diff options
Diffstat (limited to 'board')
| -rw-r--r-- | board/hale/tt01/tt01.c | 34 |
1 files changed, 32 insertions, 2 deletions
diff --git a/board/hale/tt01/tt01.c b/board/hale/tt01/tt01.c index 2995c8f105..ed3fa6ef9a 100644 --- a/board/hale/tt01/tt01.c +++ b/board/hale/tt01/tt01.c @@ -26,6 +26,8 @@ #include <netdev.h> #include <command.h> #include <pmic.h> +#include <fsl_pmic.h> +#include <mc13783.h> #include <asm/arch/clock.h> #include <asm/arch/sys_proto.h> #include <asm/io.h> @@ -175,8 +177,6 @@ int board_init(void) int board_late_init(void) { - pmic_init(); - #ifdef CONFIG_HW_WATCHDOG mxc_hw_watchdog_enable(); #endif @@ -190,6 +190,36 @@ int checkboard(void) return 0; } +#ifdef CONFIG_MXC_MMC +int board_mmc_init(bd_t *bis) +{ + u32 val; + struct pmic *p; + + /* + * this is the first driver to use the pmic, so call + * pmic_init() here. board_late_init() is too late for + * the MMC driver. + */ + pmic_init(); + p = get_pmic(); + + /* configure pins for SDHC1 only */ + mx31_gpio_mux(IOMUX_MODE(MUX_CTL_SD1_CLK, MUX_CTL_FUNC)); + mx31_gpio_mux(IOMUX_MODE(MUX_CTL_SD1_CMD, MUX_CTL_FUNC)); + mx31_gpio_mux(IOMUX_MODE(MUX_CTL_SD1_DATA0, MUX_CTL_FUNC)); + mx31_gpio_mux(IOMUX_MODE(MUX_CTL_SD1_DATA1, MUX_CTL_FUNC)); + mx31_gpio_mux(IOMUX_MODE(MUX_CTL_SD1_DATA2, MUX_CTL_FUNC)); + mx31_gpio_mux(IOMUX_MODE(MUX_CTL_SD1_DATA3, MUX_CTL_FUNC)); + + /* turn on power V_MMC1 */ + if (pmic_reg_read(p, REG_MODE_1, &val) < 0) + pmic_reg_write(p, REG_MODE_1, val | VMMC1EN); + + return mxc_mmc_init(bis); +} +#endif + int board_eth_init(bd_t *bis) { int rc = 0; |