summaryrefslogtreecommitdiff
path: root/cpu/mpc86xx/start.S
diff options
context:
space:
mode:
Diffstat (limited to 'cpu/mpc86xx/start.S')
-rw-r--r--cpu/mpc86xx/start.S77
1 files changed, 4 insertions, 73 deletions
diff --git a/cpu/mpc86xx/start.S b/cpu/mpc86xx/start.S
index b1a23b4252..48f8c5acf5 100644
--- a/cpu/mpc86xx/start.S
+++ b/cpu/mpc86xx/start.S
@@ -179,20 +179,10 @@ _end_of_vectors:
boot_cold:
boot_warm:
-
- /* if this is a multi-core system we need to check which cpu
- * this is, if it is not cpu 0 send the cpu to the linux reset
- * vector */
-#if (CONFIG_NUM_CPUS > 1)
- mfspr r0, MSSCR0
- andi. r0, r0, 0x0020
- rlwinm r0,r0,27,31,31
- mtspr PIR, r0
- beq 1f
-
- bl secondary_cpu_setup
-#endif
-
+ /*
+ * NOTE: Only Cpu 0 will ever come here. Other cores go to an
+ * address specified by the BPTR
+ */
1:
#ifdef CONFIG_SYS_RAMBOOT
/* disable everything */
@@ -978,63 +968,4 @@ unlock_ram_in_cache:
#endif
#endif
-/* If this is a multi-cpu system then we need to handle the
- * 2nd cpu. The assumption is that the 2nd cpu is being
- * held in boot holdoff mode until the 1st cpu unlocks it
- * from Linux. We'll do some basic cpu init and then pass
- * it to the Linux Reset Vector.
- * Sri: Much of this initialization is not required. Linux
- * rewrites the bats, and the sprs and also enables the L1 cache.
- */
-#if (CONFIG_NUM_CPUS > 1)
-.globl secondary_cpu_setup
-secondary_cpu_setup:
- /* Do only core setup on all cores except cpu0 */
- bl invalidate_bats
- sync
- bl enable_ext_addr
-#ifdef CONFIG_SYS_L2
- /* init the L2 cache */
- addis r3, r0, L2_INIT@h
- ori r3, r3, L2_INIT@l
- sync
- mtspr l2cr, r3
-#ifdef CONFIG_ALTIVEC
- dssall
-#endif
- /* invalidate the L2 cache */
- bl l2cache_invalidate
- sync
-#endif
-
- /* enable and invalidate the data cache */
- bl dcache_enable
- sync
-
- /* enable and invalidate the instruction cache*/
- bl icache_enable
- sync
-
- /* TBEN in HID0 */
- mfspr r4, HID0
- oris r4, r4, 0x0400
- mtspr HID0, r4
- sync
- isync
-
- /* MCP|SYNCBE|ABE in HID1 */
- mfspr r4, HID1
- oris r4, r4, 0x8000
- ori r4, r4, 0x0C00
- mtspr HID1, r4
- sync
- isync
-
- lis r3, CONFIG_LINUX_RESET_VEC@h
- ori r3, r3, CONFIG_LINUX_RESET_VEC@l
- mtlr r3
- blr
-
- /* Never Returns, Running in Linux Now */
-#endif