diff options
Diffstat (limited to 'cpu/ppc4xx')
| -rw-r--r-- | cpu/ppc4xx/44x_spd_ddr2.c | 27 | ||||
| -rw-r--r-- | cpu/ppc4xx/cpu_init.c | 16 |
2 files changed, 38 insertions, 5 deletions
diff --git a/cpu/ppc4xx/44x_spd_ddr2.c b/cpu/ppc4xx/44x_spd_ddr2.c index 1c3632428c..c7ed161fde 100644 --- a/cpu/ppc4xx/44x_spd_ddr2.c +++ b/cpu/ppc4xx/44x_spd_ddr2.c @@ -2172,6 +2172,11 @@ static void program_memory_queue(unsigned long *dimm_populated, unsigned long i; unsigned long bank_0_populated = 0; phys_size_t total_size = 0; +#if defined(CONFIG_440SP) || defined(CONFIG_440SPE) || \ + defined(CONFIG_460EX) || defined(CONFIG_460GT) || \ + defined(CONFIG_460SX) + unsigned long val; +#endif /*------------------------------------------------------------------ * Reset the rank_base_address. @@ -2249,17 +2254,31 @@ static void program_memory_queue(unsigned long *dimm_populated, } } -#if defined(CONFIG_460EX) || defined(CONFIG_460GT) +#if defined(CONFIG_440SP) || defined(CONFIG_440SPE) || \ + defined(CONFIG_460EX) || defined(CONFIG_460GT) || \ + defined(CONFIG_460SX) + /* - * Enable high bandwidth access on 460EX/GT. - * This should/could probably be done on other - * PPC's too, like 440SPe. + * Enable high bandwidth access * This is currently not used, but with this setup * it is possible to use it later on in e.g. the Linux * EMAC driver for performance gain. */ mtdcr(SDRAM_PLBADDULL, 0x00000000); /* MQ0_BAUL */ mtdcr(SDRAM_PLBADDUHB, 0x00000008); /* MQ0_BAUH */ + + /* + * Set optimal value for Memory Queue HB/LL Configuration registers + */ + + val = (mfdcr(SDRAM_CONF1HB) | SDRAM_CONF1HB_AAFR | SDRAM_CONF1HB_RPEN | SDRAM_CONF1HB_RFTE); + mtdcr(SDRAM_CONF1HB, val); + + val = (mfdcr(SDRAM_CONF1LL) | SDRAM_CONF1LL_AAFR | SDRAM_CONF1LL_RPEN | SDRAM_CONF1LL_RFTE); + mtdcr(SDRAM_CONF1LL, val); + + val = (mfdcr(SDRAM_CONFPATHB) | SDRAM_CONFPATHB_TPEN); + mtdcr(SDRAM_CONFPATHB, val); #endif } diff --git a/cpu/ppc4xx/cpu_init.c b/cpu/ppc4xx/cpu_init.c index e2d0402781..281819af60 100644 --- a/cpu/ppc4xx/cpu_init.c +++ b/cpu/ppc4xx/cpu_init.c @@ -138,7 +138,9 @@ void reconfigure_pll(u32 new_cpu_freq) void cpu_init_f (void) { -#if defined(CONFIG_WATCHDOG) || defined(CONFIG_440GX) || defined(CONFIG_460EX) +#if defined(CONFIG_WATCHDOG) || defined(CONFIG_440GX) || defined(CONFIG_460EX) || \ + defined(CONFIG_440SP) || defined(CONFIG_440SPE) || defined(CONFIG_405EX) || \ + defined(CONFIG_460GT) || defined(CONFIG_460SX) u32 val; #endif @@ -301,6 +303,18 @@ cpu_init_f (void) val |= 0x400; mtsdr(SDR0_USB2HOST_CFG, val); #endif /* CONFIG_460EX */ + +#if defined(CONFIG_440SP) || defined(CONFIG_440SPE) || \ + defined(CONFIG_460EX) || defined(CONFIG_460GT) || \ + defined(CONFIG_405EX) || defined(CONFIG_460SX) + /* + * Set PLB4 arbiter (Segment 0 and 1) to 4 deep pipeline read + */ + val = (mfdcr(plb0_acr) & ~plb0_acr_rdp_mask) | plb0_acr_rdp_4deep; + mtdcr(plb0_acr, val); + val = (mfdcr(plb1_acr) & ~plb1_acr_rdp_mask) | plb1_acr_rdp_4deep; + mtdcr(plb1_acr, val); +#endif /* CONFIG_440SP/SPE || CONFIG_460EX/GT || CONFIG_405EX */ } /* |