diff options
Diffstat (limited to 'cpu/arm_cortexa8/mx51/lowlevel_init.S')
| -rw-r--r-- | cpu/arm_cortexa8/mx51/lowlevel_init.S | 288 |
1 files changed, 0 insertions, 288 deletions
diff --git a/cpu/arm_cortexa8/mx51/lowlevel_init.S b/cpu/arm_cortexa8/mx51/lowlevel_init.S deleted file mode 100644 index 31af9e2b58..0000000000 --- a/cpu/arm_cortexa8/mx51/lowlevel_init.S +++ /dev/null @@ -1,288 +0,0 @@ -/* - * Copyright (C) 2007, Guennadi Liakhovetski <lg@denx.de> - * - * (C) Copyright 2009 Freescale Semiconductor, Inc. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -#include <config.h> -#include <asm/arch/imx-regs.h> -#include <asm/arch/asm-offsets.h> - -/* - * L2CC Cache setup/invalidation/disable - */ -.macro init_l2cc - /* explicitly disable L2 cache */ - mrc 15, 0, r0, c1, c0, 1 - bic r0, r0, #0x2 - mcr 15, 0, r0, c1, c0, 1 - - /* reconfigure L2 cache aux control reg */ - mov r0, #0xC0 /* tag RAM */ - add r0, r0, #0x4 /* data RAM */ - orr r0, r0, #(1 << 24) /* disable write allocate delay */ - orr r0, r0, #(1 << 23) /* disable write allocate combine */ - orr r0, r0, #(1 << 22) /* disable write allocate */ - - cmp r3, #0x10 /* r3 contains the silicon rev */ - - /* disable write combine for TO 2 and lower revs */ - orrls r0, r0, #(1 << 25) - - mcr 15, 1, r0, c9, c0, 2 -.endm /* init_l2cc */ - -/* AIPS setup - Only setup MPROTx registers. - * The PACR default values are good.*/ -.macro init_aips - /* - * Set all MPROTx to be non-bufferable, trusted for R/W, - * not forced to user-mode. - */ - ldr r0, =AIPS1_BASE_ADDR - ldr r1, =0x77777777 - str r1, [r0, #0x0] - str r1, [r0, #0x4] - ldr r0, =AIPS2_BASE_ADDR - str r1, [r0, #0x0] - str r1, [r0, #0x4] - /* - * Clear the on and off peripheral modules Supervisor Protect bit - * for SDMA to access them. Did not change the AIPS control registers - * (offset 0x20) access type - */ -.endm /* init_aips */ - -/* M4IF setup */ -.macro init_m4if - /* VPU and IPU given higher priority (0x4) - * IPU accesses with ID=0x1 given highest priority (=0xA) - */ - ldr r0, =M4IF_BASE_ADDR - - ldr r1, =0x00000203 - str r1, [r0, #0x40] - - ldr r1, =0x0 - str r1, [r0, #0x44] - - ldr r1, =0x00120125 - str r1, [r0, #0x9C] - - ldr r1, =0x001901A3 - str r1, [r0, #0x48] - -.endm /* init_m4if */ - -.macro setup_pll pll, freq - ldr r2, =\pll - ldr r1, =0x00001232 - str r1, [r2, #PLL_DP_CTL] /* Set DPLL ON (set UPEN bit): BRMO=1 */ - mov r1, #0x2 - str r1, [r2, #PLL_DP_CONFIG] /* Enable auto-restart AREN bit */ - - str r3, [r2, #PLL_DP_OP] - str r3, [r2, #PLL_DP_HFS_OP] - - str r4, [r2, #PLL_DP_MFD] - str r4, [r2, #PLL_DP_HFS_MFD] - - str r5, [r2, #PLL_DP_MFN] - str r5, [r2, #PLL_DP_HFS_MFN] - - ldr r1, =0x00001232 - str r1, [r2, #PLL_DP_CTL] -1: ldr r1, [r2, #PLL_DP_CTL] - ands r1, r1, #0x1 - beq 1b -.endm - -.macro init_clock - ldr r0, =CCM_BASE_ADDR - - /* Gate of clocks to the peripherals first */ - ldr r1, =0x3FFFFFFF - str r1, [r0, #CLKCTL_CCGR0] - ldr r1, =0x0 - str r1, [r0, #CLKCTL_CCGR1] - str r1, [r0, #CLKCTL_CCGR2] - str r1, [r0, #CLKCTL_CCGR3] - - ldr r1, =0x00030000 - str r1, [r0, #CLKCTL_CCGR4] - ldr r1, =0x00FFF030 - str r1, [r0, #CLKCTL_CCGR5] - ldr r1, =0x00000300 - str r1, [r0, #CLKCTL_CCGR6] - - /* Disable IPU and HSC dividers */ - mov r1, #0x60000 - str r1, [r0, #CLKCTL_CCDR] - - /* Make sure to switch the DDR away from PLL 1 */ - ldr r1, =0x19239145 - str r1, [r0, #CLKCTL_CBCDR] - /* make sure divider effective */ -1: ldr r1, [r0, #CLKCTL_CDHIPR] - cmp r1, #0x0 - bne 1b - - /* Switch ARM to step clock */ - mov r1, #0x4 - str r1, [r0, #CLKCTL_CCSR] - mov r3, #DP_OP_800 - mov r4, #DP_MFD_800 - mov r5, #DP_MFN_800 - setup_pll PLL1_BASE_ADDR - - mov r3, #DP_OP_665 - mov r4, #DP_MFD_665 - mov r5, #DP_MFN_665 - setup_pll PLL3_BASE_ADDR - - /* Switch peripheral to PLL 3 */ - ldr r0, =CCM_BASE_ADDR - ldr r1, =0x000010C0 - str r1, [r0, #CLKCTL_CBCMR] - ldr r1, =0x13239145 - str r1, [r0, #CLKCTL_CBCDR] - mov r3, #DP_OP_665 - mov r4, #DP_MFD_665 - mov r5, #DP_MFN_665 - setup_pll PLL2_BASE_ADDR - - /* Switch peripheral to PLL2 */ - ldr r0, =CCM_BASE_ADDR - ldr r1, =0x19239145 - str r1, [r0, #CLKCTL_CBCDR] - ldr r1, =0x000020C0 - str r1, [r0, #CLKCTL_CBCMR] - - mov r3, #DP_OP_216 - mov r4, #DP_MFD_216 - mov r5, #DP_MFN_216 - setup_pll PLL3_BASE_ADDR - - - /* Set the platform clock dividers */ - ldr r0, =ARM_BASE_ADDR - ldr r1, =0x00000725 - str r1, [r0, #0x14] - - ldr r0, =CCM_BASE_ADDR - - /* Run 3.0 at Full speed, for other TO's wait till we increase VDDGP */ - ldr r1, =0x0 - ldr r3, [r1, #ROM_SI_REV] - cmp r3, #0x10 - movls r1, #0x1 - movhi r1, #0 - str r1, [r0, #CLKCTL_CACRR] - - /* Switch ARM back to PLL 1 */ - mov r1, #0 - str r1, [r0, #CLKCTL_CCSR] - - /* setup the rest */ - /* Use lp_apm (24MHz) source for perclk */ - ldr r1, =0x000020C2 - str r1, [r0, #CLKCTL_CBCMR] - /* ddr clock from PLL 1, all perclk dividers are 1 since using 24MHz */ - ldr r1, =0x59E35100 - str r1, [r0, #CLKCTL_CBCDR] - - /* Restore the default values in the Gate registers */ - ldr r1, =0xFFFFFFFF - str r1, [r0, #CLKCTL_CCGR0] - str r1, [r0, #CLKCTL_CCGR1] - str r1, [r0, #CLKCTL_CCGR2] - str r1, [r0, #CLKCTL_CCGR3] - str r1, [r0, #CLKCTL_CCGR4] - str r1, [r0, #CLKCTL_CCGR5] - str r1, [r0, #CLKCTL_CCGR6] - - /* Use PLL 2 for UART's, get 66.5MHz from it */ - ldr r1, =0xA5A2A020 - str r1, [r0, #CLKCTL_CSCMR1] - ldr r1, =0x00C30321 - str r1, [r0, #CLKCTL_CSCDR1] - - /* make sure divider effective */ -1: ldr r1, [r0, #CLKCTL_CDHIPR] - cmp r1, #0x0 - bne 1b - - mov r1, #0x0 - str r1, [r0, #CLKCTL_CCDR] - - /* for cko - for ARM div by 8 */ - mov r1, #0x000A0000 - add r1, r1, #0x00000F0 - str r1, [r0, #CLKCTL_CCOSR] -.endm - -.macro setup_wdog - ldr r0, =WDOG1_BASE_ADDR - mov r1, #0x30 - strh r1, [r0] -.endm - -.section ".text.init", "x" - -.globl lowlevel_init -lowlevel_init: - ldr r0, =GPIO1_BASE_ADDR - ldr r1, [r0, #0x0] - orr r1, r1, #(1 << 23) - str r1, [r0, #0x0] - ldr r1, [r0, #0x4] - orr r1, r1, #(1 << 23) - str r1, [r0, #0x4] - -#ifdef ENABLE_IMPRECISE_ABORT - mrs r1, spsr /* save old spsr */ - mrs r0, cpsr /* read out the cpsr */ - bic r0, r0, #0x100 /* clear the A bit */ - msr spsr, r0 /* update spsr */ - add lr, pc, #0x8 /* update lr */ - movs pc, lr /* update cpsr */ - nop - nop - nop - nop - msr spsr, r1 /* restore old spsr */ -#endif - - init_l2cc - - init_aips - - init_m4if - - init_clock - - /* r12 saved upper lr*/ - mov pc,lr - -/* Board level setting value */ -DDR_PERCHARGE_CMD: .word 0x04008008 -DDR_REFRESH_CMD: .word 0x00008010 -DDR_LMR1_W: .word 0x00338018 -DDR_LMR_CMD: .word 0xB2220000 -DDR_TIMING_W: .word 0xB02567A9 -DDR_MISC_W: .word 0x000A0104 |