summaryrefslogtreecommitdiff
path: root/cpu/i386
diff options
context:
space:
mode:
Diffstat (limited to 'cpu/i386')
-rw-r--r--cpu/i386/Makefile6
-rw-r--r--cpu/i386/config.mk2
-rw-r--r--cpu/i386/cpu.c13
-rw-r--r--cpu/i386/interrupts.c196
-rw-r--r--cpu/i386/reset.S11
-rw-r--r--cpu/i386/sc520.c181
-rw-r--r--cpu/i386/sc520_asm.S406
-rw-r--r--cpu/i386/serial.c36
-rw-r--r--cpu/i386/start.S122
-rw-r--r--cpu/i386/start16.S46
-rw-r--r--cpu/i386/timer.c50
11 files changed, 530 insertions, 539 deletions
diff --git a/cpu/i386/Makefile b/cpu/i386/Makefile
index 7067a065a7..c44412a025 100644
--- a/cpu/i386/Makefile
+++ b/cpu/i386/Makefile
@@ -25,10 +25,10 @@ include $(TOPDIR)/config.mk
LIB = lib$(CPU).a
-START = start.o start16.o reset.o
-COBJS = serial.o interrupts.o cpu.o timer.o sc520.o
+START = start.o start16.o reset.o
+COBJS = serial.o interrupts.o cpu.o timer.o sc520.o
AOBJS = sc520_asm.o
-
+
all: .depend $(START) $(LIB)
$(LIB): $(COBJS) $(AOBJS)
diff --git a/cpu/i386/config.mk b/cpu/i386/config.mk
index c7cf151493..16a160d2f3 100644
--- a/cpu/i386/config.mk
+++ b/cpu/i386/config.mk
@@ -21,6 +21,6 @@
# MA 02111-1307 USA
#
-PLATFORM_RELFLAGS +=
+PLATFORM_RELFLAGS +=
PLATFORM_CPPFLAGS += -march=i386 -Werror
diff --git a/cpu/i386/cpu.c b/cpu/i386/cpu.c
index 3c67c124d0..f24e4ba525 100644
--- a/cpu/i386/cpu.c
+++ b/cpu/i386/cpu.c
@@ -1,7 +1,7 @@
/*
* (C) Copyright 2002
* Daniel Engström, Omicron Ceti AB, daniel@omicron.se.
- *
+ *
* (C) Copyright 2002
* Sysgo Real-Time Solutions, GmbH <www.elinos.com>
* Marius Groeger <mgroeger@sysgo.de>
@@ -40,11 +40,11 @@ int cpu_init(void)
{
/* initialize FPU, reset EM, set MP and NE */
asm ("fninit\n" \
- "movl %cr0, %eax\n" \
- "andl $~0x4, %eax\n" \
- "orl $0x22, %eax\n" \
- "movl %eax, %cr0\n" );
-
+ "movl %cr0, %eax\n" \
+ "andl $~0x4, %eax\n" \
+ "orl $0x22, %eax\n" \
+ "movl %eax, %cr0\n" );
+
return 0;
}
@@ -66,4 +66,3 @@ void flush_cache (unsigned long dummy1, unsigned long dummy2)
asm("wbinvd\n");
return;
}
-
diff --git a/cpu/i386/interrupts.c b/cpu/i386/interrupts.c
index 614d408468..84825aea19 100644
--- a/cpu/i386/interrupts.c
+++ b/cpu/i386/interrupts.c
@@ -29,7 +29,6 @@
#include <asm/ibmpc.h>
-
struct idt_entry {
u16 base_low;
u16 selector;
@@ -44,7 +43,7 @@ struct idt_entry idt[256];
#define MAX_IRQ 16
-typedef struct irq_handler {
+typedef struct irq_handler {
struct irq_handler *next;
interrupt_handler_t* isr_func;
void *isr_data;
@@ -60,27 +59,26 @@ typedef struct {
static irq_desc_t irq_table[MAX_IRQ];
-
asm(".globl syscall_entry\n" \
- "syscall_entry:\n" \
- "popl %ebx\n" /* throw away the return address, flags */ \
- "popl %ebx\n" /* and segment that the INT instruction pushed */ \
- "popl %ebx\n" /* on to the stack */ \
- "movl %eax, %ecx\n" /* load the syscall nr argument*/ \
- "movl syscall_tbl, %eax\n" /* load start of syscall table */ \
- "cmpl $(11-1), %ecx\n" /* FixMe: find a way to use NR_SYSCALLS macro here */ \
- "ja bad_syscall\n" \
- "movl (%eax, %ecx, 4), %eax\n" /* load the handler of the syscall*/ \
- "test %eax, %eax\n" /* test for null */ \
- "je bad_syscall\n" \
- "popl %ecx\n" \
- "popl %ebx\n" \
- "sti \n" \
- "jmp *%eax\n" \
+ "syscall_entry:\n" \
+ "popl %ebx\n" /* throw away the return address, flags */ \
+ "popl %ebx\n" /* and segment that the INT instruction pushed */ \
+ "popl %ebx\n" /* on to the stack */ \
+ "movl %eax, %ecx\n" /* load the syscall nr argument*/ \
+ "movl syscall_tbl, %eax\n" /* load start of syscall table */ \
+ "cmpl $(11-1), %ecx\n" /* FixMe: find a way to use NR_SYSCALLS macro here */ \
+ "ja bad_syscall\n" \
+ "movl (%eax, %ecx, 4), %eax\n" /* load the handler of the syscall*/ \
+ "test %eax, %eax\n" /* test for null */ \
+ "je bad_syscall\n" \
+ "popl %ecx\n" \
+ "popl %ebx\n" \
+ "sti \n" \
+ "jmp *%eax\n" \
"bad_syscall: movl $0xffffffff, %eax\n" \
- "popl %ecx\n" \
- "popl %ebx\n" \
- "ret");
+ "popl %ecx\n" \
+ "popl %ebx\n" \
+ "ret");
void __attribute__ ((regparm(0))) syscall_entry(void);
@@ -104,7 +102,7 @@ char exception_stack[4096];
"pusha \n" \
"pushl $"#x"\n" \
"pushl $irq_return\n" \
- "jmp do_irq\n"); \
+ "jmp do_irq\n"); \
void __attribute__ ((regparm(0))) irq_##x(void)
#define DECLARE_EXCEPTION(x, f) \
@@ -173,20 +171,20 @@ DECLARE_INTERRUPT(12);
DECLARE_INTERRUPT(13);
DECLARE_INTERRUPT(14);
DECLARE_INTERRUPT(15);
-
-void __attribute__ ((regparm(0))) default_isr(void);
+
+void __attribute__ ((regparm(0))) default_isr(void);
asm ("default_isr: iret\n");
-void disable_irq(int irq)
+void disable_irq(int irq)
{
if (irq >= MAX_IRQ) {
return;
}
irq_table[irq].status |= IRQ_DISABLED;
-
+
}
-void enable_irq(int irq)
+void enable_irq(int irq)
{
if (irq >= MAX_IRQ) {
return;
@@ -198,7 +196,7 @@ void enable_irq(int irq)
static void unmask_irq(int irq)
{
int imr_port;
-
+
if (irq >= MAX_IRQ) {
return;
}
@@ -207,7 +205,7 @@ static void unmask_irq(int irq)
} else {
imr_port = MASTER_PIC + IMR;
}
-
+
outb(inb(imr_port)&~(1<<(irq&7)), imr_port);
}
@@ -216,7 +214,7 @@ static void unmask_irq(int irq)
static void mask_irq(int irq)
{
int imr_port;
-
+
if (irq >= MAX_IRQ) {
return;
}
@@ -225,8 +223,8 @@ static void mask_irq(int irq)
} else {
imr_port = MASTER_PIC + IMR;
}
-
- outb(inb(imr_port)|(1<<(irq&7)), imr_port);
+
+ outb(inb(imr_port)|(1<<(irq&7)), imr_port);
}
@@ -238,110 +236,110 @@ static void specific_eoi(int irq)
if (irq > 7) {
outb(OCW2_SEOI|(irq&7), SLAVE_PIC + OCW2);
irq = SEOI_IR2; /* also do IR2 on master */
- }
+ }
outb(OCW2_SEOI|irq, MASTER_PIC + OCW2);
}
-void __attribute__ ((regparm(0))) do_irq(int irq)
+void __attribute__ ((regparm(0))) do_irq(int irq)
{
-
+
mask_irq(irq);
-
+
if (irq_table[irq].status & IRQ_DISABLED) {
unmask_irq(irq);
specific_eoi(irq);
return;
}
-
-
+
+
if (NULL != irq_table[irq].handler) {
irq_handler_t *handler;
- for (handler = irq_table[irq].handler;
+ for (handler = irq_table[irq].handler;
NULL!= handler; handler = handler->next) {
handler->isr_func(handler->isr_data);
}
} else {
- if ((irq & 7) != 7) {
+ if ((irq & 7) != 7) {
printf("Spurious irq %d\n", irq);
}
- }
+ }
unmask_irq(irq);
- specific_eoi(irq);
+ specific_eoi(irq);
}
-void __attribute__ ((regparm(0))) unknown_exception_entry(int cause, int ip, int seg)
+void __attribute__ ((regparm(0))) unknown_exception_entry(int cause, int ip, int seg)
{
printf("Unknown Exception %d at %04x:%08x\n", cause, seg, ip);
}
-void __attribute__ ((regparm(0))) divide_exception_entry(int cause, int ip, int seg)
+void __attribute__ ((regparm(0))) divide_exception_entry(int cause, int ip, int seg)
{
printf("Divide Error (Division by zero) at %04x:%08x\n", seg, ip);
while(1);
}
-void __attribute__ ((regparm(0))) debug_exception_entry(int cause, int ip, int seg)
+void __attribute__ ((regparm(0))) debug_exception_entry(int cause, int ip, int seg)
{
printf("Debug Interrupt (Single step) at %04x:%08x\n", seg, ip);
}
-void __attribute__ ((regparm(0))) nmi_entry(int cause, int ip, int seg)
+void __attribute__ ((regparm(0))) nmi_entry(int cause, int ip, int seg)
{
printf("NMI Interrupt at %04x:%08x\n", seg, ip);
}
-
-void __attribute__ ((regparm(0))) invalid_instruction_entry(int cause, int ip, int seg)
+
+void __attribute__ ((regparm(0))) invalid_instruction_entry(int cause, int ip, int seg)
{
printf("Invalid Instruction at %04x:%08x\n", seg, ip);
while(1);
}
-
-void __attribute__ ((regparm(0))) double_fault_entry(int cause, int ip, int seg)
+
+void __attribute__ ((regparm(0))) double_fault_entry(int cause, int ip, int seg)
{
printf("Double fault at %04x:%08x\n", seg, ip);
while(1);
}
-void __attribute__ ((regparm(0))) invalid_tss_exception_entry(int cause, int ip, int seg)
+void __attribute__ ((regparm(0))) invalid_tss_exception_entry(int cause, int ip, int seg)
{
printf("Invalid TSS at %04x:%08x\n", seg, ip);
}
-
-void __attribute__ ((regparm(0))) seg_fault_entry(int cause, int ip, int seg)
+
+void __attribute__ ((regparm(0))) seg_fault_entry(int cause, int ip, int seg)
{
printf("Segmentation fault at %04x:%08x\n", seg, ip);
while(1);
}
-void __attribute__ ((regparm(0))) stack_fault_entry(int cause, int ip, int seg)
+void __attribute__ ((regparm(0))) stack_fault_entry(int cause, int ip, int seg)
{
printf("Stack fault at %04x:%08x\n", seg, ip);
while(1);
}
-void __attribute__ ((regparm(0))) gpf_entry(int cause, int ip, int seg)
+void __attribute__ ((regparm(0))) gpf_entry(int cause, int ip, int seg)
{
printf("General protection fault at %04x:%08x\n", seg, ip);
}
-void __attribute__ ((regparm(0))) page_fault_entry(int cause, int ip, int seg)
+void __attribute__ ((regparm(0))) page_fault_entry(int cause, int ip, int seg)
{
printf("Page fault at %04x:%08x\n", seg, ip);
while(1);
}
-void __attribute__ ((regparm(0))) fp_exception_entry(int cause, int ip, int seg)
+void __attribute__ ((regparm(0))) fp_exception_entry(int cause, int ip, int seg)
{
printf("Floating point exception at %04x:%08x\n", seg, ip);
}
-void __attribute__ ((regparm(0))) alignment_check_entry(int cause, int ip, int seg)
+void __attribute__ ((regparm(0))) alignment_check_entry(int cause, int ip, int seg)
{
printf("Alignment check at %04x:%08x\n", seg, ip);
}
-
-void __attribute__ ((regparm(0))) machine_check_entry(int cause, int ip, int seg)
+
+void __attribute__ ((regparm(0))) machine_check_entry(int cause, int ip, int seg)
{
printf("Machine check exception at %04x:%08x\n", seg, ip);
}
@@ -350,31 +348,31 @@ void __attribute__ ((regparm(0))) machine_check_entry(int cause, int ip, int seg
void irq_install_handler(int ino, interrupt_handler_t *func, void *pdata)
{
int status;
-
+
if (ino>MAX_IRQ) {
return;
}
-
+
if (NULL != irq_table[ino].handler) {
return;
}
-
+
status = disable_interrupts();
irq_table[ino].handler = malloc(sizeof(irq_handler_t));
if (NULL == irq_table[ino].handler) {
return;
}
-
+
memset(irq_table[ino].handler, 0, sizeof(irq_handler_t));
-
+
irq_table[ino].handler->isr_func = func;
irq_table[ino].handler->isr_data = pdata;
if (status) {
enable_interrupts();
}
-
+
unmask_irq(ino);
-
+
return;
}
@@ -384,7 +382,7 @@ void irq_free_handler(int ino)
if (ino>MAX_IRQ) {
return;
}
-
+
status = disable_interrupts();
mask_irq(ino);
if (NULL == irq_table[ino].handler) {
@@ -406,33 +404,33 @@ asm ("idt_ptr:\n"
static void set_vector(int intnum, void *routine)
{
- idt[intnum].base_high = (u16)((u32)(routine)>>16);
- idt[intnum].base_low = (u16)((u32)(routine)&0xffff);
+ idt[intnum].base_high = (u16)((u32)(routine)>>16);
+ idt[intnum].base_low = (u16)((u32)(routine)&0xffff);
}
int interrupt_init(void)
{
int i;
-
+
/* Just in case... */
disable_interrupts();
-
+
/* Initialize the IDT and stuff */
-
-
+
+
memset(irq_table, 0, sizeof(irq_table));
/* Setup the IDT */
- for (i=0;i<256;i++) {
+ for (i=0;i<256;i++) {
idt[i].access = 0x8e;
- idt[i].res = 0;
- idt[i].selector = 0x10;
+ idt[i].res = 0;
+ idt[i].selector = 0x10;
set_vector(i, default_isr);
- }
-
+ }
+
asm ("cs lidt idt_ptr\n");
-
+
/* Setup exceptions */
set_vector(0x00, exp_0);
set_vector(0x01, exp_1);
@@ -487,39 +485,39 @@ int interrupt_init(void)
/* vectors 0x30-0x3f are reserved for irq 16-31 */
set_vector(0x40, syscall_entry);
-
+
/* Mask all interrupts */
outb(0xff, MASTER_PIC + IMR);
outb(0xff, SLAVE_PIC + IMR);
-
+
/* Master PIC */
- outb(ICW1_SEL|ICW1_EICW4, MASTER_PIC + ICW1);
+ outb(ICW1_SEL|ICW1_EICW4, MASTER_PIC + ICW1);
outb(0x20, MASTER_PIC + ICW2); /* Place master PIC interrupts at INT20 */
- outb(IR2, MASTER_PIC + ICW3); /* ICW3, One slevc PIC is present */
+ outb(IR2, MASTER_PIC + ICW3); /* ICW3, One slevc PIC is present */
outb(ICW4_PM, MASTER_PIC + ICW4);
-
+
for (i=0;i<8;i++) {
outb(OCW2_SEOI|i, MASTER_PIC + OCW2);
}
-
+
/* Slave PIC */
- outb(ICW1_SEL|ICW1_EICW4, SLAVE_PIC + ICW1);
+ outb(ICW1_SEL|ICW1_EICW4, SLAVE_PIC + ICW1);
outb(0x28, SLAVE_PIC + ICW2); /* Place slave PIC interrupts at INT28 */
outb(0x02, SLAVE_PIC + ICW3); /* Slave ID */
- outb(ICW4_PM, SLAVE_PIC + ICW4);
-
+ outb(ICW4_PM, SLAVE_PIC + ICW4);
+
for (i=0;i<8;i++) {
outb(OCW2_SEOI|i, SLAVE_PIC + OCW2);
}
-
-
+
+
/* enable cascade interrerupt */
outb(0xfb, MASTER_PIC + IMR);
outb(0xff, SLAVE_PIC + IMR);
-
+
/* It is now safe to enable interrupts */
- enable_interrupts();
-
+ enable_interrupts();
+
return 0;
}
@@ -531,9 +529,9 @@ void enable_interrupts(void)
int disable_interrupts(void)
{
long flags;
-
+
asm volatile ("pushfl ; popl %0 ; cli\n" : "=g" (flags) : );
-
+
return (flags&0x200); /* IE flags is bit 9 */
}
@@ -541,9 +539,9 @@ int disable_interrupts(void)
#ifdef CFG_RESET_GENERIC
void __attribute__ ((regparm(0))) generate_gpf(void);
-asm(".globl generate_gpf\n"
- "generate_gpf:\n"
- "ljmp $0x70, $0x47114711\n"); /* segment 0x70 is an arbitrary segment which does not
+asm(".globl generate_gpf\n"
+ "generate_gpf:\n"
+ "ljmp $0x70, $0x47114711\n"); /* segment 0x70 is an arbitrary segment which does not
* exist */
void reset_cpu(ulong addr)
{
diff --git a/cpu/i386/reset.S b/cpu/i386/reset.S
index 57e32a8b7f..07a7384927 100644
--- a/cpu/i386/reset.S
+++ b/cpu/i386/reset.S
@@ -1,5 +1,5 @@
/*
- * U-boot - i386 Startup Code
+ * U-boot - i386 Startup Code
*
* Copyright (c) 2002 Omicron Ceti AB, Daniel Engström <denaiel@omicron.se>
*
@@ -28,11 +28,10 @@
.section .reset, "ax"
.code16
-reset_vector:
- cli
- cld
- jmp start16
+reset_vector:
+ cli
+ cld
+ jmp start16
.org 0xf
nop
-
diff --git a/cpu/i386/sc520.c b/cpu/i386/sc520.c
index 500089a158..689e775c93 100644
--- a/cpu/i386/sc520.c
+++ b/cpu/i386/sc520.c
@@ -36,26 +36,26 @@
#include <asm/pci.h>
#include <asm/ic/sc520.h>
-/*
- * utility functions for boards based on the AMD sc520
- *
+/*
+ * utility functions for boards based on the AMD sc520
+ *
* void write_mmcr_byte(u16 mmcr, u8 data)
* void write_mmcr_word(u16 mmcr, u16 data)
* void write_mmcr_long(u16 mmcr, u32 data)
- *
+ *
* u8 read_mmcr_byte(u16 mmcr)
* u16 read_mmcr_word(u16 mmcr)
* u32 read_mmcr_long(u16 mmcr)
- *
+ *
* void init_sc520(void)
* unsigned long init_sc520_dram(void)
* void pci_sc520_init(struct pci_controller *hose)
- *
+ *
* void reset_timer(void)
* ulong get_timer(ulong base)
* void set_timer(ulong t)
* void udelay(unsigned long usec)
- *
+ *
*/
static u32 mmcr_base= 0xfffef000;
@@ -67,7 +67,7 @@ void write_mmcr_byte(u16 mmcr, u8 data)
void write_mmcr_word(u16 mmcr, u16 data)
{
- writew(data, mmcr+mmcr_base);
+ writew(data, mmcr+mmcr_base);
}
void write_mmcr_long(u16 mmcr, u32 data)
@@ -82,7 +82,7 @@ u8 read_mmcr_byte(u16 mmcr)
u16 read_mmcr_word(u16 mmcr)
{
- return readw(mmcr+mmcr_base);
+ return readw(mmcr+mmcr_base);
}
u32 read_mmcr_long(u16 mmcr)
@@ -94,19 +94,19 @@ u32 read_mmcr_long(u16 mmcr)
void init_sc520(void)
{
DECLARE_GLOBAL_DATA_PTR;
-
+
/* Set the UARTxCTL register at it's slower,
- * baud clock giving us a 1.8432 MHz reference
+ * baud clock giving us a 1.8432 MHz reference
*/
write_mmcr_byte(SC520_UART1CTL, 7);
write_mmcr_byte(SC520_UART2CTL, 7);
-
+
/* first set the timer pin mapping */
write_mmcr_byte(SC520_CLKSEL, 0x72); /* no clock frequency selected, use 1.1892MHz */
-
+
/* enable PCI bus arbitrer */
write_mmcr_byte(SC520_SYSARBCTL,0x02); /* enable concurrent mode */
-
+
write_mmcr_word(SC520_SYSARBMENB,0x1f); /* enable external grants */
write_mmcr_word(SC520_HBCTL,0x04); /* enable posted-writes */
@@ -120,10 +120,10 @@ void init_sc520(void)
printf("## CPU Speed set to 100MHz\n");
gd->cpu_clk = 100000000;
}
-
+
/* wait at least one millisecond */
- asm("movl $0x2000,%%ecx\n"
+ asm("movl $0x2000,%%ecx\n"
"wait_loop: pushl %%ecx\n"
"popl %%ecx\n"
"loop wait_loop\n": : : "ecx");
@@ -141,19 +141,19 @@ unsigned long init_sc520_dram(void)
{
DECLARE_GLOBAL_DATA_PTR;
bd_t *bd = gd->bd;
-
+
u32 dram_present=0;
u32 dram_ctrl;
int val;
-
- int cas_precharge_delay = CFG_SDRAM_PRECHARGE_DELAY;
- int refresh_rate = CFG_SDRAM_REFRESH_RATE;
+
+ int cas_precharge_delay = CFG_SDRAM_PRECHARGE_DELAY;
+ int refresh_rate = CFG_SDRAM_REFRESH_RATE;
int ras_cas_delay = CFG_SDRAM_RAS_CAS_DELAY;
-
+
/* set SDRAM speed here */
-
- refresh_rate/=78;
+
+ refresh_rate/=78;
if (refresh_rate<=1) {
val = 0; /* 7.8us */
} else if (refresh_rate==2) {
@@ -164,22 +164,22 @@ unsigned long init_sc520_dram(void)
val = 3; /* 62.4us */
}
write_mmcr_byte(SC520_DRCCTL, (read_mmcr_byte(SC520_DRCCTL) & 0xcf) | (val<<4));
-
+
val = read_mmcr_byte(SC520_DRCTMCTL);
val &= 0xf0;
-
- if (cas_precharge_delay==3) {
+
+ if (cas_precharge_delay==3) {
val |= 0x04; /* 3T */
- } else if (cas_precharge_delay==4) {
+ } else if (cas_precharge_delay==4) {
val |= 0x08; /* 4T */
- } else if (cas_precharge_delay>4) {
+ } else if (cas_precharge_delay>4) {
val |= 0x0c;
- }
-
+ }
+
if (ras_cas_delay > 3) {
- val |= 2;
+ val |= 2;
} else {
- val |= 1;
+ val |= 1;
}
write_mmcr_byte(SC520_DRCTMCTL, val);
@@ -187,37 +187,37 @@ unsigned long init_sc520_dram(void)
/* We read-back the configuration of the dram
* controller that the assembly code wrote */
dram_ctrl = read_mmcr_long(SC520_DRCBENDADR);
-
+
bd->bi_dram[0].start = 0;
if (dram_ctrl & 0x80) {
/* bank 0 enabled */
dram_present = bd->bi_dram[1].start = (dram_ctrl & 0x7f) << 22;
- bd->bi_dram[0].size = bd->bi_dram[1].start;
+ bd->bi_dram[0].size = bd->bi_dram[1].start;
} else {
bd->bi_dram[0].size = 0;
bd->bi_dram[1].start = bd->bi_dram[0].start;
}
-
+
if (dram_ctrl & 0x8000) {
/* bank 1 enabled */
dram_present = bd->bi_dram[2].start = (dram_ctrl & 0x7f00) << 14;
- bd->bi_dram[1].size = bd->bi_dram[2].start - bd->bi_dram[1].start;
+ bd->bi_dram[1].size = bd->bi_dram[2].start - bd->bi_dram[1].start;
} else {
bd->bi_dram[1].size = 0;
bd->bi_dram[2].start = bd->bi_dram[1].start;
}
-
+
if (dram_ctrl & 0x800000) {
/* bank 2 enabled */
dram_present = bd->bi_dram[3].start = (dram_ctrl & 0x7f0000) << 6;
- bd->bi_dram[2].size = bd->bi_dram[3].start - bd->bi_dram[2].start;
+ bd->bi_dram[2].size = bd->bi_dram[3].start - bd->bi_dram[2].start;
} else {
bd->bi_dram[2].size = 0;
bd->bi_dram[3].start = bd->bi_dram[2].start;
- }
-
+ }
+
if (dram_ctrl & 0x80000000) {
/* bank 3 enabled */
dram_present = (dram_ctrl & 0x7f000000) >> 2;
@@ -226,12 +226,12 @@ unsigned long init_sc520_dram(void)
bd->bi_dram[3].size = 0;
}
-
-#if 0
+
+#if 0
printf("Configured %d bytes of dram\n", dram_present);
-#endif
+#endif
gd->ram_size = dram_present;
-
+
return dram_present;
}
@@ -265,19 +265,19 @@ static struct {
/* The interrupt used for PCI INTA-INTD */
-int sc520_pci_ints[15] = {
+int sc520_pci_ints[15] = {
-1, -1, -1, -1, -1, -1, -1, -1,
-1, -1, -1, -1, -1, -1, -1
};
/* utility function to configure a pci interrupt */
-int pci_sc520_set_irq(int pci_pin, int irq)
+int pci_sc520_set_irq(int pci_pin, int irq)
{
int i;
-
+
# if 0
printf("set_irq(): map INT%c to IRQ%d\n", pci_pin + 'A', irq);
-#endif
+#endif
if (irq < 0 || irq > 15) {
return -1; /* illegal irq */
}
@@ -286,7 +286,7 @@ int pci_sc520_set_irq(int pci_pin, int irq)
return -1; /* illegal pci int pin */
}
- /* first disable any non-pci interrupt source that use
+ /* first disable any non-pci interrupt source that use
* this level */
for (i=SC520_GPTMR0MAP;i<=SC520_GP10IMAP;i++) {
if (i>=SC520_PCIINTAMAP&&i<=SC520_PCIINTDMAP) {
@@ -296,31 +296,31 @@ int pci_sc520_set_irq(int pci_pin, int irq)
write_mmcr_byte(i, SC520_IRQ_DISABLED);
}
}
-
+
/* Set the trigger to level */
- write_mmcr_byte(sc520_irq[irq].level_reg,
+ write_mmcr_byte(sc520_irq[irq].level_reg,
read_mmcr_byte(sc520_irq[irq].level_reg) | sc520_irq[irq].level_bit);
-
-
+
+
if (pci_pin < 4) {
/* PCI INTA-INTD */
/* route the interrupt */
write_mmcr_byte(SC520_PCIINTAMAP + pci_pin, sc520_irq[irq].priority);
-
-
+
+
} else {
/* GPIRQ0-GPIRQ10 used for additional PCI INTS */
write_mmcr_byte(SC520_GP0IMAP + pci_pin - 4, sc520_irq[irq].priority);
-
+
/* also set the polarity in this case */
- write_mmcr_word(SC520_INTPINPOL,
+ write_mmcr_word(SC520_INTPINPOL,
read_mmcr_word(SC520_INTPINPOL) | (1 << (pci_pin-4)));
-
+
}
-
- /* register the pin */
+
+ /* register the pin */
sc520_pci_ints[pci_pin] = irq;
-
+
return 0; /* OK */
}
@@ -331,35 +331,35 @@ void pci_sc520_init(struct pci_controller *hose)
hose->last_busno = 0xff;
/* System memory space */
- pci_set_region(hose->regions + 0,
+ pci_set_region(hose->regions + 0,
SC520_PCI_MEMORY_BUS,
SC520_PCI_MEMORY_PHYS,
SC520_PCI_MEMORY_SIZE,
PCI_REGION_MEM | PCI_REGION_MEMORY);
/* PCI memory space */
- pci_set_region(hose->regions + 1,
+ pci_set_region(hose->regions + 1,
SC520_PCI_MEM_BUS,
SC520_PCI_MEM_PHYS,
SC520_PCI_MEM_SIZE,
PCI_REGION_MEM);
/* ISA/PCI memory space */
- pci_set_region(hose->regions + 2,
+ pci_set_region(hose->regions + 2,
SC520_ISA_MEM_BUS,
SC520_ISA_MEM_PHYS,
SC520_ISA_MEM_SIZE,
PCI_REGION_MEM);
/* PCI I/O space */
- pci_set_region(hose->regions + 3,
+ pci_set_region(hose->regions + 3,
SC520_PCI_IO_BUS,
SC520_PCI_IO_PHYS,
SC520_PCI_IO_SIZE,
PCI_REGION_IO);
/* ISA/PCI I/O space */
- pci_set_region(hose->regions + 4,
+ pci_set_region(hose->regions + 4,
SC520_ISA_IO_BUS,
SC520_ISA_IO_PHYS,
SC520_ISA_IO_SIZE,
@@ -374,15 +374,14 @@ void pci_sc520_init(struct pci_controller *hose)
pci_register_hose(hose);
hose->last_busno = pci_hose_scan(hose);
-
+
/* enable target memory acceses on host brige */
- pci_write_config_word(0, PCI_COMMAND,
+ pci_write_config_word(0, PCI_COMMAND,
PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER);
}
-
#endif
#ifdef CFG_TIMER_SC520
@@ -392,7 +391,7 @@ void reset_timer(void)
{
write_mmcr_word(SC520_GPTMR0CNT, 0);
write_mmcr_word(SC520_GPTMR0CTL, 0x6001);
-
+
}
ulong get_timer(ulong base)
@@ -414,19 +413,19 @@ void udelay(unsigned long usec)
{
int m=0;
long u;
-
+
read_mmcr_word(SC520_SWTMRMILLI);
read_mmcr_word(SC520_SWTMRMICRO);
-
+
#if 0
/* do not enable this line, udelay is used in the serial driver -> recursion */
printf("udelay: %ld m.u %d.%d tm.tu %d.%d\n", usec, m, u, tm, tu);
-#endif
+#endif
while (1) {
-
+
m += read_mmcr_word(SC520_SWTMRMILLI);
u = read_mmcr_word(SC520_SWTMRMICRO) + (m * 1000);
-
+
if (usec <= u) {
break;
}
@@ -440,13 +439,13 @@ int ssi_set_interface(int freq, int lsb_first, int inv_clock, int inv_phase)
u8 temp=0;
if (freq >= 8192) {
- temp |= CTL_CLK_SEL_4;
+ temp |= CTL_CLK_SEL_4;
} else if (freq >= 4096) {
- temp |= CTL_CLK_SEL_8;
+ temp |= CTL_CLK_SEL_8;
} else if (freq >= 2048) {
- temp |= CTL_CLK_SEL_16;
+ temp |= CTL_CLK_SEL_16;
} else if (freq >= 1024) {
- temp |= CTL_CLK_SEL_32;
+ temp |= CTL_CLK_SEL_32;
} else if (freq >= 512) {
temp |= CTL_CLK_SEL_64;
} else if (freq >= 256) {
@@ -456,47 +455,47 @@ int ssi_set_interface(int freq, int lsb_first, int inv_clock, int inv_phase)
} else {
temp |= CTL_CLK_SEL_512;
}
-
+
if (!lsb_first) {
temp |= MSBF_ENB;
}
-
+
if (inv_clock) {
temp |= CLK_INV_ENB;
}
-
+
if (inv_phase) {
temp |= PHS_INV_ENB;
}
-
+
write_mmcr_byte(SC520_SSICTL, temp);
-
+
return 0;
}
-u8 ssi_txrx_byte(u8 data)
+u8 ssi_txrx_byte(u8 data)
{
write_mmcr_byte(SC520_SSIXMIT, data);
while ((read_mmcr_byte(SC520_SSISTA)) & SSISTA_BSY);
write_mmcr_byte(SC520_SSICMD, SSICMD_CMD_SEL_XMITRCV);
while ((read_mmcr_byte(SC520_SSISTA)) & SSISTA_BSY);
- return read_mmcr_byte(SC520_SSIRCV);
-}
+ return read_mmcr_byte(SC520_SSIRCV);
+}
-void ssi_tx_byte(u8 data)
+void ssi_tx_byte(u8 data)
{
write_mmcr_byte(SC520_SSIXMIT, data);
- while ((read_mmcr_byte(SC520_SSISTA)) & SSISTA_BSY);
+ while ((read_mmcr_byte(SC520_SSISTA)) & SSISTA_BSY);
write_mmcr_byte(SC520_SSICMD, SSICMD_CMD_SEL_XMIT);
}
-u8 ssi_rx_byte(void)
+u8 ssi_rx_byte(void)
{
while ((read_mmcr_byte(SC520_SSISTA)) & SSISTA_BSY);
write_mmcr_byte(SC520_SSICMD, SSICMD_CMD_SEL_RCV);
while ((read_mmcr_byte(SC520_SSISTA)) & SSISTA_BSY);
return read_mmcr_byte(SC520_SSIRCV);
-}
+}
#endif /* CONFIG_SC520 */
diff --git a/cpu/i386/sc520_asm.S b/cpu/i386/sc520_asm.S
index 7a957c7664..80464fa78b 100644
--- a/cpu/i386/sc520_asm.S
+++ b/cpu/i386/sc520_asm.S
@@ -22,21 +22,21 @@
*/
/* This file is largely based on code obtned from AMD. AMD's original
- * copyright is included below
+ * copyright is included below
*/
/*
* =============================================================================
- *
- * Copyright 1999 Advanced Micro Devices, Inc.
- *
- * This software is the property of Advanced Micro Devices, Inc (AMD) which
- * specifically grants the user the right to modify, use and distribute this
- * software provided this COPYRIGHT NOTICE is not removed or altered. All
- * other rights are reserved by AMD.
- *
- * THE MATERIALS ARE PROVIDED "AS IS" WITHOUT ANY EXPRESS OR IMPLIED WARRANTY
- * OF ANY KIND INCLUDING WARRANTIES OF MERCHANTABILITY, NONINFRINGEMENT OF
+ *
+ * Copyright 1999 Advanced Micro Devices, Inc.
+ *
+ * This software is the property of Advanced Micro Devices, Inc (AMD) which
+ * specifically grants the user the right to modify, use and distribute this
+ * software provided this COPYRIGHT NOTICE is not removed or altered. All
+ * other rights are reserved by AMD.
+ *
+ * THE MATERIALS ARE PROVIDED "AS IS" WITHOUT ANY EXPRESS OR IMPLIED WARRANTY
+ * OF ANY KIND INCLUDING WARRANTIES OF MERCHANTABILITY, NONINFRINGEMENT OF
* THIRD-PARTY INTELLECTUAL PROPERTY, OR FITNESS FOR ANY PARTICULAR PURPOSE.
* IN NO EVENT SHALL AMD OR ITS SUPPLIERS BE LIABLE FOR ANY DAMAGES WHATSOEVER
* (INCLUDING, WITHOUT LIMITATION, DAMAGES FOR LOSS OF PROFITS, BUSINESS
@@ -45,19 +45,19 @@
* SUCH DAMAGES. BECAUSE SOME JURSIDICTIONS PROHIBIT THE EXCLUSION OR
* LIMITATION OF LIABILITY FOR CONSEQUENTIAL OR INCIDENTAL DAMAGES, THE ABOVE
* LIMITATION MAY NOT APPLY TO YOU.
- *
+ *
* AMD does not assume any responsibility for any errors that may appear in
* the Materials nor any responsibility to support or update the Materials.
* AMD retains the right to make changes to its test specifications at any
* time, without notice.
- *
- * So that all may benefit from your experience, please report any problems
- * or suggestions about this software back to AMD. Please include your name,
- * company, telephone number, AMD product requiring support and question or
- * problem encountered.
- *
- * Advanced Micro Devices, Inc. Worldwide support and contact
- * Embedded Processor Division information available at:
+ *
+ * So that all may benefit from your experience, please report any problems
+ * or suggestions about this software back to AMD. Please include your name,
+ * company, telephone number, AMD product requiring support and question or
+ * problem encountered.
+ *
+ * Advanced Micro Devices, Inc. Worldwide support and contact
+ * Embedded Processor Division information available at:
* Systems Engineering epd.support@amd.com
* 5204 E. Ben White Blvd. -or-
* Austin, TX 78741 http://www.amd.com/html/support/techsup.html
@@ -66,7 +66,7 @@
/*******************************************************************************
- * AUTHOR : Buddy Fey - Original.
+ * AUTHOR : Buddy Fey - Original.
*******************************************************************************
*/
@@ -140,368 +140,368 @@
* initialize dram controller registers
*/
.globl mem_init
-mem_init:
- xorw %ax,%ax
- movl $DBCTL, %edi
+mem_init:
+ xorw %ax,%ax
+ movl $DBCTL, %edi
movb %al, (%edi) /* disable write buffer */
- movl $ECCCTL, %edi
+ movl $ECCCTL, %edi
movb %al, (%edi) /* disable ECC */
- movl $DRCTMCTL, %edi
- movb $0x1E,%al /* Set SDRAM timing for slowest */
+ movl $DRCTMCTL, %edi
+ movb $0x1E,%al /* Set SDRAM timing for slowest */
movb %al, (%edi)
/*
* setup loop to do 4 external banks starting with bank 3
*/
- movl $0xff000000,%eax /* enable last bank and setup */
- movl $DRCBENDADR, %edi /* ending address register */
+ movl $0xff000000,%eax /* enable last bank and setup */
+ movl $DRCBENDADR, %edi /* ending address register */
movl %eax, (%edi)
- movl $DRCCFG, %edi /* setup */
- movw $0xbbbb,%ax /* dram config register for */
+ movl $DRCCFG, %edi /* setup */
+ movw $0xbbbb,%ax /* dram config register for */
movw %ax, (%edi)
/*
* issue a NOP to all DRAMs
*/
- movl $DRCCTL, %edi /* setup DRAM control register with */
- movb $0x1,%al /* Disable refresh,disable write buffer */
+ movl $DRCCTL, %edi /* setup DRAM control register with */
+ movb $0x1,%al /* Disable refresh,disable write buffer */
movb %al, (%edi)
- movl $CACHELINESZ, %esi /* just a dummy address to write for */
+ movl $CACHELINESZ, %esi /* just a dummy address to write for */
movw %ax, (%esi)
/*
* delay for 100 usec? 200?
* ******this is a cludge for now *************
*/
- movw $100,%cx
-sizdelay:
- loop sizdelay /* we need 100 usec here */
+ movw $100,%cx
+sizdelay:
+ loop sizdelay /* we need 100 usec here */
/***********************************************/
/*
* issue all banks precharge
*/
- movb $0x2,%al /* All banks precharge */
+ movb $0x2,%al /* All banks precharge */
movb %al, (%edi)
movw %ax, (%esi)
/*
- * issue 2 auto refreshes to all banks
+ * issue 2 auto refreshes to all banks
*/
- movb $0x4,%al /* Auto refresh cmd */
+ movb $0x4,%al /* Auto refresh cmd */
movb %al, (%edi)
- movw $2,%cx
-refresh1:
+ movw $2,%cx
+refresh1:
movw %ax, (%esi)
- loop refresh1
+ loop refresh1
/*
* issue LOAD MODE REGISTER command
*/
- movb $0x3,%al /* Load mode register cmd */
+ movb $0x3,%al /* Load mode register cmd */
movb %al, (%edi)
movw %ax, (%esi)
/*
- * issue 8 more auto refreshes to all banks
- */
- movb $0x4,%al /* Auto refresh cmd */
+ * issue 8 more auto refreshes to all banks
+ */
+ movb $0x4,%al /* Auto refresh cmd */
movb %al, (%edi)
- movw $8,%cx
-refresh2:
+ movw $8,%cx
+refresh2:
movw %ax, (%esi)
- loop refresh2
+ loop refresh2
/*
- * set control register to NORMAL mode
+ * set control register to NORMAL mode
*/
- movb $0x0,%al /* Normal mode value */
+ movb $0x0,%al /* Normal mode value */
movb %al, (%edi)
/*
* size dram starting with external bank 3 moving to external bank 0
*/
- movl $0x3,%ecx /* start with external bank 3 */
+ movl $0x3,%ecx /* start with external bank 3 */
-nextbank:
+nextbank:
/*
* write col 11 wrap adr
*/
- movl $COL11_ADR, %esi /* set address to max col (11) wrap addr */
- movl $COL11_DATA, %eax /* pattern for max supported columns(11) */
+ movl $COL11_ADR, %esi /* set address to max col (11) wrap addr */
+ movl $COL11_DATA, %eax /* pattern for max supported columns(11) */
movl %eax, (%esi) /* write max col pattern at max col adr */
movl (%esi), %ebx /* optional read */
- cmpl %ebx,%eax /* to verify write */
- jnz bad_ram /* this ram is bad */
+ cmpl %ebx,%eax /* to verify write */
+ jnz bad_ram /* this ram is bad */
/*
* write col 10 wrap adr
*/
- movl $COL10_ADR, %esi /* set address to 10 col wrap address */
- movl $COL10_DATA, %eax /* pattern for 10 col wrap */
+ movl $COL10_ADR, %esi /* set address to 10 col wrap address */
+ movl $COL10_DATA, %eax /* pattern for 10 col wrap */
movl %eax, (%esi) /* write 10 col pattern @ 10 col wrap adr */
movl (%esi), %ebx /* optional read */
- cmpl %ebx,%eax /* to verify write */
- jnz bad_ram /* this ram is bad */
+ cmpl %ebx,%eax /* to verify write */
+ jnz bad_ram /* this ram is bad */
/*
* write col 9 wrap adr
*/
- movl $COL09_ADR, %esi /* set address to 9 col wrap address */
- movl $COL09_DATA, %eax /* pattern for 9 col wrap */
+ movl $COL09_ADR, %esi /* set address to 9 col wrap address */
+ movl $COL09_DATA, %eax /* pattern for 9 col wrap */
movl %eax, (%esi) /* write 9 col pattern @ 9 col wrap adr */
movl (%esi), %ebx /* optional read */
- cmpl %ebx,%eax /* to verify write */
- jnz bad_ram /* this ram is bad */
+ cmpl %ebx,%eax /* to verify write */
+ jnz bad_ram /* this ram is bad */
/*
* write col 8 wrap adr
*/
- movl $COL08_ADR, %esi /* set address to min(8) col wrap address */
- movl $COL08_DATA, %eax /* pattern for min (8) col wrap */
+ movl $COL08_ADR, %esi /* set address to min(8) col wrap address */
+ movl $COL08_DATA, %eax /* pattern for min (8) col wrap */
movl %eax, (%esi) /* write min col pattern @ min col adr */
movl (%esi), %ebx /* optional read */
- cmpl %ebx,%eax /* to verify write */
- jnz bad_ram /* this ram is bad */
+ cmpl %ebx,%eax /* to verify write */
+ jnz bad_ram /* this ram is bad */
/*
* write row 14 wrap adr
*/
- movl $ROW14_ADR, %esi /* set address to max row (14) wrap addr */
- movl $ROW14_DATA, %eax /* pattern for max supported rows(14) */
+ movl $ROW14_ADR, %esi /* set address to max row (14) wrap addr */
+ movl $ROW14_DATA, %eax /* pattern for max supported rows(14) */
movl %eax, (%esi) /* write max row pattern at max row adr */
movl (%esi), %ebx /* optional read */
- cmpl %ebx,%eax /* to verify write */
- jnz bad_ram /* this ram is bad */
+ cmpl %ebx,%eax /* to verify write */
+ jnz bad_ram /* this ram is bad */
/*
* write row 13 wrap adr
*/
- movl $ROW13_ADR, %esi /* set address to 13 row wrap address */
- movl $ROW13_DATA, %eax /* pattern for 13 row wrap */
+ movl $ROW13_ADR, %esi /* set address to 13 row wrap address */
+ movl $ROW13_DATA, %eax /* pattern for 13 row wrap */
movl %eax, (%esi) /* write 13 row pattern @ 13 row wrap adr */
movl (%esi), %ebx /* optional read */
- cmpl %ebx,%eax /* to verify write */
- jnz bad_ram /* this ram is bad */
+ cmpl %ebx,%eax /* to verify write */
+ jnz bad_ram /* this ram is bad */
/*
* write row 12 wrap adr
*/
- movl $ROW12_ADR, %esi /* set address to 12 row wrap address */
- movl $ROW12_DATA, %eax /* pattern for 12 row wrap */
+ movl $ROW12_ADR, %esi /* set address to 12 row wrap address */
+ movl $ROW12_DATA, %eax /* pattern for 12 row wrap */
movl %eax, (%esi) /* write 12 row pattern @ 12 row wrap adr */
movl (%esi), %ebx /* optional read */
- cmpl %ebx,%eax /* to verify write */
- jnz bad_ram /* this ram is bad */
+ cmpl %ebx,%eax /* to verify write */
+ jnz bad_ram /* this ram is bad */
/*
* write row 11 wrap adr
*/
- movl $ROW11_ADR, %edi /* set address to 11 row wrap address */
- movl $ROW11_DATA, %eax /* pattern for 11 row wrap */
+ movl $ROW11_ADR, %edi /* set address to 11 row wrap address */
+ movl $ROW11_DATA, %eax /* pattern for 11 row wrap */
movl %eax, (%edi) /* write 11 row pattern @ 11 row wrap adr */
movl (%edi), %ebx /* optional read */
- cmpl %ebx,%eax /* to verify write */
- jnz bad_ram /* this ram is bad */
+ cmpl %ebx,%eax /* to verify write */
+ jnz bad_ram /* this ram is bad */
/*
* write row 10 wrap adr --- this write is really to determine number of banks
*/
- movl $ROW10_ADR, %edi /* set address to 10 row wrap address */
- movl $ROW10_DATA, %eax /* pattern for 10 row wrap (AA) */
+ movl $ROW10_ADR, %edi /* set address to 10 row wrap address */
+ movl $ROW10_DATA, %eax /* pattern for 10 row wrap (AA) */
movl %eax, (%edi) /* write 10 row pattern @ 10 row wrap adr */
movl (%edi), %ebx /* optional read */
- cmpl %ebx,%eax /* to verify write */
- jnz bad_ram /* this ram is bad */
+ cmpl %ebx,%eax /* to verify write */
+ jnz bad_ram /* this ram is bad */
/*
- * read data @ row 12 wrap adr to determine * banks,
+ * read data @ row 12 wrap adr to determine * banks,
* and read data @ row 14 wrap adr to determine * rows.
* if data @ row 12 wrap adr is not AA, 11 or 12 we have bad RAM.
- * if data @ row 12 wrap == AA, we only have 2 banks, NOT 4
+ * if data @ row 12 wrap == AA, we only have 2 banks, NOT 4
* if data @ row 12 wrap == 11 or 12, we have 4 banks,
*/
- xorw %di,%di /* value for 2 banks in DI */
- movl (%esi), %ebx /* read from 12 row wrap to check banks
- * (esi is setup from the write to row 12 wrap) */
- cmpl %ebx,%eax /* check for AA pattern (eax holds the aa pattern) */
- jz only2 /* if pattern == AA, we only have 2 banks */
+ xorw %di,%di /* value for 2 banks in DI */
+ movl (%esi), %ebx /* read from 12 row wrap to check banks
+ * (esi is setup from the write to row 12 wrap) */
+ cmpl %ebx,%eax /* check for AA pattern (eax holds the aa pattern) */
+ jz only2 /* if pattern == AA, we only have 2 banks */
/* 4 banks */
-
- movw $8,%di /* value for 4 banks in DI (BNK_CNT bit) */
- cmpl $ROW11_DATA, %ebx /* only other legitimate values are 11 */
- jz only2
- cmpl $ROW12_DATA, %ebx /* and 12 */
- jnz bad_ram /* its bad if not 11 or 12! */
-
+
+ movw $8,%di /* value for 4 banks in DI (BNK_CNT bit) */
+ cmpl $ROW11_DATA, %ebx /* only other legitimate values are 11 */
+ jz only2
+ cmpl $ROW12_DATA, %ebx /* and 12 */
+ jnz bad_ram /* its bad if not 11 or 12! */
+
/* fall through */
-only2:
+only2:
/*
* validate row mask
*/
- movl $ROW14_ADR, %esi /* set address back to max row wrap addr */
+ movl $ROW14_ADR, %esi /* set address back to max row wrap addr */
movl (%esi), %eax /* read actual number of rows @ row14 adr */
- cmpl $ROW11_DATA, %eax /* row must be greater than 11 pattern */
- jb bad_ram
+ cmpl $ROW11_DATA, %eax /* row must be greater than 11 pattern */
+ jb bad_ram
- cmpl $ROW14_DATA, %eax /* and row must be less than 14 pattern */
- ja bad_ram
+ cmpl $ROW14_DATA, %eax /* and row must be less than 14 pattern */
+ ja bad_ram
- cmpb %ah,%al /* verify all 4 bytes of dword same */
- jnz bad_ram
- movl %eax,%ebx
- shrl $16,%ebx
- cmpw %bx,%ax
- jnz bad_ram
+ cmpb %ah,%al /* verify all 4 bytes of dword same */
+ jnz bad_ram
+ movl %eax,%ebx
+ shrl $16,%ebx
+ cmpw %bx,%ax
+ jnz bad_ram
/*
* read col 11 wrap adr for real column data value
*/
- movl $COL11_ADR, %esi /* set address to max col (11) wrap addr */
+ movl $COL11_ADR, %esi /* set address to max col (11) wrap addr */
movl (%esi), %eax /* read real col number at max col adr */
/*
* validate column data
*/
- cmpl $COL08_DATA, %eax /* col must be greater than 8 pattern */
- jb bad_ram
-
- cmpl $COL11_DATA, %eax /* and row must be less than 11 pattern */
- ja bad_ram
-
- subl $COL08_DATA, %eax /* normalize column data to zero */
- jc bad_ram
- cmpb %ah,%al /* verify all 4 bytes of dword equal */
- jnz bad_ram
- movl %eax,%edx
- shrl $16,%edx
- cmpw %dx,%ax
- jnz bad_ram
+ cmpl $COL08_DATA, %eax /* col must be greater than 8 pattern */
+ jb bad_ram
+
+ cmpl $COL11_DATA, %eax /* and row must be less than 11 pattern */
+ ja bad_ram
+
+ subl $COL08_DATA, %eax /* normalize column data to zero */
+ jc bad_ram
+ cmpb %ah,%al /* verify all 4 bytes of dword equal */
+ jnz bad_ram
+ movl %eax,%edx
+ shrl $16,%edx
+ cmpw %dx,%ax
+ jnz bad_ram
/*
* merge bank and col data together
*/
- addw %di,%dx /* merge of bank and col info in dl */
+ addw %di,%dx /* merge of bank and col info in dl */
/*
* fix ending addr mask based upon col info
*/
- movb $3,%al
- subb %dh,%al /* dh contains the overflow from the bank/col merge */
- movb %bl,%dh /* bl contains the row mask (aa, 07, 0f, 1f or 3f) */
- xchgw %cx,%ax /* cx = ax = 3 or 2 depending on 2 or 4 bank device */
- shrb %cl,%dh /* */
- incb %dh /* ending addr is 1 greater than real end */
- xchgw %cx,%ax /* cx is bank number again */
+ movb $3,%al
+ subb %dh,%al /* dh contains the overflow from the bank/col merge */
+ movb %bl,%dh /* bl contains the row mask (aa, 07, 0f, 1f or 3f) */
+ xchgw %cx,%ax /* cx = ax = 3 or 2 depending on 2 or 4 bank device */
+ shrb %cl,%dh /* */
+ incb %dh /* ending addr is 1 greater than real end */
+ xchgw %cx,%ax /* cx is bank number again */
/*
* issue all banks precharge
*/
-bad_reint:
- movl $DRCCTL, %esi /* setup DRAM control register with */
- movb $0x2,%al /* All banks precharge */
+bad_reint:
+ movl $DRCCTL, %esi /* setup DRAM control register with */
+ movb $0x2,%al /* All banks precharge */
movb %al, (%esi)
- movl $CACHELINESZ, %esi /* address to init read buffer */
+ movl $CACHELINESZ, %esi /* address to init read buffer */
movw %ax, (%esi)
/*
* update ENDING ADDRESS REGISTER
*/
- movl $DRCBENDADR, %edi /* DRAM ending address register */
- movl %ecx,%ebx
+ movl $DRCBENDADR, %edi /* DRAM ending address register */
+ movl %ecx,%ebx
addl %ebx, %edi
movb %dh, (%edi)
/*
* update CONFIG REGISTER
*/
- xorb %dh,%dh
- movw $0x00f,%bx
- movw %cx,%ax
- shlw $2,%ax
- xchgw %cx,%ax
- shlw %cl,%dx
- shlw %cl,%bx
- notw %bx
- xchgw %cx,%ax
- movl $DRCCFG, %edi
+ xorb %dh,%dh
+ movw $0x00f,%bx
+ movw %cx,%ax
+ shlw $2,%ax
+ xchgw %cx,%ax
+ shlw %cl,%dx
+ shlw %cl,%bx
+ notw %bx
+ xchgw %cx,%ax
+ movl $DRCCFG, %edi
mov (%edi), %ax
- andw %bx,%ax
- orw %dx,%ax
+ andw %bx,%ax
+ orw %dx,%ax
movw %ax, (%edi)
- jcxz cleanup
+ jcxz cleanup
- decw %cx
- movl %ecx,%ebx
- movl $DRCBENDADR, %edi /* DRAM ending address register */
- movb $0xff,%al
+ decw %cx
+ movl %ecx,%ebx
+ movl $DRCBENDADR, %edi /* DRAM ending address register */
+ movb $0xff,%al
addl %ebx, %edi
movb %al, (%edi)
/*
- * set control register to NORMAL mode
+ * set control register to NORMAL mode
*/
- movl $DRCCTL, %esi /* setup DRAM control register with */
- movb $0x0,%al /* Normal mode value */
+ movl $DRCCTL, %esi /* setup DRAM control register with */
+ movb $0x0,%al /* Normal mode value */
movb %al, (%esi)
- movl $CACHELINESZ, %esi /* address to init read buffer */
+ movl $CACHELINESZ, %esi /* address to init read buffer */
movw %ax, (%esi)
- jmp nextbank
+ jmp nextbank
-cleanup:
- movl $DRCBENDADR, %edi /* DRAM ending address register */
- movw $4,%cx
- xorw %ax,%ax
-cleanuplp:
+cleanup:
+ movl $DRCBENDADR, %edi /* DRAM ending address register */
+ movw $4,%cx
+ xorw %ax,%ax
+cleanuplp:
movb (%edi), %al
- orb %al,%al
- jz emptybank
+ orb %al,%al
+ jz emptybank
- addb %ah,%al
- jns nottoomuch
+ addb %ah,%al
+ jns nottoomuch
- movb $0x7f,%al
-nottoomuch:
- movb %al,%ah
- orb $0x80,%al
+ movb $0x7f,%al
+nottoomuch:
+ movb %al,%ah
+ orb $0x80,%al
movb %al, (%edi)
-emptybank:
- incl %edi
- loop cleanuplp
+emptybank:
+ incl %edi
+ loop cleanuplp
#if defined(CFG_SDRAM_CAS_LATENCY_2T) || defined(CFG_SDRAM_CAS_LATENCY_3T)
/* set the CAS latency now since it is hard to do
* when we run from the RAM */
movl $DRCTMCTL, %edi /* DRAM timing register */
- movb (%edi), %al
+ movb (%edi), %al
#ifdef CFG_SDRAM_CAS_LATENCY_2T
andb $0xef, %al
#endif
#ifdef CFG_SDRAM_CAS_LATENCY_3T
orb $0x10, %al
-#endif
+#endif
movb %al, (%edi)
#endif
- movl $DRCCTL, %edi /* DRAM Control register */
- movb $0x3,%al /* Load mode register cmd */
+ movl $DRCCTL, %edi /* DRAM Control register */
+ movb $0x3,%al /* Load mode register cmd */
movb %al, (%edi)
movw %ax, (%esi)
- movl $DRCCTL, %edi /* DRAM Control register */
- movb $0x18,%al /* Enable refresh and NORMAL mode */
+ movl $DRCCTL, %edi /* DRAM Control register */
+ movb $0x18,%al /* Enable refresh and NORMAL mode */
movb %al, (%edi)
- jmp dram_done
+ jmp dram_done
+
+bad_ram:
+ xorl %edx,%edx
+ xorl %edi,%edi
+ jmp bad_reint
-bad_ram:
- xorl %edx,%edx
- xorl %edi,%edi
- jmp bad_reint
+dram_done:
-dram_done:
-
/* readback DRCBENDADR and return the number
- * of available ram bytes in %eax */
+ * of available ram bytes in %eax */
+
+ movl $DRCBENDADR, %edi /* DRAM ending address register */
- movl $DRCBENDADR, %edi /* DRAM ending address register */
-
movl (%edi), %eax
movl %eax, %ecx
andl $0x80000000, %ecx
jz bank2
andl $0x7f000000, %eax
- shrl $2, %eax
+ shrl $2, %eax
movl %eax, %ebx
bank2: movl (%edi), %eax
@@ -509,7 +509,7 @@ bank2: movl (%edi), %eax
andl $0x00800000, %ecx
jz bank1
andl $0x007f0000, %eax
- shll $6, %eax
+ shll $6, %eax
movl %eax, %ebx
bank1: movl (%edi), %eax
@@ -517,7 +517,7 @@ bank1: movl (%edi), %eax
andl $0x00008000, %ecx
jz bank0
andl $0x00007f00, %eax
- shll $14, %eax
+ shll $14, %eax
movl %eax, %ebx
bank0: movl (%edi), %eax
@@ -525,7 +525,7 @@ bank0: movl (%edi), %eax
andl $0x00000080, %ecx
jz done
andl $0x0000007f, %eax
- shll $22, %eax
+ shll $22, %eax
movl %eax, %ebx
done: movl %ebx, %eax
diff --git a/cpu/i386/serial.c b/cpu/i386/serial.c
index 22c3c2aac3..f58b47c70e 100644
--- a/cpu/i386/serial.c
+++ b/cpu/i386/serial.c
@@ -1,7 +1,7 @@
/*
* (C) Copyright 2002
* Daniel Engström, Omicron Ceti AB, daniel@omicron.se
- *
+ *
* (C) Copyright 2000
* Wolfgang Denk, DENX Software Engineering, wd@denx.de.
*
@@ -81,7 +81,6 @@
#define asyncLSRRxFifoError1 0x80
-
#if CONFIG_SERIAL_SOFTWARE_FIFO
/*-----------------------------------------------------------------------------+
| Fifo
@@ -100,7 +99,7 @@ static int serial_buffer_active=0;
static int serial_div(int baudrate)
{
-
+
switch (baudrate) {
case 1200:
return 96;
@@ -113,9 +112,9 @@ static int serial_div(int baudrate)
case 57600:
return 2;
case 115200:
- return 1;
+ return 1;
}
-
+
return 12;
}
@@ -132,7 +131,7 @@ int serial_init(void)
volatile char val;
int bdiv = serial_div(gd->baudrate);
-
+
outb(0x80, UART0_BASE + UART_LCR); /* set DLAB bit */
outb(bdiv, UART0_BASE + UART_DLL); /* set baudrate divisor */
@@ -154,7 +153,7 @@ void serial_setbrg(void)
DECLARE_GLOBAL_DATA_PTR;
unsigned short bdiv;
-
+
bdiv = serial_div(gd->baudrate);
outb(0x80, UART0_BASE + UART_LCR); /* set DLAB bit */
@@ -199,7 +198,7 @@ int serial_getc(void)
return serial_buffered_getc();
}
#endif
-
+
while (1) {
#if defined(CONFIG_HW_WATCHDOG)
WATCHDOG_RESET(); /* Reset HW Watchdog, if needed */
@@ -262,28 +261,28 @@ void serial_isr(void *arg)
} else {
space = buf_info.rx_get - rx_put;
}
-
+
while (inb(UART0_BASE + UART_LSR) & 1) {
c = inb(UART0_BASE);
if (space) {
buf_info.rx_buffer[rx_put++] = c;
space--;
-
+
if (rx_put == buf_info.rx_get) {
buf_info.rx_get++;
if (rx_put == CONFIG_SERIAL_SOFTWARE_FIFO) {
buf_info.rx_get = 0;
}
}
-
+
if (rx_put == CONFIG_SERIAL_SOFTWARE_FIFO) {
rx_put = 0;
if (0 == buf_info.rx_get) {
buf_info.rx_get = 1;
}
-
+
}
-
+
}
if (space < CONFIG_SERIAL_SOFTWARE_FIFO / 4) {
/* Stop flow by setting RTS inactive */
@@ -309,20 +308,20 @@ void serial_buffered_init(void)
buf_info.cts = 0;
}
- irq_install_handler ( VECNUM_U0 /*UART0 *//*int vec */ ,
+ irq_install_handler ( VECNUM_U0 /*UART0 */ /*int vec */ ,
serial_isr /*interrupt_handler_t *handler */ ,
(void *) &buf_info /*void *arg */ );
/* Enable "RX Data Available" Interrupt on UART */
/* outb(inb(UART0_BASE + UART_IER) |0x01, UART0_BASE + UART_IER); */
outb(0x01, UART0_BASE + UART_IER);
-
+
/* Set DTR and RTS active, enable interrupts */
outb(inb (UART0_BASE + UART_MCR) | 0x0b, UART0_BASE + UART_MCR);
-
+
/* Setup UART FIFO: RX trigger level: 1 byte, Enable FIFO */
outb( /*(1 << 6) |*/ 1, UART0_BASE + UART_FCR);
-
+
serial_buffer_active = 1;
}
@@ -348,7 +347,7 @@ void serial_buffered_putc (const char c)
buf_info.cts = 1;
}
}
-
+
#endif
serial_putc (c);
}
@@ -508,4 +507,3 @@ void kgdb_interruptible(int yes)
}
#endif /* (CONFIG_KGDB_SER_INDEX & 2) */
#endif /* CFG_CMD_KGDB */
-
diff --git a/cpu/i386/start.S b/cpu/i386/start.S
index 025555c0a1..afcbb24520 100644
--- a/cpu/i386/start.S
+++ b/cpu/i386/start.S
@@ -1,5 +1,5 @@
/*
- * U-boot - i386 Startup Code
+ * U-boot - i386 Startup Code
*
* Copyright (c) 2002 Omicron Ceti AB, Daniel Engström <denaiel@omicron.se>
*
@@ -26,71 +26,71 @@
#include <config.h>
#include <version.h>
-
+
.section .text
.code32
.globl _start
-.type _start, @function
+.type _start, @function
.globl _i386boot_start
_i386boot_start:
-_start:
- movl $0x18,%eax /* Load our segement registes, the
- * gdt have already been loaded by start16.S */
- movw %ax,%fs
+_start:
+ movl $0x18,%eax /* Load our segement registes, the
+ * gdt have already been loaded by start16.S */
+ movw %ax,%fs
movw %ax,%ds
- movw %ax,%gs
- movw %ax,%es
- movw %ax,%ss
-
+ movw %ax,%gs
+ movw %ax,%es
+ movw %ax,%ss
+
/* We call a few functions in the board support package
* since we have no stack yet we'll have to use %ebp
* to store the return address */
-
+
/* Early platform init (setup gpio, etc ) */
mov $early_board_init_ret, %ebp
jmp early_board_init
early_board_init_ret:
-
+
/* The __port80 entry-point should be usabe by now */
/* so we try to indicate progress */
- movw $0x01, %ax
+ movw $0x01, %ax
movl $.progress0, %ebp
jmp __show_boot_progress
-.progress0:
+.progress0:
/* size memory */
mov $mem_init_ret, %ebp
- jmp mem_init
+ jmp mem_init
mem_init_ret:
-
- /* check ammount of configured memory
- * (we need atleast bss start+bss size+stack size) */
+
+ /* check ammount of configured memory
+ * (we need atleast bss start+bss size+stack size) */
movl $_i386boot_bss_start, %ecx /* BSS start */
- addl $_i386boot_bss_size, %ecx /* BSS size */
+ addl $_i386boot_bss_size, %ecx /* BSS size */
addl $CFG_STACK_SIZE, %ecx
- cmpl %ecx, %eax
+ cmpl %ecx, %eax
jae mem_ok
-
+
/* indicate (lack of) progress */
- movw $0x81, %ax
+ movw $0x81, %ax
movl $.progress0a, %ebp
jmp __show_boot_progress
-.progress0a:
+.progress0a:
jmp die
-mem_ok:
+mem_ok:
/* indicate progress */
- movw $0x02, %ax
+ movw $0x02, %ax
movl $.progress1, %ebp
jmp __show_boot_progress
-.progress1:
+.progress1:
/* create a stack after the bss */
- movl $_i386boot_bss_start, %eax
+ movl $_i386boot_bss_start, %eax
addl $_i386boot_bss_size, %eax
addl $CFG_STACK_SIZE, %eax
- movl %eax, %esp
-
+ movl %eax, %esp
+
pushl $0
popl %eax
cmpl $0, %eax
@@ -102,83 +102,83 @@ mem_ok:
no_stack:
/* indicate (lack of) progress */
- movw $0x82, %ax
+ movw $0x82, %ax
movl $.progress1a, %ebp
jmp __show_boot_progress
-.progress1a:
+.progress1a:
jmp die
-
-
-stack_ok:
+
+
+stack_ok:
/* indicate progress */
- movw $0x03, %ax
+ movw $0x03, %ax
movl $.progress2, %ebp
jmp __show_boot_progress
-.progress2:
+.progress2:
/* copy data section to ram, size must be 4-byte aligned */
movl $_i386boot_romdata_dest, %edi /* destination address */
- movl $_i386boot_romdata_start, %esi /* source address */
+ movl $_i386boot_romdata_start, %esi /* source address */
movl $_i386boot_romdata_size, %ecx /* number of bytes to copy */
movl %ecx, %eax
andl $3, %eax
jnz data_fail
-
+
shrl $2, %ecx /* copy 4 byte each time */
- cld
+ cld
cmpl $0, %ecx
- je data_ok
-data_segment:
- movsl
+ je data_ok
+data_segment:
+ movsl
loop data_segment
jmp data_ok
data_fail:
/* indicate (lack of) progress */
- movw $0x83, %ax
+ movw $0x83, %ax
movl $.progress2a, %ebp
jmp __show_boot_progress
-.progress2a:
+.progress2a:
jmp die
-data_ok:
+data_ok:
/* indicate progress */
- movw $0x04, %ax
+ movw $0x04, %ax
movl $.progress3, %ebp
jmp __show_boot_progress
-.progress3:
+.progress3:
/* clear bss section in ram, size must be 4-byte aligned */
movl $_i386boot_bss_start, %eax /* BSS start */
- movl $_i386boot_bss_size, %ecx /* BSS size */
+ movl $_i386boot_bss_size, %ecx /* BSS size */
movl %ecx, %eax
andl $3, %eax
jnz bss_fail
shrl $2, %ecx /* clear 4 byte each time */
- cld
+ cld
cmpl $0, %ecx
- je bss_ok
-bss:
+ je bss_ok
+bss:
movl $0, (%edi)
- add $4, %edi
+ add $4, %edi
loop bss
jmp bss_ok
bss_fail:
/* indicate (lack of) progress */
- movw $0x84, %ax
+ movw $0x84, %ax
movl $.progress3a, %ebp
jmp __show_boot_progress
-.progress3a:
+.progress3a:
jmp die
-bss_ok:
+bss_ok:
- wbinvd
+ wbinvd
/* indicate progress */
- movw $0x05, %ax
+ movw $0x05, %ax
movl $.progress4, %ebp
jmp __show_boot_progress
.progress4:
@@ -186,13 +186,11 @@ bss_ok:
call start_i386boot /* Enter, U-boot! */
/* indicate (lack of) progress */
- movw $0x85, %ax
+ movw $0x85, %ax
movl $.progress4a, %ebp
jmp __show_boot_progress
.progress4a:
die: hlt
jmp die
- hlt
-
-
+ hlt
diff --git a/cpu/i386/start16.S b/cpu/i386/start16.S
index a34642f0ae..239f2ff39b 100644
--- a/cpu/i386/start16.S
+++ b/cpu/i386/start16.S
@@ -1,5 +1,5 @@
/*
- * U-boot - i386 Startup Code
+ * U-boot - i386 Startup Code
*
* Copyright (c) 2002, 2003 Omicron Ceti AB, Daniel Engström <denaiel@omicron.se>
*
@@ -30,37 +30,37 @@
.section .start16, "ax"
.code16
.globl start16
-start16:
+start16:
/* First we let the BSP do some early initialization
* this code have to map the flash to its final position
*/
mov $board_init16_ret, %bp
jmp board_init16
-board_init16_ret:
-
+board_init16_ret:
+
/* Turn of cache (this might require a 486-class CPU) */
- movl %cr0, %eax
- orl $0x60000000,%eax
- movl %eax, %cr0
- wbinvd
-
+ movl %cr0, %eax
+ orl $0x60000000,%eax
+ movl %eax, %cr0
+ wbinvd
+
/* load the descriptor tables */
o32 cs lidt idt_ptr
-o32 cs lgdt gdt_ptr
+o32 cs lgdt gdt_ptr
/* Now, we enter protected mode */
- movl %cr0, %eax
- orl $1,%eax
- movl %eax, %cr0
-
+ movl %cr0, %eax
+ orl $1,%eax
+ movl %eax, %cr0
+
/* Flush the prefetch queue */
- jmp ff
+ jmp ff
ff:
/* Finally jump to the 32bit initialization code */
- movw $code32start, %ax
- movw %ax,%bp
+ movw $code32start, %ax
+ movw %ax,%bp
o32 cs ljmp *(%bp)
/* 48-bit far pointer */
@@ -71,17 +71,17 @@ code32start:
idt_ptr:
.word 0 /* limit */
.long 0 /* base */
-
+
gdt_ptr:
.word 0x30 /* limit (48 bytes = 6 GDT entries) */
.long BOOT_SEG + gdt /* base */
- /* The GDT table ...
+ /* The GDT table ...
*
- * Selector Type
+ * Selector Type
* 0x00 NULL
* 0x08 Unused
- * 0x10 32bit code
+ * 0x10 32bit code
* 0x18 32bit data/stack
* 0x20 16bit code
* 0x28 16bit data/stack
@@ -100,12 +100,12 @@ gdt:
.word 0x0 /* base address = 0 */
.word 0x9300 /* data read/write */
.word 0x00CF /* granularity = 4096, 386 (+5th nibble of limit) */
-
+
.word 0xFFFF /* 64kb */
.word 0 /* base address = 0 */
.word 0x9b00 /* data read/write */
.word 0x0010 /* granularity = 1 (+5th nibble of limit) */
-
+
.word 0xFFFF /* 64kb */
.word 0 /* base address = 0 */
.word 0x9300 /* data read/write */
diff --git a/cpu/i386/timer.c b/cpu/i386/timer.c
index a23cd6e48b..486d927a5a 100644
--- a/cpu/i386/timer.c
+++ b/cpu/i386/timer.c
@@ -46,28 +46,28 @@ unsigned long get_system_ticks(void)
int timer_init(void)
{
system_ticks = 0;
-
+
irq_install_handler(0, timer_isr, NULL);
-
- /* initialize timer 0 and 2
- *
+
+ /* initialize timer 0 and 2
+ *
* Timer 0 is used to increment system_tick 1000 times/sec
* Timer 1 was used for DRAM refresh in early PC's
* Timer 2 is used to drive the speaker
* (to stasrt a beep: write 3 to port 0x61,
* to stop it again: write 0)
*/
-
- outb(PIT_CMD_CTR0|PIT_CMD_BOTH|PIT_CMD_MODE2, PIT_BASE + PIT_COMMAND);
+
+ outb(PIT_CMD_CTR0|PIT_CMD_BOTH|PIT_CMD_MODE2, PIT_BASE + PIT_COMMAND);
outb(TIMER0_VALUE&0xff, PIT_BASE + PIT_T0);
outb(TIMER0_VALUE>>8, PIT_BASE + PIT_T0);
- outb(PIT_CMD_CTR2|PIT_CMD_BOTH|PIT_CMD_MODE3, PIT_BASE + PIT_COMMAND);
+ outb(PIT_CMD_CTR2|PIT_CMD_BOTH|PIT_CMD_MODE3, PIT_BASE + PIT_COMMAND);
outb(TIMER2_VALUE&0xff, PIT_BASE + PIT_T2);
outb(TIMER2_VALUE>>8, PIT_BASE + PIT_T2);
timer_init_done = 1;
-
+
return 0;
}
@@ -87,7 +87,7 @@ ulong get_timer (ulong base)
return (system_ticks - base);
}
-void set_timer (ulong t)
+void set_timer (ulong t)
{
system_ticks = t;
}
@@ -102,20 +102,20 @@ static u16 read_pit(void)
/* this is not very exact */
void udelay (unsigned long usec)
-{
+{
int counter;
int wraps;
-
+
if (!timer_init_done) {
return;
}
counter = read_pit();
wraps = usec/1000;
usec = usec%1000;
-
+
usec*=1194;
usec/=1000;
- usec+=counter;
+ usec+=counter;
if (usec > 1194) {
usec-=1194;
wraps++;
@@ -123,26 +123,26 @@ void udelay (unsigned long usec)
while (1) {
int new_count = read_pit();
-
+
if (((new_count < usec) && !wraps) || wraps < 0) {
break;
}
-
+
if (new_count > counter) {
wraps--;
}
counter = new_count;
}
-
+
}
#if 0
/* this is a version with debug output */
void _udelay (unsigned long usec)
-{
+{
int counter;
int wraps;
-
+
int usec1, usec2, usec3;
int wraps1, wraps2, wraps3, wraps4;
int ctr1, ctr2, ctr3, nct1, nct2;
@@ -155,13 +155,13 @@ void _udelay (unsigned long usec)
ctr1 = counter;
wraps = usec/1000;
usec = usec%1000;
-
+
usec2 = usec;
wraps1 = wraps;
-
+
usec*=1194;
usec/=1000;
- usec+=counter;
+ usec+=counter;
if (usec > 1194) {
usec-=1194;
wraps++;
@@ -169,7 +169,7 @@ void _udelay (unsigned long usec)
usec3 = usec;
wraps2 = wraps;
-
+
ctr2 = wraps3 = nct1 = 4711;
ctr3 = wraps4 = nct2 = 4711;
i=0;
@@ -179,7 +179,7 @@ void _udelay (unsigned long usec)
if ((new_count < usec && !wraps) || wraps < 0) {
break;
}
-
+
if (new_count > counter) {
wraps--;
}
@@ -192,10 +192,10 @@ void _udelay (unsigned long usec)
wraps4 = wraps;
nct2 = new_count;
}
-
+
counter = new_count;
}
-
+
printf("udelay(%d)\n", usec1);
printf("counter %d\n", ctr1);
printf("1: wraps %d, usec %d\n", wraps1, usec2);
generated by cgit (git 2.34.1) at 2024-12-27 06:05:37 +0000