfdcr(memcfgd); -#if 0 - printf("\nmb0cf=%x\n", val); /* test-only */ - printf("strap=%x\n", mfdcr(strap)); /* test-only */ -#endif - return (4*1024*1024 << ((val & 0x000e0000) >> 17)); } /* ------------------------------------------------------------------------- */ -int testdram (void) -{ - /* TODO: XXX XXX XXX */ - printf ("test: 16 MB - ok\n"); - - return (0); -} - -/* ------------------------------------------------------------------------- */ - -#if (CONFIG_COMMANDS & CFG_CMD_NAND) -#include <linux/mtd/nand_legacy.h> -extern struct nand_chip nand_dev_desc[CFG_MAX_NAND_DEVICE]; - -void nand_init(void) -{ - nand_probe(CFG_NAND_BASE); - if (nand_dev_desc[0].ChipID != NAND_ChipID_UNKNOWN) { - print_size(nand_dev_desc[0].totlen, "\n"); - } -} -#endif |