summaryrefslogtreecommitdiff
path: root/cpu/mpc8260
diff options
context:
space:
mode:
Diffstat (limited to 'cpu/mpc8260')
-rw-r--r--cpu/mpc8260/bedbug_603e.c10
-rw-r--r--cpu/mpc8260/cpu.c2
-rw-r--r--cpu/mpc8260/cpu_init.c14
-rw-r--r--cpu/mpc8260/ether_scc.c142
-rw-r--r--cpu/mpc8260/i2c.c10
-rw-r--r--cpu/mpc8260/pci.c162
-rw-r--r--cpu/mpc8260/serial_scc.c24
-rw-r--r--cpu/mpc8260/serial_smc.c14
-rw-r--r--cpu/mpc8260/spi.c12
-rw-r--r--cpu/mpc8260/start.S6
10 files changed, 196 insertions, 200 deletions
diff --git a/cpu/mpc8260/bedbug_603e.c b/cpu/mpc8260/bedbug_603e.c
index 1ca057f732..9c29b351d7 100644
--- a/cpu/mpc8260/bedbug_603e.c
+++ b/cpu/mpc8260/bedbug_603e.c
@@ -5,8 +5,7 @@
#include <common.h>
#include <command.h>
#include <linux/ctype.h>
-
-#include <cmd_bedbug.h>
+#include <bedbug/type.h>
#include <bedbug/bedbug.h>
#include <bedbug/regs.h>
#include <bedbug/ppc.h>
@@ -64,7 +63,7 @@ void bedbug603e_init( void )
* ====================================================================== */
void bedbug603e_do_break (cmd_tbl_t *cmdtp, int flag, int argc,
- char *argv[])
+ char *argv[])
{
long addr; /* Address to break at */
int which_bp; /* Breakpoint number */
@@ -116,8 +115,8 @@ void bedbug603e_do_break (cmd_tbl_t *cmdtp, int flag, int argc,
/* Set a breakpoint at the address */
if(!(( isdigit( argv[ 1 ][ 0 ] )) ||
- (( argv[ 1 ][ 0 ] >= 'a' ) && ( argv[ 1 ][ 0 ] <= 'f' )) ||
- (( argv[ 1 ][ 0 ] >= 'A' ) && ( argv[ 1 ][ 0 ] <= 'F' ))))
+ (( argv[ 1 ][ 0 ] >= 'a' ) && ( argv[ 1 ][ 0 ] <= 'f' )) ||
+ (( argv[ 1 ][ 0 ] >= 'A' ) && ( argv[ 1 ][ 0 ] <= 'F' ))))
{
printf ("Usage:\n%s\n", cmdtp->usage);
return;
@@ -236,4 +235,3 @@ int bedbug603e_clear( int which_bp )
/* ====================================================================== */
#endif
-
diff --git a/cpu/mpc8260/cpu.c b/cpu/mpc8260/cpu.c
index b8ba48cd04..7662fc652a 100644
--- a/cpu/mpc8260/cpu.c
+++ b/cpu/mpc8260/cpu.c
@@ -180,7 +180,7 @@ void upmconfig (uint upm, uint * table, uint size)
/* ------------------------------------------------------------------------- */
int
-do_reset (cmd_tbl_t * cmdtp, bd_t * bd, int flag, int argc, char *argv[])
+do_reset (cmd_tbl_t * cmdtp, int flag, int argc, char *argv[])
{
ulong msr, addr;
diff --git a/cpu/mpc8260/cpu_init.c b/cpu/mpc8260/cpu_init.c
index d0545cfcf2..fd09a8d48f 100644
--- a/cpu/mpc8260/cpu_init.c
+++ b/cpu/mpc8260/cpu_init.c
@@ -70,13 +70,13 @@ static void config_8260_ioports (volatile immap_t * immr)
uint tpmsk = ~pmsk;
/*
- * the (somewhat confused) paragraph at the
- * bottom of page 35-5 warns that there might
- * be "unknown behaviour" when programming
- * PSORx and PDIRx, if PPARx = 1, so I
- * decided this meant I had to disable the
- * dedicated function first, and enable it
- * last.
+ * the (somewhat confused) paragraph at the
+ * bottom of page 35-5 warns that there might
+ * be "unknown behaviour" when programming
+ * PSORx and PDIRx, if PPARx = 1, so I
+ * decided this meant I had to disable the
+ * dedicated function first, and enable it
+ * last.
*/
iop->ppar &= tpmsk;
iop->psor = (iop->psor & tpmsk) | psor;
diff --git a/cpu/mpc8260/ether_scc.c b/cpu/mpc8260/ether_scc.c
index 8b6af3109d..10133fa482 100644
--- a/cpu/mpc8260/ether_scc.c
+++ b/cpu/mpc8260/ether_scc.c
@@ -43,31 +43,31 @@
# define CPM_CR_ENET_PAGE CPM_CR_SCC1_PAGE
# define CPM_CR_ENET_SBLOCK CPM_CR_SCC1_SBLOCK
# define CMXSCR_MASK (CMXSCR_SC1 |\
- CMXSCR_RS1CS_MSK |\
- CMXSCR_TS1CS_MSK)
+ CMXSCR_RS1CS_MSK |\
+ CMXSCR_TS1CS_MSK)
#elif (CONFIG_ETHER_INDEX == 2)
# define PROFF_ENET PROFF_SCC2
# define CPM_CR_ENET_PAGE CPM_CR_SCC2_PAGE
# define CPM_CR_ENET_SBLOCK CPM_CR_SCC2_SBLOCK
# define CMXSCR_MASK (CMXSCR_SC2 |\
- CMXSCR_RS2CS_MSK |\
- CMXSCR_TS2CS_MSK)
+ CMXSCR_RS2CS_MSK |\
+ CMXSCR_TS2CS_MSK)
#elif (CONFIG_ETHER_INDEX == 3)
# define PROFF_ENET PROFF_SCC3
# define CPM_CR_ENET_PAGE CPM_CR_SCC3_PAGE
# define CPM_CR_ENET_SBLOCK CPM_CR_SCC3_SBLOCK
# define CMXSCR_MASK (CMXSCR_SC3 |\
- CMXSCR_RS3CS_MSK |\
- CMXSCR_TS3CS_MSK)
+ CMXSCR_RS3CS_MSK |\
+ CMXSCR_TS3CS_MSK)
#elif (CONFIG_ETHER_INDEX == 4)
# define PROFF_ENET PROFF_SCC4
# define CPM_CR_ENET_PAGE CPM_CR_SCC4_PAGE
# define CPM_CR_ENET_SBLOCK CPM_CR_SCC4_SBLOCK
# define CMXSCR_MASK (CMXSCR_SC4 |\
- CMXSCR_RS4CS_MSK |\
- CMXSCR_TS4CS_MSK)
+ CMXSCR_RS4CS_MSK |\
+ CMXSCR_TS4CS_MSK)
#endif
@@ -104,27 +104,27 @@ int eth_send(volatile void *packet, int length)
int result = 0;
if (length <= 0) {
- printf("scc: bad packet size: %d\n", length);
- goto out;
+ printf("scc: bad packet size: %d\n", length);
+ goto out;
}
for(i=0; rtx->txbd[txIdx].cbd_sc & BD_ENET_TX_READY; i++) {
- if (i >= TOUT_LOOP) {
- printf("scc: tx buffer not ready\n");
- goto out;
- }
+ if (i >= TOUT_LOOP) {
+ printf("scc: tx buffer not ready\n");
+ goto out;
+ }
}
rtx->txbd[txIdx].cbd_bufaddr = (uint)packet;
rtx->txbd[txIdx].cbd_datlen = length;
rtx->txbd[txIdx].cbd_sc |= (BD_ENET_TX_READY | BD_ENET_TX_LAST |
- BD_ENET_TX_WRAP);
+ BD_ENET_TX_WRAP);
for(i=0; rtx->txbd[txIdx].cbd_sc & BD_ENET_TX_READY; i++) {
- if (i >= TOUT_LOOP) {
- printf("scc: tx error\n");
- goto out;
- }
+ if (i >= TOUT_LOOP) {
+ printf("scc: tx error\n");
+ goto out;
+ }
}
/* return only status bits */
@@ -141,37 +141,37 @@ int eth_rx(void)
for (;;)
{
- if (rtx->rxbd[rxIdx].cbd_sc & BD_ENET_RX_EMPTY) {
- length = -1;
- break; /* nothing received - leave for() loop */
- }
-
- length = rtx->rxbd[rxIdx].cbd_datlen;
-
- if (rtx->rxbd[rxIdx].cbd_sc & 0x003f)
- {
- printf("err: %x\n", rtx->rxbd[rxIdx].cbd_sc);
- }
- else
- {
- /* Pass the packet up to the protocol layers. */
- NetReceive(NetRxPackets[rxIdx], length - 4);
- }
-
-
- /* Give the buffer back to the SCC. */
- rtx->rxbd[rxIdx].cbd_datlen = 0;
-
- /* wrap around buffer index when necessary */
- if ((rxIdx + 1) >= PKTBUFSRX) {
- rtx->rxbd[PKTBUFSRX - 1].cbd_sc = (BD_ENET_RX_WRAP |
- BD_ENET_RX_EMPTY);
- rxIdx = 0;
- }
- else {
- rtx->rxbd[rxIdx].cbd_sc = BD_ENET_RX_EMPTY;
- rxIdx++;
- }
+ if (rtx->rxbd[rxIdx].cbd_sc & BD_ENET_RX_EMPTY) {
+ length = -1;
+ break; /* nothing received - leave for() loop */
+ }
+
+ length = rtx->rxbd[rxIdx].cbd_datlen;
+
+ if (rtx->rxbd[rxIdx].cbd_sc & 0x003f)
+ {
+ printf("err: %x\n", rtx->rxbd[rxIdx].cbd_sc);
+ }
+ else
+ {
+ /* Pass the packet up to the protocol layers. */
+ NetReceive(NetRxPackets[rxIdx], length - 4);
+ }
+
+
+ /* Give the buffer back to the SCC. */
+ rtx->rxbd[rxIdx].cbd_datlen = 0;
+
+ /* wrap around buffer index when necessary */
+ if ((rxIdx + 1) >= PKTBUFSRX) {
+ rtx->rxbd[PKTBUFSRX - 1].cbd_sc = (BD_ENET_RX_WRAP |
+ BD_ENET_RX_EMPTY);
+ rxIdx = 0;
+ }
+ else {
+ rtx->rxbd[rxIdx].cbd_sc = BD_ENET_RX_EMPTY;
+ rxIdx++;
+ }
}
return length;
}
@@ -201,7 +201,7 @@ int eth_init(bd_t *bis)
/* 24.21 - (4,5): connect SCC's tx and rx clocks, use NMSI for SCC */
immr->im_cpmux.cmx_uar = 0;
immr->im_cpmux.cmx_scr = ( (immr->im_cpmux.cmx_scr & ~CMXSCR_MASK) |
- CFG_CMXSCR_VALUE);
+ CFG_CMXSCR_VALUE);
/* 24.21 (6) write RBASE and TBASE to parameter RAM */
@@ -221,9 +221,9 @@ int eth_init(bd_t *bis)
/* 24.21 - (7): Write INIT RX AND TX PARAMETERS to CPCR */
while(immr->im_cpm.cp_cpcr & CPM_CR_FLG);
immr->im_cpm.cp_cpcr = mk_cr_cmd(CPM_CR_ENET_PAGE,
- CPM_CR_ENET_SBLOCK,
- 0x0c,
- CPM_CR_INIT_TRX) | CPM_CR_FLG;
+ CPM_CR_ENET_SBLOCK,
+ 0x0c,
+ CPM_CR_INIT_TRX) | CPM_CR_FLG;
/* 24.21 - (8-18): Set up parameter RAM */
pram_ptr->sen_crcec = 0x0; /* Error Counter CRC (unused) */
@@ -266,9 +266,9 @@ int eth_init(bd_t *bis)
/* 24.21 - (19): Initialize RxBD */
for (i = 0; i < PKTBUFSRX; i++)
{
- rtx->rxbd[i].cbd_sc = BD_ENET_RX_EMPTY;
- rtx->rxbd[i].cbd_datlen = 0; /* Reset */
- rtx->rxbd[i].cbd_bufaddr = (uint)NetRxPackets[i];
+ rtx->rxbd[i].cbd_sc = BD_ENET_RX_EMPTY;
+ rtx->rxbd[i].cbd_datlen = 0; /* Reset */
+ rtx->rxbd[i].cbd_bufaddr = (uint)NetRxPackets[i];
}
rtx->rxbd[PKTBUFSRX - 1].cbd_sc |= BD_ENET_RX_WRAP;
@@ -276,11 +276,11 @@ int eth_init(bd_t *bis)
/* 24.21 - (20): Initialize TxBD */
for (i = 0; i < TX_BUF_CNT; i++)
{
- rtx->txbd[i].cbd_sc = (BD_ENET_TX_PAD |
- BD_ENET_TX_LAST |
- BD_ENET_TX_TC);
- rtx->txbd[i].cbd_datlen = 0; /* Reset */
- rtx->txbd[i].cbd_bufaddr = (uint)&txbuf[i][0];
+ rtx->txbd[i].cbd_sc = (BD_ENET_TX_PAD |
+ BD_ENET_TX_LAST |
+ BD_ENET_TX_TC);
+ rtx->txbd[i].cbd_datlen = 0; /* Reset */
+ rtx->txbd[i].cbd_bufaddr = (uint)&txbuf[i][0];
}
rtx->txbd[TX_BUF_CNT - 1].cbd_sc |= BD_ENET_TX_WRAP;
@@ -290,8 +290,8 @@ int eth_init(bd_t *bis)
/* 24.21 - (22): Write to SCCM to enable TXE, RXF, TXB events */
immr->im_scc[CONFIG_ETHER_INDEX-1].scc_sccm = (SCCE_ENET_TXE |
- SCCE_ENET_RXF |
- SCCE_ENET_TXB);
+ SCCE_ENET_RXF |
+ SCCE_ENET_TXB);
/* 24.21 - (23): we don't use ethernet interrupts */
@@ -300,9 +300,9 @@ int eth_init(bd_t *bis)
/* 24.21 - (25): Clear GSMR_L to enable normal operations */
immr->im_scc[CONFIG_ETHER_INDEX-1].scc_gsmrl = (SCC_GSMRL_TCI |
- SCC_GSMRL_TPL_48 |
- SCC_GSMRL_TPP_10 |
- SCC_GSMRL_MODE_ENET);
+ SCC_GSMRL_TPL_48 |
+ SCC_GSMRL_TPP_10 |
+ SCC_GSMRL_MODE_ENET);
/* 24.21 - (26): Initialize DSR */
immr->im_scc[CONFIG_ETHER_INDEX-1].scc_dsr = 0xd555;
@@ -331,18 +331,17 @@ int eth_init(bd_t *bis)
/* 24.21 - (28): Write to GSMR_L to enable SCC */
immr->im_scc[CONFIG_ETHER_INDEX-1].scc_gsmrl |= (SCC_GSMRL_ENR |
- SCC_GSMRL_ENT);
+ SCC_GSMRL_ENT);
return 0;
}
-
void eth_halt(void)
{
volatile immap_t *immr = (immap_t *)CFG_IMMR;
immr->im_scc[CONFIG_ETHER_INDEX-1].scc_gsmrl &= ~(SCC_GSMRL_ENR |
- SCC_GSMRL_ENT);
+ SCC_GSMRL_ENT);
}
#if 0
@@ -350,9 +349,8 @@ void restart(void)
{
volatile immap_t *immr = (immap_t *)CFG_IMMR;
immr->im_cpm.cp_scc[CONFIG_ETHER_INDEX-1].scc_gsmrl |= (SCC_GSMRL_ENR |
- SCC_GSMRL_ENT);
+ SCC_GSMRL_ENT);
}
#endif
#endif /* CONFIG_ETHER_ON_SCC && CFG_CMD_NET */
-
diff --git a/cpu/mpc8260/i2c.c b/cpu/mpc8260/i2c.c
index 69ae535ba2..789c514c91 100644
--- a/cpu/mpc8260/i2c.c
+++ b/cpu/mpc8260/i2c.c
@@ -223,7 +223,7 @@ void i2c_init(int speed, int slaveadd)
volatile I2C_BD *rxbd, *txbd;
uint dpaddr;
-#ifdef CFG_I2C_INIT_BOARD
+#ifdef CFG_I2C_INIT_BOARD
/* call board specific i2c bus reset routine before accessing the */
/* environment, which might be in a chip on that bus. For details */
/* about this problem see doc/I2C_Edge_Conditions. */
@@ -494,7 +494,7 @@ int i2c_doio(i2c_state_t *state)
volatile iic_t *iip;
volatile i2c8260_t *i2c = (i2c8260_t *)&immap->im_i2c;
volatile I2C_BD *txbd, *rxbd;
- int n, i, b, rxcnt = 0, rxtimeo = 0, txcnt = 0, txtimeo = 0, rc = 0;
+ int n, i, b, rxcnt = 0, rxtimeo = 0, txcnt = 0, txtimeo = 0, rc = 0;
uint dpaddr;
PRINTD(("[I2C] i2c_doio\n"));
@@ -543,7 +543,7 @@ int i2c_doio(i2c_state_t *state)
rxbd = ((I2C_BD*)state->rxbd) - n;
for (i = 0; i < n; i++) {
- rxtimeo += TOUT_LOOP * rxbd->length;
+ rxtimeo += TOUT_LOOP * rxbd->length;
rxbd++;
}
@@ -670,7 +670,7 @@ i2c_read(uchar chip, uint addr, int alen, uchar *buffer, int len)
* and the extra bits end up in the "chip address" bit slots.
* This makes a 24WC08 (1Kbyte) chip look like four 256 byte
* chips.
- *
+ *
* Note that we consider the length of the address field to still
* be one byte because the extra address bits are hidden in the
* chip address.
@@ -719,7 +719,7 @@ i2c_write(uchar chip, uint addr, int alen, uchar *buffer, int len)
* and the extra bits end up in the "chip address" bit slots.
* This makes a 24WC08 (1Kbyte) chip look like four 256 byte
* chips.
- *
+ *
* Note that we consider the length of the address field to still
* be one byte because the extra address bits are hidden in the
* chip address.
diff --git a/cpu/mpc8260/pci.c b/cpu/mpc8260/pci.c
index ac77c16832..b3a89f53fe 100644
--- a/cpu/mpc8260/pci.c
+++ b/cpu/mpc8260/pci.c
@@ -35,7 +35,7 @@
*
* 0x80000000 - 0xBFFFFFFF CPU2PCI space PCIBR0
* 0xF4000000 - 0xF7FFFFFF CPU2PCI space PCIBR1
- *
+ *
* 0x80000000 - 0x9FFFFFFF 0x80000000 - 0x9FFFFFFF (Outbound ATU #1)
* PCI Mem with prefetch
*
@@ -44,7 +44,7 @@
*
* 0xF4000000 - 0xF7FFFFFF 0x00000000 - 0x03FFFFFF (Outbound ATU #3)
* 32-bit PCI IO
- *
+ *
* PCI->Local map (from PCI)
* MPC826x slave window controlled by
*
@@ -52,15 +52,15 @@
* MPC826x local memory
*/
-/*
- * Slave window that allows PCI masters to access MPC826x local memory.
+/*
+ * Slave window that allows PCI masters to access MPC826x local memory.
* This window is set up using the first set of Inbound ATU registers
*/
-#ifndef CFG_PCI_SLV_MEM_LOCAL
-#define PCI_SLV_MEM_LOCAL CFG_SDRAM_BASE /* Local base */
-#else
-#define PCI_SLV_MEM_LOCAL CFG_PCI_SLV_MEM_LOCAL
+#ifndef CFG_PCI_SLV_MEM_LOCAL
+#define PCI_SLV_MEM_LOCAL CFG_SDRAM_BASE /* Local base */
+#else
+#define PCI_SLV_MEM_LOCAL CFG_PCI_SLV_MEM_LOCAL
#endif
#ifndef CFG_PCI_SLV_MEM_BUS
@@ -71,22 +71,22 @@
#ifndef CFG_PICMR0_MASK_ATTRIB
#define PICMR0_MASK_ATTRIB (PICMR_MASK_512MB | PICMR_ENABLE | \
- PICMR_PREFETCH_EN)
+ PICMR_PREFETCH_EN)
#else
#define PICMR0_MASK_ATTRIB CFG_PICMR0_MASK_ATTRIB
#endif
-/*
+/*
* These are the windows that allow the CPU to access PCI address space.
- * All three PCI master windows, which allow the CPU to access PCI
- * prefetch, non prefetch, and IO space (see below), must all fit within
+ * All three PCI master windows, which allow the CPU to access PCI
+ * prefetch, non prefetch, and IO space (see below), must all fit within
* these windows.
*/
/* PCIBR0 */
#ifndef CFG_PCI_MSTR0_LOCAL
-#define PCI_MSTR0_LOCAL 0x80000000 /* Local base */
-#else
+#define PCI_MSTR0_LOCAL 0x80000000 /* Local base */
+#else
#define PCI_MSTR0_LOCAL CFG_PCI_MSTR0_LOCAL
#endif
@@ -98,9 +98,9 @@
/* PCIBR1 */
#ifndef CFG_PCI_MSTR1_LOCAL
-#define PCI_MSTR1_LOCAL 0xF4000000 /* Local base */
-#else
-#define PCI_MSTR1_LOCAL CFG_PCI_MSTR1_LOCAL
+#define PCI_MSTR1_LOCAL 0xF4000000 /* Local base */
+#else
+#define PCI_MSTR1_LOCAL CFG_PCI_MSTR1_LOCAL
#endif
#ifndef CFG_PCIMSK1_MASK
@@ -109,7 +109,7 @@
#define PCIMSK1_MASK CFG_PCIMSK1_MASK
#endif
-/*
+/*
* Master window that allows the CPU to access PCI Memory (prefetch).
* This window will be setup with the first set of Outbound ATU registers
* in the bridge.
@@ -145,34 +145,34 @@
#define POCMR0_MASK_ATTRIB CFG_POCMR0_MASK_ATTRIB
#endif
-/*
+/*
* Master window that allows the CPU to access PCI Memory (non-prefetch).
* This window will be setup with the second set of Outbound ATU registers
* in the bridge.
*/
-#ifndef CFG_PCI_MSTR_MEMIO_LOCAL
-#define PCI_MSTR_MEMIO_LOCAL 0x90000000 /* Local base */
-#else
-#define PCI_MSTR_MEMIO_LOCAL CFG_PCI_MSTR_MEMIO_LOCAL
+#ifndef CFG_PCI_MSTR_MEMIO_LOCAL
+#define PCI_MSTR_MEMIO_LOCAL 0x90000000 /* Local base */
+#else
+#define PCI_MSTR_MEMIO_LOCAL CFG_PCI_MSTR_MEMIO_LOCAL
#endif
-#ifndef CFG_PCI_MSTR_MEMIO_BUS
-#define PCI_MSTR_MEMIO_BUS 0x90000000 /* PCI base */
-#else
-#define PCI_MSTR_MEMIO_BUS CFG_PCI_MSTR_MEMIO_BUS
+#ifndef CFG_PCI_MSTR_MEMIO_BUS
+#define PCI_MSTR_MEMIO_BUS 0x90000000 /* PCI base */
+#else
+#define PCI_MSTR_MEMIO_BUS CFG_PCI_MSTR_MEMIO_BUS
#endif
-#ifndef CFG_CPU_PCI_MEMIO_START
-#define CPU_PCI_MEMIO_START PCI_MSTR_MEMIO_LOCAL
-#else
-#define CPU_PCI_MEMIO_START CFG_CPU_PCI_MEMIO_START
+#ifndef CFG_CPU_PCI_MEMIO_START
+#define CPU_PCI_MEMIO_START PCI_MSTR_MEMIO_LOCAL
+#else
+#define CPU_PCI_MEMIO_START CFG_CPU_PCI_MEMIO_START
#endif
-#ifndef CFG_PCI_MSTR_MEMIO_SIZE
-#define PCI_MSTR_MEMIO_SIZE 0x10000000 /* 256 MB */
-#else
-#define PCI_MSTR_MEMIO_SIZE CFG_PCI_MSTR_MEMIO_SIZE
+#ifndef CFG_PCI_MSTR_MEMIO_SIZE
+#define PCI_MSTR_MEMIO_SIZE 0x10000000 /* 256 MB */
+#else
+#define PCI_MSTR_MEMIO_SIZE CFG_PCI_MSTR_MEMIO_SIZE
#endif
#ifndef CFG_POCMR1_MASK_ATTRIB
@@ -181,34 +181,34 @@
#define POCMR1_MASK_ATTRIB CFG_POCMR1_MASK_ATTRIB
#endif
-/*
+/*
* Master window that allows the CPU to access PCI IO space.
* This window will be setup with the third set of Outbound ATU registers
* in the bridge.
*/
-#ifndef CFG_PCI_MSTR_IO_LOCAL
-#define PCI_MSTR_IO_LOCAL 0xA0000000 /* Local base */
-#else
-#define PCI_MSTR_IO_LOCAL CFG_PCI_MSTR_IO_LOCAL
+#ifndef CFG_PCI_MSTR_IO_LOCAL
+#define PCI_MSTR_IO_LOCAL 0xA0000000 /* Local base */
+#else
+#define PCI_MSTR_IO_LOCAL CFG_PCI_MSTR_IO_LOCAL
#endif
-#ifndef CFG_PCI_MSTR_IO_BUS
-#define PCI_MSTR_IO_BUS 0xA0000000 /* PCI base */
-#else
-#define PCI_MSTR_IO_BUS CFG_PCI_MSTR_IO_BUS
+#ifndef CFG_PCI_MSTR_IO_BUS
+#define PCI_MSTR_IO_BUS 0xA0000000 /* PCI base */
+#else
+#define PCI_MSTR_IO_BUS CFG_PCI_MSTR_IO_BUS
#endif
-#ifndef CFG_CPU_PCI_IO_START
-#define CPU_PCI_IO_START PCI_MSTR_IO_LOCAL
-#else
-#define CPU_PCI_IO_START CFG_CPU_PCI_IO_START
+#ifndef CFG_CPU_PCI_IO_START
+#define CPU_PCI_IO_START PCI_MSTR_IO_LOCAL
+#else
+#define CPU_PCI_IO_START CFG_CPU_PCI_IO_START
#endif
-#ifndef CFG_PCI_MSTR_IO_SIZE
-#define PCI_MSTR_IO_SIZE 0x10000000 /* 256MB */
-#else
-#define PCI_MSTR_IO_SIZE CFG_PCI_MSTR_IO_SIZE
+#ifndef CFG_PCI_MSTR_IO_SIZE
+#define PCI_MSTR_IO_SIZE 0x10000000 /* 256MB */
+#else
+#define PCI_MSTR_IO_SIZE CFG_PCI_MSTR_IO_SIZE
#endif
#ifndef CFG_POCMR2_MASK_ATTRIB
@@ -239,7 +239,7 @@ void pci_mpc8250_init(struct pci_controller *hose)
pci_dev_t host_devno = PCI_BDF(0, 0, 0);
pci_setup_indirect(hose, CFG_IMMR + PCI_CFG_ADDR_REG,
- CFG_IMMR + PCI_CFG_DATA_REG);
+ CFG_IMMR + PCI_CFG_DATA_REG);
/*
* Setting required to enable local bus for PCI (SIUMCR [LBPC]).
@@ -248,23 +248,23 @@ void pci_mpc8250_init(struct pci_controller *hose)
immap->im_siu_conf.sc_siumcr = (immap->im_siu_conf.sc_siumcr & ~SIUMCR_LBPC11)
| SIUMCR_LBPC01;
#else
- /*
- * Setting required to enable IRQ1-IRQ7 (SIUMCR [DPPC]),
+ /*
+ * Setting required to enable IRQ1-IRQ7 (SIUMCR [DPPC]),
* and local bus for PCI (SIUMCR [LBPC]).
*/
- immap->im_siu_conf.sc_siumcr = (immap->im_siu_conf.sc_siumcr &
- ~SIUMCR_LBPC11 &
- ~SIUMCR_CS10PC11 &
+ immap->im_siu_conf.sc_siumcr = (immap->im_siu_conf.sc_siumcr &
+ ~SIUMCR_LBPC11 &
+ ~SIUMCR_CS10PC11 &
~SIUMCR_LBPC11) |
- SIUMCR_LBPC01 |
- SIUMCR_CS10PC01 |
+ SIUMCR_LBPC01 |
+ SIUMCR_CS10PC01 |
SIUMCR_LBPC01;
#endif
/* Make PCI lowest priority */
- /* Each 4 bits is a device bus request and the MS 4bits
+ /* Each 4 bits is a device bus request and the MS 4bits
is highest priority */
- /* Bus 4bit value
+ /* Bus 4bit value
--- ----------
CPM high 0b0000
CPM middle 0b0001
@@ -282,8 +282,8 @@ void pci_mpc8250_init(struct pci_controller *hose)
/* Park bus on core while modifying PCI Bus accesses */
immap->im_siu_conf.sc_ppc_acr = 0x6;
- /*
- * Set up master windows that allow the CPU to access PCI space. These
+ /*
+ * Set up master windows that allow the CPU to access PCI space. These
* windows are set up using the two SIU PCIBR registers.
*/
*(volatile unsigned long*)(immr_addr + M8265_PCIMSK0) = PCIMSK0_MASK;
@@ -294,40 +294,40 @@ void pci_mpc8250_init(struct pci_controller *hose)
*(volatile unsigned long*)(immr_addr + M8265_PCIMSK1) = PCIMSK1_MASK;
*(volatile unsigned long*)(immr_addr + M8265_PCIBR1) =
PCI_MSTR1_LOCAL | PCIBR_ENABLE;
-#endif
+#endif
/* Release PCI RST (by default the PCI RST signal is held low) */
pci_outl (immr_addr | PCI_GCR_REG, PCIGCR_PCI_BUS_EN);
/* give it some time */
{
-#ifdef CONFIG_MPC8266ADS
- /* Give the PCI cards more time to initialize before query
+#ifdef CONFIG_MPC8266ADS
+ /* Give the PCI cards more time to initialize before query
This might be good for other boards also
*/
- int i;
- for (i = 0; i < 1000; ++i)
+ int i;
+ for (i = 0; i < 1000; ++i)
#endif
- udelay(1000);
+ udelay(1000);
}
- /*
- * Set up master window that allows the CPU to access PCI Memory (prefetch)
+ /*
+ * Set up master window that allows the CPU to access PCI Memory (prefetch)
* space. This window is set up using the first set of Outbound ATU registers.
*/
pci_outl (immr_addr | POTAR_REG0, PCI_MSTR_MEM_BUS >> 12); /* PCI base */
pci_outl (immr_addr | POBAR_REG0, PCI_MSTR_MEM_LOCAL >> 12); /* Local base */
pci_outl (immr_addr | POCMR_REG0, POCMR0_MASK_ATTRIB); /* Size & attribute */
- /*
- * Set up master window that allows the CPU to access PCI Memory (non-prefetch)
+ /*
+ * Set up master window that allows the CPU to access PCI Memory (non-prefetch)
* space. This window is set up using the second set of Outbound ATU registers.
*/
pci_outl (immr_addr | POTAR_REG1, PCI_MSTR_MEMIO_BUS >> 12); /* PCI base */
pci_outl (immr_addr | POBAR_REG1, PCI_MSTR_MEMIO_LOCAL >> 12); /* Local base */
pci_outl (immr_addr | POCMR_REG1, POCMR1_MASK_ATTRIB); /* Size & attribute */
-
- /*
+
+ /*
* Set up master window that allows the CPU to access PCI IO space. This window
* is set up using the third set of Outbound ATU registers.
*/
@@ -335,8 +335,8 @@ void pci_mpc8250_init(struct pci_controller *hose)
pci_outl (immr_addr | POBAR_REG2, PCI_MSTR_IO_LOCAL >> 12); /* Local base */
pci_outl (immr_addr | POCMR_REG2, POCMR2_MASK_ATTRIB); /* Size & attribute */
- /*
- * Set up slave window that allows PCI masters to access MPC826x local memory.
+ /*
+ * Set up slave window that allows PCI masters to access MPC826x local memory.
* This window is set up using the first set of Inbound ATU registers
*/
pci_outl (immr_addr | PITAR_REG0, PCI_SLV_MEM_LOCAL >> 12); /* Local base */
@@ -352,18 +352,18 @@ void pci_mpc8250_init(struct pci_controller *hose)
/* Host mode - specify the bridge as a host-PCI bridge */
pci_hose_write_config_byte(hose, host_devno, PCI_CLASS_CODE,
- PCI_CLASS_BRIDGE_CTLR);
+ PCI_CLASS_BRIDGE_CTLR);
/* Enable the host bridge to be a master on the PCI bus, and to act as a PCI memory target */
pci_hose_read_config_word(hose, host_devno, PCI_COMMAND, &tempShort);
pci_hose_write_config_word(hose, host_devno, PCI_COMMAND,
- tempShort | PCI_COMMAND_MASTER | PCI_COMMAND_MEMORY);
+ tempShort | PCI_COMMAND_MASTER | PCI_COMMAND_MEMORY);
#ifdef CONFIG_MPC8266ADS
/* do some bridge init, should be done on all 8260 based bridges */
pci_hose_write_config_byte(hose, host_devno, PCI_CACHE_LINE_SIZE, 0x08);
pci_hose_write_config_byte(hose, host_devno, PCI_LATENCY_TIMER, 0xF8);
-#endif
+#endif
hose->first_busno = 0;
hose->last_busno = 0xff;
diff --git a/cpu/mpc8260/serial_scc.c b/cpu/mpc8260/serial_scc.c
index ca763024fc..32016f2f91 100644
--- a/cpu/mpc8260/serial_scc.c
+++ b/cpu/mpc8260/serial_scc.c
@@ -82,7 +82,7 @@
int serial_init (void)
{
- volatile immap_t *im = (immap_t *)CFG_IMMR;
+ volatile immap_t *im = (immap_t *)CFG_IMMR;
volatile scc_t *sp;
volatile scc_uart_t *up;
volatile cbd_t *tbdf, *rbdf;
@@ -196,12 +196,12 @@ serial_putc(const char c)
{
volatile scc_uart_t *up;
volatile cbd_t *tbdf;
- volatile immap_t *im;
+ volatile immap_t *im;
if (c == '\n')
serial_putc ('\r');
- im = (immap_t *)CFG_IMMR;
+ im = (immap_t *)CFG_IMMR;
up = (scc_uart_t *)&im->im_dprambase[PROFF_SCC];
tbdf = (cbd_t *)&im->im_dprambase[up->scc_genscc.scc_tbase];
@@ -230,10 +230,10 @@ serial_getc(void)
{
volatile cbd_t *rbdf;
volatile scc_uart_t *up;
- volatile immap_t *im;
+ volatile immap_t *im;
unsigned char c;
- im = (immap_t *)CFG_IMMR;
+ im = (immap_t *)CFG_IMMR;
up = (scc_uart_t *)&im->im_dprambase[PROFF_SCC];
rbdf = (cbd_t *)&im->im_dprambase[up->scc_genscc.scc_rbase];
@@ -255,9 +255,9 @@ serial_tstc()
{
volatile cbd_t *rbdf;
volatile scc_uart_t *up;
- volatile immap_t *im;
+ volatile immap_t *im;
- im = (immap_t *)CFG_IMMR;
+ im = (immap_t *)CFG_IMMR;
up = (scc_uart_t *)&im->im_dprambase[PROFF_SCC];
rbdf = (cbd_t *)&im->im_dprambase[up->scc_genscc.scc_rbase];
@@ -321,7 +321,7 @@ serial_tstc()
void
kgdb_serial_init (void)
{
- volatile immap_t *im = (immap_t *)CFG_IMMR;
+ volatile immap_t *im = (immap_t *)CFG_IMMR;
volatile scc_t *sp;
volatile scc_uart_t *up;
volatile cbd_t *tbdf, *rbdf;
@@ -435,12 +435,12 @@ putDebugChar(const char c)
{
volatile scc_uart_t *up;
volatile cbd_t *tbdf;
- volatile immap_t *im;
+ volatile immap_t *im;
if (c == '\n')
putDebugChar ('\r');
- im = (immap_t *)CFG_IMMR;
+ im = (immap_t *)CFG_IMMR;
up = (scc_uart_t *)&im->im_dprambase[KGDB_PROFF_SCC];
tbdf = (cbd_t *)&im->im_dprambase[up->scc_genscc.scc_tbase];
@@ -469,10 +469,10 @@ getDebugChar(void)
{
volatile cbd_t *rbdf;
volatile scc_uart_t *up;
- volatile immap_t *im;
+ volatile immap_t *im;
unsigned char c;
- im = (immap_t *)CFG_IMMR;
+ im = (immap_t *)CFG_IMMR;
up = (scc_uart_t *)&im->im_dprambase[KGDB_PROFF_SCC];
rbdf = (cbd_t *)&im->im_dprambase[up->scc_genscc.scc_rbase];
diff --git a/cpu/mpc8260/serial_smc.c b/cpu/mpc8260/serial_smc.c
index b0e1ce4f87..0873319339 100644
--- a/cpu/mpc8260/serial_smc.c
+++ b/cpu/mpc8260/serial_smc.c
@@ -74,7 +74,7 @@ static unsigned char brg_map[] = {
int serial_init (void)
{
- volatile immap_t *im = (immap_t *)CFG_IMMR;
+ volatile immap_t *im = (immap_t *)CFG_IMMR;
volatile smc_t *sp;
volatile smc_uart_t *up;
volatile cbd_t *tbdf, *rbdf;
@@ -186,7 +186,7 @@ serial_putc(const char c)
volatile cbd_t *tbdf;
volatile char *buf;
volatile smc_uart_t *up;
- volatile immap_t *im = (immap_t *)CFG_IMMR;
+ volatile immap_t *im = (immap_t *)CFG_IMMR;
if (c == '\n')
serial_putc ('\r');
@@ -220,7 +220,7 @@ serial_getc(void)
volatile cbd_t *rbdf;
volatile unsigned char *buf;
volatile smc_uart_t *up;
- volatile immap_t *im = (immap_t *)CFG_IMMR;
+ volatile immap_t *im = (immap_t *)CFG_IMMR;
unsigned char c;
up = (smc_uart_t *)&(im->im_dprambase[PROFF_SMC]);
@@ -243,7 +243,7 @@ serial_tstc()
{
volatile cbd_t *rbdf;
volatile smc_uart_t *up;
- volatile immap_t *im = (immap_t *)CFG_IMMR;
+ volatile immap_t *im = (immap_t *)CFG_IMMR;
up = (smc_uart_t *)&(im->im_dprambase[PROFF_SMC]);
@@ -289,7 +289,7 @@ serial_tstc()
void
kgdb_serial_init (void)
{
- volatile immap_t *im = (immap_t *)CFG_IMMR;
+ volatile immap_t *im = (immap_t *)CFG_IMMR;
volatile smc_t *sp;
volatile smc_uart_t *up;
volatile cbd_t *tbdf, *rbdf;
@@ -401,7 +401,7 @@ putDebugChar(const char c)
volatile cbd_t *tbdf;
volatile char *buf;
volatile smc_uart_t *up;
- volatile immap_t *im = (immap_t *)CFG_IMMR;
+ volatile immap_t *im = (immap_t *)CFG_IMMR;
if (c == '\n')
putDebugChar ('\r');
@@ -435,7 +435,7 @@ getDebugChar(void)
volatile cbd_t *rbdf;
volatile unsigned char *buf;
volatile smc_uart_t *up;
- volatile immap_t *im = (immap_t *)CFG_IMMR;
+ volatile immap_t *im = (immap_t *)CFG_IMMR;
unsigned char c;
up = (smc_uart_t *)&(im->im_dprambase[KGDB_PROFF_SMC]);
diff --git a/cpu/mpc8260/spi.c b/cpu/mpc8260/spi.c
index 6a2dc8f29b..c1a607ca5d 100644
--- a/cpu/mpc8260/spi.c
+++ b/cpu/mpc8260/spi.c
@@ -213,12 +213,12 @@ void spi_init_f (void)
/***********IMPORTANT******************/
- /*
- * Setting transmit and receive buffer descriptor pointers
- * initially to rbase and tbase. Only the microcode patches
- * documentation talks about initializing this pointer. This
- * is missing from the sample I2C driver. If you dont
- * initialize these pointers, the kernel hangs.
+ /*
+ * Setting transmit and receive buffer descriptor pointers
+ * initially to rbase and tbase. Only the microcode patches
+ * documentation talks about initializing this pointer. This
+ * is missing from the sample I2C driver. If you dont
+ * initialize these pointers, the kernel hangs.
*/
spi->spi_rbptr = spi->spi_rbase;
spi->spi_tbptr = spi->spi_tbase;
diff --git a/cpu/mpc8260/start.S b/cpu/mpc8260/start.S
index 2070ecc5eb..d3fd8652dc 100644
--- a/cpu/mpc8260/start.S
+++ b/cpu/mpc8260/start.S
@@ -966,8 +966,8 @@ in_ram:
/*
* Relocation Function, r14 point to got2+0x8000
*
- * Adjust got2 pointers, no need to check for 0, this code
- * already puts a few entries in the table.
+ * Adjust got2 pointers, no need to check for 0, this code
+ * already puts a few entries in the table.
*/
li r0,__got2_entries@sectoff@l
la r3,GOT(_GOT2_TABLE_)
@@ -981,7 +981,7 @@ in_ram:
bdnz 1b
/*
- * Now adjust the fixups and the pointers to the fixups
+ * Now adjust the fixups and the pointers to the fixups
* in case we need to move ourselves again.
*/
2: li r0,__fixup_entries@sectoff@l
generated by cgit (git 2.34.1) at 2024-12-26 18:53:09 +0000