summaryrefslogtreecommitdiff
path: root/board
diff options
context:
space:
mode:
Diffstat (limited to 'board')
-rw-r--r--board/prodrive/p3p440/Kconfig12
-rw-r--r--board/prodrive/p3p440/MAINTAINERS6
-rw-r--r--board/prodrive/p3p440/Makefile9
-rw-r--r--board/prodrive/p3p440/config.mk16
-rw-r--r--board/prodrive/p3p440/init.S38
-rw-r--r--board/prodrive/p3p440/p3p440.c177
-rw-r--r--board/prodrive/p3p440/p3p440.h24
7 files changed, 0 insertions, 282 deletions
diff --git a/board/prodrive/p3p440/Kconfig b/board/prodrive/p3p440/Kconfig
deleted file mode 100644
index cf53aac57b..0000000000
--- a/board/prodrive/p3p440/Kconfig
+++ /dev/null
@@ -1,12 +0,0 @@
-if TARGET_P3P440
-
-config SYS_BOARD
- default "p3p440"
-
-config SYS_VENDOR
- default "prodrive"
-
-config SYS_CONFIG_NAME
- default "p3p440"
-
-endif
diff --git a/board/prodrive/p3p440/MAINTAINERS b/board/prodrive/p3p440/MAINTAINERS
deleted file mode 100644
index 68fd1a98a0..0000000000
--- a/board/prodrive/p3p440/MAINTAINERS
+++ /dev/null
@@ -1,6 +0,0 @@
-P3P440 BOARD
-M: Stefan Roese <sr@denx.de>
-S: Maintained
-F: board/prodrive/p3p440/
-F: include/configs/p3p440.h
-F: configs/p3p440_defconfig
diff --git a/board/prodrive/p3p440/Makefile b/board/prodrive/p3p440/Makefile
deleted file mode 100644
index d62f75d3e7..0000000000
--- a/board/prodrive/p3p440/Makefile
+++ /dev/null
@@ -1,9 +0,0 @@
-#
-# (C) Copyright 2002-2006
-# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
-#
-# SPDX-License-Identifier: GPL-2.0+
-#
-
-obj-y = p3p440.o
-extra-y += init.o
diff --git a/board/prodrive/p3p440/config.mk b/board/prodrive/p3p440/config.mk
deleted file mode 100644
index f18b09710d..0000000000
--- a/board/prodrive/p3p440/config.mk
+++ /dev/null
@@ -1,16 +0,0 @@
-#
-# (C) Copyright 2002
-# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
-#
-# SPDX-License-Identifier: GPL-2.0+
-#
-
-PLATFORM_CPPFLAGS += -DCONFIG_440=1
-
-ifeq ($(debug),1)
-PLATFORM_CPPFLAGS += -DDEBUG
-endif
-
-ifeq ($(dbcr),1)
-PLATFORM_CPPFLAGS += -DCONFIG_SYS_INIT_DBCR=0x8cff0000
-endif
diff --git a/board/prodrive/p3p440/init.S b/board/prodrive/p3p440/init.S
deleted file mode 100644
index 35b1afab85..0000000000
--- a/board/prodrive/p3p440/init.S
+++ /dev/null
@@ -1,38 +0,0 @@
-/*
- * (C) Copyright 2005
- * Stefan Roese, DENX Software Engineering, sr@denx.de.
- *
- * Copyright (C) 2002 Scott McNutt <smcnutt@artesyncp.com>
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-
-#include <ppc_asm.tmpl>
-#include <asm/mmu.h>
-#include <config.h>
-#include <asm/ppc4xx.h>
-
-/**************************************************************************
- * TLB TABLE
- *
- * This table is used by the cpu boot code to setup the initial tlb
- * entries. Rather than make broad assumptions in the cpu source tree,
- * this table lets each board set things up however they like.
- *
- * Pointer to the table is returned in r1
- *
- *************************************************************************/
-
- .section .bootpg,"ax"
- .globl tlbtab
-
-tlbtab:
- tlbtab_start
- tlbentry( 0xf0000000, SZ_256M, 0xf0000000, 1, AC_RWX | SA_IG)
- tlbentry( CONFIG_SYS_PERIPHERAL_BASE, SZ_256M, 0x40000000, 1, AC_RW | SA_IG)
- tlbentry( CONFIG_SYS_ISRAM_BASE, SZ_4K, 0x80000000, 0, AC_RWX )
- tlbentry( CONFIG_SYS_ISRAM_BASE + 0x1000, SZ_4K, 0x80001000, 0, AC_RWX )
- tlbentry( CONFIG_SYS_SDRAM_BASE, SZ_256M, 0x00000000, 0, AC_RWX | SA_IG )
- tlbentry( CONFIG_SYS_PCI_BASE, SZ_256M, 0x00000000, 2, AC_RW | SA_IG )
- tlbentry( CONFIG_SYS_PCI_MEMBASE, SZ_256M, 0x00000000, 3, AC_RW | SA_IG )
- tlbtab_end
diff --git a/board/prodrive/p3p440/p3p440.c b/board/prodrive/p3p440/p3p440.c
deleted file mode 100644
index 929e8eb1a5..0000000000
--- a/board/prodrive/p3p440/p3p440.c
+++ /dev/null
@@ -1,177 +0,0 @@
-/*
- * (C) Copyright 2005
- * Stefan Roese, DENX Software Engineering, sr@denx.de.
- *
- * Copyright (C) 2002 Scott McNutt <smcnutt@artesyncp.com>
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-
-#include <common.h>
-#include <asm/processor.h>
-#include <command.h>
-
-#include "p3p440.h"
-
-DECLARE_GLOBAL_DATA_PTR;
-
-void set_led(int color)
-{
- switch (color) {
- case LED_OFF:
- out32(GPIO0_OR, in32(GPIO0_OR) & ~CONFIG_SYS_LED_GREEN & ~CONFIG_SYS_LED_RED);
- break;
-
- case LED_GREEN:
- out32(GPIO0_OR, (in32(GPIO0_OR) | CONFIG_SYS_LED_GREEN) & ~CONFIG_SYS_LED_RED);
- break;
-
- case LED_RED:
- out32(GPIO0_OR, (in32(GPIO0_OR) | CONFIG_SYS_LED_RED) & ~CONFIG_SYS_LED_GREEN);
- break;
-
- case LED_ORANGE:
- out32(GPIO0_OR, in32(GPIO0_OR) | CONFIG_SYS_LED_GREEN | CONFIG_SYS_LED_RED);
- break;
- }
-}
-
-static int is_monarch(void)
-{
- out32(GPIO0_OR, in32(GPIO0_OR) & ~CONFIG_SYS_GPIO_RDY);
- udelay(1000);
-
- if (in32(GPIO0_IR) & CONFIG_SYS_MONARCH_IO)
- return 0;
- else
- return 1;
-}
-
-static void wait_for_pci_ready(void)
-{
- /*
- * Configure EREADY_IO as input
- */
- out32(GPIO0_TCR, in32(GPIO0_TCR) & ~CONFIG_SYS_EREADY_IO);
- udelay(1000);
-
- for (;;) {
- if (in32(GPIO0_IR) & CONFIG_SYS_EREADY_IO)
- return;
- }
-
-}
-
-int board_early_init_f(void)
-{
- uint reg;
-
- /*--------------------------------------------------------------------
- * Setup the external bus controller/chip selects
- *-------------------------------------------------------------------*/
- mtdcr(EBC0_CFGADDR, EBC0_CFG);
- reg = mfdcr(EBC0_CFGDATA);
- mtdcr(EBC0_CFGDATA, reg | 0x04000000); /* Set ATC */
-
- /*--------------------------------------------------------------------
- * Setup pin multiplexing (GPIO/IRQ...)
- *-------------------------------------------------------------------*/
- mtdcr(CPC0_GPIO, 0x03F01F80);
-
- out32(GPIO0_ODR, 0x00000000); /* no open drain pins */
- out32(GPIO0_TCR, CONFIG_SYS_GPIO_RDY | CONFIG_SYS_EREADY_IO | CONFIG_SYS_LED_RED | CONFIG_SYS_LED_GREEN);
- out32(GPIO0_OR, CONFIG_SYS_GPIO_RDY);
-
- /*--------------------------------------------------------------------
- * Setup the interrupt controller polarities, triggers, etc.
- *-------------------------------------------------------------------*/
- mtdcr(UIC0SR, 0xffffffff); /* clear all */
- mtdcr(UIC0ER, 0x00000000); /* disable all */
- mtdcr(UIC0CR, 0x00000001); /* UIC1 crit is critical */
- mtdcr(UIC0PR, 0xfffffe13); /* per ref-board manual */
- mtdcr(UIC0TR, 0x01c00008); /* per ref-board manual */
- mtdcr(UIC0VR, 0x00000001); /* int31 highest, base=0x000 */
- mtdcr(UIC0SR, 0xffffffff); /* clear all */
-
- mtdcr(UIC1SR, 0xffffffff); /* clear all */
- mtdcr(UIC1ER, 0x00000000); /* disable all */
- mtdcr(UIC1CR, 0x00000000); /* all non-critical */
- mtdcr(UIC1PR, 0xffffe0ff); /* per ref-board manual */
- mtdcr(UIC1TR, 0x00ffc000); /* per ref-board manual */
- mtdcr(UIC1VR, 0x00000001); /* int31 highest, base=0x000 */
- mtdcr(UIC1SR, 0xffffffff); /* clear all */
-
- return 0;
-}
-
-int checkboard(void)
-{
- char buf[64];
- int i = getenv_f("serial#", buf, sizeof(buf));
-
- printf("Board: P3P440");
- if (i > 0) {
- puts(", serial# ");
- puts(buf);
- }
-
- if (is_monarch()) {
- puts(", Monarch");
- } else {
- puts(", None-Monarch");
- }
-
- putc('\n');
-
- return (0);
-}
-
-int misc_init_r (void)
-{
- /*
- * Adjust flash start and offset to detected values
- */
- gd->bd->bi_flashstart = 0 - gd->bd->bi_flashsize;
- gd->bd->bi_flashoffset = 0;
-
- /*
- * Check if only one FLASH bank is available
- */
- if (gd->bd->bi_flashsize != CONFIG_SYS_MAX_FLASH_BANKS * (0 - CONFIG_SYS_FLASH0)) {
- mtebc(PB1CR, 0); /* disable cs */
- mtebc(PB1AP, 0);
- mtebc(PB2CR, 0); /* disable cs */
- mtebc(PB2AP, 0);
- mtebc(PB3CR, 0); /* disable cs */
- mtebc(PB3AP, 0);
- }
-
- return 0;
-}
-
-/*************************************************************************
- * Override weak is_pci_host()
- *
- * This routine is called to determine if a pci scan should be
- * performed. With various hardware environments (especially cPCI and
- * PPMC) it's insufficient to depend on the state of the arbiter enable
- * bit in the strap register, or generic host/adapter assumptions.
- *
- * Rather than hard-code a bad assumption in the general 440 code, the
- * 440 pci code requires the board to decide at runtime.
- *
- * Return 0 for adapter mode, non-zero for host (monarch) mode.
- *
- *
- ************************************************************************/
-#if defined(CONFIG_PCI)
-int is_pci_host(struct pci_controller *hose)
-{
- if (is_monarch()) {
- wait_for_pci_ready();
- return 1; /* return 1 for host controller */
- } else {
- return 0; /* return 0 for adapter controller */
- }
-}
-#endif /* defined(CONFIG_PCI) */
diff --git a/board/prodrive/p3p440/p3p440.h b/board/prodrive/p3p440/p3p440.h
deleted file mode 100644
index a164f95feb..0000000000
--- a/board/prodrive/p3p440/p3p440.h
+++ /dev/null
@@ -1,24 +0,0 @@
-/*
- * (C) Copyright 2005
- * Stefan Roese, DENX Software Engineering, sr@denx.de.
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-
-#ifndef __P3P440_H__
-#define __P3P440_H__
-
-#define CONFIG_SYS_GPIO_RDY (0x80000000 >> 11)
-#define CONFIG_SYS_MONARCH_IO (0x80000000 >> 18)
-#define CONFIG_SYS_EREADY_IO (0x80000000 >> 20)
-#define CONFIG_SYS_LED_GREEN (0x80000000 >> 21)
-#define CONFIG_SYS_LED_RED (0x80000000 >> 22)
-
-#define LED_OFF 1
-#define LED_GREEN 2
-#define LED_RED 3
-#define LED_ORANGE 4
-
-long int fixed_sdram(void);
-
-#endif /* __P3P440_H__ */
generated by cgit (git 2.34.1) at 2024-12-27 08:37:17 +0000