summaryrefslogtreecommitdiff
path: root/common/cmd_ide.c
diff options
context:
space:
mode:
Diffstat (limited to 'common/cmd_ide.c')
-rw-r--r--common/cmd_ide.c135
1 files changed, 13 insertions, 122 deletions
diff --git a/common/cmd_ide.c b/common/cmd_ide.c
index c375ef2093..04a6d9b398 100644
--- a/common/cmd_ide.c
+++ b/common/cmd_ide.c
@@ -253,7 +253,7 @@ int do_diskboot(cmd_tbl_t *cmdtp, int flag, int argc, char *const argv[])
/* ------------------------------------------------------------------------- */
-void __ide_led(uchar led, uchar status)
+__weak void ide_led(uchar led, uchar status)
{
#if defined(CONFIG_IDE_LED) && defined(PER8_BASE) /* required by LED_PORT */
static uchar led_buffer; /* Buffer for current LED status */
@@ -269,9 +269,6 @@ void __ide_led(uchar led, uchar status)
#endif
}
-void ide_led(uchar led, uchar status)
- __attribute__ ((weak, alias("__ide_led")));
-
#ifndef CONFIG_IDE_LED /* define LED macros, they are not used anyways */
# define DEVICE_LED(x) 0
# define LED_IDE1 1
@@ -280,7 +277,7 @@ void ide_led(uchar led, uchar status)
/* ------------------------------------------------------------------------- */
-inline void __ide_outb(int dev, int port, unsigned char val)
+__weak void ide_outb(int dev, int port, unsigned char val)
{
debug("ide_outb (dev= %d, port= 0x%x, val= 0x%02x) : @ 0x%08lx\n",
dev, port, val,
@@ -299,10 +296,7 @@ inline void __ide_outb(int dev, int port, unsigned char val)
#endif
}
-void ide_outb(int dev, int port, unsigned char val)
- __attribute__ ((weak, alias("__ide_outb")));
-
-inline unsigned char __ide_inb(int dev, int port)
+__weak unsigned char ide_inb(int dev, int port)
{
uchar val;
@@ -318,19 +312,6 @@ inline unsigned char __ide_inb(int dev, int port)
return val;
}
-unsigned char ide_inb(int dev, int port)
- __attribute__ ((weak, alias("__ide_inb")));
-
-#ifdef CONFIG_TUNE_PIO
-inline int __ide_set_piomode(int pio_mode)
-{
- return 0;
-}
-
-inline int ide_set_piomode(int pio_mode)
- __attribute__ ((weak, alias("__ide_set_piomode")));
-#endif
-
void ide_init(void)
{
unsigned char c;
@@ -471,23 +452,14 @@ block_dev_desc_t *ide_get_dev(int dev)
/* ------------------------------------------------------------------------- */
-void ide_input_swap_data(int dev, ulong *sect_buf, int words)
- __attribute__ ((weak, alias("__ide_input_swap_data")));
-
-void ide_input_data(int dev, ulong *sect_buf, int words)
- __attribute__ ((weak, alias("__ide_input_data")));
-
-void ide_output_data(int dev, const ulong *sect_buf, int words)
- __attribute__ ((weak, alias("__ide_output_data")));
-
/* We only need to swap data if we are running on a big endian cpu. */
#if defined(__LITTLE_ENDIAN)
-void __ide_input_swap_data(int dev, ulong *sect_buf, int words)
+__weak void ide_input_swap_data(int dev, ulong *sect_buf, int words)
{
ide_input_data(dev, sect_buf, words);
}
#else
-void __ide_input_swap_data(int dev, ulong *sect_buf, int words)
+__weak void ide_input_swap_data(int dev, ulong *sect_buf, int words)
{
volatile ushort *pbuf =
(ushort *) (ATA_CURR_BASE(dev) + ATA_DATA_REG);
@@ -510,7 +482,7 @@ void __ide_input_swap_data(int dev, ulong *sect_buf, int words)
#if defined(CONFIG_IDE_SWAP_IO)
-void __ide_output_data(int dev, const ulong *sect_buf, int words)
+__weak void ide_output_data(int dev, const ulong *sect_buf, int words)
{
ushort *dbuf;
volatile ushort *pbuf;
@@ -525,7 +497,7 @@ void __ide_output_data(int dev, const ulong *sect_buf, int words)
}
}
#else /* ! CONFIG_IDE_SWAP_IO */
-void __ide_output_data(int dev, const ulong *sect_buf, int words)
+__weak void ide_output_data(int dev, const ulong *sect_buf, int words)
{
#if defined(CONFIG_IDE_AHB)
ide_write_data(dev, sect_buf, words);
@@ -536,7 +508,7 @@ void __ide_output_data(int dev, const ulong *sect_buf, int words)
#endif /* CONFIG_IDE_SWAP_IO */
#if defined(CONFIG_IDE_SWAP_IO)
-void __ide_input_data(int dev, ulong *sect_buf, int words)
+__weak void ide_input_data(int dev, ulong *sect_buf, int words)
{
ushort *dbuf;
volatile ushort *pbuf;
@@ -554,7 +526,7 @@ void __ide_input_data(int dev, ulong *sect_buf, int words)
}
}
#else /* ! CONFIG_IDE_SWAP_IO */
-void __ide_input_data(int dev, ulong *sect_buf, int words)
+__weak void ide_input_data(int dev, ulong *sect_buf, int words)
{
#if defined(CONFIG_IDE_AHB)
ide_read_data(dev, sect_buf, words);
@@ -575,14 +547,6 @@ static void ide_ident(block_dev_desc_t *dev_desc)
#ifdef CONFIG_ATAPI
int retries = 0;
#endif
-
-#ifdef CONFIG_TUNE_PIO
- int pio_mode;
-#endif
-
-#if 0
- int mode, cycle_time;
-#endif
int device;
device = dev_desc->dev;
@@ -691,72 +655,6 @@ static void ide_ident(block_dev_desc_t *dev_desc)
else
dev_desc->removable = 0;
-#ifdef CONFIG_TUNE_PIO
- /* Mode 0 - 2 only, are directly determined by word 51. */
- pio_mode = iop.tPIO;
- if (pio_mode > 2) {
- printf("WARNING: Invalid PIO (word 51 = %d).\n", pio_mode);
- /* Force it to dead slow, and hope for the best... */
- pio_mode = 0;
- }
-
- /* Any CompactFlash Storage Card that supports PIO mode 3 or above
- * shall set bit 1 of word 53 to one and support the fields contained
- * in words 64 through 70.
- */
- if (iop.field_valid & 0x02) {
- /*
- * Mode 3 and above are possible. Check in order from slow
- * to fast, so we wind up with the highest mode allowed.
- */
- if (iop.eide_pio_modes & 0x01)
- pio_mode = 3;
- if (iop.eide_pio_modes & 0x02)
- pio_mode = 4;
- if (ata_id_is_cfa((u16 *)&iop)) {
- if ((iop.cf_advanced_caps & 0x07) == 0x01)
- pio_mode = 5;
- if ((iop.cf_advanced_caps & 0x07) == 0x02)
- pio_mode = 6;
- }
- }
-
- /* System-specific, depends on bus speeds, etc. */
- ide_set_piomode(pio_mode);
-#endif /* CONFIG_TUNE_PIO */
-
-#if 0
- /*
- * Drive PIO mode autoselection
- */
- mode = iop.tPIO;
-
- printf("tPIO = 0x%02x = %d\n", mode, mode);
- if (mode > 2) { /* 2 is maximum allowed tPIO value */
- mode = 2;
- debug("Override tPIO -> 2\n");
- }
- if (iop.field_valid & 2) { /* drive implements ATA2? */
- debug("Drive implements ATA2\n");
- if (iop.capability & 8) { /* drive supports use_iordy? */
- cycle_time = iop.eide_pio_iordy;
- } else {
- cycle_time = iop.eide_pio;
- }
- debug("cycle time = %d\n", cycle_time);
- mode = 4;
- if (cycle_time > 120)
- mode = 3; /* 120 ns for PIO mode 4 */
- if (cycle_time > 180)
- mode = 2; /* 180 ns for PIO mode 3 */
- if (cycle_time > 240)
- mode = 1; /* 240 ns for PIO mode 4 */
- if (cycle_time > 383)
- mode = 0; /* 383 ns for PIO mode 4 */
- }
- printf("PIO mode to use: PIO %d\n", mode);
-#endif /* 0 */
-
#ifdef CONFIG_ATAPI
if (dev_desc->if_type == IF_TYPE_ATAPI) {
atapi_inquiry(dev_desc);
@@ -1122,17 +1020,10 @@ int ide_device_present(int dev)
* ATAPI Support
*/
-void ide_input_data_shorts(int dev, ushort *sect_buf, int shorts)
- __attribute__ ((weak, alias("__ide_input_data_shorts")));
-
-void ide_output_data_shorts(int dev, ushort *sect_buf, int shorts)
- __attribute__ ((weak, alias("__ide_output_data_shorts")));
-
-
#if defined(CONFIG_IDE_SWAP_IO)
/* since ATAPI may use commands with not 4 bytes alligned length
* we have our own transfer functions, 2 bytes alligned */
-void __ide_output_data_shorts(int dev, ushort *sect_buf, int shorts)
+__weak void ide_output_data_shorts(int dev, ushort *sect_buf, int shorts)
{
ushort *dbuf;
volatile ushort *pbuf;
@@ -1149,7 +1040,7 @@ void __ide_output_data_shorts(int dev, ushort *sect_buf, int shorts)
}
}
-void __ide_input_data_shorts(int dev, ushort *sect_buf, int shorts)
+__weak void ide_input_data_shorts(int dev, ushort *sect_buf, int shorts)
{
ushort *dbuf;
volatile ushort *pbuf;
@@ -1167,12 +1058,12 @@ void __ide_input_data_shorts(int dev, ushort *sect_buf, int shorts)
}
#else /* ! CONFIG_IDE_SWAP_IO */
-void __ide_output_data_shorts(int dev, ushort *sect_buf, int shorts)
+__weak void ide_output_data_shorts(int dev, ushort *sect_buf, int shorts)
{
outsw(ATA_CURR_BASE(dev) + ATA_DATA_REG, sect_buf, shorts);
}
-void __ide_input_data_shorts(int dev, ushort *sect_buf, int shorts)
+__weak void ide_input_data_shorts(int dev, ushort *sect_buf, int shorts)
{
insw(ATA_CURR_BASE(dev) + ATA_DATA_REG, sect_buf, shorts);
}
generated by cgit (git 2.34.1) at 2024-12-26 18:16:36 +0000