17 files changed, 1046 insertions, 19 deletions
diff --git a/board/freescale/imx8qxp_mek/Kconfig b/board/freescale/imx8qxp_mek/Kconfig
new file mode 100644
index 0000000000..b67300d816
--- /dev/null
+++ b/board/freescale/imx8qxp_mek/Kconfig
@@ -0,0 +1,14 @@
+if TARGET_IMX8QXP_MEK
+
+config SYS_BOARD
+	default "imx8qxp_mek"
+
+config SYS_VENDOR
+	default "freescale"
+
+config SYS_CONFIG_NAME
+	default "imx8qxp_mek"
+
+source "board/freescale/common/Kconfig"
+
+endif
diff --git a/board/freescale/imx8qxp_mek/MAINTAINERS b/board/freescale/imx8qxp_mek/MAINTAINERS
new file mode 100644
index 0000000000..e9bf0b35a3
--- /dev/null
+++ b/board/freescale/imx8qxp_mek/MAINTAINERS
@@ -0,0 +1,6 @@
+i.MX8QXP MEK BOARD
+M:	Peng Fan <peng.fan@nxp.com>
+S:	Maintained
+F:	board/freescale/imx8qxp_mek/
+F:	include/configs/imx8qxp_mek.h
+F:	configs/imx8qxp_mek_defconfig
diff --git a/board/freescale/imx8qxp_mek/Makefile b/board/freescale/imx8qxp_mek/Makefile
new file mode 100644
index 0000000000..f9ee8aeff3
--- /dev/null
+++ b/board/freescale/imx8qxp_mek/Makefile
@@ -0,0 +1,7 @@
+#
+# Copyright 2017 NXP
+#
+# SPDX-License-Identifier:	GPL-2.0+
+#
+
+obj-y += imx8qxp_mek.o
diff --git a/board/freescale/imx8qxp_mek/README b/board/freescale/imx8qxp_mek/README
new file mode 100644
index 0000000000..e91e193d11
--- /dev/null
+++ b/board/freescale/imx8qxp_mek/README
@@ -0,0 +1,55 @@
+U-Boot for the NXP i.MX8QXP EVK board
+
+Quick Start
+===========
+
+- Build the ARM Trusted firmware binary
+- Get scfw_tcm.bin and ahab-container.img
+- Build U-Boot
+- Flash the binary into the SD card
+- Boot
+
+Get and Build the ARM Trusted firmware
+======================================
+
+$ git clone https://source.codeaurora.org/external/imx/imx-atf
+$ cd imx-atf/
+$ git checkout origin/imx_4.9.88_imx8qxp_beta2 -b imx_4.9.88_imx8qxp_beta2
+$ make PLAT=imx8qxp bl31
+
+Get scfw_tcm.bin and ahab-container.img
+==============================
+
+$ wget https://www.nxp.com/lgfiles/NMG/MAD/YOCTO/imx-sc-firmware-0.7.bin
+$ chmod +x imx-sc-firmware-0.7.bin
+$ ./imx-sc-firmware-0.7.bin
+$ wget https://www.nxp.com/lgfiles/NMG/MAD/YOCTO/firmware-imx-7.6.bin
+$ chmod +x firmware-imx-7.6.bin
+$ ./firmware-imx-7.6.bin
+
+Copy the following binaries to U-Boot folder:
+
+$ cp imx-atf/build/imx8qxp/release/bl31.bin .
+$ cp u-boot/u-boot.bin .
+
+Copy the following firmwares U-Boot folder :
+
+$ cp firmware-imx-7.6/firmware/seco/ahab-container.img .
+$ cp imx-sc-firmware-0.7/mx8qx-mek-scfw-tcm.bin	.
+
+Build U-Boot
+============
+
+$ make imx8qxp_mek_defconfig
+$ make
+
+Flash the binary into the SD card
+=================================
+
+Burn the flash.bin binary to SD card offset 32KB:
+
+$ sudo dd if=u-boot-dtb.imx of=/dev/sd[x] bs=1024 seek=32
+
+Boot
+====
+Set Boot switch SW2: 1100.
diff --git a/board/freescale/imx8qxp_mek/imx8qxp_mek.c b/board/freescale/imx8qxp_mek/imx8qxp_mek.c
new file mode 100644
index 0000000000..a4c587a390
--- /dev/null
+++ b/board/freescale/imx8qxp_mek/imx8qxp_mek.c
@@ -0,0 +1,170 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright 2018 NXP
+ */
+
+#include <common.h>
+#include <errno.h>
+#include <linux/libfdt.h>
+#include <environment.h>
+#include <fsl_esdhc.h>
+#include <asm/io.h>
+#include <asm/gpio.h>
+#include <asm/arch/clock.h>
+#include <asm/arch/sci/sci.h>
+#include <asm/arch/imx8-pins.h>
+#include <asm/arch/iomux.h>
+#include <asm/arch/sys_proto.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+#define GPIO_PAD_CTRL	((SC_PAD_CONFIG_NORMAL << PADRING_CONFIG_SHIFT) | \
+			 (SC_PAD_ISO_OFF << PADRING_LPCONFIG_SHIFT) | \
+			 (SC_PAD_28FDSOI_DSE_DV_HIGH << PADRING_DSE_SHIFT) | \
+			 (SC_PAD_28FDSOI_PS_PU << PADRING_PULL_SHIFT))
+
+#define UART_PAD_CTRL	((SC_PAD_CONFIG_OUT_IN << PADRING_CONFIG_SHIFT) | \
+			 (SC_PAD_ISO_OFF << PADRING_LPCONFIG_SHIFT) | \
+			 (SC_PAD_28FDSOI_DSE_DV_HIGH << PADRING_DSE_SHIFT) | \
+			 (SC_PAD_28FDSOI_PS_PU << PADRING_PULL_SHIFT))
+
+static iomux_cfg_t uart0_pads[] = {
+	SC_P_UART0_RX | MUX_PAD_CTRL(UART_PAD_CTRL),
+	SC_P_UART0_TX | MUX_PAD_CTRL(UART_PAD_CTRL),
+};
+
+static void setup_iomux_uart(void)
+{
+	imx8_iomux_setup_multiple_pads(uart0_pads, ARRAY_SIZE(uart0_pads));
+}
+
+int board_early_init_f(void)
+{
+	int ret;
+	/* Set UART0 clock root to 80 MHz */
+	sc_pm_clock_rate_t rate = 80000000;
+
+	/* Power up UART0 */
+	ret = sc_pm_set_resource_power_mode(-1, SC_R_UART_0, SC_PM_PW_MODE_ON);
+	if (ret)
+		return ret;
+
+	ret = sc_pm_set_clock_rate(-1, SC_R_UART_0, 2, &rate);
+	if (ret)
+		return ret;
+
+	/* Enable UART0 clock root */
+	ret = sc_pm_clock_enable(-1, SC_R_UART_0, 2, true, false);
+	if (ret)
+		return ret;
+
+	setup_iomux_uart();
+
+	return 0;
+}
+
+#if IS_ENABLED(CONFIG_DM_GPIO)
+static void board_gpio_init(void)
+{
+	struct gpio_desc desc;
+	int ret;
+
+	ret = dm_gpio_lookup_name("gpio@1a_3", &desc);
+	if (ret)
+		return;
+
+	ret = dm_gpio_request(&desc, "bb_per_rst_b");
+	if (ret)
+		return;
+
+	dm_gpio_set_dir_flags(&desc, GPIOD_IS_OUT);
+	dm_gpio_set_value(&desc, 0);
+	udelay(50);
+	dm_gpio_set_value(&desc, 1);
+}
+#else
+static inline void board_gpio_init(void) {}
+#endif
+
+#if IS_ENABLED(CONFIG_FEC_MXC)
+#include <miiphy.h>
+
+int board_phy_config(struct phy_device *phydev)
+{
+	phy_write(phydev, MDIO_DEVAD_NONE, 0x1d, 0x1f);
+	phy_write(phydev, MDIO_DEVAD_NONE, 0x1e, 0x8);
+
+	phy_write(phydev, MDIO_DEVAD_NONE, 0x1d, 0x05);
+	phy_write(phydev, MDIO_DEVAD_NONE, 0x1e, 0x100);
+
+	if (phydev->drv->config)
+		phydev->drv->config(phydev);
+
+	return 0;
+}
+#endif
+
+void build_info(void)
+{
+	u32 sc_build = 0, sc_commit = 0;
+
+	/* Get SCFW build and commit id */
+	sc_misc_build_info(-1, &sc_build, &sc_commit);
+	if (!sc_build) {
+		printf("SCFW does not support build info\n");
+		sc_commit = 0; /* Display 0 when the build info is not supported*/
+	}
+	printf("Build: SCFW %x\n", sc_commit);
+}
+
+int checkboard(void)
+{
+	puts("Board: iMX8QXP MEK\n");
+
+	build_info();
+	print_bootinfo();
+
+	return 0;
+}
+
+int board_init(void)
+{
+	board_gpio_init();
+
+	return 0;
+}
+
+void detail_board_ddr_info(void)
+{
+	puts("\nDDR    ");
+}
+
+/*
+ * Board specific reset that is system reset.
+ */
+void reset_cpu(ulong addr)
+{
+	/* TODO */
+}
+
+#ifdef CONFIG_OF_BOARD_SETUP
+int ft_board_setup(void *blob, bd_t *bd)
+{
+	return 0;
+}
+#endif
+
+int board_mmc_get_env_dev(int devno)
+{
+	return devno;
+}
+
+int board_late_init(void)
+{
+#ifdef CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG
+	env_set("board_name", "MEK");
+	env_set("board_rev", "iMX8QXP");
+#endif
+
+	return 0;
+}
diff --git a/board/freescale/imx8qxp_mek/imximage.cfg b/board/freescale/imx8qxp_mek/imximage.cfg
new file mode 100644
index 0000000000..9d39f25bf6
--- /dev/null
+++ b/board/freescale/imx8qxp_mek/imximage.cfg
@@ -0,0 +1,25 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Copyright 2018 NXP
+ *
+ * Refer doc/README.imx8image for more details about how-to configure
+ * and create imx8image boot image
+ */
+
+#define __ASSEMBLY__
+#include <config.h>
+
+/* Boot from SD, sector size 0x400 */
+BOOT_FROM SD 0x400
+/* SoC type IMX8QX */
+SOC_TYPE IMX8QX
+/* Append seco container image */
+APPEND ahab-container.img
+/* Create the 2nd container */
+CONTAINER
+/* Add scfw image with exec attribute */
+IMAGE SCU mx8qx-mek-scfw-tcm.bin
+/* Add ATF image with exec attribute */
+IMAGE A35 bl31.bin 0x80000000
+/* Add U-Boot image with load attribute */
+DATA A35 u-boot-dtb.bin 0x80020000
diff --git a/board/freescale/mx8mq_evk/README b/board/freescale/mx8mq_evk/README
new file mode 100644
index 0000000000..cd7e67eec5
--- /dev/null
+++ b/board/freescale/mx8mq_evk/README
@@ -0,0 +1,81 @@
+U-Boot for the NXP i.MX8MQ EVK board
+
+Quick Start
+===========
+
+- Build U-Boot
+- Build the ARM Trusted firmware binary
+- Get DDR firmware and mkimage tool
+- Generate flash.bin using imx-mkimage
+- Flash the binary into the SD card
+- Boot
+
+Build U-Boot
+============
+
+$ make mx8mq_evk_defconfig
+$ make
+
+Get and Build the ARM Trusted firmware
+======================================
+
+$ git clone https://source.codeaurora.org/external/imx/imx-atf
+$ cd imx-atf/
+$ git checkout origin/imx_4.9.51_imx8m_beta
+$ make PLAT=imx8mq bl31
+
+Get the DDR firmware and mkimage tool
+==============================
+
+$ wget https://www.nxp.com/lgfiles/NMG/MAD/YOCTO/firmware-imx-7.2.bin
+$ chmod +x firmware-imx-7.2.bin
+$ ./firmware-imx-7.2.bin
+
+Download the imx-mkimage tool:
+
+$ git clone https://source.codeaurora.org/external/imx/imx-mkimage/
+$ cd imx-mkimage/
+$ git checkout origin/imx_4.9.51_imx8m_beta
+
+
+Generate flash.bin using imx-mkimage
+====================================
+
+Copy the following binaries to imx-mkimage/iMX8M folder:
+
+$ cp imx-atf/build/imx8mq/release/bl31.bin imx-mkimage/iMX8M/
+$ cp u-boot/u-boot-nodtb.bin imx-mkimage/iMX8M/
+$ cp u-boot/spl/u-boot-spl.bin imx-mkimage/iMX8M/
+$ cp u-boot/arch/arm/dts/fsl-imx8mq-evk.dtb imx-mkimage/iMX8M/
+
+Copy the following firmwares to imx-mkimage/iMX8 folder :
+
+$ cp firmware-imx-7.2/firmware/ddr/synopsys/lpddr4_pmu_train_1d_dmem.bin imx-mkimage/iMX8M/
+$ cp firmware-imx-7.2/firmware/ddr/synopsys/lpddr4_pmu_train_1d_imem.bin imx-mkimage/iMX8M/
+$ cp firmware-imx-7.2/firmware/ddr/synopsys/lpddr4_pmu_train_2d_dmem.bin imx-mkimage/iMX8M/
+$ cp firmware-imx-7.2/firmware/ddr/synopsys/lpddr4_pmu_train_2d_imem.bin imx-mkimage/iMX8M/
+
+If you want to run with HDMI, copy signed_hdmi_imx8m.bin to imx-mkimage/iMX8M.
+
+Before generating the flash.bin, transfer the mkimage generated by U-Boot to iMX8M folder:
+
+$ cp u-boot/tools/mkimage imx-mkimage/iMX8M/
+$ mv imx-mkimage/iMX8M/mkimage imx-mkimage/iMX8M/mkimage_uboot
+
+$ cd imx-mkimage/
+$ make SOC=iMX8M flash_spl_uboot
+
+Or for using HDMI:
+
+$ make SOC=iMX8M flash_hdmi_spl_uboot
+
+Flash the binary into the SD card
+=================================
+
+Burn the flash.bin binary to SD card offset 33KB:
+
+$ sudo dd if=iMX8M/flash.bin of=/dev/sd[x] bs=1024 seek=33
+
+Boot
+====
+Set Boot switch SW801: 1100 and Bmode: 10 to boot from Micro SD.
diff --git a/board/ge/bx50v3/MAINTAINERS b/board/ge/bx50v3/MAINTAINERS
index a44edd4c89..91d5c86013 100644
--- a/board/ge/bx50v3/MAINTAINERS
+++ b/board/ge/bx50v3/MAINTAINERS
@@ -1,5 +1,5 @@
 GE_BX50V3 BOARD
-M:	Martin Donnelly <martin.donnelly@ge.com>
+M:	Ian Ray <ian.ray@ge.com>
 S:	Maintained
 F:	board/ge/bx50v3/
 F:	include/configs/ge_bx50v3.h
diff --git a/board/ge/bx50v3/bx50v3.c b/board/ge/bx50v3/bx50v3.c
index b2d065c1b8..245852510f 100644
--- a/board/ge/bx50v3/bx50v3.c
+++ b/board/ge/bx50v3/bx50v3.c
@@ -426,14 +426,22 @@ static void enable_videopll(void)
 
 	setbits_le32(&ccm->analog_pll_video, BM_ANADIG_PLL_VIDEO_POWERDOWN);
 
-	/* set video pll to 910MHz (24MHz * (37+11/12))
-	* video pll post div to 910/4 = 227.5MHz
-	*/
+	/* PLL_VIDEO  455MHz (24MHz * (37+11/12) / 2)
+	 *   |
+	 * PLL5
+	 *   |
+	 * CS2CDR[LDB_DI0_CLK_SEL]
+	 *   |
+	 *   +----> LDB_DI0_SERIAL_CLK_ROOT
+	 *   |
+	 *   +--> CSCMR2[LDB_DI0_IPU_DIV] --> LDB_DI0_IPU  455 / 7 = 65 MHz
+	 */
+
 	clrsetbits_le32(&ccm->analog_pll_video,
 			BM_ANADIG_PLL_VIDEO_DIV_SELECT |
 			BM_ANADIG_PLL_VIDEO_POST_DIV_SELECT,
 			BF_ANADIG_PLL_VIDEO_DIV_SELECT(37) |
-			BF_ANADIG_PLL_VIDEO_POST_DIV_SELECT(0));
+			BF_ANADIG_PLL_VIDEO_POST_DIV_SELECT(1));
 
 	writel(BF_ANADIG_PLL_VIDEO_NUM_A(11), &ccm->analog_pll_video_num);
 	writel(BF_ANADIG_PLL_VIDEO_DENOM_B(12), &ccm->analog_pll_video_denom);
@@ -459,8 +467,8 @@ static void setup_display_b850v3(void)
 
 	enable_videopll();
 
-	/* IPU1 D0 clock is 227.5 / 3.5 = 65MHz */
-	clrbits_le32(&mxc_ccm->cscmr2, MXC_CCM_CSCMR2_LDB_DI0_IPU_DIV);
+	/* IPU1 DI0 clock is 455MHz / 7 = 65MHz */
+	setbits_le32(&mxc_ccm->cscmr2, MXC_CCM_CSCMR2_LDB_DI0_IPU_DIV);
 
 	imx_setup_hdmi();
 
@@ -507,7 +515,7 @@ static void setup_display_bx50v3(void)
 	 */
 	mdelay(200);
 
-	/* IPU1 DI0 clock is 480/7 = 68.5 MHz */
+	/* IPU1 DI0 clock is 455MHz / 7 = 65MHz */
 	setbits_le32(&mxc_ccm->cscmr2, MXC_CCM_CSCMR2_LDB_DI0_IPU_DIV);
 
 	/* Set LDB_DI0 as clock source for IPU_DI0 */
@@ -683,12 +691,8 @@ int board_early_init_f(void)
 	setup_iomux_uart();
 
 #if defined(CONFIG_VIDEO_IPUV3)
-	if (is_b850v3())
-		/* Set LDB clock to Video PLL */
-		select_ldb_di_clock_source(MXC_PLL5_CLK);
-	else
-		/* Set LDB clock to USB PLL */
-		select_ldb_di_clock_source(MXC_PLL3_SW_CLK);
+	/* Set LDB clock to Video PLL */
+	select_ldb_di_clock_source(MXC_PLL5_CLK);
 #endif
 	return 0;
 }
@@ -710,9 +714,9 @@ static void set_confidx(const struct vpd_cache* vpd)
 
 int board_init(void)
 {
-	setup_i2c(1, CONFIG_SYS_I2C_SPEED, 0x7f, &i2c_pad_info1);
-	setup_i2c(2, CONFIG_SYS_I2C_SPEED, 0x7f, &i2c_pad_info2);
-	setup_i2c(3, CONFIG_SYS_I2C_SPEED, 0x7f, &i2c_pad_info3);
+	setup_i2c(0, CONFIG_SYS_I2C_SPEED, 0x7f, &i2c_pad_info1);
+	setup_i2c(1, CONFIG_SYS_I2C_SPEED, 0x7f, &i2c_pad_info2);
+	setup_i2c(2, CONFIG_SYS_I2C_SPEED, 0x7f, &i2c_pad_info3);
 
 	read_vpd(CONFIG_SYS_I2C_EEPROM_BUS);
 
@@ -805,6 +809,8 @@ int board_late_init(void)
 
 	if (is_b850v3())
 		env_set("videoargs", "video=DP-1:1024x768@60 video=HDMI-A-1:1024x768@60");
+	else
+		env_set("videoargs", "video=LVDS-1:1024x768@65");
 
 	/* board specific pmic init */
 	pmic_init();
diff --git a/board/menlo/m53menlo/Kconfig b/board/menlo/m53menlo/Kconfig
new file mode 100644
index 0000000000..1953f5041b
--- /dev/null
+++ b/board/menlo/m53menlo/Kconfig
@@ -0,0 +1,15 @@
+if TARGET_M53MENLO
+
+config SYS_BOARD
+	default "m53menlo"
+
+config SYS_VENDOR
+	default "menlo"
+
+config SYS_SOC
+	default "mx5"
+
+config SYS_CONFIG_NAME
+	default "m53menlo"
+
+endif
diff --git a/board/menlo/m53menlo/MAINTAINERS b/board/menlo/m53menlo/MAINTAINERS
new file mode 100644
index 0000000000..7b78340060
--- /dev/null
+++ b/board/menlo/m53menlo/MAINTAINERS
@@ -0,0 +1,7 @@
+M53MENLO BOARD
+M:	Marek Vasut <marex@denx.de>
+M:	Olaf Mandel <o.mandel@menlosystems.com>
+S:	Maintained
+F:	board/menlo/m53menlo/
+F:	include/configs/m53menlo.h
+F:	configs/m53menlo_defconfig
diff --git a/board/menlo/m53menlo/Makefile b/board/menlo/m53menlo/Makefile
new file mode 100644
index 0000000000..b4ab95a568
--- /dev/null
+++ b/board/menlo/m53menlo/Makefile
@@ -0,0 +1,9 @@
+#
+# Menlosystems M53Menlo
+# Copyright (C) 2012-2017 Marek Vasut <marex@denx.de>
+# Copyright (C) 2014-2017 Olaf Mandel <o.mandel@menlosystems.com>
+#
+# SPDX-License-Identifier:	GPL-2.0+
+#
+
+obj-y	:= m53menlo.o
diff --git a/board/menlo/m53menlo/imximage.cfg b/board/menlo/m53menlo/imximage.cfg
new file mode 100644
index 0000000000..68b3eb5c1c
--- /dev/null
+++ b/board/menlo/m53menlo/imximage.cfg
@@ -0,0 +1,91 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * M53 DRAM init values
+ * Copyright (C) 2012-2013 Marek Vasut <marex@denx.de>
+ *
+ * Refer doc/README.imximage for more details about how-to configure
+ * and create imximage boot image
+ *
+ * The syntax is taken as close as possible with the kwbimage
+ */
+#include <asm/mach-imx/imximage.cfg>
+
+/* image version */
+IMAGE_VERSION	2
+
+
+/* Boot Offset 0x400, valid for both SD and NAND boot. */
+BOOT_OFFSET	FLASH_OFFSET_STANDARD
+
+/*
+ * Device Configuration Data (DCD)
+ *
+ * Each entry must have the format:
+ * Addr-type           Address        Value
+ *
+ * where:
+ *	Addr-type register length (1,2 or 4 bytes)
+ *	Address	  absolute address of the register
+ *	value	  value to be stored in the register
+ */
+DATA 4 0x53fa86f4 0x00000000	 /* GRP_DDRMODE_CTL */
+DATA 4 0x53fa8714 0x00000000	 /* GRP_DDRMODE */
+DATA 4 0x53fa86fc 0x00000000	 /* GRP_DDRPKE */
+DATA 4 0x53fa8724 0x04000000	 /* GRP_DDR_TYPE */
+
+DATA 4 0x53fa872c 0x00300000	 /* GRP_B3DS */
+DATA 4 0x53fa8554 0x00300000	 /* DRAM_DQM3 */
+DATA 4 0x53fa8558 0x00300040	 /* DRAM_SDQS3 */
+
+DATA 4 0x53fa8728 0x00300000	 /* GRP_B2DS */
+DATA 4 0x53fa8560 0x00300000	 /* DRAM_DQM2 */
+DATA 4 0x53fa8568 0x00300040	 /* DRAM_SDQS2 */
+
+DATA 4 0x53fa871c 0x00300000	 /* GRP_B1DS */
+DATA 4 0x53fa8594 0x00300000	 /* DRAM_DQM1 */
+DATA 4 0x53fa8590 0x00300040	 /* DRAM_SDQS1 */
+
+DATA 4 0x53fa8718 0x00300000	 /* GRP_B0DS */
+DATA 4 0x53fa8584 0x00300000	 /* DRAM_DQM0 */
+DATA 4 0x53fa857c 0x00300040	 /* DRAM_SDQS0 */
+
+DATA 4 0x53fa8578 0x00300000	 /* DRAM_SDCLK_0 */
+DATA 4 0x53fa8570 0x00300000	 /* DRAM_SDCLK_1 */
+
+DATA 4 0x53fa8574 0x00300000	 /* DRAM_CAS */
+DATA 4 0x53fa8588 0x00300000	 /* DRAM_RAS */
+DATA 4 0x53fa86f0 0x00300000	 /* GRP_ADDDS */
+DATA 4 0x53fa8720 0x00300000	 /* GRP_CTLDS */
+
+DATA 4 0x53fa8564 0x00300040	 /* DRAM_SDODT1 */
+DATA 4 0x53fa8580 0x00300040	 /* DRAM_SDODT0 */
+
+/* ESDCTL */
+DATA 4 0x63fd9088 0x32383535
+DATA 4 0x63fd9090 0x40383538
+DATA 4 0x63fd907c 0x0136014d
+DATA 4 0x63fd9080 0x01510141
+
+DATA 4 0x63fd9018 0x00011740
+DATA 4 0x63fd9000 0xc3190000
+DATA 4 0x63fd900c 0x555952e3
+DATA 4 0x63fd9010 0xb68e8b63
+DATA 4 0x63fd9014 0x01ff00db
+DATA 4 0x63fd902c 0x000026d2
+DATA 4 0x63fd9030 0x009f0e21
+DATA 4 0x63fd9008 0x12273030
+DATA 4 0x63fd9004 0x0002002d
+DATA 4 0x63fd901c 0x00008032
+DATA 4 0x63fd901c 0x00008033
+DATA 4 0x63fd901c 0x00028031
+DATA 4 0x63fd901c 0x092080b0
+DATA 4 0x63fd901c 0x04008040
+DATA 4 0x63fd901c 0x0000803a
+DATA 4 0x63fd901c 0x0000803b
+DATA 4 0x63fd901c 0x00028039
+DATA 4 0x63fd901c 0x09208138
+DATA 4 0x63fd901c 0x04008048
+DATA 4 0x63fd9020 0x00001800
+DATA 4 0x63fd9040 0x04b80003
+DATA 4 0x63fd9058 0x00022227
+DATA 4 0x63fd901c 0x00000000
diff --git a/board/menlo/m53menlo/m53menlo.c b/board/menlo/m53menlo/m53menlo.c
new file mode 100644
index 0000000000..6bdd6d5b23
--- /dev/null
+++ b/board/menlo/m53menlo/m53menlo.c
@@ -0,0 +1,513 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Menlosystems M53Menlo board
+ *
+ * Copyright (C) 2012-2017 Marek Vasut <marex@denx.de>
+ * Copyright (C) 2014-2017 Olaf Mandel <o.mandel@menlosystems.com>
+ */
+
+#include <common.h>
+#include <asm/io.h>
+#include <asm/arch/imx-regs.h>
+#include <asm/arch/sys_proto.h>
+#include <asm/arch/crm_regs.h>
+#include <asm/arch/clock.h>
+#include <asm/arch/iomux-mx53.h>
+#include <asm/mach-imx/mx5_video.h>
+#include <asm/mach-imx/video.h>
+#include <asm/gpio.h>
+#include <asm/spl.h>
+#include <fdt_support.h>
+#include <fsl_esdhc.h>
+#include <i2c.h>
+#include <ipu_pixfmt.h>
+#include <linux/errno.h>
+#include <linux/fb.h>
+#include <mmc.h>
+#include <netdev.h>
+#include <spl.h>
+#include <splash.h>
+#include <usb/ehci-ci.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+static u32 mx53_dram_size[2];
+
+ulong board_get_usable_ram_top(ulong total_size)
+{
+	/*
+	 * WARNING: We must override get_effective_memsize() function here
+	 * to report only the size of the first DRAM bank. This is to make
+	 * U-Boot relocator place U-Boot into valid memory, that is, at the
+	 * end of the first DRAM bank. If we did not override this function
+	 * like so, U-Boot would be placed at the address of the first DRAM
+	 * bank + total DRAM size - sizeof(uboot), which in the setup where
+	 * each DRAM bank contains 512MiB of DRAM would result in placing
+	 * U-Boot into invalid memory area close to the end of the first
+	 * DRAM bank.
+	 */
+	return PHYS_SDRAM_2 + mx53_dram_size[1];
+}
+
+int dram_init(void)
+{
+	mx53_dram_size[0] = get_ram_size((void *)PHYS_SDRAM_1, 1 << 30);
+	mx53_dram_size[1] = get_ram_size((void *)PHYS_SDRAM_2, 1 << 30);
+
+	gd->ram_size = mx53_dram_size[0] + mx53_dram_size[1];
+
+	return 0;
+}
+
+int dram_init_banksize(void)
+{
+	gd->bd->bi_dram[0].start = PHYS_SDRAM_1;
+	gd->bd->bi_dram[0].size = mx53_dram_size[0];
+
+	gd->bd->bi_dram[1].start = PHYS_SDRAM_2;
+	gd->bd->bi_dram[1].size = mx53_dram_size[1];
+
+	return 0;
+}
+
+static void setup_iomux_uart(void)
+{
+	static const iomux_v3_cfg_t uart_pads[] = {
+		MX53_PAD_PATA_DMACK__UART1_RXD_MUX,
+		MX53_PAD_PATA_DIOW__UART1_TXD_MUX,
+	};
+
+	imx_iomux_v3_setup_multiple_pads(uart_pads, ARRAY_SIZE(uart_pads));
+}
+
+#ifdef CONFIG_USB_EHCI_MX5
+int board_ehci_hcd_init(int port)
+{
+	if (port == 0) {
+		/* USB OTG PWRON */
+		imx_iomux_v3_setup_pad(NEW_PAD_CTRL(MX53_PAD_GPIO_4__GPIO1_4,
+						    PAD_CTL_PKE |
+						    PAD_CTL_DSE_HIGH));
+		gpio_direction_output(IMX_GPIO_NR(1, 4), 0);
+
+		/* USB OTG Over Current */
+		imx_iomux_v3_setup_pad(MX53_PAD_GPIO_18__GPIO7_13);
+	} else if (port == 1) {
+		/* USB Host PWRON */
+		imx_iomux_v3_setup_pad(NEW_PAD_CTRL(MX53_PAD_GPIO_2__GPIO1_2,
+						    PAD_CTL_PKE |
+						    PAD_CTL_DSE_HIGH));
+		gpio_direction_output(IMX_GPIO_NR(1, 2), 0);
+
+		/* USB Host Over Current */
+		imx_iomux_v3_setup_pad(MX53_PAD_GPIO_3__USBOH3_USBH1_OC);
+	}
+
+	return 0;
+}
+#endif
+
+static void setup_iomux_fec(void)
+{
+	static const iomux_v3_cfg_t fec_pads[] = {
+		/* MDIO pads */
+		NEW_PAD_CTRL(MX53_PAD_FEC_MDIO__FEC_MDIO, PAD_CTL_HYS |
+			PAD_CTL_DSE_HIGH | PAD_CTL_PUS_22K_UP | PAD_CTL_ODE),
+		NEW_PAD_CTRL(MX53_PAD_FEC_MDC__FEC_MDC, PAD_CTL_DSE_HIGH),
+
+		/* FEC 0 pads */
+		NEW_PAD_CTRL(MX53_PAD_FEC_CRS_DV__FEC_RX_DV,
+			     PAD_CTL_HYS | PAD_CTL_PKE),
+		NEW_PAD_CTRL(MX53_PAD_FEC_REF_CLK__FEC_TX_CLK,
+			     PAD_CTL_HYS | PAD_CTL_PKE),
+		NEW_PAD_CTRL(MX53_PAD_FEC_RX_ER__FEC_RX_ER,
+			     PAD_CTL_HYS | PAD_CTL_PKE),
+		NEW_PAD_CTRL(MX53_PAD_FEC_TX_EN__FEC_TX_EN, PAD_CTL_DSE_HIGH),
+		NEW_PAD_CTRL(MX53_PAD_FEC_RXD0__FEC_RDATA_0,
+			     PAD_CTL_HYS | PAD_CTL_PKE),
+		NEW_PAD_CTRL(MX53_PAD_FEC_RXD1__FEC_RDATA_1,
+			     PAD_CTL_HYS | PAD_CTL_PKE),
+		NEW_PAD_CTRL(MX53_PAD_FEC_TXD0__FEC_TDATA_0, PAD_CTL_DSE_HIGH),
+		NEW_PAD_CTRL(MX53_PAD_FEC_TXD1__FEC_TDATA_1, PAD_CTL_DSE_HIGH),
+
+		/* FEC 1 pads */
+		NEW_PAD_CTRL(MX53_PAD_KEY_COL0__FEC_RDATA_3,
+			     PAD_CTL_HYS | PAD_CTL_PKE),
+		NEW_PAD_CTRL(MX53_PAD_KEY_ROW0__FEC_TX_ER,
+			     PAD_CTL_HYS | PAD_CTL_PKE),
+		NEW_PAD_CTRL(MX53_PAD_KEY_COL1__FEC_RX_CLK,
+			     PAD_CTL_HYS | PAD_CTL_PKE),
+		NEW_PAD_CTRL(MX53_PAD_KEY_ROW1__FEC_COL,
+			     PAD_CTL_HYS | PAD_CTL_PKE),
+		NEW_PAD_CTRL(MX53_PAD_KEY_COL2__FEC_RDATA_2,
+			     PAD_CTL_HYS | PAD_CTL_PKE),
+		NEW_PAD_CTRL(MX53_PAD_KEY_ROW2__FEC_TDATA_2, PAD_CTL_DSE_HIGH),
+		NEW_PAD_CTRL(MX53_PAD_KEY_COL3__FEC_CRS,
+			     PAD_CTL_HYS | PAD_CTL_PKE),
+		NEW_PAD_CTRL(MX53_PAD_GPIO_19__FEC_TDATA_3, PAD_CTL_DSE_HIGH),
+	};
+
+	imx_iomux_v3_setup_multiple_pads(fec_pads, ARRAY_SIZE(fec_pads));
+}
+
+#ifdef CONFIG_FSL_ESDHC
+struct fsl_esdhc_cfg esdhc_cfg = {
+	MMC_SDHC1_BASE_ADDR,
+};
+
+int board_mmc_getcd(struct mmc *mmc)
+{
+	imx_iomux_v3_setup_pad(MX53_PAD_GPIO_1__GPIO1_1);
+	gpio_direction_input(IMX_GPIO_NR(1, 1));
+
+	return !gpio_get_value(IMX_GPIO_NR(1, 1));
+}
+
+#define SD_CMD_PAD_CTRL		(PAD_CTL_HYS | PAD_CTL_DSE_HIGH | \
+				 PAD_CTL_PUS_100K_UP)
+#define SD_PAD_CTRL		(PAD_CTL_HYS | PAD_CTL_PUS_47K_UP | \
+				 PAD_CTL_DSE_HIGH)
+
+int board_mmc_init(bd_t *bis)
+{
+	static const iomux_v3_cfg_t sd1_pads[] = {
+		NEW_PAD_CTRL(MX53_PAD_SD1_CMD__ESDHC1_CMD, SD_CMD_PAD_CTRL),
+		NEW_PAD_CTRL(MX53_PAD_SD1_CLK__ESDHC1_CLK, SD_PAD_CTRL),
+		NEW_PAD_CTRL(MX53_PAD_SD1_DATA0__ESDHC1_DAT0, SD_PAD_CTRL),
+		NEW_PAD_CTRL(MX53_PAD_SD1_DATA1__ESDHC1_DAT1, SD_PAD_CTRL),
+		NEW_PAD_CTRL(MX53_PAD_SD1_DATA2__ESDHC1_DAT2, SD_PAD_CTRL),
+		NEW_PAD_CTRL(MX53_PAD_SD1_DATA3__ESDHC1_DAT3, SD_PAD_CTRL),
+	};
+
+	esdhc_cfg.sdhc_clk = mxc_get_clock(MXC_ESDHC_CLK);
+
+	imx_iomux_v3_setup_multiple_pads(sd1_pads, ARRAY_SIZE(sd1_pads));
+
+	return fsl_esdhc_initialize(bis, &esdhc_cfg);
+}
+#endif
+
+#ifdef CONFIG_VIDEO
+static void enable_lvds_clock(struct display_info_t const *dev, const u8 hclk)
+{
+	static struct mxc_ccm_reg *mxc_ccm = (struct mxc_ccm_reg *)MXC_CCM_BASE;
+	int ret;
+
+	/* For ETM0430G0DH6 model, this must be enabled before the clock. */
+	gpio_direction_output(IMX_GPIO_NR(6, 0), 1);
+
+	/*
+	 * Set LVDS clock to 33.28 MHz for the display. The PLL4 is set to
+	 * 233 MHz, divided by 7 by setting CCM_CSCMR2 LDB_DI0_IPU_DIV=1 .
+	 */
+	ret = mxc_set_clock(MXC_HCLK, hclk, MXC_LDB_CLK);
+	if (ret)
+		puts("IPU:   Failed to configure LDB clock\n");
+
+	/* Configure CCM_CSCMR2 */
+	clrsetbits_le32(&mxc_ccm->cscmr2,
+			(0x7 << 26) | BIT(10) | BIT(8),
+			(0x5 << 26) | BIT(10) | BIT(8));
+
+	/* Configure LDB_CTRL */
+	writel(0x201, 0x53fa8008);
+}
+
+static void enable_lvds_etm0430g0dh6(struct display_info_t const *dev)
+{
+	/* For ETM0430G0DH6 model, this must be enabled before the clock. */
+	gpio_direction_output(IMX_GPIO_NR(6, 0), 1);
+
+	/*
+	 * Set LVDS clock to 9 MHz for the display. The PLL4 is set to
+	 * 63 MHz, divided by 7 by setting CCM_CSCMR2 LDB_DI0_IPU_DIV=1 .
+	 */
+	enable_lvds_clock(dev, 63);
+}
+
+static void enable_lvds_etm0700g0dh6(struct display_info_t const *dev)
+{
+	/*
+	 * Set LVDS clock to 33.28 MHz for the display. The PLL4 is set to
+	 * 233 MHz, divided by 7 by setting CCM_CSCMR2 LDB_DI0_IPU_DIV=1 .
+	 */
+	enable_lvds_clock(dev, 233);
+
+	/* For ETM0700G0DH6 model, this may be enabled after the clock. */
+	gpio_direction_output(IMX_GPIO_NR(6, 0), 1);
+}
+
+static const char *lvds_compat_string;
+
+static int detect_lvds(struct display_info_t const *dev)
+{
+	u8 touchid[23];
+	u8 *touchptr = &touchid[0];
+	int ret;
+
+	ret = i2c_set_bus_num(0);
+	if (ret)
+		return 0;
+
+	/* Touchscreen is at address 0x38, ID register is 0xbb. */
+	ret = i2c_read(0x38, 0xbb, 1, touchid, sizeof(touchid));
+	if (ret)
+		return 0;
+
+	/* EP0430 prefixes the response with 0xbb, skip it. */
+	if (*touchptr == 0xbb)
+		touchptr++;
+
+	/* Skip the 'EP' prefix. */
+	touchptr += 2;
+
+	ret = !memcmp(touchptr, &dev->mode.name[7], 4);
+	if (ret)
+		lvds_compat_string = dev->mode.name;
+
+	return ret;
+}
+
+void board_preboot_os(void)
+{
+	/* Power off the LCD to prevent awful color flicker */
+	gpio_direction_output(IMX_GPIO_NR(6, 0), 0);
+}
+
+int ft_board_setup(void *blob, bd_t *bd)
+{
+	if (lvds_compat_string)
+		do_fixup_by_path_string(blob, "/panel", "compatible",
+					lvds_compat_string);
+
+	return 0;
+}
+
+struct display_info_t const displays[] = {
+	{
+		.bus	= 0,
+		.addr	= 0,
+		.detect	= detect_lvds,
+		.enable	= enable_lvds_etm0430g0dh6,
+		.pixfmt	= IPU_PIX_FMT_RGB666,
+		.mode	= {
+			.name		= "edt,etm0430g0dh6",
+			.refresh	= 60,
+			.xres		= 480,
+			.yres		= 272,
+			.pixclock	= 111111, /* picosecond (9 MHz) */
+			.left_margin	= 2,
+			.right_margin	= 2,
+			.upper_margin	= 2,
+			.lower_margin	= 2,
+			.hsync_len	= 41,
+			.vsync_len	= 10,
+			.sync		= 0x40000000,
+			.vmode          = FB_VMODE_NONINTERLACED
+		}
+	}, {
+		.bus	= 0,
+		.addr	= 0,
+		.detect	= detect_lvds,
+		.enable	= enable_lvds_etm0700g0dh6,
+		.pixfmt	= IPU_PIX_FMT_RGB666,
+		.mode	= {
+			.name		= "edt,etm0700g0dh6",
+			.refresh	= 60,
+			.xres		= 800,
+			.yres		= 480,
+			.pixclock	= 30048, /* picosecond (33.28 MHz) */
+			.left_margin	= 40,
+			.right_margin	= 88,
+			.upper_margin	= 10,
+			.lower_margin	= 33,
+			.hsync_len	= 128,
+			.vsync_len	= 2,
+			.sync		= FB_SYNC_EXT,
+			.vmode          = FB_VMODE_NONINTERLACED
+		}
+	}
+};
+
+size_t display_count = ARRAY_SIZE(displays);
+#endif
+
+#ifdef CONFIG_SPLASH_SCREEN
+static struct splash_location default_splash_locations[] = {
+	{
+		.name		= "mmc_fs",
+		.storage	= SPLASH_STORAGE_MMC,
+		.flags		= SPLASH_STORAGE_FS,
+		.devpart	= "0:1",
+	},
+};
+
+int splash_screen_prepare(void)
+{
+	return splash_source_load(default_splash_locations,
+				  ARRAY_SIZE(default_splash_locations));
+}
+#endif
+
+#define I2C_PAD_CTRL	(PAD_CTL_SRE_FAST | PAD_CTL_DSE_HIGH | \
+			 PAD_CTL_PUS_100K_UP | PAD_CTL_ODE)
+
+static void setup_iomux_i2c(void)
+{
+	static const iomux_v3_cfg_t i2c_pads[] = {
+		/* I2C1 */
+		NEW_PAD_CTRL(MX53_PAD_EIM_D28__I2C1_SDA, I2C_PAD_CTRL),
+		NEW_PAD_CTRL(MX53_PAD_EIM_D21__I2C1_SCL, I2C_PAD_CTRL),
+		/* I2C2 */
+		NEW_PAD_CTRL(MX53_PAD_EIM_D16__I2C2_SDA, I2C_PAD_CTRL),
+		NEW_PAD_CTRL(MX53_PAD_EIM_EB2__I2C2_SCL, I2C_PAD_CTRL),
+	};
+
+	imx_iomux_v3_setup_multiple_pads(i2c_pads, ARRAY_SIZE(i2c_pads));
+}
+
+static void setup_iomux_video(void)
+{
+	static const iomux_v3_cfg_t lcd_pads[] = {
+		MX53_PAD_LVDS0_TX3_P__LDB_LVDS0_TX3,
+		MX53_PAD_LVDS0_CLK_P__LDB_LVDS0_CLK,
+		MX53_PAD_LVDS0_TX2_P__LDB_LVDS0_TX2,
+		MX53_PAD_LVDS0_TX1_P__LDB_LVDS0_TX1,
+		MX53_PAD_LVDS0_TX0_P__LDB_LVDS0_TX0,
+	};
+
+	imx_iomux_v3_setup_multiple_pads(lcd_pads, ARRAY_SIZE(lcd_pads));
+}
+
+static void setup_iomux_nand(void)
+{
+	static const iomux_v3_cfg_t nand_pads[] = {
+		NEW_PAD_CTRL(MX53_PAD_NANDF_WE_B__EMI_NANDF_WE_B,
+			     PAD_CTL_DSE_HIGH),
+		NEW_PAD_CTRL(MX53_PAD_NANDF_RE_B__EMI_NANDF_RE_B,
+			     PAD_CTL_DSE_HIGH),
+		NEW_PAD_CTRL(MX53_PAD_NANDF_CLE__EMI_NANDF_CLE,
+			     PAD_CTL_DSE_HIGH),
+		NEW_PAD_CTRL(MX53_PAD_NANDF_ALE__EMI_NANDF_ALE,
+			     PAD_CTL_DSE_HIGH),
+		NEW_PAD_CTRL(MX53_PAD_NANDF_WP_B__EMI_NANDF_WP_B,
+			     PAD_CTL_PUS_100K_UP),
+		NEW_PAD_CTRL(MX53_PAD_NANDF_RB0__EMI_NANDF_RB_0,
+			     PAD_CTL_PUS_100K_UP),
+		NEW_PAD_CTRL(MX53_PAD_NANDF_CS0__EMI_NANDF_CS_0,
+			     PAD_CTL_DSE_HIGH),
+		NEW_PAD_CTRL(MX53_PAD_PATA_DATA0__EMI_NANDF_D_0,
+			     PAD_CTL_DSE_HIGH | PAD_CTL_PKE),
+		NEW_PAD_CTRL(MX53_PAD_PATA_DATA1__EMI_NANDF_D_1,
+			     PAD_CTL_DSE_HIGH | PAD_CTL_PKE),
+		NEW_PAD_CTRL(MX53_PAD_PATA_DATA2__EMI_NANDF_D_2,
+			     PAD_CTL_DSE_HIGH | PAD_CTL_PKE),
+		NEW_PAD_CTRL(MX53_PAD_PATA_DATA3__EMI_NANDF_D_3,
+			     PAD_CTL_DSE_HIGH | PAD_CTL_PKE),
+		NEW_PAD_CTRL(MX53_PAD_PATA_DATA4__EMI_NANDF_D_4,
+			     PAD_CTL_DSE_HIGH | PAD_CTL_PKE),
+		NEW_PAD_CTRL(MX53_PAD_PATA_DATA5__EMI_NANDF_D_5,
+			     PAD_CTL_DSE_HIGH | PAD_CTL_PKE),
+		NEW_PAD_CTRL(MX53_PAD_PATA_DATA6__EMI_NANDF_D_6,
+			     PAD_CTL_DSE_HIGH | PAD_CTL_PKE),
+		NEW_PAD_CTRL(MX53_PAD_PATA_DATA7__EMI_NANDF_D_7,
+			     PAD_CTL_DSE_HIGH | PAD_CTL_PKE),
+	};
+
+	imx_iomux_v3_setup_multiple_pads(nand_pads, ARRAY_SIZE(nand_pads));
+}
+
+static void m53_set_clock(void)
+{
+	int ret;
+	const u32 ref_clk = MXC_HCLK;
+	const u32 dramclk = 400;
+	u32 cpuclk;
+
+	imx_iomux_v3_setup_pad(NEW_PAD_CTRL(MX53_PAD_GPIO_10__GPIO4_0,
+					    PAD_CTL_DSE_HIGH | PAD_CTL_PKE));
+	gpio_direction_input(IMX_GPIO_NR(4, 0));
+
+	/* GPIO10 selects modules' CPU speed, 1 = 1200MHz ; 0 = 800MHz */
+	cpuclk = gpio_get_value(IMX_GPIO_NR(4, 0)) ? 1200 : 800;
+
+	ret = mxc_set_clock(ref_clk, cpuclk, MXC_ARM_CLK);
+	if (ret)
+		printf("CPU:   Switch CPU clock to %dMHz failed\n", cpuclk);
+
+	ret = mxc_set_clock(ref_clk, dramclk, MXC_PERIPH_CLK);
+	if (ret) {
+		printf("CPU:   Switch peripheral clock to %dMHz failed\n",
+		       dramclk);
+	}
+
+	ret = mxc_set_clock(ref_clk, dramclk, MXC_DDR_CLK);
+	if (ret)
+		printf("CPU:   Switch DDR clock to %dMHz failed\n", dramclk);
+}
+
+static void m53_set_nand(void)
+{
+	u32 i;
+
+	/* NAND flash is muxed on ATA pins */
+	setbits_le32(M4IF_BASE_ADDR + 0xc, M4IF_GENP_WEIM_MM_MASK);
+
+	/* Wait for Grant/Ack sequence (see EIM_CSnGCR2:MUX16_BYP_GRANT) */
+	for (i = 0x4; i < 0x94; i += 0x18) {
+		clrbits_le32(WEIM_BASE_ADDR + i,
+			     WEIM_GCR2_MUX16_BYP_GRANT_MASK);
+	}
+
+	mxc_set_clock(0, 33, MXC_NFC_CLK);
+	enable_nfc_clk(1);
+}
+
+int board_early_init_f(void)
+{
+	setup_iomux_uart();
+	setup_iomux_fec();
+	setup_iomux_i2c();
+	setup_iomux_nand();
+	setup_iomux_video();
+
+	m53_set_clock();
+
+	mxc_set_sata_internal_clock();
+
+	/* NAND clock @ 33MHz */
+	m53_set_nand();
+
+	return 0;
+}
+
+int board_init(void)
+{
+	gd->bd->bi_boot_params = PHYS_SDRAM_1 + 0x100;
+
+	return 0;
+}
+
+int checkboard(void)
+{
+	puts("Board: Menlosystems M53Menlo\n");
+
+	return 0;
+}
+
+/*
+ * NAND SPL
+ */
+#ifdef CONFIG_SPL_BUILD
+void spl_board_init(void)
+{
+	setup_iomux_nand();
+	m53_set_clock();
+	m53_set_nand();
+}
+
+u32 spl_boot_device(void)
+{
+	return BOOT_DEVICE_NAND;
+}
+#endif
diff --git a/board/technexion/pico-imx7d/pico-imx7d.c b/board/technexion/pico-imx7d/pico-imx7d.c
index 0767d0462f..53e14693a5 100644
--- a/board/technexion/pico-imx7d/pico-imx7d.c
+++ b/board/technexion/pico-imx7d/pico-imx7d.c
@@ -282,7 +282,34 @@ int checkboard(void)
 	return 0;
 }
 
+static iomux_v3_cfg_t const usb_otg2_pads[] = {
+	MX7D_PAD_UART3_CTS_B__USB_OTG2_PWR | MUX_PAD_CTRL(NO_PAD_CTRL),
+};
+
+int board_ehci_hcd_init(int port)
+{
+	switch (port) {
+	case 0:
+		break;
+	case 1:
+		imx_iomux_v3_setup_multiple_pads(usb_otg2_pads,
+						 ARRAY_SIZE(usb_otg2_pads));
+		break;
+	default:
+		return -EINVAL;
+	}
+	return 0;
+}
+
 int board_usb_phy_mode(int port)
 {
-	return USB_INIT_DEVICE;
+	switch (port) {
+	case 0:
+		return USB_INIT_DEVICE;
+	case 1:
+		return USB_INIT_HOST;
+	default:
+		return -EINVAL;
+	}
+	return 0;
 }
diff --git a/board/toradex/colibri_imx7/colibri_imx7.c b/board/toradex/colibri_imx7/colibri_imx7.c
index 2b7591eb00..a4c99626b4 100644
--- a/board/toradex/colibri_imx7/colibri_imx7.c
+++ b/board/toradex/colibri_imx7/colibri_imx7.c
@@ -52,7 +52,7 @@ DECLARE_GLOBAL_DATA_PTR;
 
 int dram_init(void)
 {
-	gd->ram_size = get_ram_size((void *)PHYS_SDRAM, PHYS_SDRAM_SIZE);
+	gd->ram_size = get_ram_size((void *)PHYS_SDRAM, imx_ddr_size());
 
 	return 0;
 }
diff --git a/board/warp7/MAINTAINERS b/board/warp7/MAINTAINERS
index 1d3ee29222..55f8c815d4 100644
--- a/board/warp7/MAINTAINERS
+++ b/board/warp7/MAINTAINERS
@@ -4,3 +4,4 @@ S:	Maintained
 F:	board/warp7/
 F:	include/configs/warp7.h
 F:	configs/warp7_defconfig
+F:	configs/warp7_bl33_defconfig