diff options
Diffstat (limited to 'board')
| -rw-r--r-- | board/samsung/universal_c210/universal.c | 166 |
1 files changed, 166 insertions, 0 deletions
diff --git a/board/samsung/universal_c210/universal.c b/board/samsung/universal_c210/universal.c index 4c1163e9bb..afe3bb0aeb 100644 --- a/board/samsung/universal_c210/universal.c +++ b/board/samsung/universal_c210/universal.c @@ -24,6 +24,7 @@ #include <common.h> #include <spi.h> +#include <lcd.h> #include <asm/io.h> #include <asm/gpio.h> #include <asm/arch/adc.h> @@ -35,6 +36,8 @@ #include <asm/arch/cpu.h> #include <max8998_pmic.h> #include <asm/arch/watchdog.h> +#include <libtizen.h> +#include <ld9040.h> DECLARE_GLOBAL_DATA_PTR; @@ -316,6 +319,168 @@ int universal_spi_read(void) } #endif +static void init_pmic_lcd(void) +{ + unsigned char val; + int ret = 0; + + struct pmic *p = get_pmic(); + + if (pmic_probe(p)) + return; + + /* LDO7 1.8V */ + val = 0x02; /* (1800 - 1600) / 100; */ + ret |= pmic_reg_write(p, MAX8998_REG_LDO7, val); + + /* LDO17 3.0V */ + val = 0xe; /* (3000 - 1600) / 100; */ + ret |= pmic_reg_write(p, MAX8998_REG_LDO17, val); + + /* Disable unneeded regulators */ + /* + * ONOFF1 + * Buck1 ON, Buck2 OFF, Buck3 ON, Buck4 ON + * LDO2 ON, LDO3 OFF, LDO4 OFF, LDO5 ON + */ + val = 0xB9; + ret |= pmic_reg_write(p, MAX8998_REG_ONOFF1, val); + + /* ONOFF2 + * LDO6 OFF, LDO7 ON, LDO8 OFF, LDO9 ON, + * LDO10 OFF, LDO11 OFF, LDO12 OFF, LDO13 OFF + */ + val = 0x50; + ret |= pmic_reg_write(p, MAX8998_REG_ONOFF2, val); + + /* ONOFF3 + * LDO14 OFF, LDO15 OFF, LGO16 OFF, LDO17 OFF + * EPWRHOLD OFF, EBATTMON OFF, ELBCNFG2 OFF, ELBCNFG1 OFF + */ + val = 0x00; + ret |= pmic_reg_write(p, MAX8998_REG_ONOFF3, val); + + if (ret) + puts("LCD pmic initialisation error!\n"); +} + +static void lcd_cfg_gpio(void) +{ + unsigned int i, f3_end = 4; + + for (i = 0; i < 8; i++) { + /* set GPF0,1,2[0:7] for RGB Interface and Data lines (32bit) */ + s5p_gpio_cfg_pin(&gpio1->f0, i, GPIO_FUNC(2)); + s5p_gpio_cfg_pin(&gpio1->f1, i, GPIO_FUNC(2)); + s5p_gpio_cfg_pin(&gpio1->f2, i, GPIO_FUNC(2)); + /* pull-up/down disable */ + s5p_gpio_set_pull(&gpio1->f0, i, GPIO_PULL_NONE); + s5p_gpio_set_pull(&gpio1->f1, i, GPIO_PULL_NONE); + s5p_gpio_set_pull(&gpio1->f2, i, GPIO_PULL_NONE); + + /* drive strength to max (24bit) */ + s5p_gpio_set_drv(&gpio1->f0, i, GPIO_DRV_4X); + s5p_gpio_set_rate(&gpio1->f0, i, GPIO_DRV_SLOW); + s5p_gpio_set_drv(&gpio1->f1, i, GPIO_DRV_4X); + s5p_gpio_set_rate(&gpio1->f1, i, GPIO_DRV_SLOW); + s5p_gpio_set_drv(&gpio1->f2, i, GPIO_DRV_4X); + s5p_gpio_set_rate(&gpio1->f0, i, GPIO_DRV_SLOW); + } + + for (i = 0; i < f3_end; i++) { + /* set GPF3[0:3] for RGB Interface and Data lines (32bit) */ + s5p_gpio_cfg_pin(&gpio1->f3, i, GPIO_FUNC(2)); + /* pull-up/down disable */ + s5p_gpio_set_pull(&gpio1->f3, i, GPIO_PULL_NONE); + /* drive strength to max (24bit) */ + s5p_gpio_set_drv(&gpio1->f3, i, GPIO_DRV_4X); + s5p_gpio_set_rate(&gpio1->f3, i, GPIO_DRV_SLOW); + } + + /* gpio pad configuration for LCD reset. */ + s5p_gpio_cfg_pin(&gpio2->y4, 5, GPIO_OUTPUT); + + spi_init(); +} + +static void reset_lcd(void) +{ + s5p_gpio_set_value(&gpio2->y4, 5, 1); + udelay(10000); + s5p_gpio_set_value(&gpio2->y4, 5, 0); + udelay(10000); + s5p_gpio_set_value(&gpio2->y4, 5, 1); + udelay(100); +} + +static void lcd_power_on(void) +{ + struct pmic *p = get_pmic(); + + if (pmic_probe(p)) + return; + + pmic_set_output(p, MAX8998_REG_ONOFF3, MAX8998_LDO17, LDO_ON); + pmic_set_output(p, MAX8998_REG_ONOFF2, MAX8998_LDO7, LDO_ON); +} + +vidinfo_t panel_info = { + .vl_freq = 60, + .vl_col = 480, + .vl_row = 800, + .vl_width = 480, + .vl_height = 800, + .vl_clkp = CONFIG_SYS_HIGH, + .vl_hsp = CONFIG_SYS_HIGH, + .vl_vsp = CONFIG_SYS_HIGH, + .vl_dp = CONFIG_SYS_HIGH, + + .vl_bpix = 5, /* Bits per pixel */ + + /* LD9040 LCD Panel */ + .vl_hspw = 2, + .vl_hbpd = 16, + .vl_hfpd = 16, + + .vl_vspw = 2, + .vl_vbpd = 8, + .vl_vfpd = 8, + .vl_cmd_allow_len = 0xf, + + .win_id = 0, + .cfg_gpio = lcd_cfg_gpio, + .backlight_on = NULL, + .lcd_power_on = lcd_power_on, + .reset_lcd = reset_lcd, + .dual_lcd_enabled = 0, + + .init_delay = 0, + .power_on_delay = 10000, + .reset_delay = 10000, + .interface_mode = FIMD_RGB_INTERFACE, + .mipi_enabled = 0, +}; + +void init_panel_info(vidinfo_t *vid) +{ + vid->logo_on = 1; + vid->resolution = HD_RESOLUTION; + vid->rgb_mode = MODE_RGB_P; + +#ifdef CONFIG_TIZEN + get_tizen_logo_info(vid); +#endif + + /* for LD9040. */ + vid->pclk_name = 1; /* MPLL */ + vid->sclk_div = 1; + + vid->cfg_ldo = ld9040_cfg_ldo; + vid->enable_ldo = ld9040_enable_ldo; + + setenv("lcdinfo", "lcd=ld9040"); +} + int board_init(void) { gpio1 = (struct exynos4_gpio_part1 *) EXYNOS4_GPIO_PART1_BASE; @@ -326,6 +491,7 @@ int board_init(void) #if defined(CONFIG_PMIC) pmic_init(); + init_pmic_lcd(); #endif #ifdef CONFIG_SOFT_SPI soft_spi_init(); |