diff options
Diffstat (limited to 'cpu/mpc8xxx')
| -rw-r--r-- | cpu/mpc8xxx/ddr/main.c | 37 | ||||
| -rw-r--r-- | cpu/mpc8xxx/ddr/options.c | 80 |
2 files changed, 112 insertions, 5 deletions
diff --git a/cpu/mpc8xxx/ddr/main.c b/cpu/mpc8xxx/ddr/main.c index 700b897172..21a16d97e1 100644 --- a/cpu/mpc8xxx/ddr/main.c +++ b/cpu/mpc8xxx/ddr/main.c @@ -164,6 +164,24 @@ int step_assign_addresses(fsl_ddr_info_t *pinfo, } if (j == 2) { *memctl_interleaving = 1; + + printf("\nMemory controller interleaving enabled: "); + + switch (pinfo->memctl_opts[0].memctl_interleaving_mode) { + case FSL_DDR_CACHE_LINE_INTERLEAVING: + printf("Cache-line interleaving!\n"); + break; + case FSL_DDR_PAGE_INTERLEAVING: + printf("Page interleaving!\n"); + break; + case FSL_DDR_BANK_INTERLEAVING: + printf("Bank interleaving!\n"); + break; + case FSL_DDR_SUPERBANK_INTERLEAVING: + printf("Super bank interleaving\n"); + default: + break; + } } /* Check that all controllers are rank interleaving. */ @@ -175,6 +193,25 @@ int step_assign_addresses(fsl_ddr_info_t *pinfo, } if (j == 2) { *rank_interleaving = 1; + + printf("Bank(chip-select) interleaving enabled: "); + + switch (pinfo->memctl_opts[0].ba_intlv_ctl & + FSL_DDR_CS0_CS1_CS2_CS3) { + case FSL_DDR_CS0_CS1_CS2_CS3: + printf("CS0+CS1+CS2+CS3\n"); + break; + case FSL_DDR_CS0_CS1: + printf("CS0+CS1\n"); + break; + case FSL_DDR_CS2_CS3: + printf("CS2+CS3\n"); + break; + case FSL_DDR_CS0_CS1_AND_CS2_CS3: + printf("CS0+CS1 and CS2+CS3\n"); + default: + break; + } } if (*memctl_interleaving) { diff --git a/cpu/mpc8xxx/ddr/options.c b/cpu/mpc8xxx/ddr/options.c index 99b5685664..714e88d7fa 100644 --- a/cpu/mpc8xxx/ddr/options.c +++ b/cpu/mpc8xxx/ddr/options.c @@ -22,6 +22,7 @@ unsigned int populate_memctl_options(int all_DIMMs_registered, unsigned int ctrl_num) { unsigned int i; + const char *p; /* Chip select options. */ @@ -181,17 +182,86 @@ unsigned int populate_memctl_options(int all_DIMMs_registered, #error "FIXME determine four activates for DDR3" #endif - /* ODT should only be used for DDR2 */ - - /* FIXME? */ - /* - * Interleaving checks. + * Check interleaving configuration from environment. + * Please refer to doc/README.fsl-ddr for the detail. * * If memory controller interleaving is enabled, then the data * bus widths must be programmed identically for the 2 memory * controllers. + * + * XXX: Attempt to set both controllers to the same chip select + * interleaving mode. It will do a best effort to get the + * requested ranks interleaved together such that the result + * should be a subset of the requested configuration. */ + if ((p = getenv("memctl_intlv_ctl")) != NULL) { + if (pdimm[0].n_ranks == 0) { + printf("There is no rank on CS0. Because only rank on \ + CS0 and ranks chip-select interleaved with CS0\ + are controller interleaved, force non memory \ + controller interleaving\n"); + popts->memctl_interleaving = 0; + } else { + popts->memctl_interleaving = 1; + if (strcmp(p, "cacheline") == 0) + popts->memctl_interleaving_mode = + FSL_DDR_CACHE_LINE_INTERLEAVING; + else if (strcmp(p, "page") == 0) + popts->memctl_interleaving_mode = + FSL_DDR_PAGE_INTERLEAVING; + else if (strcmp(p, "bank") == 0) + popts->memctl_interleaving_mode = + FSL_DDR_BANK_INTERLEAVING; + else if (strcmp(p, "superbank") == 0) + popts->memctl_interleaving_mode = + FSL_DDR_SUPERBANK_INTERLEAVING; + else + popts->memctl_interleaving_mode = + simple_strtoul(p, NULL, 0); + } + } + + if( (p = getenv("ba_intlv_ctl")) != NULL) { + if (strcmp(p, "cs0_cs1") == 0) + popts->ba_intlv_ctl = FSL_DDR_CS0_CS1; + else if (strcmp(p, "cs2_cs3") == 0) + popts->ba_intlv_ctl = FSL_DDR_CS2_CS3; + else if (strcmp(p, "cs0_cs1_and_cs2_cs3") == 0) + popts->ba_intlv_ctl = FSL_DDR_CS0_CS1_AND_CS2_CS3; + else if (strcmp(p, "cs0_cs1_cs2_cs3") == 0) + popts->ba_intlv_ctl = FSL_DDR_CS0_CS1_CS2_CS3; + else + popts->ba_intlv_ctl = simple_strtoul(p, NULL, 0); + + switch (popts->ba_intlv_ctl & FSL_DDR_CS0_CS1_CS2_CS3) { + case FSL_DDR_CS0_CS1_CS2_CS3: + case FSL_DDR_CS0_CS1: + if (pdimm[0].n_ranks != 2) { + popts->ba_intlv_ctl = 0; + printf("No enough bank(chip-select) for \ + CS0+CS1, force non-interleaving!\n"); + } + break; + case FSL_DDR_CS2_CS3: + if (pdimm[1].n_ranks !=2){ + popts->ba_intlv_ctl = 0; + printf("No enough bank(CS) for CS2+CS3, \ + force non-interleaving!\n"); + } + break; + case FSL_DDR_CS0_CS1_AND_CS2_CS3: + if ((pdimm[0].n_ranks != 2)||(pdimm[1].n_ranks != 2)) { + popts->ba_intlv_ctl = 0; + printf("No enough bank(CS) for CS0+CS1 or \ + CS2+CS3, force non-interleaving!\n"); + } + break; + default: + popts->ba_intlv_ctl = 0; + break; + } + } fsl_ddr_board_options(popts, pdimm, ctrl_num); |